ECG Signal Reconstruction on the IoT-Gateway and Efficacy of Compressive Sensing Under Real-time Constraints

Remote health monitoring is becoming indispensable, though, Internet of Things (IoTs)-based solutions have many implementation challenges, including energy consumption at the sensing node, and delay and instability due to cloud computing. Compressive sensing (CS) has been explored as a method to extend the battery lifetime of medical wearable devices. However, it is usually associated with computational complexity at the decoding end, increasing the latency of the system. Meanwhile, mobile processors are becoming computationally stronger and more efficient. Heterogeneous multicore platforms (HMPs) offer a local processing solution that can alleviate the limitations of remote signal processing. This paper demonstrates the real-time performance of compressed ECG reconstruction on ARM's big.LITTLE HMP and the advantages they provide as the primary processing unit of the IoT architecture. It also investigates the efficacy of CS in minimizing power consumption of a wearable device under real-time and hardware constraints. Results show that both the orthogonal matching pursuit and subspace pursuit reconstruction algorithms can be executed on the platform in real time and yield optimum performance on a single A15 core at minimum frequency. The CS extends the battery life of wearable medical devices up to 15.4% considering ECGs suitable for wellness applications and up to 6.6% for clinical grade ECGs. Energy consumption at the gateway is largely due to an active internet connection; hence, processing the signals locally both mitigates system's latency and improves gateway's battery life. Many remote health solutions can benefit from an architecture centered around the use of HMPs, a step toward better remote health monitoring systems.Peer reviewedFinal Published versio

A Multi-Site NFV Testbed for Experimentation With SUAV-Based 5G Vertical Services

[EN] With the advent of 5G technologies, vertical markets have been placed at the forefront, as fundamental drivers and adopters of technical developments and new business models. Small Unmanned Aerial Vehicles (SUAVs) are gaining traction in multiple vertical sectors, as key assets to generate, process, and distribute relevant information for the provision of value-added services. However, the enormous potential of SUAVs to support a exible, rapid, and cost-effective deployment of vertical applications is still to be exploited. In this paper, we leverage our prior work on Network Functions Virtualization (NFV) and SUAVs to design and build a multi-site experimentation testbed based on open-source technologies. The goal of this testbed is to explore synergies among NFV, SUAVs, and vertical services, following a practical approach primarily governed by experimentation. To verify our testbed design, we realized a reference use case where a number of SUAVs, cloud infrastructures, and communication protocols are used to provide a multi-site vertical service. Our experimentation results suggest the potential of NFV and SUAVs to exibly support vertical services. The lessons learned have served to identify missing elements in our NFV platform, as well as challenging aspects for potential improvement. These include the development of speci c mechanisms to limit processing load and delays of service deployment operations.This work was supported in part by the European Commission under the European Union's Horizon 2020 program (5GRANGE Project, grant agreement number 777137), and in part by the 5GCity Project funded by the Spanish Ministry of Economy and Competitiveness under Grant TEC2016-76795-C6-1R, Grant TEC2016-76795-C6-3R, and Grant TEC2016-76795-C6-5R

IPv6 Network Mobility

Network Authentication, Authorization, and Accounting has been used since before the days of the Internet as we know it today. Authentication asks the question, “Who or what are you?” Authorization asks, “What are you allowed to do?” And fi nally, accounting wants to know, “What did you do?” These fundamental security building blocks are being used in expanded ways today. The fi rst part of this two-part series focused on the overall concepts of AAA, the elements involved in AAA communications, and highlevel approaches to achieving specifi c AAA goals. It was published in IPJ Volume 10, No. 1[0]. This second part of the series discusses the protocols involved, specifi c applications of AAA, and considerations for the future of AAA

CoAP congestion control for the Internet of Things

“© © 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.” August Betzler, Javier Isern, Carles Gomez, Ilker Demirkol, Josep Paradells, "Experimental evaluation of congestion control for CoAP communications without end-to-end reliability", Ad Hoc Networks, pp. , 2016, ISSN 15708705. DOI: 10.1109/MCOM.2016.7509394CoAP is a lightweight RESTful application layer protocol devised for the IoT. Operating on top of UDP, CoAP must handle congestion control by itself. The core CoAP specification defines a basic congestion control mechanism, but it is not capable of adapting to network conditions. However, IoT scenarios exhibit significant resource constraints, which pose new challenges on the design of congestion control mechanisms. In this article we present CoCoA, an advanced congestion control mechanism for CoAP being standardized by the Internet Engineering Task Force CoRE working group. CoCoA introduces a novel round-trip time estimation technique, together with a variable backoff factor and aging mechanisms in order to provide dynamic and controlled retransmission timeout adaptation suitable for the peculiarities of IoT communications. We conduct a comparative performance analysis of CoCoA and a variety of alternative algorithms including state-of-the-art mechanisms developed for TCP. The study is based on experiments carried out in real testbeds. Results show that, in contrast to the alternative methods considered, CoCoA consistently outperforms the default CoAP congestion control mechanism in all evaluated scenarios.Peer ReviewedPostprint (author's final draft

Comunicações veiculares híbridas

Vehicle Communications is a promising research field, with a great potential for the development of new applications capable of improving road safety, traffic efficiency, as well as passenger comfort and infotainment. Vehicle communication technologies can be short-range, such as ETSI ITS-G5 or the 5G PC5 sidelink channel, or long-range, using the cellular network (LTE or 5G). However, none of the technologies alone can support the expected variety of applications for a large number of vehicles, nor all the temporal and spatial requirements of connected and autonomous vehicles. Thus, it is proposed the collaborative or hybrid use of short-range communications, with lower latency, and of long-range technologies, potentially with higher latency, but integrating aggregated data of wider geographic scope. In this context, this work presents a hybrid vehicle communications model, capable of providing connectivity through two Radio Access Technologies (RAT), namely, ETSI ITS-G5 and LTE, to increase the probability of message delivery and, consequently, achieving a more robust, efficient and secure vehicle communication system. The implementation of short-range communication channels is done using Raw Packet Sockets, while the cellular connection is established using the Advanced Messaging Queuing Protocol (AMQP) protocol. The main contribution of this dissertation focuses on the design, implementation and evaluation of a Hybrid Routing Sublayer, capable of isolating messages that are formed/decoded from transmission/reception processes. This layer is, therefore, capable of managing traffic coming/destined to the application layer of intelligent transport systems (ITS), adapting and passing ITS messages between the highest layers of the protocol stack and the available radio access technologies. The Hybrid Routing Sublayer also reduces the financial costs due to the use of cellular communications and increases the efficiency of the use of the available electromagnetic spectrum, by introducing a cellular link controller using a Beacon Detector, which takes informed decisions related to the need to connect to a cellular network, according to different scenarios. The experimental results prove that hybrid vehicular communications meet the requirements of cooperative intelligent transport systems, by taking advantage of the benefits of both communication technologies. When evaluated independently, the ITS-G5 technology has obvious advantages in terms of latency over the LTE technology, while the LTE technology performs better than ITS-G5, in terms of throughput and reliability.As Comunicações Veiculares são um campo de pesquisa promissor, com um grande potencial de desenvolvimento de novas aplicações capazes de melhorar a segurança nas estradas, a eficiência do tráfego, bem com o conforto e entretenimento dos passageiros. As tecnologias de comunicação veícular podem ser de curto alcance, como por exemplo ETSI ITS-G5 ou o canal PC5 do 5G, ou de longo alcance, recorrendo à rede celular (LTE ou 5G). No entanto, nenhuma das tecnologias por si só, consegue suportar a variedade expectável de aplicações para um número de veículos elevado nem tampouco todos os requisitos temporais e espaciais dos veículos conectados e autónomos. Assim, é proposto o uso colaborativo ou híbrido de comunicações de curto alcance, com latências menores, e de tecnologias de longo alcance, potencialmente com maiores latências, mas integrando dados agregados de maior abrangência geográfica. Neste contexto, este trabalho apresenta um modelo de comunicações veiculares híbrido, capaz de fornecer conectividade por meio de duas Tecnologias de Acesso por Rádio (RAT), a saber, ETSI ITS-G5 e LTE, para aumentar a probabilidade de entrega de mensagens e, consequentemente, alcançar um sistema de comunicação veicular mais robusto, eficiente e seguro. A implementação de canais de comunicação de curto alcance é feita usando Raw Packet Sockets, enquanto que a ligação celular é estabelecida usando o protocolo Advanced Messaging Queuing Protocol (AMQP). A contribuição principal desta dissertação foca-se no projeto, implementação e avaliação de uma sub camada hibrída de encaminhamento, capaz de isolar mensagens que se formam/descodificam a partir de processos de transmissão/receção. Esta camadada é, portanto, capaz de gerir o tráfego proveniente/destinado à camada de aplicação de sistemas inteligentes de transportes (ITS) adaptando e passando mensagens ITS entre as camadas mais altas da pilha protocolar e as tecnologias de acesso rádio disponíveis. A sub camada hibrída de encaminhamento também potencia uma redução dos custos financeiros devidos ao uso de comunicações celulares e aumenta a eficiência do uso do espectro electromagnético disponível, ao introduzir um múdulo controlador da ligação celular, utilizando um Beacon Detector, que toma decisões informadas relacionadas com a necessidade de uma conexão a uma rede celular, de acordo com diferentes cenários. Os resultados experimentais comprovam que as comunicações veículares híbridas cumprem os requisitos dos sistemas cooperativos de transporte inteligentes, ao tirarem partido das vantagens de ambas tecnologias de comunicação. Quando avaliadas de forma independente, constata-se que que a tecnologia ITS-G5 tem vantagens evidentes em termos de latência sobre a tecnologia LTE, enquanto que a tecnologia LTE tem melhor desempenho que a LTE, ai nível de débito e fiabilidade.Mestrado em Engenharia Eletrónica e Telecomunicaçõe

Is Europe in the Driver's Seat? The Competitiveness of the European Automotive Embedded Systems Industry

This report is one of a series resulting from a project entitled ¿Competitiveness by Leveraging Emerging Technologies Economically¿ (COMPLETE), carried out by JRC-IPTS. Each of the COMPLETE studies illustrates in its own right that European companies are active on many fronts of emerging and disruptive ICT technologies and are supplying the market with relevant products and services. Nevertheless, the studies also show that the creation and growth of high tech companies is still very complex and difficult in Europe, and too many economic opportunities seem to escape European initiatives and ownership. COMPLETE helps to illustrate some of the difficulties experienced in different segments of the ICT industry and by growing potential global players. This report reflects the findings of a study conducted by Egil Juliussen and Richard Robinson, two senior experts from iSuppli Corporation on the Competitiveness of the European Automotive Embedded Software industry. The report starts by introducing the market, its trends, the technologies, their characteristics and their potential economic impact, before moving to an analysis of the competitiveness of the corresponding European industry. It concludes by suggesting policy options. The research, initially based on internal expertise and literature reviews, was complemented with further desk research, expert interviews, expert workshops and company visits. The results were ultimately reviewed by experts and also in a dedicated workshop. The report concludes that currently ICT innovation in the automotive industry is a key competence in Europe, with very little ICT innovation from outside the EU finding its way into EU automotive companies. A major benefit of a strong automotive ICT industry is the resulting large and valuable employment base. But future maintenance of automotive ICT jobs within the EU will only be possible if the EU continues to have high levels of product innovation.JRC.DDG.J.4-Information Societ

DESIGNING AN INTELLIGENT HOME MEDIA CENTER

This paper presents design and implementation of a personal intelligent home media center. The primary goal was to increase the quality of life with the use of ambient intelligence in smart homes. The solution presented here uses client-server architecture with network-attached storage for storing all multimedia contents. Sensors are used to identify person’s presence and ambient intelligence techniques to recommend the most suitable multimedia content to end-users. The major advantages of this personal intelligent home media center are speed, intelligence, inexpensive components and scalability. The implementation was done in within one home media center, for the evaluation purposes

Sensor Proxy Mobile IPv6 (SPMIPv6)—A Novel Scheme for Mobility Supported IP-WSNs

IP based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health-care, home automation, environmental monitoring, industrial control, vehicle telematics and agricultural monitoring. In all these applications, mobility in the sensor network with special attention to energy efficiency is a major issue to be addressed. Host-based mobility management protocols are not suitable for IP-WSNs because of their energy inefficiency, so network based mobility management protocols can be an alternative for the mobility supported IP-WSNs. In this paper we propose a network based mobility supported IP-WSN protocol called Sensor Proxy Mobile IPv6 (SPMIPv6). We present its architecture, message formats and also evaluate its performance considering signaling cost, mobility cost and energy consumption. Our analysis shows that with respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 60% and 56%, as well as the mobility cost by 62% and 57%, compared to MIPv6 and PMIPv6, respectively. The simulation results also show that in terms of the number of hops, SPMIPv6 decreases the signaling cost by 56% and 53% as well as mobility cost by 60% and 67% as compared to MIPv6 and PMIPv6 respectively. It also indicates that proposed scheme reduces the level of energy consumption significantly