Modeling of Substrate Noise Effects in Dynamic CMOS Circuits

The decrease in the feature size has led to the integration of both digital and analog circuits on the same silicon die which has led to many crosstalk issues. The crosstalk due to the substrate interactions also plagiarizes complete digital systems. This paper lays emphasis on this fact and because of the vulnerability of dynamic CMOS circuits to noise; a brief study of the effects of substrate variations on the performance of the dynamic CMOS circuits is carried out in this paper. The effects of substrate noise at very high frequencies (above 10 GHz) are also depicted in this paper. In order to accurately estimate the effects of substrate noise a substrate model is proposed and verified for functionality in the last section of this paper

Analysis and application of improved feedthrough logic

Continuous technology scaling and increased frequency of operation of VLSI circuits leads to increase in power density which raises thermal management problem. Therefore design of low power VLSI circuit technique is a challenging task without sacrificing its performance. This thesis presents the design of a low power dynamic circuit using a new CMOS domino logic family called feedthrough (FTL) logic. Dynamic logic circuits are more significant because of its faster speed and lesser transistor requirement as compared to static CMOS logic circuits. The need for faster circuits compels designers to use FTL as compared static and domino CMOS logic and the requirement of output inverter for cascading of various logic blocks in domino logic are eliminated in the proposed design. The proposed circuit for low power (LP-FTL) improves dynamic power consumption as compared to the existing FTL and to further improve its speed we propose another circuit (HS-FTL). This logic family improves speed at the cost of dynamic power consumption and area. Proposed modified FTL circuit families provide better PDP as compared to the existing FTL. Simulation results of both the proposed circuit using 0.18 µm, 1.8 V CMOS process technology indicate that the LP-FTL structure reduces the dynamic power approximately by 42% and the HS-FTL structure achieves a speed up- 1.4 for 10-stage of inverters and 8-bit ripple carry adder in comparison to existing FTL logic. Furthermore, we present various circuit design techniques to improve noise tolerance of the proposed FTL logic families. Noise in deep submicron technology limits the reliability and performance of ICs. The ANTE (average noise threshold energy) metric is used for the analysis of noise tolerance of proposed FTL. A 2-input NAND and NOR gate is designed by the proposed technique. Simulation results for a 2-input NAND gate at 0.18-µm, 1.8 V CMOS process technology show that the proposed noise tolerant circuit achieves 1.79X ANTE improvement along with the reduction in leakage power. Continuous scaling of technology towards the nanometer range significantly increases leakage current level and the effect of noise. This research can be further extended for performance optimization in terms of power, speed, area and noise immunity

A New Ultra Low-Power and Noise Tolerant Circuit Technique for CMOS Domino Logic

Dynamic logic style is used in high performance circuit design because of its fast speed and less transistors requirement as compared to CMOS logic style. But it is not widely accepted for all types of circuit implementations due to its less noise tolerance and charge sharing problems. A small noise at the input of the dynamic logic can change the desired output. Domino logic uses one static CMOS inverter at the output of dynamic node which is more noise immune and consuming very less power as compared to other proposed circuit. In this paper we have proposed a novel circuit for domino logic which has less noise at the output node and has very less power-delay product (PDP) as compared to previous reported articles. Low PDP is achieved by using semi-dynamic logic buffer and also reducing leakage current when PDN is not conducting

Improved Techniques for High Performance Noise-Tolerant Domino CMOS Logic Circuits

Domino CMOS logic circuit family finds a wide variety of applications in microprocessors, digital signal processors, and dynamic memory due to their high speed and low device count. However, there are inevitable problems that degrade the noise immunity of this family; they are the inevitable leakage current and the charge sharing. Added to the drawbacks is the relatively large power consumption, especially if compared to the static complementary CMOS logic family. To make the matter worse, these drawbacks are more tactile with the scaling of CMOS technology. In my thesis, An introduction to domino logic, The impact of CMOS technology scaling on the performance of domino CMOS logic, Three Phase Domino Logic Circuit, High-performance noise-tolerant circuit techniques for CMOS dynamic logic and other Domino logic techniques are studied and corresponding Domino logic techniques have been designed and simulated. Specifically, the need to decrease the dynamic power consumption forces the designer to use a lower power-supply voltage. This in turn necessitates the reduction of threshold voltage to maintain the performance with the associated increase in sub threshold leakage current. So, a properly sized PMOS keeper must be used to compensate for this leakage. It will be found that the speed, which is the major advantage of domino logic compared to other logic styles, will degrade with CMOS technology scaling due to the contention current of the keeper. To assure high performance in noise tolerant techniques, the inevitable effects like leakage currents and charge distribution have to be minimized. In this thesis few modifications have also been made to already existing domino techniques and different Domino logic circuits are simulated in both Cadence virtuoso (implemented using GPDK090- library of 90nm technology) and Mentor graphics (implemented at different technologies like Tsmc 035.mod, Tsmc 025.mod, Tsmc 018.mod) environments. The performance parameters are also compared with other standard architectures of Domino logic

Subthreshold Dual Mode Logic

In this brief, we introduce a novel low-power dual mode logic (DML) family, designed to operate in the subthreshold region. The proposed logic family can be switched between static and dynamic modes of operation according to system requirements. In static mode, the DML gates feature very low-power dissipation with moderate performance, while in dynamic mode they achieve higher performance, albeit with increased power dissipation. This is achieved with a simple and intuitive design concept. SPICE and Monte Carlo simulations compare performance, power dissipation, and robustness of the proposed DML gates to their CMOS and domino counterparts in the 80-nm process. Measurements of an 80-nm test chip are presented in order to prove the proposed concept

Dynamic gates with hysteresis and configurable noise tolerance

Journal ArticleDynamic logic can provide significant performance and power benefit compared to implementations using static gates. Unfortunately dynamic gates have traditionally suffered from low noise margins, which limits their reliability. A new logic family, called complementary dynamic logic (CDL), is presented. CDL replaces the standard keeper logic with a dual dynamic keeper gate that is applicable to all dynamic gate structures. CDL provides dynamic gates with two novel characteristics: hysteresis and arbitrarily configurable noise margins. However, these two benefits come at the cost of reducing the gain and increasing the energy of the dynamic gate. This paper compares the noise, energy, performance, gain, and total transistor width tradeoffs of CDL and three other logic families applied to a 65nm cell library consisting of 23 functions. The results show that the performance advantages of dynamic domino gates can be maintained while providing significantly enhanced noise margins using CDL structures

DESIGN OF AN ENERGY-EFFICIENT CONSTANT DELAY LOGIC FOR LOW POWER APPLICATIONS

An Energy Efficient Constant Delay Logic (EE-CDL) is proposed in this thesis to reduce the power consumption for low power applications. The EE-CDL is well suited to arithmetic circuits where the critical path is made of a large cascade of inverting gates. It has a unique characteristic where the output is pre-evaluated before the inputs from the preceding stage are ready. The proposed logic style requires low power when compared to the existing CDL. The proposed circuit is designed and using 90-nm, CMOS technology file with supply voltage 1.2V. An inverter is designed using energy efficient feedthrough logic and simulated in MicroWind. The simulation result shows that the proposed logic reduces the power consumption by 88%, 83% and 56% when compared with FTL, Low Power FTL (LP-FTL) and Constant Delay Logic (CDL) respectively. The problem of requirement of inverter as in dynamic logic is completely eliminated in the proposed logic

Design and Implementation of Novel High Performance Domino Logic

This dissertation presents design and implementation of novel high performance domino logic techniques with increased noise robustness and reduced leakages. The speed and overhead area became the primary parameters of choice for fabrication industry that led to invention of clocked logic styles named as Dynamic logic and Domino logic families. Most importantly, power consumption, noise immunity, speed of operation, area and cost are the predominant parameters for designing any kind of digital logic circuit technique with effective trade-off amongst these parameters depending on the situation and application of design. Because of its high speed and low overhead area domino logic became process of choice for designing of high speed application circuits. The concerning issues are large power consumption and high sensitivity towards noise. Hence, there is a need for designing new domino methodology to meet the requirements by overcoming above mentioned drawbacks which led to ample opportunities for diversified research in this field. Therefore, the outcome of research must be able to handle the primary design parameters efficiently. Besides this, the designed circuit must exhibit high degree of robustness towards noise.In this thesis, few domino logic circuit techniques are proposed to deal with noise and sub-threshold leakages. Effect of signal integrity issues on domino logic techniques is studied. Furthermore, having been subjected to process corner analysis and noise analysis, the overall performance of proposed domino techniques is found to be enhanced despite a few limitations that are mentioned in this work. Besides this, lector based domino and dynamic node stabilized techniques are also proposed and are investigated thoroughly. Simulations show that proposed circuits are showing superior performance. In addition to this, domino based Schmitt triggers with various hysteresis phenomena are designed and simulated. Pre-layout and post-layout simulation results are compared for proposed Schmitt trigger. Simulations reveal that proposed Schmitt trigger techniques are more noise tolerant than CMOS counterparts. Moreover, a test chip for domino based Schmitt trigger is done in UMC 180 nm technology for fabrication

Study of Layout Techniques in Dynamic Logic Circuitry for Single Event Effect Mitigation

Dynamic logic circuits are highly suitable for high-speed applications, considering the fact that they have a smaller area and faster transition. However, their application in space or other radiation-rich environments has been significantly inhibited by their susceptibility to radiation effects. This work begins with the basic operations of dynamic logic circuits, elaborates upon the physics underlying their radiation vulnerability, and evaluates three techniques that harden dynamic logic from the layout: drain extension, pulse quenching, and a proposed method. The drain extension method adds an extra drain to the sensitive node in order to improve charge sharing, the pulse quenching scheme utilizes charge sharing by duplicating a component that offsets the transient pulse, and the proposed technique takes advantage of both. Domino buffers designed using these three techniques, along with a conventional design as reference, were modeled and simulated using a 3D TCAD tool. Simulation results confirm a significant reduction of soft error rate in the proposed technique and suggest a greater reduction with angled incidence. A 130 nm chip containing designed buffer and register chains was fabricated and tested with heavy ion irradiation. According to the experiment results, the proposed design achieved 30% soft error rate reduction, with 19%, 20%, and 10% overhead in speed, power, and area, respectively

Analysis of Dynamic Logic Circuits in Deep Submicron CMOS Technologies

Dynamic logic circuits are utilized to minimize the delay in the critical path of high-performance designs such as the datapath circuits in state-of-the-art microprocessors. However, as integrated circuits (ICs) scale to the very deep submicron (VDSM) regime, dynamic logic becomes susceptible to a variety of failure modes due to decreasing noise margins and increasing leakage currents. The objective of this thesis is to characterize the performance of dynamic logic circuits in VDSM technologies and to evaluate various design strategies to mitigate the effects of leakage currents and small noise margins