724 research outputs found
Wideband and UWB antennas for wireless applications. A comprehensive review
A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems
A Compact Monopole Antenna With Filtering Response for WLAN Applications
A novel compact monopole antenna with filtering response for WLAN applications is presented in this paper. The antenna is composed of a capacity-loaded matching patch, two resonators, and two end-coupled monopoles. The resonators consist of wide rectangular patches and narrow shorted lines to form the resonance, and the resonators are printed on the different layers to increase the design flexibility. Two meandering monopoles are located at the edges of the top layer with capacitive coupling at each other's end. The mutual couplings between the meander monopoles are utilized to produce two radiation nulls at the two band-edges. Based on the design method, the prototype of the proposed antenna was designed, fabricated and measured. The measured results show that the antenna has a broad bandwidth of 16% for S 11 <; -10 dB. Also, ideal omnidirectional radiation patterns, and steep band-edge selectivity with two radiation nulls are achieved for the proposed antenna
Dual-polarized 28-GHz air-filled SIW phased antenna array for next-generation cellular systems
A high-performance dual-polarized eight-element air-filled substrate-integrated-waveguide (AFSIW) cavity-backed patch antenna array is presented. The antenna operates in the [26.5-29.5] GHz band and provides a stable high data-rate wireless communication link between end-user terminals and access points in next-generation cellular systems. Its topology is carefully selected to maximize the performance of the array. In addition, by combining the AFSIW technology with a new antenna architecture, a low-profile, low-cost, stable, and high-performance array design is guaranteed. A prototype was fabricated and validated, demonstrating a wide active impedance bandwidth over ±35 o scanning range and low-cross polarization level within the entire frequency band
Radiation performance enhancement of an ultra wide band antenna using metamaterial band-pass filter
In this paper, a metamaterial structure based on Frequency Selective Surface (FSS) cell is proposed to achieve an isotropic band-pass filtering response. This filter consists of a planar layer formed by a 3×3 metamaterials cell array with transmittive filtering behavior at 3.5 GHz. This design with 45 mm × 45 mm dimension is then integrated in close proximity at distance of 10 mm with an Ultra Wide Band (UWB) antenna to enhance it’ s performances around a 3.5 GHz operating frequency. Simulation results ensure that filter geometry provides the advantage of polarization independency and also exhibits the angular stability up to 45◦ for both Transverse Electric (TE) and Transverse magnetic (TM) modes. More importantly, enhancement in antenna radiation pattern characteristics is illustrated when the planar FSS layer is integrated at a small distance from the radiator. Moreover, antenna gain was improved to 3.22 dBi, adaptation of antenna port (S11) was increased to -53.26 dB and antenna bandwidth reduction to 1.7 GHz is also detected. All these performances make the proposed design as a good choice used to shield signals in UWB wireless applications especially for connected object in 5G
Recommended from our members
Recent developments of reconfigurable antennas for 4G and 5G wireless communications: A survey
YesReconfigurable antennas play important roles in smart and
adaptive systems and are the subject of many research studies. They
offer several advantages such as multifunctional capabilities, minimized volume requirements, low front-end processing efforts with
no need for a filtering element, good isolation, and sufficient out-ofband rejection; these make them well suited for use in wireless applications such as fourth generation (4G) and fifth generation (5G)
mobile terminals. With the use of active materials such as microelectromechanical systems (MEMS), varactor or p-i-n (PIN) diodes, an
antenna’s characteristics can be changed through altering the current
flow on the antenna structure. If an antenna is to be reconfigurable
into many different states, it needs to have an adequate number of
active elements. However, a large number of high-quality active elements increases cost, and necessitates complex biasing networks and
control circuitry.
We review some recently proposed reconfigurable antenna designs suitable for use in wireless communications such as cognitiveratio (CR), multiple-input multiple-output (MIMO), ultra-wideband
(UWB), and 4G/5G mobile terminals. Several examples of antennas
with different reconfigurability functions are analyzed and their performances are compared. Characteristics and fundamental properties
of reconfigurable antennas with single and multiple reconfigurability
modes are investigated.European Union’s Horizon 2020 research and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424
Pattern and Polarization Diversity Multi-Sector Annular Antenna for IoT Applications
This work proposes a small pattern and polarization diversity multi-sector
annular antenna with electrical size and profile of and
, respectively. The antenna is planar and comprises annular
sectors that are fed using different ports to enable digital beamforming
techniques, with efficiency and gain of up to 78% and 4.62 dBi, respectively.
The cavity mode analysis is used to describe the design concept and the antenna
diversity. The proposed method can produce different polarization states (e.g.
linearly and circularly polarized patterns), and pattern diversity
characteristics covering the elevation plane. Owing to its small electrical
size, low-profile and diversity properties, the solution shows good promise to
enable advanced radio applications like wireless physical layer security in
many emerging and size-constrained Internet of Things (IoT) devices.Comment: IEEE Transactions on Antennas and Propagatio
Reconfigurable and multi-functional antennas
This thesis describes a research into multi-frequency and filtering antennas. Several novel antennas are presented, each of which addresses a specific issue for future communication systems, in terms of multi-frequency operation, and filtering capability. These antennas seem to be good candidates for implementation in future multiband radios, cognitive radio (CR), and software defined radio (SDR). The filtering antenna provides an additional filtering action which greatly improves the noise performance and reduces the need for filtering circuitry in the RF front end.
Two types of frequency reconfigurable antennas are presented. One is tunable left-handed loop over ground plane and the second is slot-fed reconfigurable patch. The operating frequency of the left handed loop is reconfigured by loading varactor diodes whilst the frequency agility in the patch is achieved by inserting switches in the coupling slot. The length of the slot is altered by activating the switches.
Compact microstrip antennas with filtering capabilities are presented in this thesis. Two filtering antennas are presented. Whilst the first one consists of three edge-coupled patches, the second filtering antenna consists of rectangular patch coupled to two hairpin resonators. The proposed antennas combine radiating and filtering functions by providing good out of band gain suppression
RF Wireless Power Transfer for EIT Neonate Lung Function Monitoring
This paper presents an antenna-based RF wireless power and data transfer system for wireless neonate lung function monitoring in an intensive care unit using electrical impedance tomography (EIT). The proposed dual-band system comprises a directional slotted patch transmit antenna and a slotted flexible omnidirectional monopole antenna operating at 2.51 GHz and 5.1 GHz. A slotting technique unique to each antenna is proposed to achieve dual-band operation and size miniaturization for each antenna. Also, the arraying technique combined with parasitic elements is employed to increase the receive antenna gain and in turn the received power level. Both transmit and receive antennas were simulated and fabricated. Following FCC safety regulations, measurements show 20 mW received power when the receiver and the transmitter are spaced 19 cm apart
Antennas and Propagation Aspects for Emerging Wireless Communication Technologies
The increasing demand for high data rate applications and the delivery of zero-latency multimedia content drives technological evolutions towards the design and implementation of next-generation broadband wireless networks. In this context, various novel technologies have been introduced, such as millimeter wave (mmWave) transmission, massive multiple input multiple output (MIMO) systems, and non-orthogonal multiple access (NOMA) schemes in order to support the vision of fifth generation (5G) wireless cellular networks. The introduction of these technologies, however, is inextricably connected with a holistic redesign of the current transceiver structures, as well as the network architecture reconfiguration. To this end, ultra-dense network deployment along with distributed massive MIMO technologies and intermediate relay nodes have been proposed, among others, in order to ensure an improved quality of services to all mobile users. In the same framework, the design and evaluation of novel antenna configurations able to support wideband applications is of utmost importance for 5G context support. Furthermore, in order to design reliable 5G systems, the channel characterization in these frequencies and in the complex propagation environments cannot be ignored because it plays a significant role. In this Special Issue, fourteen papers are published, covering various aspects of novel antenna designs for broadband applications, propagation models at mmWave bands, the deployment of NOMA techniques, radio network planning for 5G networks, and multi-beam antenna technologies for 5G wireless communications
Design a new notched UWB antenna to rejected unwonted band for wireless communication
This paper presents a slotted design for ultra-wideband (UWB) antenna. Design of a rectangular UWB antenna covering the frequency range 3.1-10.6 GHz, to achieve notch characteristics in the bands at 3.1-8.4 GHz and 8.6-10.6 GHz. By changing the direction of distribution of current to apply this technique by inserting three C-shaped holes and two pairs of rectangular notches below the antenna. The simulation results reveal that the proposed structure is in good accord with the simulation results. The proposed UWB antenna size is (100x90x1.6 mm)3. This proposed design could provide a solution to eliminating bands that interfere in a UWB band depending on the aperture design. The simulated findings reveal that the UWB antenna operates in the 8.5 GHz center frequency range and rejects all frequency bands utilizing slits. This antenna design can provide a solution to remove UWB bands from 3.1-10.6 except for 8.5 GHz which only works. By using the notch, we got a large increase in the gain. makes to be a suitable candidate for X-band-UWB applications
- …