Overview of evolved Multimedia Broadcast Multicast Services (eMBMS)

MBMS was introduced as a service to optimize the dissemination of common interest multimedia content. Recently, it evolved to eMBMS based on LTE-centered flexibilities. However, launch of eMBMS over LTE may support new services e.g. pushed content for M2M services and delivery of premium content to the users enjoying secured QoS. This document primarily focusses on the rules, procedures and architecture supporting MBMS based data exchanges, which have not seen any major changes since Release 9

Role of Interference and Computational Complexity in Modern Wireless Networks: Analysis, Optimization, and Design

Owing to the popularity of smartphones, the recent widespread adoption of wireless broadband has resulted in a tremendous growth in the volume of mobile data traffic, and this growth is projected to continue unabated. In order to meet the needs of future systems, several novel technologies have been proposed, including cooperative communications, cloud radio access networks (RANs) and very densely deployed small-cell networks. For these novel networks, both interference and the limited availability of computational resources play a very important role. Therefore, the accurate modeling and analysis of interference and computation is essential to the understanding of these networks, and an enabler for more efficient design.;This dissertation focuses on four aspects of modern wireless networks: (1) Modeling and analysis of interference in single-hop wireless networks, (2) Characterizing the tradeoffs between the communication performance of wireless transmission and the computational load on the systems used to process such transmissions, (3) The optimization of wireless multiple-access networks when using cost functions that are based on the analytical findings in this dissertation, and (4) The analysis and optimization of multi-hop networks, which may optionally employ forms of cooperative communication.;The study of interference in single-hop wireless networks proceeds by assuming that the random locations of the interferers are drawn from a point process and possibly constrained to a finite area. Both the information-bearing and interfering signals propagate over channels that are subject to path loss, shadowing, and fading. A flexible model for fading, based on the Nakagami distribution, is used, though specific examples are provided for Rayleigh fading. The analysis is broken down into multiple steps, involving subsequent averaging of the performance metrics over the fading, the shadowing, and the location of the interferers with the aim to distinguish the effect of these mechanisms that operate over different time scales. The analysis is extended to accommodate diversity reception, which is important for the understanding of cooperative systems that combine transmissions that originate from different locations. Furthermore, the role of spatial correlation is considered, which provides insight into how the performance in one location is related to the performance in another location.;While it is now generally understood how to communicate close to the fundamental limits implied by information theory, operating close to the fundamental performance bounds is costly in terms of the computational complexity required to receive the signal. This dissertation provides a framework for understanding the tradeoffs between communication performance and the imposed complexity based on how close a system operates to the performance bounds, and it allows to accurately estimate the required data processing resources of a network under a given performance constraint. The framework is applied to Cloud-RAN, which is a new cellular architecture that moves the bulk of the signal processing away from the base stations (BSs) and towards a centralized computing cloud. The analysis developed in this part of the dissertation helps to illuminate the benefits of pooling computing assets when decoding multiple uplink signals in the cloud. Building upon these results, new approaches for wireless resource allocation are proposed, which unlike previous approaches, are aware of the computing limitations of the network.;By leveraging the accurate expressions that characterize performance in the presence of interference and fading, a methodology is described for optimizing wireless multiple-access networks. The focus is on frequency hopping (FH) systems, which are already widely used in military systems, and are becoming more common in commercial systems. The optimization determines the best combination of modulation parameters (such as the modulation index for continuous-phase frequency-shift keying), number of hopping channels, and code rate. In addition, it accounts for the adjacent-channel interference (ACI) and determines how much of the signal spectrum should lie within the operating band of each channel, and how much can be allowed to splatter into adjacent channels.;The last part of this dissertation contemplates networks that involve multi-hop communications. Building on the analytical framework developed in early parts of this dissertation, the performance of such networks is analyzed in the presence of interference and fading, and it is introduced a novel paradigm for a rapid performance assessment of routing protocols. Such networks may involve cooperative communications, and the particular cooperative protocol studied here allows the same packet to be transmitted simultaneously by multiple transmitters and diversity combined at the receiver. The dynamics of how the cooperative protocol evolves over time is described through an absorbing Markov chain, and the analysis is able to efficiently capture the interference that arises as packets are periodically injected into the network by a common source, the temporal correlation among these packets and their interdependence

Radio resource allocation algorithms for multicast OFDM systems

Mención Internacional en el título de doctorVideo services have become highly demanded in mobile networks leading to an unprecedented traffic growth. It is expected that traffic from wireless and mobile devices will account for nearly 70 percent of total IP traffic by the year 2020, and the video services will account for nearly 75 percent of mobile data traffic by 2022. Multicast transmission is one of the key enablers towards a more spectral and energy efficient distribution of multimedia content in current and envisaged mobile networks. It is worth noting that multicast is a mechanism that efficiently delivers the same content to many users, not only focusing on video broadcasting, but also distributing many other media, such as software updates, weather forecast or breaking news. Although multicast services are available in Long Term Evolution (LTE) and LTE-Advanced (LTE-A) networks, new improvements are needed in some areas to handle the demands expected in the near future. Resource allocation techniques for multicast services are one of the main challenging issues, since it is required the development of novel schemes to meet the demands of their evolution towards the next generation. Most multicast techniques adopt rather conservative strategies that select a very robust modulation and coding scheme (MCS), whose characteristics are determined by the propagation conditions experienced by the worst user in the group in order to ensure that all users in a multicast group are able to correctly decode the received data. Obviously, this robustness comes at the prize of a low spectral efficiency. This thesis presents an exhaustive study of broadcast/multicast technology for current mobile networks, especially focusing on the scheduling and resource allocation (SRA) strategies to maximize the potential benefits that multicast transmissions imply on the spectral efficiency. Based on that issue, some contributions have been made to the state of the art in the radio resource management (RRM) for current and beyond mobile multicast services. • In the frame of LTE/LTE-A, the evolved multimedia broadcast and multicast service (eMBMS) shares the physical layer resources with the unicast transmission mode (at least up to Release 12). Consequently, the time allocation to multicast transmission is limited to a maximum of a 60 percent, and the remaining subframes (at least 40 percent) are reserved for unicast transmissions. With the aim of achieving the maximum aggregated data rate (ADR) among the multicast users, we have implemented several innovative SRA schemes that combine the allocation of multicast and unicast resources in the LTE/LTE-A frame, guaranteeing the prescribed quality of service (QoS) requirements for every user. • In the specific context of wideband communication systems, the selection of the multicast MCS has often relied on the use of wideband channel quality indicators (CQIs), providing rather imprecise information regarding the potential capacity of the multicast channel. Only recently has the per-subband CQI been used to improve the spectral efficiency of the system without compromising the link robustness. We have proposed novel subband CQI-based multicast SRA strategies that, relying on the selection of more spectrally efficient transmission modes, lead to increased data rates while still being able to fulfill prescribed QoS metrics. • Mobile broadcast/multicast video services require effective and low complexity SRA strategies. We have proposed an SRA strategy based on multicast subgrouping and the scalable video coding (SVC) technique for multicast video delivery. This scheme focuses on reducing the search space of solutions and optimizes the ADR. The results in terms of ADR, spectral efficiency, and fairness among multicast users, along with the low complexity of the algorithm, show that this new scheme is adequate for real systems. These contributions are intended to serve as a reference that motivate ongoing and future investigation in the challenging field of RRM for broadcast/ multicast services in next generation mobile networks.La demanda de servicios de vídeo en las redes móviles ha sufrido un incremento exponencial en los últimos años, lo que a su vez ha desembocado en un aumento sin precedentes del tráfico de datos. Se espera que antes del año 2020, el trafico debido a dispositivos móviles alcance cerca del 70 por ciento del tráfico IP total, mientras que se prevé que los servicios de vídeo sean prácticamente el 75 por ciento del tráfico de datos en las redes móviles hacia el 2022. Las transmisiones multicast son una de las tecnologías clave para conseguir una distribución más eficiente, tanto espectral como energéticamente, del contenido multimedia en las redes móviles actuales y futuras. Merece la pena reseñar que el multicast es un mecanismo de entrega del mismo contenido a muchos usuarios, que no se enfoca exclusivamente en la distribución de vídeo, sino que también permite la distribución de otros muchos contenidos, como actualizaciones software, información meteorológica o noticias de última hora. A pesar de que los servicios multicast ya se encuentran disponibles en las redes Long Term Evolution (LTE) y LTE-Advanced (LTE-A), la mejora en algunos ámbitos resulta necesaria para manejar las demandas que se prevén a corto plazo. Las técnicas de asignación de recursos para los servicios multicast suponen uno de los mayores desafíos, ya que es necesario el desarrollo de nuevos esquemas que nos permitan acometer las exigencias que supone su evolución hacia la próxima generación. La mayor parte de las técnicas multicast adoptan estrategias conservadoras, seleccionando esquemas de modulación y codificación (MCS) impuestos por las condiciones de propagación que experimenta el usuario del grupo con peor canal, para así asegurar que todos los usuarios pertenecientes al grupo multicast sean capaces de decodificar correctamente los datos recibidos. Como resulta obvio, la utilización de esquemas tan robustos conlleva el precio de sufrir una baja eficiencia espectral. Esta tesis presenta un exhaustivo estudio de la tecnología broadcast/ multicast para las redes móviles actuales, que se centra especialmente en las estrategias de asignación de recursos (SRA), cuyo objetivo es maximizar los beneficios que la utilización de transmisiones multicast potencialmente implica en términos de eficiencia espectral. A partir de dicho estudio, hemos realizado varias contribuciones al estado del arte en el ámbito de la gestión de recursos radio (RRM) para los servicios multicast, aplicables en las redes móviles actuales y futuras. • En el marco de LTE/LTE-A, el eMBMS comparte los recursos de la capa física con las transmisiones unicast (al menos hasta la revisión 12). Por lo tanto, la disponibilidad temporal de las transmisiones multicast está limitada a un máximo del 60 por ciento, reservándose las subtramas restantes (al menos el 40 por ciento) para las transmisiones unicast. Con el objetivo de alcanzar la máxima tasa total de datos (ADR) entre los usuarios multicast, hemos implementado varios esquemas innovadores de SRA que combinan la asignación de los recursos multicast y unicast de la trama LTE/LTE-A, garantizando los requisitos de QoS a cada usuario. • En los sistemas de comunicaciones de banda ancha, la selección del MCS para transmisiones multicast se basa habitualmente en la utilización de CQIs de banda ancha, lo que proporciona información bastante imprecisa acerca de la capacidad potencial del canal multicast. Recientemente se ha empezado a utilizar el CQI por subbanda para mejorar la eficiencia espectral del sistema sin comprometer la robustez de los enlaces. Hemos propuesto nuevas estrategias para SRA multicast basadas en el CQI por subbanda que, basándose en la selección de los modos de transmisión con mayor eficiencia espectral, conducen a mejores tasas de datos, a la vez que permiten cumplir los requisitos de QoS. • Los servicios móviles de vídeo broadcast/multicast precisan estrategias eficientes de SRA con baja complejidad. Hemos propuesto una estrategia de SRA basada en subgrupos multicast y la técnica de codificación de vídeo escalable (SVC) para la difusión de vídeo multicast, la cual se centra en reducir el espacio de búsqueda de soluciones y optimizar el ADR. Los resultados obtenidos en términos de ADR, eficiencia espectral y equidad entre los usuarios multicast, junto con la baja complejidad del algoritmo, ponen de manifiesto que el esquema propuesto es adecuado para su implantación en sistemas reales. Estas contribuciones pretenden servir de referencia que motive la investigación actual y futura en el interesante ámbito de RRM para los servicios broadcast/multicast en las redes móviles de próxima generación.Programa Oficial de Doctorado en Multimedia y ComunicacionesPresidente: Atilio Manuel Da Silva Gameiro.- Secretario: Víctor Pedro Gil Jiménez.- Vocal: María de Diego Antó

Performance Evaluation of LTE and LTE advanced standards for next generation mobile networks

Nel corso della trattazione sono analizzati gli standard 3GPP LTE e LTE-Advanced per la prossima generazione delle reti mobili cellulari. L'algoritmo OptiMOS, che può essere impiegato dalla Stazione Base per servire in modo efficiente connessioni VoIP, è descritto nel capitolo [8]. L’algoritmo di link scheduling Relay, finalizzato a ottimizzare le reti LTE avanzate in presenza di nodi relay è descritto nel capitolo [9]. Questo lavoro è stato presentato in adempimento parziale dei requisiti per la Laurea di Dottore di Ricerca in Ingegneria dell'Informazione presso l'ufficio informazioni Dipartimento di Ingegneria dell'Università degli Studi di Pisa, Italia

Algorithm-Architecture Co-Design for Digital Front-Ends in Mobile Receivers

The methodology behind this work has been to use the concept of algorithm-hardware co-design to achieve efficient solutions related to the digital front-end in mobile receivers. It has been shown that, by looking at algorithms and hardware architectures together, more efficient solutions can be found; i.e., efficient with respect to some design measure. In this thesis the main focus have been placed on two such parameters; first reduced complexity algorithms to lower energy consumptions at limited performance degradation, secondly to handle the increasing number of wireless standards that preferably should run on the same hardware platform. To be able to perform this task it is crucial to understand both sides of the table, i.e., both algorithms and concepts for wireless communication as well as the implications arising on the hardware architecture. It is easier to handle the high complexity by separating those disciplines in a way of layered abstraction. However, this representation is imperfect, since many interconnected "details" belonging to different layers are lost in the attempt of handling the complexity. This results in poor implementations and the design of mobile terminals is no exception. Wireless communication standards are often designed based on mathematical algorithms with theoretical boundaries, with few considerations to actual implementation constraints such as, energy consumption, silicon area, etc. This thesis does not try to remove the layer abstraction model, given its undeniable advantages, but rather uses those cross-layer "details" that went missing during the abstraction. This is done in three manners: In the first part, the cross-layer optimization is carried out from the algorithm perspective. Important circuit design parameters, such as quantization are taken into consideration when designing the algorithm for OFDM symbol timing, CFO, and SNR estimation with a single bit, namely, the Sign-Bit. Proof-of-concept circuits were fabricated and showed high potential for low-end receivers. In the second part, the cross-layer optimization is accomplished from the opposite side, i.e., the hardware-architectural side. A SDR architecture is known for its flexibility and scalability over many applications. In this work a filtering application is mapped into software instructions in the SDR architecture in order to make filtering-specific modules redundant, and thus, save silicon area. In the third and last part, the optimization is done from an intermediate point within the algorithm-architecture spectrum. Here, a heterogeneous architecture with a combination of highly efficient and highly flexible modules is used to accomplish initial synchronization in at least two concurrent OFDM standards. A demonstrator was build capable of performing synchronization in any two standards, including LTE, WiFi, and DVB-H

Towards reliable communication in LTE-A connected heterogeneous machine to machine network

Machine to machine (M2M) communication is an emerging technology that enables heterogeneous devices to communicate with each other without human intervention and thus forming so-called Internet of Things (IoTs). Wireless cellular networks (WCNs) play a significant role in the successful deployment of M2M communication. Specially the ongoing massive deployment of long term evolution advanced (LTE-A) makes it possible to establish machine type communication (MTC) in most urban and remote areas, and by using LTE-A backhaul network, a seamless network communication is being established between MTC-devices and-applications. However, the extensive network coverage does not ensure a successful implementation of M2M communication in the LTE-A, and therefore there are still some challenges. Energy efficient reliable transmission is perhaps the most compelling demand for various M2M applications. Among the factors affecting reliability of M2M communication are the high endto-end delay and high bit error rate. The objective of the thesis is to provide reliable M2M communication in LTE-A network. In this aim, to alleviate the signalling congestion on air interface and efficient data aggregation we consider a cluster based architecture where the MTC devices are grouped into number of clusters and traffics are forwarded through some special nodes called cluster heads (CHs) to the base station (BS) using single or multi-hop transmissions. In many deployment scenarios, some machines are allowed to move and change their location in the deployment area with very low mobility. In practice, the performance of data transmission often degrades with the increase of distance between neighboring CHs. CH needs to be reselected in such cases. However, frequent re-selection of CHs results in counter effect on routing and reconfiguration of resource allocation associated with CH-dependent protocols. In addition, the link quality between a CH-CH and CH-BS are very often affected by various dynamic environmental factors such as heat and humidity, obstacles and RF interferences. Since CH aggregates the traffic from all cluster members, failure of the CH means that the full cluster will fail. Many solutions have been proposed to combat with error prone wireless channel such as automatic repeat request (ARQ) and multipath routing. Though the above mentioned techniques improve the communication reliability but intervene the communication efficiency. In the former scheme, the transmitter retransmits the whole packet even though the part of the packet has been received correctly and in the later one, the receiver may receive the same information from multiple paths; thus both techniques are bandwidth and energy inefficient. In addition, with retransmission, overall end to end delay may exceed the maximum allowable delay budget. Based on the aforementioned observations, we identify CH-to-CH channel is one of the bottlenecks to provide reliable communication in cluster based multihop M2M network and present a full solution to support fountain coded cooperative communications. Our solution covers many aspects from relay selection to cooperative formation to meet the user’s QoS requirements. In the first part of the thesis, we first design a rateless-coded-incremental-relay selection (RCIRS) algorithm based on greedy techniques to guarantee the required data rate with a minimum cost. After that, we develop fountain coded cooperative communication protocols to facilitate the data transmission between two neighbor CHs. In the second part, we propose joint network and fountain coding schemes for reliable communication. Through coupling channel coding and network coding simultaneously in the physical layer, joint network and fountain coding schemes efficiently exploit the redundancy of both codes and effectively combat the detrimental effect of fading conditions in wireless channels. In the proposed scheme, after correctly decoding the information from different sources, a relay node applies network and fountain coding on the received signals and then transmits to the destination in a single transmission. Therefore, the proposed schemes exploit the diversity and coding gain to improve the system performance. In the third part, we focus on the reliable uplink transmission between CHs and BS where CHs transmit to BS directly or with the help of the LTE-A relay nodes (RN). We investigate both type-I and type-II enhanced LTE-A networks and propose a set of joint network and fountain coding schemes to enhance the link robustness. Finally, the proposed solutions are evaluated through extensive numerical simulations and the numerical results are presented to provide a comparison with the related works found in the literature

Towards UAV Assisted 5G Public Safety Network

Ensuring ubiquitous mission-critical public safety communications (PSC) to all the first responders in the public safety network is crucial at an emergency site. The first responders heavily rely on mission-critical PSC to save lives, property, and national infrastructure during a natural or human-made emergency. The recent advancements in LTE/LTE-Advanced/5G mobile technologies supported by unmanned aerial vehicles (UAV) have great potential to revolutionize PSC. However, limited spectrum allocation for LTE-based PSC demands improved channel capacity and spectral efficiency. An additional challenge in designing an LTE-based PSC network is achieving at least 95% coverage of the geographical area and human population with broadband rates. The coverage requirement and efficient spectrum use in the PSC network can be realized through the dense deployment of small cells (both terrestrial and aerial). However, there are several challenges with the dense deployment of small cells in an air-ground heterogeneous network (AG-HetNet). The main challenges which are addressed in this research work are integrating UAVs as both aerial user and aerial base-stations, mitigating inter-cell interference, capacity and coverage enhancements, and optimizing deployment locations of aerial base-stations. First, LTE signals were investigated using NS-3 simulation and software-defined radio experiment to gain knowledge on the quality of service experienced by the user equipment (UE). Using this understanding, a two-tier LTE-Advanced AG-HetNet with macro base-stations and unmanned aerial base-stations (UABS) is designed, while considering time-domain inter-cell interference coordination techniques. We maximize the capacity of this AG-HetNet in case of a damaged PSC infrastructure by jointly optimizing the inter-cell interference parameters and UABS locations using a meta-heuristic genetic algorithm (GA) and the brute-force technique. Finally, considering the latest specifications in 3GPP, a more realistic three-tier LTE-Advanced AG-HetNet is proposed with macro base-stations, pico base-stations, and ground UEs as terrestrial nodes and UABS and aerial UEs as aerial nodes. Using meta-heuristic techniques such as GA and elitist harmony search algorithm based on the GA, the critical network elements such as energy efficiency, inter-cell interference parameters, and UABS locations are all jointly optimized to maximize the capacity and coverage of the AG-HetNet

Building upon NB-IoT networks : a roadmap towards 5G new radio networks

Narrowband Internet of Things (NB-IoT) is a type of low-power wide-area (LPWA) technology standardized by the 3rd-Generation Partnership Project (3GPP) and based on long-term evolution (LTE) functionalities. NB-IoT has attracted significant interest from the research community due to its support for massive machine-type communication (mMTC) and various IoT use cases that have stringent specifications in terms of connectivity, energy efficiency, reachability, reliability, and latency. However, as the capacity requirements for different IoT use cases continue to grow, the various functionalities of the LTE evolved packet core (EPC) system may become overladen and inevitably suboptimal. Several research efforts are ongoing to meet these challenges; consequently, we present an overview of these efforts, mainly focusing on the Open System Interconnection (OSI) layer of the NB-IoT framework. We present an optimized architecture of the LTE EPC functionalities, as well as further discussion about the 3GPP NB-IoT standardization and its releases. Furthermore, the possible 5G architectural design for NB-IoT integration, the enabling technologies required for 5G NB-IoT, the 5G NR coexistence with NB-IoT, and the potential architectural deployment schemes of NB-IoT with cellular networks are introduced. In this article, a description of cloud-assisted relay with backscatter communication, a comprehensive review of the technical performance properties and channel communication characteristics from the perspective of the physical (PHY) and medium-access control (MAC) layer of NB-IoT, with a focus on 5G, are presented. The different limitations associated with simulating these systems are also discussed. The enabling market for NB-IoT, the benefits for a few use cases, and possible critical challenges related to their deployment are also included. Finally, present challenges and open research directions on the PHY and MAC properties, as well as the strengths, weaknesses, opportunities, and threats (SWOT) analysis of NB-IoT, are presented to foster the prospective research activities.http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=6287639pm2021Electrical, Electronic and Computer Engineerin

Single-Frequency Network Terrestrial Broadcasting with 5GNR Numerology

L'abstract è presente nell'allegato / the abstract is in the attachmen

Self organization in 3GPP long term evolution networks

Mobiele en breedbandige internettoegang is realiteit. De internetgeneratie vindt het immers normaal om overal breedbandige internettoegang te hebben. Vandaag zijn er al 5,9 miljard mobiele abonnees ( 87% van de wereldbevolking) en 20% daarvan hebben toegang tot een mobiele breedbandige internetverbinding. Dit wordt aangeboden door 3G (derde generatie) technologieën zoals HSPA (High Speed Packet Access) en 4G (vierde generatie) technologieën zoals LTE (Long Term Evolution). De vraag naar hoogkwalitatieve diensten stelt de mobiele netwerkoperatoren en de verkopers van telecommunicatieapparatuur voor nieuwe uitdagingen: zij moeten nieuwe oplossingen vinden om hun diensten steeds sneller en met een hogere kwaliteit aan te bieden. De nieuwe LTE-standaard brengt niet alleen hogere pieksnelheden en kleinere vertragingen. Het heeft daarnaast ook nieuwe functionaliteiten in petto die zeer aantrekkelijk zijn voor de mobiele netwerkoperator: de integratie van zelfregelende functies die kunnen ingezet worden bij de planning van het netwerk, het uitrollen van een netwerk en het controleren van allerhande netwerkmechanismen (o.a. handover, spreiding van de belasting over de cellen). Dit proefschrift optimaliseert enkele van deze zelfregelende functies waardoor de optimalisatie van een mobiel netwerk snel en automatisch kan gebeuren. Hierdoor verwacht men lagere kosten voor de mobiele operator en een hogere kwaliteit van de aangeboden diensten