Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application.Postprint (published version

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application

A data dependency recovery system for a heterogeneous multicore processor

Multicore processors often increase the performance of applications. However, with their deeper pipelining, they have proven increasingly difficult to improve. In an attempt to deliver enhanced performance at lower power requirements, semiconductor microprocessor manufacturers have progressively utilised chip-multicore processors. Existing research has utilised a very common technique known as thread-level speculation. This technique attempts to compute results before the actual result is known. However, thread-level speculation impacts operation latency, circuit timing, confounds data cache behaviour and code generation in the compiler. We describe an software framework codenamed Lyuba that handles low-level data hazards and automatically recovers the application from data hazards without programmer and speculation intervention for an asymmetric chip-multicore processor. The problem of determining correct execution of multiple threads when data hazards occur on conventional symmetrical chip-multicore processors is a significant and on-going challenge. However, there has been very little focus on the use of asymmetrical (heterogeneous) processors with applications that have complex data dependencies. The purpose of this thesis is to: (i) define the development of a software framework for an asymmetric (heterogeneous) chip-multicore processor; (ii) present an optimal software control of hardware for distributed processing and recovery from violations;(iii) provides performance results of five applications using three datasets. Applications with a small dataset showed an improvement of 17% and a larger dataset showed an improvement of 16% giving overall 11% improvement in performance

System software techniques to enhance reliability of modern platforms

192

Performance Optimization Strategies for Transactional Memory Applications

This thesis presents tools for Transactional Memory (TM) applications that cover multiple TM systems (Software, Hardware, and hybrid TM) and use information of all different layers of the TM software stack. Therefore, this thesis addresses a number of challenges to extract static information, information about the run time behavior, and expert-level knowledge to develop these new methods and strategies for the optimization of TM applications

Designs for increasing reliability while reducing energy and increasing lifetime

In the last decades, the computing technology experienced tremendous developments. For instance, transistors' feature size shrank to half at every two years as consistently from the first time Moore stated his law. Consequently, number of transistors and core count per chip doubles at each generation. Similarly, petascale systems that have the capability of processing more than one billion calculation per second have been developed. As a matter of fact, exascale systems are predicted to be available at year 2020. However, these developments in computer systems face a reliability wall. For instance, transistor feature sizes are getting so small that it becomes easier for high-energy particles to temporarily flip the state of a memory cell from 1-to-0 or 0-to-1. Also, even if we assume that fault-rate per transistor stays constant with scaling, the increase in total transistor and core count per chip will significantly increase the number of faults for future desktop and exascale systems. Moreover, circuit ageing is exacerbated due to increased manufacturing variability and thermal stresses, therefore, lifetime of processor structures are becoming shorter. On the other side, due to the limited power budget of the computer systems such that mobile devices, it is attractive to scale down the voltage. However, when the voltage level scales to beyond the safe margin especially to the ultra-low level, the error rate increases drastically. Nevertheless, new memory technologies such as NAND flashes present only limited amount of nominal lifetime, and when they exceed this lifetime, they can not guarantee storing of the data correctly leading to data retention problems. Due to these issues, reliability became a first-class design constraint for contemporary computing in addition to power and performance. Moreover, reliability even plays increasingly important role when computer systems process sensitive and life-critical information such as health records, financial information, power regulation, transportation, etc. In this thesis, we present several different reliability designs for detecting and correcting errors occurring in processor pipelines, L1 caches and non-volatile NAND flash memories due to various reasons. We design reliability solutions in order to serve three main purposes. Our first goal is to improve the reliability of computer systems by detecting and correcting random and non-predictable errors such as bit flips or ageing errors. Second, we aim to reduce the energy consumption of the computer systems by allowing them to operate reliably at ultra-low voltage level. Third, we target to increase the lifetime of new memory technologies by implementing efficient and low-cost reliability schemes

BlobCR: Virtual Disk Based Checkpoint-Restart for HPC Applications on IaaS Clouds

International audienceInfrastructure-as-a-Service (IaaS) cloud computing is gaining significant interest in industry and academia as an alternative platform for running HPC applications. Given the need to provide fault tolerance, support for suspend-resume and offline migration, an efficient Checkpoint-Restart mechanism becomes paramount in this context. We propose BlobCR, a dedicated checkpoint repository that is able to take live incremental snapshots of the whole disk attached to the virtual machine (VM) instances. BlobCR aims to minimize the performance overhead of checkpointing by persisting VM disk snapshots asynchronously in the background using a low overhead technique we call selective copy-on-write. It includes support for both application-level and process-level checkpointing, as well as support to roll back file system changes. Experiments at large scale demonstrate the benefits of our proposal both in synthetic settings and for a real-life HPC application

Overcoming the Intuition Wall: Measurement and Analysis in Computer Architecture

These are exciting times for computer architecture research. Today there is significant demand to improve the performance and energy-efficiency of emerging, transformative applications which are being hammered out by the hundreds for new computing platforms and usage models. This booming growth of applications and the variety of programming languages used to create them is challenging our ability as architects to rapidly and rigorously characterize these applications. Concurrently, hardware has become more complex with the emergence of accelerators, multicore systems, and heterogeneity caused by further divergence between processor market segments. No one architect can now understand all the complexities of many systems and reason about the full impact of changes or new applications. To that end, this dissertation presents four case studies in quantitative methods. Each case study attacks a different application and proposes a new measurement or analytical technique. In each case study we find at least one surprising or unintuitive result which would likely not have been found without the application of our method