Uncalibrated stereo vision applied to breast cancer treatment aesthetic assessment

Mestrado Integrado. Engenharia Informática e Computação. Universidade do Porto. Faculdade de Engenharia. 201

Distributed scene reconstruction from multiple mobile platforms

Recent research on mobile robotics has produced new designs that provide house-hold robots with omnidirectional motion. The image sensor embedded in these devices motivates the application of 3D vision techniques on them for navigation and mapping purposes. In addition to this, distributed cheapsensing systems acting as unitary entity have recently been discovered as an efficient alternative to expensive mobile equipment. In this work we present an implementation of a visual reconstruction method, structure from motion (SfM), on a low-budget, omnidirectional mobile platform, and extend this method to distributed 3D scene reconstruction with several instances of such a platform. Our approach overcomes the challenges yielded by the plaform. The unprecedented levels of noise produced by the image compression typical of the platform is processed by our feature filtering methods, which ensure suitable feature matching populations for epipolar geometry estimation by means of a strict quality-based feature selection. The robust pose estimation algorithms implemented, along with a novel feature tracking system, enable our incremental SfM approach to novelly deal with ill-conditioned inter-image configurations provoked by the omnidirectional motion. The feature tracking system developed efficiently manages the feature scarcity produced by noise and outputs quality feature tracks, which allow robust 3D mapping of a given scene even if - due to noise - their length is shorter than what it is usually assumed for performing stable 3D reconstructions. The distributed reconstruction from multiple instances of SfM is attained by applying loop-closing techniques. Our multiple reconstruction system merges individual 3D structures and resolves the global scale problem with minimal overlaps, whereas in the literature 3D mapping is obtained by overlapping stretches of sequences. The performance of this system is demonstrated in the 2-session case. The management of noise, the stability against ill-configurations and the robustness of our SfM system is validated on a number of experiments and compared with state-of-the-art approaches. Possible future research areas are also discussed

Material Recognition Meets 3D Reconstruction : Novel Tools for Efficient, Automatic Acquisition Systems

For decades, the accurate acquisition of geometry and reflectance properties has represented one of the major objectives in computer vision and computer graphics with many applications in industry, entertainment and cultural heritage. Reproducing even the finest details of surface geometry and surface reflectance has become a ubiquitous prerequisite in visual prototyping, advertisement or digital preservation of objects. However, today's acquisition methods are typically designed for only a rather small range of material types. Furthermore, there is still a lack of accurate reconstruction methods for objects with a more complex surface reflectance behavior beyond diffuse reflectance. In addition to accurate acquisition techniques, the demand for creating large quantities of digital contents also pushes the focus towards fully automatic and highly efficient solutions that allow for masses of objects to be acquired as fast as possible. This thesis is dedicated to the investigation of basic components that allow an efficient, automatic acquisition process. We argue that such an efficient, automatic acquisition can be realized when material recognition "meets" 3D reconstruction and we will demonstrate that reliably recognizing the materials of the considered object allows a more efficient geometry acquisition. Therefore, the main objectives of this thesis are given by the development of novel, robust geometry acquisition techniques for surface materials beyond diffuse surface reflectance, and the development of novel, robust techniques for material recognition. In the context of 3D geometry acquisition, we introduce an improvement of structured light systems, which are capable of robustly acquiring objects ranging from diffuse surface reflectance to even specular surface reflectance with a sufficient diffuse component. We demonstrate that the resolution of the reconstruction can be increased significantly for multi-camera, multi-projector structured light systems by using overlappings of patterns that have been projected under different projector poses. As the reconstructions obtained by applying such triangulation-based techniques still contain high-frequency noise due to inaccurately localized correspondences established for images acquired under different viewpoints, we furthermore introduce a novel geometry acquisition technique that complements the structured light system with additional photometric normals and results in significantly more accurate reconstructions. In addition, we also present a novel method to acquire the 3D shape of mirroring objects with complex surface geometry. The aforementioned investigations on 3D reconstruction are accompanied by the development of novel tools for reliable material recognition which can be used in an initial step to recognize the present surface materials and, hence, to efficiently select the subsequently applied appropriate acquisition techniques based on these classified materials. In the scope of this thesis, we therefore focus on material recognition for scenarios with controlled illumination as given in lab environments as well as scenarios with natural illumination that are given in photographs of typical daily life scenes. Finally, based on the techniques developed in this thesis, we provide novel concepts towards efficient, automatic acquisition systems

Colour local feature fusion for image matching and recognition

This thesis investigates the use of colour information for local image feature extraction. The work is motivated by the inherent limitation of the most widely used state of the art local feature techniques, caused by their disregard of colour information. Colour contains important information that improves the description of the world around us, and by disregarding it; chromatic edges may be lost and thus decrease the level of saliency and distinctiveness of the resulting grayscale image. This thesis addresses the question of whether colour can improve the distinctive and descriptive capabilities of local features, and if this leads to better performances in image feature matching and object recognition applications. To ensure that the developed local colour features are robust to general imaging conditions and capable for real-world applications, this work utilises the most prominent photometric colour invariant gradients from the literature. The research addresses several limitations of previous studies that used colour invariants, by implementing robust local colour features in the form of a Harris-Laplace interest region detection and a SIFT description which characterises the detected image region. Additionally, a comprehensive and rigorous evaluation is performed, that compares the largest number of colour invariants of any previous study. This research provides for the first time, conclusive findings on the capability of the chosen colour invariants for practical real-world computer vision tasks. The last major aspect of the research involves the proposal of a feature fusion extraction strategy, that uses grayscale intensity and colour information conjointly. Two separate fusion approaches are implemented and evaluated, one for local feature matching tasks and another approach for object recognition. Results from the fusion analysis strongly indicate, that the colour invariants contain unique and useful information that can enhance the performance of techniques that use grayscale only based features

Camera positioning for 3D panoramic image rendering

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University London.Virtual camera realisation and the proposition of trapezoidal camera architecture are the two broad contributions of this thesis. Firstly, multiple camera and their arrangement constitute a critical component which affect the integrity of visual content acquisition for multi-view video. Currently, linear, convergence, and divergence arrays are the prominent camera topologies adopted. However, the large number of cameras required and their synchronisation are two of prominent challenges usually encountered. The use of virtual cameras can significantly reduce the number of physical cameras used with respect to any of the known camera structures, hence adequately reducing some of the other implementation issues. This thesis explores to use image-based rendering with and without geometry in the implementations leading to the realisation of virtual cameras. The virtual camera implementation was carried out from the perspective of depth map (geometry) and use of multiple image samples (no geometry). Prior to the virtual camera realisation, the generation of depth map was investigated using region match measures widely known for solving image point correspondence problem. The constructed depth maps have been compare with the ones generated using the dynamic programming approach. In both the geometry and no geometry approaches, the virtual cameras lead to the rendering of views from a textured depth map, construction of 3D panoramic image of a scene by stitching multiple image samples and performing superposition on them, and computation of virtual scene from a stereo pair of panoramic images. The quality of these rendered images were assessed through the use of either objective or subjective analysis in Imatest software. Further more, metric reconstruction of a scene was performed by re-projection of the pixel points from multiple image samples with a single centre of projection. This was done using sparse bundle adjustment algorithm. The statistical summary obtained after the application of this algorithm provides a gauge for the efficiency of the optimisation step. The optimised data was then visualised in Meshlab software environment, hence providing the reconstructed scene. Secondly, with any of the well-established camera arrangements, all cameras are usually constrained to the same horizontal plane. Therefore, occlusion becomes an extremely challenging problem, and a robust camera set-up is required in order to resolve strongly the hidden part of any scene objects. To adequately meet the visibility condition for scene objects and given that occlusion of the same scene objects can occur, a multi-plane camera structure is highly desirable. Therefore, this thesis also explore trapezoidal camera structure for image acquisition. The approach here is to assess the feasibility and potential of several physical cameras of the same model being sparsely arranged on the edge of an efficient trapezoid graph. This is implemented both Matlab and Maya. The quality of the depth maps rendered in Matlab are better in Quality

Robust vision based slope estimation and rocks detection for autonomous space landers

As future robotic surface exploration missions to other planets, moons and asteroids become more ambitious in their science goals, there is a rapidly growing need to significantly enhance the capabilities of entry, descent and landing technology such that landings can be carried out with pin-point accuracy at previously inaccessible sites of high scientific value. As a consequence of the extreme uncertainty in touch-down locations of current missions and the absence of any effective hazard detection and avoidance capabilities, mission designers must exercise extreme caution when selecting candidate landing sites. The entire landing uncertainty footprint must be placed completely within a region of relatively flat and hazard free terrain in order to minimise the risk of mission ending damage to the spacecraft at touchdown. Consequently, vast numbers of scientifically rich landing sites must be rejected in favour of safer alternatives that may not offer the same level of scientific opportunity. The majority of truly scientifically interesting locations on planetary surfaces are rarely found in such hazard free and easily accessible locations, and so goals have been set for a number of advanced capabilities of future entry, descent and landing technology. Key amongst these is the ability to reliably detect and safely avoid all mission critical surface hazards in the area surrounding a pre-selected landing location. This thesis investigates techniques for the use of a single camera system as the primary sensor in the preliminary development of a hazard detection system that is capable of supporting pin-point landing operations for next generation robotic planetary landing craft. The requirements for such a system have been stated as the ability to detect slopes greater than 5 degrees and surface objects greater than 30cm in diameter. The primary contribution in this thesis, aimed at achieving these goals, is the development of a feature-based,self-initialising, fully adaptive structure from motion (SFM) algorithm based on a robust square-root unscented Kalman filtering framework and the fusion of the resulting SFM scene structure estimates with a sophisticated shape from shading (SFS) algorithm that has the potential to produce very dense and highly accurate digital elevation models (DEMs) that possess sufficient resolution to achieve the sensing accuracy required by next generation landers. Such a system is capable of adapting to potential changes in the external noise environment that may result from intermittent and varying rocket motor thrust and/or sudden turbulence during descent, which may translate to variations in the vibrations experienced by the platform and introduce varying levels of motion blur that will affect the accuracy of image feature tracking algorithms. Accurate scene structure estimates have been obtained using this system from both real and synthetic descent imagery, allowing for the production of accurate DEMs. While some further work would be required in order to produce DEMs that possess the resolution and accuracy needed to determine slopes and the presence of small objects such as rocks at the levels of accuracy required, this thesis presents a very strong foundation upon which to build and goes a long way towards developing a highly robust and accurate solution

Foetal echocardiographic segmentation

Congenital heart disease affects just under one percentage of all live births [1]. Those defects that manifest themselves as changes to the cardiac chamber volumes are the motivation for the research presented in this thesis. Blood volume measurements in vivo require delineation of the cardiac chambers and manual tracing of foetal cardiac chambers is very time consuming and operator dependent. This thesis presents a multi region based level set snake deformable model applied in both 2D and 3D which can automatically adapt to some extent towards ultrasound noise such as attenuation, speckle and partial occlusion artefacts. The algorithm presented is named Mumford Shah Sarti Collision Detection (MSSCD). The level set methods presented in this thesis have an optional shape prior term for constraining the segmentation by a template registered to the image in the presence of shadowing and heavy noise. When applied to real data in the absence of the template the MSSCD algorithm is initialised from seed primitives placed at the centre of each cardiac chamber. The voxel statistics inside the chamber is determined before evolution. The MSSCD stops at open boundaries between two chambers as the two approaching level set fronts meet. This has significance when determining volumes for all cardiac compartments since cardiac indices assume that each chamber is treated in isolation. Comparison of the segmentation results from the implemented snakes including a previous level set method in the foetal cardiac literature show that in both 2D and 3D on both real and synthetic data, the MSSCD formulation is better suited to these types of data. All the algorithms tested in this thesis are within 2mm error to manually traced segmentation of the foetal cardiac datasets. This corresponds to less than 10% of the length of a foetal heart. In addition to comparison with manual tracings all the amorphous deformable model segmentations in this thesis are validated using a physical phantom. The volume estimation of the phantom by the MSSCD segmentation is to within 13% of the physically determined volume

Robust airborne 3D visual simultaneous localisation and mapping

The aim of this thesis is to present robust solutions to technical problems of airborne three-dimensional (3D) Visual Simultaneous Localisation And Mapping (VSLAM). These solutions are developed based on a stereovision system available onboard Unmanned Aerial Vehicles (UAVs). The proposed airborne VSLAM enables unmanned aerial vehicles to construct a reliable map of an unknown environment and localise themselves within this map without any user intervention. Current research challenges related to Airborne VSLAM include the visual processing through invariant feature detectors/descriptors, efficient mapping of large environments and cooperative navigation and mapping of complex environments. Most of these challenges require scalable representations, robust data association algorithms, consistent estimation techniques, and fusion of different sensor modalities. To deal with these challenges, seven Chapters are presented in this thesis as follows: Chapter 1 introduces UAVs, definitions, current challenges and different applications. Next, in Chapter 2 we present the main sensors used by UAVs during navigation. Chapter 3 presents an important task for autonomous navigation which is UAV localisation. In this chapter, some robust and optimal approaches for data fusion are proposed with performance analysis. After that, UAV map building is presented in Chapter 4. This latter is divided into three parts. In the first part, a new imaging alternative technique is proposed to extract and match a suitable number of invariant features. The second part presents an image mosaicing algorithm followed by a super-resolution approach. In the third part, we propose a new feature detector and descriptor that is fast, robust and detect suitable number of features to solve the VSLAM problem. A complete Airborne Visual Simultaneous Localisation and Mapping (VSLAM) solution based on a stereovision system is presented in Chapter (5). Robust data association filters with consistency and observability analysis are presented in this chapter as well. The proposed algorithm is validated with loop closing detection and map management using experimental data. The airborne VSLAM is extended then to the multiple UAVs case in Chapter (6). This chapter presents two architectures of cooperation: a Centralised and a Decentralised. The former provides optimal precision in terms of UAV positions and constructed map while the latter is more suitable for real time and embedded system applications. Finally, conclusions and future works are presented in Chapter (7).EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Robust Visual SLAM in Challenging Environments with Low-texture and Dynamic Illumination

- Robustness to Dynamic Illumination conditions is also one of the main open challenges in visual odometry and SLAM, e.g. high dynamic range (HDR) environments. The main difficulties in these situations come from both the limitations of the sensors, for instance automatic settings of a camera might not react fast enough to properly record dynamic illumination changes, and also from limitations in the algorithms, e.g. the track of interest points is typically based on brightness constancy. The work of this thesis contributes to mitigate these phenomena from two different perspectives. The first one addresses this problem from a deep learning perspective by enhancing images to invariant and richer representations for VO and SLAM, benefiting from the generalization properties of deep neural networks. In this work it is also demonstrated how the insertion of long short term memory (LSTM) allows us to obtain temporally consistent sequences, since the estimation depends on previous states. Secondly, a more traditional perspective is exploited to contribute with a purely geometric-based tracking of line segments in challenging stereo streams with complex or varying illumination, since they are intrinsically more informative. Fecha de lectura de Tesis Doctoral: 26 de febrero 2020In the last years, visual Simultaneous Localization and Mapping (SLAM) has played a role of capital importance in rapid technological advances, e.g. mo- bile robotics and applications such as virtual, augmented, or mixed reality (VR/AR/MR), as a vital part of their processing pipelines. As its name indicates, it comprises the estimation of the state of a robot (typically the pose) while, simultaneously, incrementally building and refining a consistent representation of the environment, i.e. the so-called map, based on the equipped sensors. Despite the maturity reached by state-of-art visual SLAM techniques in controlled environments, there are still many open challenges to address be- fore reaching a SLAM system robust to long-term operations in uncontrolled scenarios, where classical assumptions, such as static environments, do not hold anymore. This thesis contributes to improve robustness of visual SLAM in harsh or difficult environments, in particular: - Low-textured Environments, where traditional approaches suffer from an accuracy impoverishment and, occasionally, the absolute failure of the system. Fortunately, many of such low-textured environments contain planar elements that are rich in linear shapes, so an alternative feature choice such as line segments would exploit information from structured parts of the scene. This set of contributions exploits both type of features, i.e. points and line segments, to produce visual odometry and SLAM algorithms robust in a broader variety of environments, hence leveraging them at all instances of the related processes: monocular depth estimation, visual odometry, keyframe selection, bundle adjustment, loop closing, etc. Additionally, an open-source C++ implementation of the proposed algorithms has been released along with the published articles and some extra multimedia material for the benefit of the community

Spatio-Temporal Analysis of Flows Close to Free Water Surfaces

In order to examine the air-water gas exchange, a detailed knowledge is needed about the flow field within and beneath the water-side viscous boundary layer. Therefore a novel measurement technique is developed for the spatio-temporal analysis of flows close to free water surfaces. A fluid volume is illuminated by LEDs. Small spherical particles are added to the fluid, functioning as a tracer. A camera pointing to the water surface from above records the image sequences. The distance of the spheres to the surface is coded by means of a supplemented dye, which absorbs the light of the LEDs. By using LEDs flashing with two different wavelengths, it is possible to use particles variable in size. The velocity vectors are obtained by using an extension of the method of optical flow. The vertical velocity component is computed from the temporal change of brightness. Using 3D parametric motion models the shear stress at surfaces can be estimated directly, without previous calculation of the vector fields. Hardware and algorithmics are tested in several ways: A laminar falling film serves as reference flow. The predicted parabolic profile of this stationary flow can be reproduced very well. Buoyant convective turbulence acts as an example for an instationary inherently 3D flow. The direct estimation of the wall shear rate is applied to sequences recorded in the context of biofluidmechanics, revealing a substantial improvement compared to conventional techniques