Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Memory controller for vector processor

To manage power and memory wall affects, the HPC industry supports FPGA reconfigurable accelerators and vector processing cores for data-intensive scientific applications. FPGA based vector accelerators are used to increase the performance of high-performance application kernels. Adding more vector lanes does not affect the performance, if the processor/memory performance gap dominates. In addition if on/off-chip communication time becomes more critical than computation time, causes performance degradation. The system generates multiple delays due to application’s irregular data arrangement and complex scheduling scheme. Therefore, just like generic scalar processors, all sets of vector machine – vector supercomputers to vector microprocessors – are required to have data management and access units that improve the on/off-chip bandwidth and hide main memory latency. In this work, we propose an Advanced Programmable Vector Memory Controller (PVMC), which boosts noncontiguous vector data accesses by integrating descriptors of memory patterns, a specialized on-chip memory, a memory manager in hardware, and multiple DRAM controllers. We implemented and validated the proposed system on an Altera DE4 FPGA board. The PVMC is also integrated with ARM Cortex-A9 processor on Xilinx Zynq All-Programmable System on Chip architecture. We compare the performance of a system with vector and scalar processors without PVMC. When compared with a baseline vector system, the results show that the PVMC system transfers data sets up to 1.40x to 2.12x faster, achieves between 2.01x to 4.53x of speedup for 10 applications and consumes 2.56 to 4.04 times less energy.Peer ReviewedPostprint (author's final draft

Carbon nanotubes as interconnect for next generation network on chip

Multi-core processors provide better performance when compared with their single-core equivalent. Recently, Networks-on-Chip (NoC) have emerged as a communication methodology for multi core chips. Network-on-Chip uses packet based communication for establishing a communication path between multiple cores connected via interconnects. Clock frequency, energy consumption and chip size are largely determined by these interconnects. According to the International Technology Roadmap for Semiconductors (ITRS), in the next five years up to 80% of microprocessor power will be consumed by interconnects. In the sub 100nm scaling range, interconnect behavior limits the performance and correctness of VLSI systems. The performance of copper interconnects tend to get reduced in the sub 100nm range and hence we need to examine other interconnect options. Single Wall Carbon Nanotubes exhibit better performance in sub 100nm processing technology due to their very large current carrying capacity and large electron mean free paths. This work suggests using Single Wall Carbon Nanotubes (SWCNT) as interconnects for Networks-on-Chip as they consume less energy and gives more throughput and bandwidth when compared with traditional Copper wires

A Field Programmable Gate Array Architecture for Two-Dimensional Partial Reconfiguration

Reconfigurable machines can accelerate many applications by adapting to their needs through hardware reconfiguration. Partial reconfiguration allows the reconfiguration of a portion of a chip while the rest of the chip is busy working on tasks. Operating system models have been proposed for partially reconfigurable machines to handle the scheduling and placement of tasks. They are called OS4RC in this dissertation. The main goal of this research is to address some problems that come from the gap between OS4RC and existing chip architectures and the gap between OS4RC models and practical applications. Some existing OS4RC models are based on an impractical assumption that there is no data exchange channel between IP (Intellectual Property) circuits residing on a Field Programmable Gate Array (FPGA) chip and between an IP circuit and FPGA I/O pins. For models that do not have such an assumption, their inter-IP communication channels have severe drawbacks. Those channels do not work well with 2-D partial reconfiguration. They are not suitable for intensive data stream processing. And frequently they are very complicated to design and very expensive. To address these problems, a new chip architecture that can better support inter-IP and IP-I/O communication is proposed and a corresponding OS4RC kernel is then specified. The proposed FPGA architecture is based on an array of clusters of configurable logic blocks, with each cluster serving as a partial reconfiguration unit, and a mesh of segmented buses that provides inter-IP and IP-I/O communication channels. The proposed OS4RC kernel takes care of the scheduling, placement, and routing of circuits under the constraints of the proposed architecture. Features of the new architecture in turns reduce the kernel execution times and enable the runtime scheduling, placement and routing. The area cost and the configuration memory size of the new chip architecture are calculated and analyzed. And the efficiency of the OS4RC kernel is evaluated via simulation using three different task models

An Efficient and Low Density Crossbar Switch Design for NoC

Code Division Multiple Access (CDMA) is a sort of multiplexing that facilitates various signals to occupy a single transmission channel. In this medium, sharing is enabled in the code space by assigning a limited number of N-chip length orthogonal spreading codes to the processing elements sharing interconnect. Serial and parallel overloaded CDMA interconnect (OCI) architecture variants are presented to adhere to different area, delay, and power requirements. Compared with the conventional CDMA crossbar, on a  Xilinx  Artix-7  AC701  FPGA  kit,  the  serial  OCI crossbar achieves 100% higher bandwidth, 31% less resource utilization, and 45% power saving, while the parallel OCI crossbar achieves N times higher  bandwidth  compared with the serial OCI crossbar at the expense of increased area  and power consumption. A 65-node OCI-based star NoC is implemented, evaluated, and compared with an equivalent space division multiple access based torus NoC for various synthetic traffic patterns. The evaluation results in terms of the resource utilization and throughput highlight the OCI as a promising technology to implement the physical layer of NoC routers

EMVS: Embedded Multi Vector-core System

With the increase in the density and performance of digital electronics, the demand for a power-efficient high-performance computing (HPC) system has been increased for embedded applications. The existing embedded HPC systems suffer from issues like programmability, scalability, and portability. Therefore, a parameterizable and programmable high-performance processor system architecture is required to execute the embedded HPC applications. In this work, we proposed an Embedded Multi Vector-core System (EMVS) which executes the embedded application by managing the multiple vectorized tasks and their memory operations. The system is designed and ported on an Altera DE4 FPGA development board. The performance of EMVS is compared with the Heterogeneous Multi-Processing Odroid XU3, Parallela and GPU Jetson TK1 embedded systems. In contrast to the embedded systems, the results show that EMVS improves 19.28 and 10.22 times of the application and system performance respectively and consumes 10.6 times less energy.Peer ReviewedPostprint (author's final draft

Electronic and photonic switching in the atm era

Broadband networks require high-capacity switches in order to properly manage large amounts of traffic fluxes. Electronic and photonic technologies are being used to achieve this objective both allowing different multiplexing and switching techniques. Focusing on the asynchronous transfer mode (ATM), the inherent different characteristics of electronics and photonics makes different architectures feasible. In this paper, different switching structures are described, several ATM switching architectures which have been recently implemented are presented and the implementation characteristics discussed. Three diverse points of view are given from the electronic research, the photonic research and the commercial switches. Although all the architectures where successfully tested, they should also follow different market requirements in order to be commercialised. The characteristics are presented and the architectures projected over them to evaluate their commercial capabilities.Peer ReviewedPostprint (published version

Low-swing signaling for energy efficient on-chip networks

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.Cataloged from PDF version of thesis.Includes bibliographical references (p. 65-69).On-chip networks have emerged as a scalable and high-bandwidth communication fabric in many-core processor chips. However, the energy consumption of these networks is becoming comparable to that of computation cores, making further scaling of core counts difficult. This thesis makes several contributions to low-swing signaling circuit design for the energy efficient on-chip networks in two separate projects: on-chip networks optimized for one-to-many multicasts and broadcasts, and link designs that allow on-chip networks to approach an ideal interconnection fabric. A low-swing crossbar switch, which is based on tri-state Reduced-Swing Drivers (RSDs), is presented for the first project. Measurement results of its test chip fabricated in 45nm SOI CMOS show that the tri-state RSD-based crossbar enables 55% power savings as compared to an equivalent full-swing crossbar and link. Also, the measurement results show that the proposed crossbar allows the broadcast-optimized on-chip networks using a single pipeline stage for physical data transmission to operate at 21% higher data rate, when compared with the full-swing networks. For the second project, two clockless low-swing repeaters, a Self-Resetting Logic Repeater (SRLR) and a Voltage-Locked Repeater (VLR), have been proposed and analyzed in simulation only. They both require no reference clock, differential signaling, and bias current. Such digital-intensive properties enable them to approach energy and delay performance of a point-to-point interconnect of variable lengths. Simulated in 45nm SOI CMOS, the 10mm SRLR featured with high energy efficiency consumes 338fJ/b at 5.4Gb/s/ch while the 10mm VLR raises its data rate up to 16.OGb/s/ch with 427fJ/b.by Sunghyun Park.S.M

SWIFT: A Low-Power Network-On-Chip Implementing the Token Flow Control Router Architecture With Swing-Reduced Interconnects

A 64-bit, 8 × 8 mesh network-on-chip (NoC) is presented that uses both new architectural and circuit design techniques to improve on-chip network energy-efficiency, latency, and throughput. First, we propose token flow control, which enables bypassing of flit buffering in routers, thereby reducing buffer size and their power consumption. We also incorporate reduced-swing signaling in on-chip links and crossbars to minimize datapath interconnect energy. The 64-node NoC is experimentally validated with a 2 × 2 test chip in 90 nm, 1.2 V CMOS that incorporates traffic generators to emulate the traffic of the full network. Compared with a fully synthesized baseline 8 × 8 NoC architecture designed to meet the same peak throughput, the fabricated prototype reduces network latency by 20% under uniform random traffic, when both networks are run at their maximum operating frequencies. When operated at the same frequencies, the SWIFT NoC reduces network power by 38% and 25% at saturation and low loads, respectively