Simulation of the Long-Term Effects of Decentralized and Adaptive Investments in Cross-Agency Interoperable and Standard IT Systems

Governments have come under increasing pressure to promote horizontal flows of information across agencies, but investment in cross-agency interoperable and standard systems have been minimally made since it seems to require government agencies to give up the autonomies in managing own systems and its outcomes may be subject to many external and interaction risks. By producing an agent-based model using 'Blanche' software, this study provides policy-makers with a simulation-based demonstration illustrating how government agencies can autonomously and interactively build, standardize, and operate interoperable IT systems in a decentralized environment. This simulation designs an illustrative body of 20 federal agencies and their missions. A multiplicative production function is adopted to model the interdependent effects of heterogeneous systems on joint mission capabilities, and six social network drivers (similarity, reciprocity, centrality, mission priority, interdependencies, and transitivity) are assumed to jointly determine inter-agency system utilization. This exercise simulates five policy alternatives derived from joint implementation of three policy levers (IT investment portfolio, standardization, and inter-agency operation). The simulation results show that modest investments in standard systems improve interoperability remarkably, but that a wide range of untargeted interoperability with lagging operational capabilities improves mission capability less remarkably. Nonetheless, exploratory modeling against the varying parameters for technology, interdependency, and social capital demonstrates that the wide range of untargeted interoperability responds better to uncertain future states and hence reduces the variances of joint mission capabilities. In sum, decentralized and adaptive investments in interoperable and standard systems can enhance joint mission capabilities substantially and robustly without requiring radical changes toward centralized IT management.Public IT Investment, Interoperability, Standardization, Social Network, Agent-Based Modeling, Exploratory Modeling

From Social Simulation to Integrative System Design

As the recent financial crisis showed, today there is a strong need to gain "ecological perspective" of all relevant interactions in socio-economic-techno-environmental systems. For this, we suggested to set-up a network of Centers for integrative systems design, which shall be able to run all potentially relevant scenarios, identify causality chains, explore feedback and cascading effects for a number of model variants, and determine the reliability of their implications (given the validity of the underlying models). They will be able to detect possible negative side effect of policy decisions, before they occur. The Centers belonging to this network of Integrative Systems Design Centers would be focused on a particular field, but they would be part of an attempt to eventually cover all relevant areas of society and economy and integrate them within a "Living Earth Simulator". The results of all research activities of such Centers would be turned into informative input for political Decision Arenas. For example, Crisis Observatories (for financial instabilities, shortages of resources, environmental change, conflict, spreading of diseases, etc.) would be connected with such Decision Arenas for the purpose of visualization, in order to make complex interdependencies understandable to scientists, decision-makers, and the general public.Comment: 34 pages, Visioneer White Paper, see http://www.visioneer.ethz.c

MODELLING & SIMULATION HYBRID WARFARE Researches, Models and Tools for Hybrid Warfare and Population Simulation

The Hybrid Warfare phenomena, which is the subject of the current research, has been framed by the work of Professor Agostino Bruzzone (University of Genoa) and Professor Erdal Cayirci (University of Stavanger), that in June 2016 created in order to inquiry the subject a dedicated Exploratory Team, which was endorsed by NATO Modelling & Simulation Group (a panel of the NATO Science & Technology organization) and established with the participation as well of the author. The author brought his personal contribution within the ET43 by introducing meaningful insights coming from the lecture of \u201cFight by the minutes: Time and the Art of War (1994)\u201d, written by Lieutenant Colonel US Army (Rtd.) Robert Leonhard; in such work, Leonhard extensively developed the concept that \u201cTime\u201d, rather than geometry of the battlefield and/or firepower, is the critical factor to tackle in military operations and by extension in Hybrid Warfare. The critical reflection about the time - both in its quantitative and qualitative dimension - in a hybrid confrontation it is addressed and studied inside SIMCJOH, a software built around challenges that imposes literally to \u201cFight by the minutes\u201d, echoing the core concept expressed in the eponymous work. Hybrid Warfare \u2013 which, by definition and purpose, aims to keep the military commitment of both aggressor and defender at the lowest - can gain enormous profit by employing a wide variety of non-military tools, turning them into a weapon, as in the case of the phenomena of \u201cweaponization of mass migrations\u201d, as it is examined in the \u201cDies Irae\u201d simulation architecture. Currently, since migration it is a very sensitive and divisive issue among the public opinions of many European countries, cynically leveraging on a humanitarian emergency caused by an exogenous, inducted migration, could result in a high level of political and social destabilization, which indeed favours the concurrent actions carried on by other hybrid tools. Other kind of disruption however, are already available in the arsenal of Hybrid Warfare, such cyber threats, information campaigns lead by troll factories for the diffusion of fake/altered news, etc. From this perspective the author examines how the TREX (Threat network simulation for REactive eXperience) simulator is able to offer insights about a hybrid scenario characterized by an intense level of social disruption, brought by cyber-attacks and systemic faking of news. Furthermore, the rising discipline of \u201cStrategic Engineering\u201d, as envisaged by Professor Agostino Bruzzone, when matched with the operational requirements to fulfil in order to counter Hybrid Threats, it brings another innovative, as much as powerful tool, into the professional luggage of the military and the civilian employed in Defence and Homeland security sectors. Hybrid is not the New War. What is new is brought by globalization paired with the transition to the information age and rising geopolitical tensions, which have put new emphasis on hybrid hostilities that manifest themselves in a contemporary way. Hybrid Warfare is a deliberate choice of an aggressor. While militarily weak nations can resort to it in order to re-balance the odds, instead military strong nations appreciate its inherent effectiveness coupled with the denial of direct responsibility, thus circumventing the rules of the International Community (IC). In order to be successful, Hybrid Warfare should consist of a highly coordinated, sapient mix of diverse and dynamic combination of regular forces, irregular forces (even criminal elements), cyber disruption etc. all in order to achieve effects across the entire DIMEFIL/PMESII_PT spectrum. However, the owner of the strategy, i.e. the aggressor, by keeping the threshold of impunity as high as possible and decreasing the willingness of the defender, can maintain his Hybrid Warfare at a diplomatically feasible level; so the model of the capacity, willingness and threshold, as proposed by Cayirci, Bruzzone and Gunneriusson (2016), remains critical to comprehend Hybrid Warfare. Its dynamicity is able to capture the evanescent, blurring line between Hybrid Warfare and Conventional Warfare. In such contest time is the critical factor: this because it is hard to foreseen for the aggressor how long he can keep up with such strategy without risking either the retaliation from the International Community or the depletion of resources across its own DIMEFIL/PMESII_PT spectrum. Similar discourse affects the defender: if he isn\u2019t able to cope with Hybrid Threats (i.e. taking no action), time works against him; if he is, he can start to develop counter narrative and address physical countermeasures. However, this can lead, in the medium long period, to an unforeseen (both for the attacker and the defender) escalation into a large, conventional, armed conflict. The performance of operations that required more than kinetic effects drove the development of DIMEFIL/PMESII_PT models and in turn this drive the development of Human Social Culture Behavior Modelling (HCSB), which should stand at the core of the Hybrid Warfare modelling and simulation efforts. Multi Layers models are fundamental to evaluate Strategies and Support Decisions: currently there are favourable conditions to implement models of Hybrid Warfare, such as Dies Irae, SIMCJOH and TREX, in order to further develop tools and war-games for studying new tactics, execute collective training and to support decisions making and analysis planning. The proposed approach is based on the idea to create a mosaic made by HLA interoperable simulators able to be combined as tiles to cover an extensive part of the Hybrid Warfare, giving the users an interactive and intuitive environment based on the \u201cModelling interoperable Simulation and Serious Game\u201d (MS2G) approach. From this point of view, the impressive capabilities achieved by IA-CGF in human behavior modeling to support population simulation as well as their native HLA structure, suggests to adopt them as core engine in this application field. However, it necessary to highlight that, when modelling DIMEFIL/PMESII_PT domains, the researcher has to be aware of the bias introduced by the fact that especially Political and Social \u201cscience\u201d are accompanied and built around value judgement. From this perspective, the models proposed by Cayirci, Bruzzone, Guinnarson (2016) and by Balaban & Mileniczek (2018) are indeed a courageous tentative to import, into the domain of particularly poorly understood phenomena (social, politics, and to a lesser degree economics - Hartley, 2016), the mathematical and statistical instruments and the methodologies employed by the pure, hard sciences. Nevertheless, just using the instruments and the methodology of the hard sciences it is not enough to obtain the objectivity, and is such aspect the representations of Hybrid Warfare mechanics could meet their limit: this is posed by the fact that they use, as input for the equations that represents Hybrid Warfare, not physical data observed during a scientific experiment, but rather observation of the reality that assumes implicitly and explicitly a value judgment, which could lead to a biased output. Such value judgement it is subjective, and not objective like the mathematical and physical sciences; when this is not well understood and managed by the academic and the researcher, it can introduce distortions - which are unacceptable for the purpose of the Science - which could be used as well to enforce a narrative mainstream that contains a so called \u201ctruth\u201d, which lies inside the boundary of politics rather than Science. Those observations around subjectivity of social sciences vs objectivity of pure sciences, being nothing new, suggest however the need to examine the problem under a new perspective, less philosophical and more leaned toward the practical application. The suggestion that the author want make here is that the Verification and Validation process, in particular the methodology used by Professor Bruzzone in doing V&V for SIMCJOH (2016) and the one described in the Modelling & Simulation User Risk Methodology (MURM) developed by Pandolfini, Youngblood et all (2018), could be applied to evaluate if there is a bias and the extent of the it, or at least making clear the value judgment adopted in developing the DIMEFIL/PMESII_PT models. Such V&V research is however outside the scope of the present work, even though it is an offspring of it, and for such reason the author would like to make further inquiries on this particular subject in the future. Then, the theoretical discourse around Hybrid Warfare has been completed addressing the need to establish a new discipline, Strategic Engineering, very much necessary because of the current a political and economic environment which allocates diminishing resources to Defense and Homeland Security (at least in Europe). However, Strategic Engineering can successfully address its challenges when coupled with the understanding and the management of the fourth dimension of military and hybrid operations, Time. For the reasons above, and as elaborated by Leonhard and extensively discussed in the present work, addressing the concern posed by Time dimension is necessary for the success of any military or Hybrid confrontation. The SIMCJOH project, examined under the above perspective, proved that the simulator has the ability to address the fourth dimension of military and non-military confrontation. In operations, Time is the most critical factor during execution, and this was successfully transferred inside the simulator; as such, SIMCJOH can be viewed as a training tool and as well a dynamic generator of events for the MEL/MIL execution during any exercise. In conclusion, SIMCJOH Project successfully faces new challenging aspects, allowed to study and develop new simulation models in order to support decision makers, Commanders and their Staff. Finally, the question posed by Leonhard in terms of recognition of the importance of time management of military operations - nowadays Hybrid Conflict - has not been answered yet; however, the author believes that Modelling and Simulation tools and techniques can represent the safe \u201ctank\u201d where innovative and advanced scientific solutions can be tested, exploiting the advantage of doing it in a synthetic environment

A distributed simulation methodological framework for OR/MS applications

Distributed Simulation (DS) allows existing models to be composed together to form sim- ulations of large-scale systems, or large models to be divided into models that execute on separate computers. Among its claimed benefits are model reuse, speedup, data pri- vacy and data consistency. DS is arguably widely used in the defence sector. However, it is rarely used in Operations Research and Management Science (OR/MS) applications in areas such as manufacturing and healthcare, despite its potential advantages. The main barriers to use DS in OR/MS are the technical complexity in implementation and a gap between the world views of DS and OR/MS communities. In this paper, we propose a new method that attempts to link together the methodological practices of OR/MS and DS. Using a rep- resentative case study, we show that our methodological framework simplifies significantly DS implementation.This research was funded by the Multidisciplinary Assessment of Technology Centre for Healthcare (MATCH), an Innova- tive Manufacturing Research Centre (IMRC) funded by the Engineering and Physical Sciences Research Council (EPSRC) (Ref: EP/F063822/1 )

A distributed simulation methodological framework for OR/MS applications

Distributed Simulation (DS) allows existing models to be composed together to form sim- ulations of large-scale systems, or large models to be divided into models that execute on separate computers. Among its claimed benefits are model reuse, speedup, data pri- vacy and data consistency. DS is arguably widely used in the defence sector. However, it is rarely used in Operations Research and Management Science (OR/MS) applications in areas such as manufacturing and healthcare, despite its potential advantages. The main barriers to use DS in OR/MS are the technical complexity in implementation and a gap between the world views of DS and OR/MS communities. In this paper, we propose a new method that attempts to link together the methodological practices of OR/MS and DS. Using a rep- resentative case study, we show that our methodological framework simplifies significantly DS implementation.This research was funded by the Multidisciplinary Assessment of Technology Centre for Healthcare (MATCH), an Innova- tive Manufacturing Research Centre (IMRC) funded by the Engineering and Physical Sciences Research Council (EPSRC) (Ref: EP/F063822/1 )

INTEROPERABILITY FOR MODELING AND SIMULATION IN MARITIME EXTENDED FRAMEWORK

This thesis reports on the most relevant researches performed during the years of the Ph.D. at the Genova University and within the Simulation Team. The researches have been performed according to M&S well known recognized standards. The studies performed on interoperable simulation cover all the environments of the Extended Maritime Framework, namely Sea Surface, Underwater, Air, Coast & Land, Space and Cyber Space. The applications cover both the civil and defence domain. The aim is to demonstrate the potential of M&S applications for the Extended Maritime Framework, applied to innovative unmanned vehicles as well as to traditional assets, human personnel included. A variety of techniques and methodology have been fruitfully applied in the researches, ranging from interoperable simulation, discrete event simulation, stochastic simulation, artificial intelligence, decision support system and even human behaviour modelling

Analysis and evaluation of multi-agent systems for digital production planning and control

Industrial manufacturing companies have different IT control functions that can be represented with a so-called hierarchical automation pyramid. While these conventional software systems especially support the mass production with consistent demand, the future project “Industry 4.0” focuses on customer-oriented and adaptable production processes. In order to move from conventional production systems to a factory of the future, the control levels must be redistributed. With the help of cyber-physical production systems, an interoperable architecture must be, implemented which removes the hierarchical connection of the former control levels. The accompanied digitalisation of industrial companies makes the transition to modular production possible. At the same time, the requirements for production planning and control are increasing, which can be solved with approaches such as multi-agent systems (MASs). These software solutions are autonomous and intelligent objects with a distinct collaborative ability. There are different modelling methods, communication and interaction structures, as well as different development frameworks for these new systems. Since multi-agent systems have not yet been established as an industrial standard due to their high complexity, they are usually only tested in simulations. In this bachelor thesis, a detailed literature review on the topic of MASs in the field of production planning and control is presented. In addition, selected multi-agent approaches are evaluated and compared using specific classification criteria. In addition, the applicability of using these systems in digital and modular production is assessed

A systematic methodology to analyse the performance and design configurations of business interoperability in cooperative industrial networks

This thesis proposes a methodology for modelling business interoperability in a context of cooperative industrial networks. The purpose is to develop a methodology that enables the design of cooperative industrial network platforms that are able to deliver business interoperability and the analysis of its impact on the performance of these platforms. To achieve the proposed objective, two modelling tools have been employed: the Axiomatic Design Theory for the design of interoperable platforms; and Agent-Based Simulation for the analysis of the impact of business interoperability. The sequence of the application of the two modelling tools depends on the scenario under analysis, i.e. whether the cooperative industrial network platform exists or not. If the cooperative industrial network platform does not exist, the methodology suggests first the application of the Axiomatic Design Theory to design different configurations of interoperable cooperative industrial network platforms, and then the use of Agent-Based Simulation to analyse or predict the business interoperability and operational performance of the designed configurations. Otherwise, one should start by analysing the performance of the existing platform and based on the achieved results, decide whether it is necessary to redesign it or not. If the redesign is needed, simulation is once again used to predict the performance of the redesigned platform. To explain how those two modelling tools can be applied in practice, a theoretical modelling framework, a theoretical Axiomatic Design model and a theoretical Agent-Based Simulation model are proposed. To demonstrate the applicability of the proposed methodology and/or to validate the proposed theoretical models, a case study regarding a Portuguese Reverse Logistics cooperative network (Valorpneu network) and a case study regarding a Portuguese construction project (Dam Baixo Sabor network) are presented. The findings of the application of the proposed methodology to these two case studies suggest that indeed the Axiomatic Design Theory can effectively contribute in the design of interoperable cooperative industrial network platforms and that Agent-Based Simulation provides an effective set of tools for analysing the impact of business interoperability on the performance of those platforms. However, these conclusions cannot be generalised as only two case studies have been carried out. In terms of relevance to theory, this is the first time that the network effect is addressed in the analysis of the impact of business interoperability on the performance of networked companies and also the first time that a holistic approach is proposed to design interoperable cooperative industrial network platforms. Regarding the practical implications, the proposed methodology is intended to provide industrial managers a management tool that can guide them easily, and in practical and systematic way, in the design of configurations of interoperable cooperative industrial network platforms and/or in the analysis of the impact of business interoperability on the performance of their companies and the networks where their companies operate

Monitoring and Information Alignment in Pursuit of an IoT-Enabled Self-Sustainable Interoperability

To remain competitive with big corporations, small and medium-sized enterprises (SMEs) often need to be more dynamic, adapt to new business situations, react faster, and thereby survive in today‘s global economy. To do so, SMEs normally seek to create consortiums, thus gaining access to new and more opportunities. However, this strategy may also lead to complications. Due to the different sources of enterprise models and semantics, organizations are experiencing difficulties in seamlessly exchanging vital information via electronic means. In their attempt to address this issue, most seek to achieve interoperability by establishing peer-to-peer mappings with different business partners, or by using neutral data standards to regulate communications in optimized networks. Moreover, systems are more and more dynamic, frequently changing to answer new customer‘s requirements, causing new interoperability problems and a reduction of efficiency. Another situation that is constantly changing is the devices used in the enterprises, as the Enterprise Information Systems, devices are used to register internal data, and to be used to monitor several aspects. These devices are constantly changing, following the evolution and growth of the market. So, it is important to monitor these devices and doing a model representation of them. This dissertation proposes a self-sustainable interoperable framework to monitor existing enterprise information systems and their devices, monitor the device/enterprise network for changes and automatically detecting model changes. With this, network harmonization disruptions are detected in a timely way, and possible solutions are suggested to regain the interoperable status, thus enhancing robustness for reaching sustainability of business networks along time