Distributed data cache designs for clustered VLIW processors

Wire delays are a major concern for current and forthcoming processors. One approach to deal with this problem is to divide the processor into semi-independent units referred to as clusters. A cluster usually consists of a local register file and a subset of the functional units, while the L1 data cache typically remains centralized in What we call partially distributed architectures. However, as technology evolves, the relative latency of such a centralized cache will increase, leading to an important impact on performance. In this paper, we propose partitioning the L1 data cache among clusters for clustered VLIW processors. We refer to this kind of design as fully distributed processors. In particular; we propose and evaluate three different configurations: a snoop-based cache coherence scheme, a word-interleaved cache, and flexible LO-buffers managed by the compiler. For each alternative, instruction scheduling techniques targeted to cyclic code are developed. Results for the Mediabench suite'show that the performance of such fully distributed architectures is always better than the performance of a partially distributed one with the same amount of resources. In addition, the key aspects of each fully distributed configuration are explored.Peer ReviewedPostprint (published version

Hierarchical clustered register file organization for VLIW processors

Technology projections indicate that wire delays will become one of the biggest constraints in future microprocessor designs. To avoid long wire delays and therefore long cycle times, processor cores must be partitioned into components so that most of the communication is done locally. In this paper, we propose a novel register file organization for VLIW cores that combines clustering with a hierarchical register file organization. Functional units are organized in clusters, each one with a local first level register file. The local register files are connected to a global second level register file, which provides access to memory. All intercluster communications are done through the second level register file. This paper also proposes MIRS-HC, a novel modulo scheduling technique that simultaneously performs instruction scheduling, cluster selection, inserts communication operations, performs register allocation and spill insertion for the proposed organization. The results show that although more cycles are required to execute applications, the execution time is reduced due to a shorter cycle time. In addition, the combination of clustering and hierarchy provides a larger design exploration space that trades-off performance and technology requirements.Peer ReviewedPostprint (published version

A software-hardware hybrid steering mechanism for clustered microarchitectures

Clustered microarchitectures provide a promising paradigm to solve or alleviate the problems of increasing microprocessor complexity and wire delays. High- performance out-of-order processors rely on hardware-only steering mechanisms to achieve balanced workload distribution among clusters. However, the additional steering logic results in a significant increase on complexity, which actually decreases the benefits of the clustered design. In this paper, we address this complexity issue and present a novel software-hardware hybrid steering mechanism for out-of-order processors. The proposed software- hardware cooperative scheme makes use of the concept of virtual clusters. Instructions are distributed to virtual clusters at compile time using static properties of the program such as data dependences. Then, at runtime, virtual clusters are mapped into physical clusters by considering workload information. Experiments using SPEC CPU2000 benchmarks show that our hybrid approach can achieve almost the same performance as a state-of-the-art hardware-only steering scheme, while requiring low hardware complexity. In addition, the proposed mechanism outperforms state-of-the-art software-only steering mechanisms by 5% and 10% on average for 2-cluster and 4-cluster machines, respectively.Peer ReviewedPostprint (published version

Survey on Combinatorial Register Allocation and Instruction Scheduling

Register allocation (mapping variables to processor registers or memory) and instruction scheduling (reordering instructions to increase instruction-level parallelism) are essential tasks for generating efficient assembly code in a compiler. In the last three decades, combinatorial optimization has emerged as an alternative to traditional, heuristic algorithms for these two tasks. Combinatorial optimization approaches can deliver optimal solutions according to a model, can precisely capture trade-offs between conflicting decisions, and are more flexible at the expense of increased compilation time. This paper provides an exhaustive literature review and a classification of combinatorial optimization approaches to register allocation and instruction scheduling, with a focus on the techniques that are most applied in this context: integer programming, constraint programming, partitioned Boolean quadratic programming, and enumeration. Researchers in compilers and combinatorial optimization can benefit from identifying developments, trends, and challenges in the area; compiler practitioners may discern opportunities and grasp the potential benefit of applying combinatorial optimization

Extending Static Synchronization Beyond SIMD and VLIW

A key advantage of SIMD (Single Instruction stream, Multiple Data stream) architectures is that synchronization is effected statically at compile-time, hence the execution-time cost of synchronization between “processes” is essentially zero. VLIW (Very Long Instruction Word) machines are successful in large part because they preserve this property while providing more flexibility in terms of what kinds of operations can be parallelized. In this paper, we propose a new kind of architecture —- the “static barrier MIMD” or SBM — which can be viewed as a further generalization of the parallel execution abilities of static synchronization machines. Barrier MIMDs are asynchronous Multiple Instruction stream Multiple Data stream architectures capable of parallel execution of loops, subprogram calls, and variable execution- time instructions; however, little or no run-time synchronization is needed. When a group of processors within a barrier MIMD has just encountered a barrier, any conceptual synchronizations between the processors are statically accomplished with zero cost — as in a SIMD or VLIW and using similar compiler technology. Unlike these machines, however, as execution continues the relative timing of processors may become less precisely knowable as a static, compile-time, quantity. Where this imprecision becomes too large, the compiler simply inserts a synchronization barrier to insure that timing imprecision at that point is zero, and again employs purely static, implicit, synchronization. Both the architecture and the supporting compiler technology are discussed in detail

Effective instruction scheduling techniques for an interleaved cache clustered VLIW processor

Clustering is a common technique to overcome the wire delay problem incurred by the evolution of technology. Fully-distributed architectures, where the register file, the functional units and the data cache are partitioned, are particularly effective to deal with these constraints and besides they are very scalable. In this paper effective instruction scheduling techniques for a clustered VLIW processor with a word-interleaved cache are proposed Such scheduling techniques rely on: (i) loop unrolling and variable alignment to increase the percentage of local accesses, (ii) a latency assignment process to schedule memory operations with an appropriate latency and (iii) different heuristics to assign instructions to clusters. In particular, the number of local accesses is increased by more than 25% if these techniques are used and the ratio of stall time over compute time is small. Next, the main source of remote accesses and stall time is investigated. Stall time is mainly due to remote hits, and Attraction Buffers are used to increase local accesses and reduce stall time. Stall time is reduced by 29% and 34% depending on the scheduling heuristic. IPC results for a word-interleaved cache clustered VLIW processor are similar to those of the multiVLIW (a cache-coherent clustered processor with a more complex hardware design), and are 10% and 5% better (depending on the scheduling heuristic) than the IPC for a clustered processor with a unified cache.Peer ReviewedPostprint (published version

Local scheduling techniques for memory coherence in a clustered VLIW processor with a distributed data cache

Clustering is a common technique to deal with wire delays. Fully-distributed architectures, where the register file, the functional units and the cache memory are partitioned, are particularly effective to deal with these constraints and besides they are very scalable. However the distribution of the data cache introduces a new problem: memory instructions may reach the cache in an order different to the sequential program order, thus possibly violating its contents. In this paper two local scheduling mechanisms that guarantee the serialization of aliased memory instructions are proposed and evaluated: the construction of memory dependent chains (MDC solution), and two transformations (store replication and load-store synchronization) applied to the original data dependence graph (DDGT solution). These solutions do not require any extra hardware. The proposed scheduling techniques are evaluated for a word-interleaved cache clustered VLIW processor (although these techniques can also be used for any other distributed cache configuration). Results for the Mediabench benchmark suite demonstrate the effectiveness of such techniques. In particular, the DDGT solution increases the proportion of local accesses by 16% compared to MDC, and stall time is reduced by 32% since load instructions can be freely scheduled in any cluster However the MDC solution reduces compute time and it often outperforms the former. Finally the impact of both techniques on an architecture with attraction buffers is studied and evaluated.Peer ReviewedPostprint (published version

Constraint analysis for DSP code generation

+113hlm.;24c

Doctor of Philosophy

dissertationThe embedded system space is characterized by a rapid evolution in the complexity and functionality of applications. In addition, the short time-to-market nature of the business motivates the use of programmable devices capable of meeting the conflicting constraints of low-energy, high-performance, and short design times. The keys to achieving these conflicting constraints are specialization and maximally extracting available application parallelism. General purpose processors are flexible but are either too power hungry or lack the necessary performance. Application-specific integrated circuits (ASICS) efficiently meet the performance and power needs but are inflexible. Programmable domain-specific architectures (DSAs) are an attractive middle ground, but their design requires significant time, resources, and expertise in a variety of specialties, which range from application algorithms to architecture and ultimately, circuit design. This dissertation presents CoGenE, a design framework that automates the design of energy-performance-optimal DSAs for embedded systems. For a given application domain and a user-chosen initial architectural specification, CoGenE consists of a a Compiler to generate execution binary, a simulator Generator to collect performance/energy statistics, and an Explorer that modifies the current architecture to improve energy-performance-area characteristics. The above process repeats automatically until the user-specified constraints are achieved. This removes or alleviates the time needed to understand the application, manually design the DSA, and generate object code for the DSA. Thus, CoGenE is a new design methodology that represents a significant improvement in performance, energy dissipation, design time, and resources. This dissertation employs the face recognition domain to showcase a flexible architectural design methodology that creates "ASIC-like" DSAs. The DSAs are instruction set architecture (ISA)-independent and achieve good energy-performance characteristics by coscheduling the often conflicting constraints of data access, data movement, and computation through a flexible interconnect. This represents a significant increase in programming complexity and code generation time. To address this problem, the CoGenE compiler employs integer linear programming (ILP)-based 'interconnect-aware' scheduling techniques for automatic code generation. The CoGenE explorer employs an iterative technique to search the complete design space and select a set of energy-performance-optimal candidates. When compared to manual designs, results demonstrate that CoGenE produces superior designs for three application domains: face recognition, speech recognition and wireless telephony. While CoGenE is well suited to applications that exhibit a streaming behavior, multithreaded applications like ray tracing present a different but important challenge. To demonstrate its generality, CoGenE is evaluated in designing a novel multicore N-wide SIMD architecture, known as StreamRay, for the ray tracing domain. CoGenE is used to synthesize the SIMD execution cores, the compiler that generates the application binary, and the interconnection subsystem. Further, separating address and data computations in space reduces data movement and contention for resources, thereby significantly improving performance compared to existing ray tracing approaches