Versatility Of Low-Power Wide-Area Network Applications

Low-Power Wide-Area Network (LPWAN) is regarded as the leading communication technology for wide-area Internet-of-Things (IoT) applications. It offers low-power, long-range, and low-cost communication. With different communication requirements for varying IoT applications, many competing LPWAN technologies operating in both licensed (e.g., NB-IoT, LTE-M, and 5G) and unlicensed (e.g., LoRa and SigFox) bands have emerged. LPWANs are designed to support applications with low-power and low data rate operations. They are not well-designed to host applications that involve high mobility, high traffic, or real-time communication (e.g., volcano monitoring and control applications).With the increasing number of mobile devices in many IoT domains (e.g., agricultural IoT and smart city), mobility support is not well-addressed in LPWAN. Cellular-based/licensed LPWAN relies on the wired infrastructure to enable mobility. On the other hand, most unlicensed LPWANs operate on the crowded ISM band or are required to duty cycle, making handling mobility a challenge. In this dissertation, we first identify the key opportunities of LPWAN, highlight the challenges, and show potential directions for future research. We then enable the versatility of LPWAN applications first by enabling applications involving mobility over LPWAN. Specifically, we propose to handle mobility in LPWAN over white space considering Sensor Network Over White Space (SNOW). SNOW is a highly scalable and energy-efficient LPWAN operating over the TV white spaces. TV white spaces are the allocated but locally unused available TV channels (54 - 698 MHz in the US). We proposed a dynamic Carrier Frequency Offset (CFO) estimation and compensation technique that considers the impact of the Doppler shift due to mobility. Also, we design energy-efficient and fast BS discovery and association approaches. Finally, we demonstrate the feasibility of our approach through experiments in different deployments. Finally, we present a collision detection and recovery technique called RnR (Reverse & Replace Decoding) that applies to LPWANs. Additionally, we discuss future work to enable handling burst transmission over LPWAN and localization in mobile LPWAN

Design of medium access control techniques for cooperative wireless networks

Ph.DDOCTOR OF PHILOSOPH

Un cadre inter-couches pour la protection contre les interférences dans les réseaux ad-hoc radio cognitive

A fixed spectrum assignment scheme has a problem with resource deficiency in a wireless network. In 2002, the US Federal Communication Commission (FCC) reported that the radio spectrum was 20% to 85% under-utilized. The insufficient use of the spectrum is a critical issue for radio communication; as communication grows, a fixed spectrum becomes more limiting. The FCC then changed its spectrum management policy to make it more flexible by investigating the cognitive radio (CR) approach. Cognitive radio is a type of intelligent radio that explores the radio frequency environment, learns, and decides to use the unused portion of the frequency. The main functions of a CR are sensing, decision making, and sharing. However, these radios have to respect the standard wireless infrastructures by ensuring the least impact with their devices, also known as primary radios. Coexistence between CR systems and primary systems requires dedicated observation processes and interference management. In this thesis, observation from a CR point of view is presented. The overlapping area between a CR transmitter and primary radio (PR) transmitter is analysed so that it can be taken into account. The impact of this area is learnt by simulation and presented in Chapter 4. As a consequence, potential interference is envisaged. Along with observation, we investigate a proper mechanism to better prevent perturbation on PR devices using the Grey model and Kalman filter as a prediction model for predicting the density of primary receivers. In addition, we provide a strategy to combine the obtained observations into a metric that can be used in routing design in the context of coexistence between Cognitive Radio Networks (CRNs) and primary networks. The proposed strategy, using fuzzy logic, is presented in Chapter 5. In this chapter, we investigate how the routing layer reacts and makes the right decisions to maximise the spectrum resources, while avoiding interference with the primary receivers. For instance, a CR node can operate in an overlap region if primary receivers are inactive within this area. Also, we propose a routing mechanism based on the DYMO routing protocol that takes into account the observed relative impact. In the same chapter, we provide some practical scenarios illustrating the usefulness of our proposal. Interconnecting the CR nodes in CRNs is also a critical problem for the establishment of the network. We therefore present a beacon-based dissemination process in Chapter 6. In this chapter, we also describe a practical device designed for cognitive radio experiments. Even though our work affects different protocol layers, the designed framework is cross-layered. Indeed, the different components of the proposed framework access the various layers to retrieve information, process it, and react accordingly. Thus, our work constitutes a cross-layer framework for a local cognitive radio that aims to minimise the interference and maximise the network resources in cognitive radio networks.Le plan d’attribution du spectre présente un problème de déficit de ressources dans les réseaux sans fil. En 2002, la FCC (Federal Communication Commission) a rapporté que le spectre radioélectrique était de 20% à 85% sous-utilisé. L’utilisation inefficace du spectre est un problème majeur qui doit être résolu si l’on veut que les communications radio se développent. La FCC a ensuite changé la politique de gestion du spectre pour la rendre plus souple en s’interessant à l’approche radio cognitive (CR). La radio cognitive est un type de radio intelligente qui explore l’environnement de fréquences radio, apprend et décide d’utiliser la partie inutilisée du spectre. Les principales fonctions de la CR sont la détection, la prise de décision, et le partage. Cependant, ces radios doivent respecter les infrastructures sans fil standards en minimisant leur impact sur les appareils prioritaires, également appelés systèmes primaires. La coexistence entre les systèmes CR et les systèmes primaires nécessite des processus d’observation et de gestion des interférences dédiés. Dans cette thèse, nous nous sommes intéressés à la phase d’observation du point de vue CR. La zone de chevauchement entre un émetteur CR et l’émetteur primaire (PR) est analysée et prise en compte. L’impact de cette zone est appris par simulation et présenté dans le chapitre 4. En conséquence, des interférences potentielles sont envisagées. Durant la phase d’observation, nous étudions un mécanisme permettant de mieux prévenir la perturbation sur les dispositifs PR en utilisant le Grey Model et le filtre de Kalman comme modèle de prédiction de la densité des récepteurs primaires. En complément à cette observation, nous fournissons une stratégie visant à combiner les observations obtenues en une mesure qui pourra être utilisée par le routage dans le cadre de la coexistence entre réseaux radio cognitive (CRN) et réseaux primaires. La stratégie proposée utilise la logique floue et est présentée dans le chapitre 5. Dans ce chapitre, nous étudions comment la couche réseau réagit et prend les bonnes décisions pour maximiser l’utilisation des ressources du spectre, tout en évitant les interférences avec les récepteurs primaires. Par exemple, un noeud CR peut fonctionner dans une zone de recouvrement, si les récepteurs primaires sont inactifs dans cette zone. Ainsi, nous avons proposé un mécanisme de routage basé sur le protocole de routage DYMO qui prend en compte l’impact relatif observé. Dans ce même chapitre, nous avons également présenté des scénarios pratiques illustrant l’utilité de notre proposition. L’interconnexion des noeuds CR dans le CRN est aussi un problème crucial pour la mise en place du réseau. C’est pourquoi nous présentons un processus de diffusion par balises au chapitre 6. Dans ce chapitre, nous décrivons également un dispositif pratique conçu pour des expériences en radio cognitive. Même si notre travail se rapporte à différentes couches de la pile protocolaire, le cadre général que nous avons conçu est multicouches. En effet, les composants accèdent aux différentes couches pour récupérer l’information, la traiter et réagir en conséquence. Ainsi, notre travail constitue un environnement inter-couches pour un dispositif radio cognitive local visant à minimiser les interférences et à maximiser les ressources réseau dans les réseaux radio cognitive

Transparent Spectrum Co-Access in Cognitive Radio Networks

The licensed wireless spectrum is currently under-utilized by as much as 85%. Cognitive radio networks have been proposed to employ dynamic spectrum access to share this under-utilized spectrum between licensed primary user transmissions and unlicensed secondary user transmissions. Current secondary user opportunistic spectrum access methods, however, remain limited in their ability to provide enough incentive to convince primary users to share the licensed spectrum, and they rely on primary user absence to guarantee secondary user performance. These challenges are addressed by developing a Dynamic Spectrum Co-Access Architecture (DSCA) that allows secondary user transmissions to co-access transparently and concurrently with primary user transmissions. This work exploits dirty paper coding to precode the cognitive radio channel utilizing the redundant information found in primary user relay networks. Subsequently, the secondary user is able to provide incentive to the primary user through increased SINR to encourage licensed spectrum sharing. Then a region of co-accessis formulated within which any secondary user can co-access the licensed channel transparently to the primary user. In addition, a Spectrum Co-Access Protocol (SCAP) is developed to provide secondary users with guaranteed channel capacity and while minimizing channel access times. The numerical results show that the SCAP protocol build on the DSCA architecture is able to reduce secondary user channel access times compared with opportunistic spectrum access and increased secondary user network throughput. Finally, we present a novel method for increasing the secondary user channel capacity through sequential dirty paper coding. By exploiting similar redundancy in secondary user multi-hop networks as in primary user relay networks, the secondary user channel capacity can be increased. As a result of our work in overlay spectrum sharing through secondary user channel precoding, we provide a compelling argument that the current trend towards opportunistic spectrum sharing needs to be reconsidered. This work asserts that limitations of opportunistic spectrum access to transparently provide primary users incentive and its detrimental effect on secondary user performance due to primary user activity are enough to motivate further study into utilizing channel precoding schemes. The success of cognitive radios and its adoption into federal regulator policy will rely on providing just this type of incentive

A new connectivity strategy for wireless mesh networks using dynamic spectrum access

The introduction of Dynamic Spectrum Access (DSA) marked an important juncture in the evolution of wireless networks. DSA is a spectrum assignment paradigm where devices are able to make real-time adjustment to their spectrum usage and adapt to changes in their spectral environment to meet performance objectives. DSA allows spectrum to be used more efficiently and may be considered as a viable approach to the ever increasing demand for spectrum in urban areas and the need for coverage extension to unconnected communities. While DSA can be applied to any spectrum band, the initial focus has been in the Ultra-High Frequency (UHF) band traditionally used for television broadcast because the band is lightly occupied and also happens to be ideal spectrum for sparsely populated rural areas. Wireless access in general is said to offer the most hope in extending connectivity to rural and unconnected peri-urban communities. Wireless Mesh Networks (WMN) in particular offer several attractive characteristics such as multi-hopping, ad-hoc networking, capabilities of self-organising and self-healing, hence the focus on WMNs. Motivated by the desire to leverage DSA for mesh networking, this research revisits the aspect of connectivity in WMNs with DSA. The advantages of DSA when combined with mesh networking not only build on the benefits, but also creates additional challenges. The study seeks to address the connectivity challenge across three key dimensions, namely network formation, link metric and multi-link utilisation. To start with, one of the conundrums faced in WMNs with DSA is that the current 802.11s mesh standard provides limited support for DSA, while DSA related standards such as 802.22 provide limited support for mesh networking. This gap in standardisation complicates the integration of DSA in WMNs as several issues are left outside the scope of the applicable standard. This dissertation highlights the inadequacy of the current MAC protocol in ensuring TVWS regulation compliance in multi-hop environments and proposes a logical link MAC sub-layer procedure to fill the gap. A network is considered compliant in this context if each node operates on a channel that it is allowed to use as determined for example, by the spectrum database. Using a combination of prototypical experiments, simulation and numerical analysis, it is shown that the proposed protocol ensures network formation is accomplished in a manner that is compliant with TVWS regulation. Having tackled the compliance problem at the mesh formation level, the next logical step was to explore performance improvement avenues. Considering the importance of routing in WMNs, the study evaluates link characterisation to determine suitable metric for routing purposes. Along this dimension, the research makes two main contributions. Firstly, A-link-metric (Augmented Link Metric) approach for WMN with DSA is proposed. A-link-metric reinforces existing metrics to factor in characteristics of a DSA channel, which is essential to improve the routing protocol's ranking of links for optimal path selection. Secondly, in response to the question of “which one is the suitable metric?”, the Dynamic Path Metric Selection (DPMeS) concept is introduced. The principal idea is to mechanise the routing protocol such that it assesses the network via a distributed probing mechanism and dynamically binds the routing metric. Using DPMeS, a routing metric is selected to match the network type and prevailing conditions, which is vital as each routing metric thrives or recedes in performance depending on the scenario. DPMeS is aimed at unifying the years worth of prior studies on routing metrics in WMNs. Simulation results indicate that A-link-metric achieves up to 83.4 % and 34.6 % performance improvement in terms of throughput and end-to-end delay respectively compared to the corresponding base metric (i.e. non-augmented variant). With DPMeS, the routing protocol is expected to yield better performance consistently compared to the fixed metric approach whose performance fluctuates amid changes in network setup and conditions. By and large, DSA-enabled WMN nodes will require access to some fixed spectrum to fall back on when opportunistic spectrum is unavailable. In the absence of fully functional integrated-chip cognitive radios to enable DSA, the immediate feasible solution for the interim is single hardware platforms fitted with multiple transceivers. This configuration results in multi-band multi-radio node capability that lends itself to a variety of link options in terms of transmit/receive radio functionality. The dissertation reports on the experimental performance evaluation of radios operating in the 5 GHz and UHF-TVWS bands for hybrid back-haul links. It is found that individual radios perform differently depending on the operating parameter settings, namely channel, channel-width and transmission power subject to prevailing environmental (both spectral and topographical) conditions. When aggregated, if the radios' data-rates are approximately equal, there is a throughput and round-trip time performance improvement of 44.5 - 61.8 % and 7.5 - 41.9 % respectively. For hybrid links comprising radios with significantly unequal data-rates, this study proposes an adaptive round-robin (ARR) based algorithm for efficient multilink utilisation. Numerical analysis indicate that ARR provides 75 % throughput improvement. These results indicate that network optimisation overall requires both time and frequency division duplexing. Based on the experimental test results, this dissertation presents a three-layered routing framework for multi-link utilisation. The top layer represents the nodes' logical interface to the WMN while the bottom layer corresponds to the underlying physical wireless network interface cards (WNIC). The middle layer is an abstract and reductive representation of the possible and available transmission, and reception options between node pairs, which depends on the number and type of WNICs. Drawing on the experimental results and insight gained, the study builds criteria towards a mechanism for auto selection of the optimal link option. Overall, this study is anticipated to serve as a springboard to stimulate the adoption and integration of DSA in WMNs, and further development in multi-link utilisation strategies to increase capacity. Ultimately, it is hoped that this contribution will collectively contribute effort towards attaining the global goal of extending connectivity to the unconnected

SPECTRUM SENSING AND COOPERATION IN COGNITIVE-OFDM BASED WIRELESS COMMUNICATIONS NETWORKS

The world has witnessed the development of many wireless systems and applications. In addition to the large number of existing devices, such development of new and advanced wireless systems increases rapidly the demand for more radio spectrum. The radio spectrum is a limited natural resource; however, it has been observed that it is not efficiently utilized. Consequently, different dynamic spectrum access techniques have been proposed as solutions for such an inefficient use of the spectrum. Cognitive Radio (CR) is a promising intelligent technology that can identify the unoccupied portions of spectrum and opportunistically uses those portions with satisfyingly high capacity and low interference to the primary users (i.e., licensed users). The CR can be distinguished from the classical radio systems mainly by its awareness about its surrounding radio frequency environment. The spectrum sensing task is the main key for such awareness. Due to many advantages, Orthogonal Frequency Division Multiplexing system (OFDM) has been proposed as a potential candidate for the CR‟s physical layer. Additionally, the Fast Fourier Transform (FFT) in an OFDM receiver supports the performance of a wide band spectrum analysis. Multitaper spectrum estimation method (MTM) is a non-coherent promising spectrum sensing technique. It tolerates problems related to bad biasing and large variance of power estimates. This thesis focuses, generally, on the local, multi antenna based, and global cooperative spectrum sensing techniques at physical layer in OFDM-based CR systems. It starts with an investigation on the performance of using MTM and MTM with singular value decomposition in CR networks using simulation. The Optimal MTM parameters are then found. The optimal MTM based detector theoretical formulae are derived. Different optimal and suboptimal multi antenna based spectrum sensing techniques are proposed to improve the local spectrum sensing performance. Finally, a new concept of cooperative spectrum sensing is introduced, and new strategies are proposed to optimize the hard cooperative spectrum sensing in CR networks. The MTM performance is controlled by the half time bandwidth product and number of tapers. In this thesis, such parameters have been optimized using Monte Carlo simulation. The binary hypothesis test, here, is developed to ensure that the effect of choosing optimum MTM parameters is based upon performance evaluation. The results show how these optimal parameters give the highest performance with minimum complexity when MTM is used locally at CR. The optimal MTM based detector has been derived using Neyman-Pearson criterion. That includes probabilities of detection, false alarm and misses detection approximate derivations in different wireless environments. The threshold and number of sensed samples controlling is based on this theoretical work. In order to improve the local spectrum sensing performance at each CR, in the CR network, multi antenna spectrum sensing techniques are proposed using MTM and MTM with singular value decomposition in this thesis. The statistical theoretical formulae of the proposed techniques are derived including the different probabilities. ii The proposed techniques include optimal, that requires prior information about the primary user signal, and two suboptimal multi antenna spectrum sensing techniques having similar performances with different computation complexity; these do not need prior information about the primary user signalling. The work here includes derivations for the periodogram multi antenna case. Finally, in hard cooperative spectrum sensing, the cooperation optimization is necessary to improve the overall performance, and/or minimize the number of data to be sent to the main CR-base station. In this thesis, a new optimization method based on optimizing the number of locally sensed samples at each CR is proposed with two different strategies. Furthermore, the different factors that affect the hard cooperative spectrum sensing optimization are investigated and analysed and a new cooperation scheme in spectrum sensing, the master node, is proposed.Ministry of Interior-Kingdom of Saudi Arabi

Spectrum sharing and management techniques in mobile networks

Το φάσμα συχνοτήτων αποδεικνύεται σπάνιο κομμάτι για τους πόρους ενός κινητού δικτύου το οποίο πρέπει να ληφθεί υπόψιν στη σχεδίαση τηλεπικοινωνιακών συστημάτων 5ης γενιάς. Επιπλέον οι πάροχοι κινητών δικτύων θα πρέπει να επαναπροσδιορίσουν επιχειρησιακά μοντέλα τα οποία μέχρι τώρα δεν θεωρούνταν αναγκαία (π.χ., γνωσιακά ραδιοδίκτυα), ή να εξετάσουν την υιοθέτηση νέων μοντέλων που αναδεικνύονται (π.χ., αδειοδοτούμενη από κοινού πρόσβαση) ώστε να καλύψουν τις ολοένα αυξανόμενες ανάγκες για εύρος ζώνης. Ο μερισμός φάσματος θεωρείται αναπόφευκτος για συστήματα 5G και η διατριβή παρέχει λύση για προσαρμοστικό μερισμό φάσματος με πολλαπλά καθεστώτα εξουσιοδότησης, βάσει ενός καινοτόμου αρχιτεκτονικού πλαισίου το οποίο επιτρέπει στα δικτυακά στοιχεία να λαμβάνουν αποφάσεις για απόκτηση φάσματος. Η προτεινόμενη διαδικασία λήψης αποφάσεων είναι μία καινοτόμα τεχνική προσαρμοστικού μερισμού φάσματος βασιζόμενη σε ελεγκτές ασαφούς λογικής που καθορίζονν το καταλληλότερο σχήμα μερισμού φάσματος και σε ενισχυμένη μάθηση που ρυθμίζει τους κανόνες ασαφούς λογικής, στοχεύοντας να βρει τη βέλτιστη πολιτική που πρέπει να ακολουθεί ο πάροχος ώστε να προσφέρει την επιθυμητή ποιότητα υπηρεσιών στους χρήστες, διατηρώντας πόρους (οικονομικούς ή ραδιοπόρους) όπου είναι εφικτό. Η τελευταία συνεισφορά της διατριβής είναι ένας μηχανισμός που εξασφαλίζει δίκαιη πρόσβαση σε φάσμα ανάμεσα σε χρήστες σε σενάρια στα οποία η εκχώρηση άδειας χρήσης φάσματος δεν είναι προαπαιτούμενη.Radio spectrum has loomed out to be a scarce resource that needs to be carefully considered when designing 5G communication systems and Mobile Network Operators (MNOs) will need to revisit business models that were not of their prior interest (e.g. Cognitive Radio) or consider adopting new business models that emerge (e.g. Licensed Shared Access) so as to cover the extended capacity needs. Spectrum sharing is considered unavoidable for 5G systems and this thesis provides a solution for adaptive spectrum sharing under multiple authorization regimes based on a novel architecture framework that enables network elements to proceed in decisions for spectrum acquisition. The decision making process for spectrum acquisition proposed is a novel Adaptive Spectrum Sharing technique that uses Fuzzy Logic controllers to determine the most suitable spectrum sharing option and reinforcement learning to tune the fuzzy logic rules, aiming to find an optimal policy that MNO should follow in order to offer the desirable Quality of Service to its users, while preserving resources (either economical, or radio) when possible. The final contribution of this thesis is a mechanism that ensures fair access to spectrum among the users in scenarios in which conveying spectrum license is not prerequisite

Estratégias de design de camada intermédia e cooperativa para redes sem fios energeticamente eficientes

Doutoramento conjunto MAP-i em InformáticaThe promise of a truly mobile experience is to have the freedom to roam around anywhere and not be bound to a single location. However, the energy required to keep mobile devices connected to the network over extended periods of time quickly dissipates. In fact, energy is a critical resource in the design of wireless networks since wireless devices are usually powered by batteries. Furthermore, multi-standard mobile devices are allowing users to enjoy higher data rates with ubiquitous connectivity. However, the bene ts gained from multiple interfaces come at a cost in terms of energy consumption having profound e ect on the mobile battery lifetime and standby time. This concern is rea rmed by the fact that battery lifetime is one of the top reasons why consumers are deterred from using advanced multimedia services on their mobile on a frequent basis. In order to secure market penetration for next generation services energy e ciency needs to be placed at the forefront of system design. However, despite recent e orts, energy compliant features in legacy technologies are still in its infancy, and new disruptive architectures coupled with interdisciplinary design approaches are required in order to not only promote the energy gain within a single protocol layer, but to enhance the energy gain from a holistic perspective. A promising approach is cooperative smart systems, that in addition to exploiting context information, are entities that are able to form a coalition and cooperate in order to achieve a common goal. Migrating from this baseline, this thesis investigates how these technology paradigm can be applied towards reducing the energy consumption in mobile networks. In addition, we introduce an additional energy saving dimension by adopting an interlayer design so that protocol layers are designed to work in synergy with the host system, rather than independently, for harnessing energy. In this work, we exploit context information, cooperation and inter-layer design for developing new energy e cient and technology agnostic building blocks for mobile networks. These technology enablers include energy e cient node discovery and short-range cooperation for energy saving in mobile handsets, complemented by energy-aware smart scheduling for promoting energy saving on the network side. Analytical and simulations results were obtained, and veri ed in the lab on a real hardware testbed. Results have shown that up to 50% energy saving could be obtained.A promessa de uma experiência realmente móvel é de ter a liberdade de deambular por qualquer sítio e não estar preso a um único local. No entanto, a energia requerida para manter dispositivos móveis conectados à rede, num período extenso de tempo, o mesmo rapidamente se dissipa. Na realidade, a energia é um recurso crítico no design de redes sem fios, uma vez que esses dispositivos são alimentados por baterias. Para além disso, dispositivos móveis multi-standard permitem que os utilizadores desfrutem de elevadas taxas de dados com conectividade omnipresente. No entanto, as vantagens adquiridas pelas múltiplas interfaces, imputa uma despesa, sendo essa um consumo maior de energia, numa era onde os dispositivos móveis têm de ser energicamente complacentes. Esta preocupação é reafirmada pelo facto de que a vida da bateria é uma das principais razões que impede os utilizadores de usufruir e utilizar de serviços de multimédia mais avançados nos seus dispositivos, numa base frequente. De forma a assegurar a entrada no mercado para serviços da próxima geração, eficiência energética tem de ser colocada na vanguarda do design de sistemas. No entanto, apesar de esforços recentes, funcionalidades que cumpram os requisitos energéticos em tecnologias "legacy" ainda estão nos seus primórdios e novas abordagens disruptivas são requeridas, juntamente com abordagem de design interdisciplinar, de forma a aproveitar a poupança energética das diversas camadas protocolares. Uma bordagem promissora são os sistemas de cooperação inteligente, que exploram não são contexto da informação, mas também as entidades que são igualmente capazes de formar uma coligação e cooperam de forma a atingir um objectivo comum. Migrar a partir destas referências, esta tese investiga como é que este paradigma tecnológico pode ser aplicado para reduzir a potência e consumo de energia em redes móveis. Para além disso, introduzimos uma dimensão de poupança energética adicional, para adopção de design de camadas intermédias, de forma a que as camadas de protocolos sejam concebidas para trabalhar em sinergia com o sistema anfitrião, ao invés de independentemente, para aproveitamento de energia. Neste trabalho, nós exploramos o contexto da informação, cooperação e design de camadas intermédias para desenvolver blocos de construção energicamente eficientes e tecnologias agnósticas para redes móveis. Estes habilitadores (enablers) tecnológicos incluem um nó de descoberta de energia eficiente e cooperação de curto alcance para poupança energética em aparelhos móveis, complementado com agendamento inteligente, energicamente consciente, de forma a promover a poupança de energia do lado da rede. Analiticamente e simultaneamente, foram obtidos resultados e verificados em laboratório, num modelo de hardware protótipo. Resultados demonstram que pode ser obtido uma poupança energética acima dos 50%