Contribution à la conception d'un système de radio impulsionnelle ultra large bande intelligent

Faced with an ever increasing demand of high data-rates and improved adaptability among existing systems, which inturn is resulting in spectrum scarcity, the development of new radio solutions becomes mandatory in order to answer the requirements of these emergent applications. Among the recent innovations in the field of wireless communications,ultra wideband (UWB) has generated significant interest. Impulse based UWB (IR-UWB) is one attractive way of realizing UWB systems, which is characterized by the transmission of sub nanoseconds UWB pulses, occupying a band width up to 7.5 GHz with extremely low power density. This large band width results in several captivating features such as low-complexity low-cost transceiver, ability to overlay existing narrowband systems, ample multipath diversity, and precise ranging at centimeter level due to extremely fine temporal resolution.In this PhD dissertation, we investigate some of the key elements in the realization of an intelligent time-hopping based IR-UWB system. Due to striking resemblance of IR-UWB inherent features with cognitive radio (CR) requirements, acognitive UWB based system is first studied. A CR in its simplest form can be described as a radio, which is aware ofits surroundings and adapts intelligently. As sensing the environment for the availability of resources and then consequently adapting radio’s internal parameters to exploit them opportunistically constitute the major blocks of any CR, we first focus on robust spectrum sensing algorithms and the design of adaptive UWB waveforms for realizing a cognitive UWB radio. The spectrum sensing module needs to function with minimum a-priori knowledge available about the operating characteristics and detect the primary users as quickly as possible. Keeping this in mind, we develop several spectrum sensing algorithms invoking recent results on the random matrix theory, which can provide efficient performance with a few number of samples. Next, we design the UWB waveform using a linear combination of Bsp lines with weight coefficients being optimized by genetic algorithms. This results in a UWB waveform that is spectrally efficient and at the same time adaptable to incorporate the cognitive radio requirements. In the 2nd part of this thesis, some research challenges related to signal processing in UWB systems, namely synchronization and dense multipath channel estimation are addressed. Several low-complexity non-data-aided (NDA) synchronization algorithms are proposed for BPSK and PSM modulations, exploiting either the orthogonality of UWB waveforms or theinherent cyclostationarity of IR-UWB signaling. Finally, we look into the channel estimation problem in UWB, whichis very demanding due to particular nature of UWB channels and at the same time very critical for the coherent Rake receivers. A method based on a joint maximum-likelihood (ML) and orthogonal subspace (OS) approaches is proposed which exhibits improved performance than both of these methods individually.Face à une demande sans cesse croissante de haut débit et d’adaptabilité des systèmes existants, qui à son tour se traduit par l’encombrement du spectre, le développement de nouvelles solutions dans le domaine des communications sans fil devient nécessaire afin de répondre aux exigences des applications émergentes. Parmi les innovations récentes dans ce domaine, l’ultra large bande (UWB) a suscité un vif intérêt. La radio impulsionnelle UWB (IR-UWB), qui est une solution intéressante pour réaliser des systèmes UWB, est caractérisée par la transmission des impulsions de très courte durée, occupant une largeur de bande allant jusqu’à 7,5 GHz, avec une densité spectrale de puissance extrêmement faible. Cette largeur de bande importante permet de réaliser plusieurs fonctionnalités intéressantes, telles que l’implémentation à faible complexité et à coût réduit, la possibilité de se superposer aux systèmes à bande étroite, la diversité spatiale et la localisation très précise de l’ordre centimétrique, en raison de la résolution temporelle très fine.Dans cette thèse, nous examinons certains éléments clés dans la réalisation d'un système IR-UWB intelligent. Nous avons tout d’abord proposé le concept de radio UWB cognitive à partir des similarités existantes entre l'IR-UWB et la radio cognitive. Dans sa définition la plus simple, un tel système est conscient de son environnement et s'y adapte intelligemment. Ainsi, nous avons tout d’abord focalisé notre recherché sur l’analyse de la disponibilité des ressources spectrales (spectrum sensing) et la conception d’une forme d’onde UWB adaptative, considérées comme deux étapes importantes dans la réalisation d'une radio cognitive UWB. Les algorithmes de spectrum sensing devraient fonctionner avec un minimum de connaissances a priori et détecter rapidement les utilisateurs primaires. Nous avons donc développé de tels algorithmes utilisant des résultats récents sur la théorie des matrices aléatoires, qui sont capables de fournir de bonnes performances, avec un petit nombre d'échantillons. Ensuite, nous avons proposé une méthode de conception de la forme d'onde UWB, vue comme une superposition de fonctions B-splines, dont les coefficients de pondération sont optimisés par des algorithmes génétiques. Il en résulte une forme d'onde UWB qui est spectralement efficace et peut s’adapter pour intégrer les contraintes liées à la radio cognitive. Dans la 2ème partie de cette thèse, nous nous sommes attaqués à deux autres problématiques importantes pour le fonctionnement des systèmes UWB, à savoir la synchronisation et l’estimation du canal UWB, qui est très dense en trajets multiples. Ainsi, nous avons proposé plusieurs algorithmes de synchronisation, de faible complexité et sans séquence d’apprentissage, pour les modulations BPSK et PSM, en exploitant l'orthogonalité des formes d'onde UWB ou la cyclostationnarité inhérente à la signalisation IR-UWB. Enfin, nous avons travaillé sur l'estimation du canal UWB, qui est un élément critique pour les récepteurs Rake cohérents. Ainsi, nous avons proposé une méthode d’estimation du canal basée sur une combinaison de deux approches complémentaires, le maximum de vraisemblance et la décomposition en sous-espaces orthogonaux,d’améliorer globalement les performances

Interference mitigation and awareness for improved reliability

Wireless systems are commonly affected by interference from various sources. For example, a number of users that operate in the same wireless network can result in multiple-access interference (MAI). In addition, for ultrawideband (UWB) systems, which operate at very low power spectral densities, strong narrowband interference (NBI) can have significant effects on the communications reliability. Therefore, interference mitigation and awareness are crucial in order to realize reliable communications systems. In this chapter, pulse-based UWB systems are considered, and the mitigation of MAI is investigated first. Then, NBI avoidance and cancelation are studied for UWB systems. Finally, interference awareness is discussed for short-rate communications, next-generation wireless networks, and cognitive radios.Mitigation of multiple-access interference (MAI)In an impulse radio ultrawideband (IR-UWB) communications system, pulses with very short durations, commonly less than one nanosecond, are transmitted with a low-duty cycle, and information is carried by the positions or the polarities of pulses [1-5]. Each pulse resides in an interval called frame, and the positions of pulses within frames are determined according to time-hopping (TH) sequences specific to each user. The low-duty cycle structure together with TH sequences provide a multiple-access capability for IR-UWB systems [6].Although IR-UWB systems can theoretically accommodate a large number of users in a multiple-access environment [2, 4], advanced signal processing techniques are necessary in practice in order to mitigate the effects of interfering users on the detection of information symbols efficiently [6]. © Cambridge University Press 2011

Design of static intercell interference coordination schemes for realistic lte-based cellular networks

Today, 3.5 and 4G systems including Long Term Evolution (LTE) and LTE-Advanced (LTE-A) support packet-based services and provide mobile broadband access for bandwidth-hungry applications. In this context of fast evolution, new and challenging technical issues must be e ectively addressed. The nal target is to achieve a signi cant step forward toward the improvement of the Quality of Experience (QoE). To that end, interference management has been recognized by the industry as a key enabler for cellular technologies based on OFDMA. Indeed, with a low frequency reuse factor, intercell interference (ICI) becomes a major concern since the Quality of Service (QoS) is not uniformly delivered across the network, it remarkably depends on user position. Hence, cell edge performance is an important issue in LTE and LTE-A. Intercell Interference Coordination (ICIC) encompasses strategies whose goal is to keep ICI at cell edges as low as possible. This alleviates the aforementioned situation. For this reason, the novelties presented in this Ph.D. thesis include not only developments of static ICIC mechanisms for data and control channels, but also e orts towards further improvements of the energy e ciency perspective. Based on a comprehensive review of the state of the art, a set of research opportunities were identi ed. To be precise, the need for exible performance evaluation methods and optimization frameworks for static ICIC strategies. These mechanisms are grouped in two families: the schemes that de ne constraints on the frequency domain and the ones that propose adjustments on the power levels. Thus, Soft- and Fractional Frequency Reuse (SFR and FFR, respectively) are identi ed as the base of the vast majority of static ICIC proposals. Consequently, during the rst part of this Ph.D. thesis, interesting insights into the operation of SFR and FFR were identi ed beyond well-known facts. These studies allow for the development of a novel statistical framework to evaluate the performance of these schemes in realistic deployments. As a result of the analysis, the poor performance of classic con gurations of SFR and FFR in real-world contexts is shown, and hence, the need for optimization is established. In addition, the importance of the interworking between static ICIC schemes and other network functionalities such as CSI feedback has also been identi ed. Therefore, novel CSI feedback schemes, suitable to operate in conjunction with SFR and FFR, have been developed. These mechanisms exploit the resource allocation pattern of these static ICIC techniques in order to improve the accuracy of the CSI feedback process. The second part is focused on the optimization of SFR and FFR. The use of multiobjective techniques is investigated as a tool to achieve e ective network-speci c optimization. The approach o ers interesting advantages. On the one hand, it allows for simultaneous optimization of several con icting criteria. On the other hand, the multiobjective nature results in outputs composed of several high quality (Pareto e cient) network con gurations, all of them featuring a near-optimal tradeo between the performance criteria. Multiobjective evolutionary algorithms allow employing complex mathematical structures without the need for relaxation, thus capturing accurately the system behavior in terms of ICI. The multiobjective optimization formulation of the problem aims at achieving e ective adjustment of the operational parameters of SFR and FFR both at cell level and network-wide. Moreover, the research was successfully extended to the control channels, both the PDCCH and ePDCCH. Finally, in an e ort to further improve the network energy e ciency (an aspect always considered throughout the thesis), the framework of Cell Switch O (CSO), having close connections with ICIC, is also introduced. By means of the proposed method, signi cant improvements with respect to traditional approaches, baseline con gurations, and previous proposals can be achieved. The gains are obtained in terms of energy consumption, network capacity, and cell edge performance.Actualmente los sistemas 3.5 y 4G tales como Long Term Evolution (LTE) y LTE-Advanced (LTE-A) soportan servicios basados en paquetes y proporcionan acceso de banda ancha m ovil para aplicaciones que requieren elevadas tasas de transmisi on. En este contexto de r apida evoluci on, aparecen nuevos retos t ecnicos que deben ser resueltos e cientemente. El objetivo ultimo es conseguir un salto cualitativo importante en la experiencia de usuario (QoE). Con tal n, un factor clave que ha sido reconocido en las redes celulares basadas en Orthogonal Frequency- Division Multiple Access (OFDMA) es la gesti on de interferencias. De hecho, la utilizaci on de un factor de reuso bajo permite una elevada e ciencia espectral pero a costa de una distribuci on de la calidad de servicio (QoS) que no es uniforme en la red, depende de la posici on del usuario. Por lo tanto, el rendimiento en los l mites de la celda se ve muy penalizado y es un problema importante a resolver en LTE y LTE-A. La coordinaci on de interferencias entre celdas (ICIC, del ingl es Intercell Interfe- rence Coordination) engloba las estrategias cuyo objetivo es mantener la interferencia intercelular (ICI) lo m as baja posible en los bordes de celda. Esto permite aliviar la situaci on antes mencionada. La contribuci on presentada en esta tesis doctoral incluye el dise~no de nuevos mecanismos de ICIC est atica para los canales de datos y control, as como tambi en mejoras desde el punto de vista de e ciencia energ etica. A partir de una revisi on completa del estado del arte, se identi caron una serie de retos abiertos que requer an esfuerzos de investigaci on. En concreto, la necesidad de m etodos de evaluaci on exibles y marcos de optimizaci on de las estrategias de ICIC est aticas. Estos mecanismos se agrupan en dos familias: los esquemas que de nen restricciones sobre el dominio de la frecuencia y los que proponen ajustes en los niveles de potencia. Es decir, la base de la gran mayor a de propuestas ICIC est aticas son la reutilizaci on de frecuencias de tipo soft y fraccional (SFR y FFR, respectivamente). De este modo, durante la primera parte de esta tesis doctoral, se han estudiado los aspectos m as importantes del funcionamiento de SFR y FFR, haciendo especial enfasis en las conclusiones que van m as all a de las bien conocidas. Ello ha permitido introducir un nuevo marco estad stico para evaluar el funcionamiento de estos sistemas en condiciones de despliegue reales. Como resultado de estos an alisis, se muestra el pobre desempe~no de SFR y FFR en despliegues reales cuando funcionan con sus con guraciones cl asicas y se establece la necesidad de optimizaci on. Tambi en se pone de mani esto la importancia del funcionamiento conjunto entre esquemas ICIC est aticos y otras funcionalidades de la red radio, tales como la informaci on que env an los usuarios sobre el estado de su canal downlink (feedback del CSI, del ingl es Channel State Information). De este modo, se han propuesto diferentes esquemas de feedback apropiados para trabajar conjuntamente con SFR y FFR. Estos mecanismos explotan el patr on de asignaci on de recursos que se utiliza en ICIC est atico para mejorar la precisi on del proceso. La segunda parte se centra en la optimizaci on de SFR y FFR. Se ha investigado el uso de t ecnicas multiobjetivo como herramienta para lograr una optimizaci on e caz, que es espec ca para cada red. El enfoque ofrece ventajas interesantes, por un lado, se permite la optimizaci on simult anea de varios criterios contradictorios. Por otro lado, la naturaleza multiobjetivo implica obtener como resultado con guraciones de red de elevada calidad (Pareto e cientes), todas ellas con un equilibrio casi- optimo entre las diferentes m etricas de rendimiento. Los algoritmos evolucionarios multiobjetivo permiten la utilizaci on de estructuras matem aticas complejas sin necesidad de relajar el problema, de este modo capturan adecuadamente su comportamiento en t erminos de ICI. La formulaci on multiobjetivo consigue un ajuste efectivo de los par ametros operacionales de SFR y FFR, tanto a nivel de celda como a nivel de red. Adem as, la investigaci on se extiende con resultados satisfactorios a los canales de control, PDCCH y ePDCCH. Finalmente, en un esfuerzo por mejorar la e ciencia energ etica de la red (un aspecto siempre considerado a lo largo de la tesis), se introduce en el an alisis global el apagado inteligente de celdas, estrategia con estrechos v nculos con ICIC. A trav es del m etodo propuesto, se obtienen mejoras signi cativas con respecto a los enfoques tradicionales y propuestas previas. Las ganancias se obtienen en t erminos de consumo energ etico, capacidad de la red, y rendimiento en el l mite de las celdas.Actualment els sistemes 3.5 i 4G tals com Long Term Evolution (LTE) i LTE- Advanced (LTE-A) suporten serveis basats en paquets i proporcionen acc es de banda ampla m obil per a aplicacions que requereixen elevades taxes de transmissi o. En aquest context de r apida evoluci o, apareixen nous reptes t ecnics que han de ser resolts e cientment. L'objectiu ultim es aconseguir un salt qualitatiu important en l'experi encia d'usuari (QoE). Amb tal , un factor clau que ha estat reconegut a les xarxes cel lulars basades en Orthogonal Frequency-Division Multiple Access (OFDMA) es la gesti o d'interfer encies. De fet, la utilizaci o d'un factor de re us baix permet una elevada e ci encia espectral per o a costa d'una distribuci o de la qualitat de servei (QoS) que no es uniforme a la xarxa, dep en de la posici o de l'usuari. Per tant, el rendiment en els l mits de la cel la es veu molt penalitzat i es un problema important a resoldre en LTE i LTE-A. La coordinaci o d'interfer encies entre cel les (ICIC, de l'angl es Intercell Interfe- rence Coordination) engloba les estrat egies que tenen com a objectiu mantenir la interfer encia intercel lular (ICI) el m es baixa possible en les vores de la cel la. Aix o permet alleujar la situaci o abans esmentada. La contribuci o presentada en aquesta tesi doctoral inclou el disseny de nous mecanismes de ICIC est atica per als canals de dades i control, aix com tamb e millores des del punt de vista d'e ci encia energ etica. A partir d'una revisi o completa de l'estat de l'art, es van identi car una s erie de reptes oberts que requerien esfor cos de recerca. En concret, la necessitat de m etodes d'avaluaci o exibles i marcs d'optimitzaci o de les estrat egies de ICIC est atiques. Aquests mecanismes s'agrupen en dues fam lies: els esquemes que de neixen restriccions sobre el domini de la freq u encia i els que proposen ajustos en els nivells de pot encia. Es a dir, la base de la gran majoria de propostes ICIC est atiques s on la reutilitzaci o de freq u encies de tipus soft i fraccional (SFR i FFR, respectivament). D'aquesta manera, durant la primera part d'aquesta tesi doctoral, s'han estudiat els aspectes m es importants del funcionament de SFR i FFR, fent especial emfasi en les conclusions que van m es enll a de les ben conegudes. Aix o ha perm es introduir un nou marc estad stic per avaluar el funcionament d'aquests sistemes en condicions de desplegament reals. Com a resultat d'aquestes an alisis, es mostra el pobre acompliment de SFR i FFR en desplegaments reals quan funcionen amb les seves con guracions cl assiques i s'estableix la necessitat d'optimitzaci o. Tamb e es posa de manifest la import ancia del funcionament conjunt entre esquemes ICIC est atics i altres funcionalitats de la xarxa radio, tals com la informaci o que envien els usuaris sobre l'estat del seu canal downlink (feedback del CSI, de l'angl es Channel State Information). D'aquesta manera, s'han proposat diferents esquemes de feedback apropiats per treballar conjuntament amb SFR i FFR. Aquests mecanismes exploten el patr o d'assignaci o de recursos que s'utilitza en ICIC est atic per millorar la precisi o del proc es. La segona part se centra en l'optimitzaci o de SFR i FFR. S'ha investigat l' us de t ecniques multiobjectiu com a eina per aconseguir una optimitzaci o e ca c, que es espec ca per a cada xarxa. L'enfocament ofereix avantatges interessants, d'una banda, es permet l'optimitzaci o simult ania de diversos criteris contradictoris. D'altra banda, la naturalesa multiobjectiu implica obtenir com resultat con guracions de xarxa d'elevada qualitat (Pareto e cients), totes elles amb un equilibri gaireb e optim entre les diferents m etriques de rendiment. Els algorismes evolucionaris multiobjectiu permeten la utilitzaci o d'estructures matem atiques complexes sense necessitat de relaxar el problema, d'aquesta manera capturen adequadament el seu comportament en termes de ICI. La formulaci o multiobjectiu aconsegueix un ajust efectiu dels par ametres operacionals de SFR i FFR, tant a nivell de cel la com a nivell de xarxa. A m es, la recerca s'est en amb resultats satisfactoris als canals de control, PDCCH i ePDCCH. Finalment, en un esfor c per millorar l'e ci encia energ etica de la xarxa (un aspecte sempre considerat al llarg de la tesi), s'introdueix en l'an alisi global l'apagat intel ligent de cel les, estrat egia amb estrets vincles amb ICIC. Mitjan cant el m etode proposat, s'obtenen millores signi catives pel que fa als enfocaments tradicionals i propostes pr evies. Els guanys s'obtenen en termes de consum energ etic, capacitat de la xarxa, i rendiment en el l mit de les cel les

Analog‐to‐Digital Conversion for Cognitive Radio: Subsampling, Interleaving, and Compressive Sensing

This chapter explores different analog-to-digital conversion techniques that are suitable to be implemented in cognitive radio receivers. This chapter details the fundamentals, advantages, and drawbacks of three promising techniques: subsampling, interleaving, and compressive sensing. Due to their major maturity, subsampling- and interleaving-based systems are described in further detail, whereas compressive sensing-based systems are described as a complement of the previous techniques for underutilized spectrum applications. The feasibility of these techniques as part of software-defined radio, multistandard, and spectrum sensing receivers is demonstrated by proposing different architectures with reduced complexity at circuit level, depending on the application requirements. Additionally, the chapter proposes different solutions to integrate the advantages of these techniques in a unique analog-to-digital conversion process

Efficient complementary sequences-based architectures and their application to ranging measurements

Premio Extraordinario de Doctorado de la UAH en 2015En las últimas décadas, los sistemas de medición de distancias se han beneficiado de los avances en el área de las comunicaciones inalámbricas. En los sistemas basados en CDMA (Code-Division Multiple-Access), las propiedades de correlación de las secuencias empleadas juegan un papel fundamental en el desarrollo de dispositivos de medición de altas prestaciones. Debido a las sumas ideales de correlaciones aperiódicas, los conjuntos de secuencias complementarias, CSS (Complementary Sets of Sequences), son ampliamente utilizados en sistemas CDMA. En ellos, es deseable el uso de arquitecturas eficientes que permitan generar y correlar CSS del mayor número de secuencias y longitudes posibles. Por el término eficiente se hace referencia a aquellas arquitecturas que requieren menos operaciones por muestra de entrada que con una arquitectura directa. Esta tesis contribuye al desarrollo de arquitecturas eficientes de generación/correlación de CSS y derivadas, como son las secuencias LS (Loosely Synchronized) y GPC (Generalized Pairwise Complementary), que permitan aumentar el número de longitudes y/o de secuencias disponibles. Las contribuciones de la tesis pueden dividirse en dos bloques: En primer lugar, las arquitecturas eficientes de generación/correlación para CSS binarios, derivadas en trabajos previos, son generalizadas al alfabeto multinivel (secuencias con valores reales) mediante el uso de matrices de Hadamard multinivel. Este planteamiento tiene dos ventajas: por un lado el aumento del número de longitudes que pueden generarse/correlarse y la eliminación de las limitaciones de las arquitecturas previas en el número de secuencias en el conjunto. Por otro lado, bajo ciertas condiciones, los parámetros de las arquitecturas generalizadas pueden ajustarse para generar/correlar eficientemente CSS binarios de mayor número de longitudes que con las arquitecturas eficientes previas. En segundo lugar, las arquitecturas propuestas son usadas para el desarrollo de nuevos algoritmos de generación/correlación de secuencias derivadas de CSS que reducen el número de operaciones por muestra de entrada. Finalmente, se presenta la aplicación de las secuencias estudiadas en un nuevo sistema de posicionamiento local basado en Ultra-Wideband y en un sistema de posicionamiento local basado en ultrasonidos

Peak to average power ratio reduction and error control in MIMO-OFDM HARQ System

Currently, multiple-input multiple-output orthogonal frequency division multiplexing (MIMOOFDM) systems underlie crucial wireless communication systems such as commercial 4G and 5G networks, tactical communication, and interoperable Public Safety communications. However, one drawback arising from OFDM modulation is its resulting high peak-to-average power ratio (PAPR). This problem increases with an increase in the number of transmit antennas. In this work, a new hybrid PAPR reduction technique is proposed for space-time block coding (STBC) MIMO-OFDM systems that combine the coding capabilities to PAPR reduction methods, while leveraging the new degree of freedom provided by the presence of multiple transmit chairs (MIMO). In the first part, we presented an extensive literature review of PAPR reduction techniques for OFDM and MIMO-OFDM systems. The work developed a PAPR reduction technique taxonomy, and analyzed the motivations for reducing the PAPR in current communication systems, emphasizing two important motivations such as power savings and coverage gain. In the tax onomy presented here, we include a new category, namely, hybrid techniques. Additionally, we drew a conclusion regarding the importance of hybrid PAPR reduction techniques. In the second part, we studied the effect of forward error correction (FEC) codes on the PAPR for the coded OFDM (COFDM) system. We simulated and compared the CCDF of the PAPR and its relationship with the autocorrelation of the COFDM signal before the inverse fast Fourier transform (IFFT) block. This allows to conclude on the main characteristics of the codes that generate high peaks in the COFDM signal, and therefore, the optimal parameters in order to reduce PAPR. We emphasize our study in FEC codes as linear block codes, and convolutional codes. Finally, we proposed a new hybrid PAPR reduction technique for an STBC MIMO-OFDM system, in which the convolutional code is optimized to avoid PAPR degradation, which also combines successive suboptimal cross-antenna rotation and inversion (SS-CARI) and iterative modified companding and filtering schemes. The new method permits to obtain a significant net gain for the system, i.e., considerable PAPR reduction, bit error rate (BER) gain as compared to the basic MIMO-OFDM system, low complexity, and reduced spectral splatter. The new hybrid technique was extensively evaluated by simulation, and the complementary cumulative distribution function (CCDF), the BER, and the power spectral density (PSD) were compared to the original STBC MIMO-OFDM signal

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium