1,237 research outputs found
A VLSI architecture of JPEG2000 encoder
Copyright @ 2004 IEEEThis paper proposes a VLSI architecture of JPEG2000 encoder, which functionally consists of two parts: discrete wavelet transform (DWT) and embedded block coding with optimized truncation (EBCOT). For DWT, a spatial combinative lifting algorithm (SCLA)-based scheme with both 5/3 reversible and 9/7 irreversible filters is adopted to reduce 50% and 42% multiplication computations, respectively, compared with the conventional lifting-based implementation (LBI). For EBCOT, a dynamic memory control (DMC) strategy of Tier-1 encoding is adopted to reduce 60% scale of the on-chip wavelet coefficient storage and a subband parallel-processing method is employed to speed up the EBCOT context formation (CF) process; an architecture of Tier-2 encoding is presented to reduce the scale of on-chip bitstream buffering from full-tile size down to three-code-block size and considerably eliminate the iterations of the rate-distortion (RD) truncation.This work was supported in part by the China National High Technologies Research Program (863) under Grant 2002AA1Z142
Design of multimedia processor based on metric computation
Media-processing applications, such as signal processing, 2D and 3D graphics
rendering, and image compression, are the dominant workloads in many embedded
systems today. The real-time constraints of those media applications have
taxing demands on today's processor performances with low cost, low power and
reduced design delay. To satisfy those challenges, a fast and efficient
strategy consists in upgrading a low cost general purpose processor core. This
approach is based on the personalization of a general RISC processor core
according the target multimedia application requirements. Thus, if the extra
cost is justified, the general purpose processor GPP core can be enforced with
instruction level coprocessors, coarse grain dedicated hardware, ad hoc
memories or new GPP cores. In this way the final design solution is tailored to
the application requirements. The proposed approach is based on three main
steps: the first one is the analysis of the targeted application using
efficient metrics. The second step is the selection of the appropriate
architecture template according to the first step results and recommendations.
The third step is the architecture generation. This approach is experimented
using various image and video algorithms showing its feasibility
A C++-embedded Domain-Specific Language for programming the MORA soft processor array
MORA is a novel platform for high-level FPGA programming of streaming vector and matrix operations, aimed at multimedia applications. It consists of soft array of pipelined low-complexity SIMD processors-in-memory (PIM). We present a Domain-Specific Language (DSL) for high-level programming of the MORA soft processor array. The DSL is embedded in C++, providing designers with a familiar language framework and the ability to compile designs using a standard compiler for functional testing before generating the FPGA bitstream using the MORA toolchain. The paper discusses the MORA-C++ DSL and the compilation route into the assembly for the MORA machine and provides examples to illustrate the programming model and performance
Real-time portable system for fabric defect detection using an ARM processor
Modern textile industry seeks to produce textiles as little defective as possible since the presence of defects can decrease the final price of products from 45% to 65%. Automated visual inspection (AVI) systems, based on image analysis, have become an important alternative for replacing traditional inspections methods that involve human tasks. An AVI system gives the advantage of repeatability when implemented within defined constrains, offering more objective and reliable results for particular tasks than human inspection. Costs of automated inspection systems development can be reduced using modular solutions with embedded systems, in which an important advantage is the low energy consumption. Among the possibilities for developing embedded systems, the ARM processor has been explored for acquisition, monitoring and simple signal processing tasks. In a recent approach we have explored the use of the ARM processor for defects detection by implementing the wavelet transform. However, the computation speed of the preprocessing was not yet sufficient for real time applications. In this approach we significantly improve the preprocessing speed of the algorithm, by optimizing matrix operations, such that it is adequate for a real time application. The system was tested for defect detection using different defect types. The paper is focused in giving a detailed description of the basis of the algorithm implementation, such that other algorithms may use of the ARM operations for fast implementations
Accelerating FPGA-based evolution of wavelet transform filters by optimized task scheduling
Adaptive embedded systems are required in various applications. This work addresses these needs in the
area of adaptive image compression in FPGA devices. A simplified version of an evolution strategy is utilized
to optimize wavelet filters of a Discrete Wavelet Transform algorithm. We propose an adaptive image compression system in FPGA where optimized memory architecture, parallel processing and optimized task scheduling allow reducing the time of evolution. The proposed solution has been extensively evaluated in terms of the quality of compression as well as the processing time. The proposed architecture
reduces the time of evolution by 44% compared to our previous reports while maintaining the quality of compression unchanged with respect to existing implementations. The system is able to find an
optimized set of wavelet filters in less than 2 min whenever the input type of data changes
MORA - an architecture and programming model for a resource efficient coarse grained reconfigurable processor
This paper presents an architecture and implementation details for MORA, a novel coarse grained reconfigurable processor for accelerating media processing applications. The MORA architecture involves a 2-D array of several such processors, to deliver low cost, high throughput performance in media processing applications. A distinguishing feature of the MORA architecture is the co-design of hardware architecture and low-level programming language throughout the design cycle. The implementation details for the single MORA processor, and benchmark evaluation using a cycle accurate simulator are presented
An IoT Endpoint System-on-Chip for Secure and Energy-Efficient Near-Sensor Analytics
Near-sensor data analytics is a promising direction for IoT endpoints, as it
minimizes energy spent on communication and reduces network load - but it also
poses security concerns, as valuable data is stored or sent over the network at
various stages of the analytics pipeline. Using encryption to protect sensitive
data at the boundary of the on-chip analytics engine is a way to address data
security issues. To cope with the combined workload of analytics and encryption
in a tight power envelope, we propose Fulmine, a System-on-Chip based on a
tightly-coupled multi-core cluster augmented with specialized blocks for
compute-intensive data processing and encryption functions, supporting software
programmability for regular computing tasks. The Fulmine SoC, fabricated in
65nm technology, consumes less than 20mW on average at 0.8V achieving an
efficiency of up to 70pJ/B in encryption, 50pJ/px in convolution, or up to
25MIPS/mW in software. As a strong argument for real-life flexible application
of our platform, we show experimental results for three secure analytics use
cases: secure autonomous aerial surveillance with a state-of-the-art deep CNN
consuming 3.16pJ per equivalent RISC op; local CNN-based face detection with
secured remote recognition in 5.74pJ/op; and seizure detection with encrypted
data collection from EEG within 12.7pJ/op.Comment: 15 pages, 12 figures, accepted for publication to the IEEE
Transactions on Circuits and Systems - I: Regular Paper
A low cost reconfigurable soft processor for multimedia applications: design synthesis and programming model
This paper presents an FPGA implementation of a low cost 8 bit reconfigurable processor core for media processing applications. The core is optimized to provide all basic arithmetic and logic functions required by the media processing and other domains, as well as to make it easily integrable into a 2D array. This paper presents an investigation of the feasibility of the core as a potential soft processing architecture for FPGA platforms. The core was synthesized on the entire Virtex FPGA family to evaluate its overall performance, scalability and portability. A special feature of the proposed architecture is its simple programming model which allows low level programming. Throughput results for popular benchmarks coded using the programming model and cycle accurate simulator are presented
- âŠ