Calibration and Sensitivity Analysis of a Stereo Vision-Based Driver Assistance System

Az http://intechweb.org/ alatti "Books" fül alatt kell rákeresni a "Stereo Vision" címre és az 1. fejezetre

Self-Calibration of Multi-Camera Systems for Vehicle Surround Sensing

Multi-camera systems are being deployed in a variety of vehicles and mobile robots today. To eliminate the need for cost and labor intensive maintenance and calibration, continuous self-calibration is highly desirable. In this book we present such an approach for self-calibration of multi-Camera systems for vehicle surround sensing. In an extensive evaluation we assess our algorithm quantitatively using real-world data

Self-Calibration of Multi-Camera Systems for Vehicle Surround Sensing

Multikamerasysteme werden heute bereits in einer Vielzahl von Fahrzeugen und mobilen Robotern eingesetzt. Die Anwendungen reichen dabei von einfachen Assistenzfunktionen wie der Erzeugung einer virtuellen Rundumsicht bis hin zur Umfelderfassung, wie sie für teil- und vollautomatisches Fahren benötigt wird. Damit aus den Kamerabildern metrische Größen wie Distanzen und Winkel abgeleitet werden können und ein konsistentes Umfeldmodell aufgebaut werden kann, muss das Abbildungsverhalten der einzelnen Kameras sowie deren relative Lage zueinander bekannt sein. Insbesondere die Bestimmung der relativen Lage der Kameras zueinander, die durch die extrinsische Kalibrierung beschrieben wird, ist aufwendig, da sie nur im Gesamtverbund erfolgen kann. Darüber hinaus ist zu erwarten, dass es über die Lebensdauer des Fahrzeugs hinweg zu nicht vernachlässigbaren Veränderungen durch äußere Einflüsse kommt. Um den hohen Zeit- und Kostenaufwand einer regelmäßigen Wartung zu vermeiden, ist ein Selbstkalibrierungsverfahren erforderlich, das die extrinsischen Kalibrierparameter fortlaufend nachschätzt. Für die Selbstkalibrierung wird typischerweise das Vorhandensein überlappender Sichtbereiche ausgenutzt, um die extrinsische Kalibrierung auf der Basis von Bildkorrespondenzen zu schätzen. Falls die Sichtbereiche mehrerer Kameras jedoch nicht überlappen, lassen sich die Kalibrierparameter auch aus den relativen Bewegungen ableiten, die die einzelnen Kameras beobachten. Die Bewegung typischer Straßenfahrzeuge lässt dabei jedoch nicht die Bestimmung aller Kalibrierparameter zu. Um die vollständige Schätzung der Parameter zu ermöglichen, lassen sich weitere Bedingungsgleichungen, die sich z.B. aus der Beobachtung der Bodenebene ergeben, einbinden. In dieser Arbeit wird dazu in einer theoretischen Analyse gezeigt, welche Parameter sich aus der Kombination verschiedener Bedingungsgleichungen eindeutig bestimmen lassen. Um das Umfeld eines Fahrzeugs vollständig erfassen zu können, werden typischerweise Objektive, wie zum Beispiel Fischaugenobjektive, eingesetzt, die einen sehr großen Bildwinkel ermöglichen. In dieser Arbeit wird ein Verfahren zur Bestimmung von Bildkorrespondenzen vorgeschlagen, das die geometrischen Verzerrungen, die sich durch die Verwendung von Fischaugenobjektiven und sich stark ändernden Ansichten ergeben, berücksichtigt. Darauf aufbauend stellen wir ein robustes Verfahren zur Nachführung der Parameter der Bodenebene vor. Basierend auf der theoretischen Analyse der Beobachtbarkeit und den vorgestellten Verfahren stellen wir ein robustes, rekursives Kalibrierverfahren vor, das auf einem erweiterten Kalman-Filter aufbaut. Das vorgestellte Kalibrierverfahren zeichnet sich insbesondere durch die geringe Anzahl von internen Parametern, sowie durch die hohe Flexibilität hinsichtlich der einbezogenen Bedingungsgleichungen aus und basiert einzig auf den Bilddaten des Multikamerasystems. In einer umfangreichen experimentellen Auswertung mit realen Daten vergleichen wir die Ergebnisse der auf unterschiedlichen Bedingungsgleichungen und Bewegungsmodellen basierenden Verfahren mit den aus einer Referenzkalibrierung bestimmten Parametern. Die besten Ergebnisse wurden dabei durch die Kombination aller vorgestellten Bedingungsgleichungen erzielt. Anhand mehrerer Beispiele zeigen wir, dass die erreichte Genauigkeit ausreichend für eine Vielzahl von Anwendungen ist

Semi-automatic 3D reconstruction of urban areas using epipolar geometry and template matching

WOS:000240143800002 (Nº de Acesso Web of Science)In this work we describe a novel technique for semi-automatic three-dimensional (3D) reconstruction of urban areas, from airborne stereo-pair images whose output is VRML or DXF. The main challenge is to compute the relevant information—building's height and volume, roof's description, and texture—algorithmically, because it is very time consuming and thus expensive to produce it manually for large urban areas. The algorithm requires some initial calibration input and is able to compute the above-mentioned building characteristics from the stereo pair and the availability of the 2D CAD and the digital elevation model of the same area, with no knowledge of the camera pose or its intrinsic parameters. To achieve this, we have used epipolar geometry, homography computation, automatic feature extraction and we have solved the feature correspondence problem in the stereo pair, by using template matching

Towards A Self-calibrating Video Camera Network For Content Analysis And Forensics

Due to growing security concerns, video surveillance and monitoring has received an immense attention from both federal agencies and private firms. The main concern is that a single camera, even if allowed to rotate or translate, is not sufficient to cover a large area for video surveillance. A more general solution with wide range of applications is to allow the deployed cameras to have a non-overlapping field of view (FoV) and to, if possible, allow these cameras to move freely in 3D space. This thesis addresses the issue of how cameras in such a network can be calibrated and how the network as a whole can be calibrated, such that each camera as a unit in the network is aware of its orientation with respect to all the other cameras in the network. Different types of cameras might be present in a multiple camera network and novel techniques are presented for efficient calibration of these cameras. Specifically: (i) For a stationary camera, we derive new constraints on the Image of the Absolute Conic (IAC). These new constraints are shown to be intrinsic to IAC; (ii) For a scene where object shadows are cast on a ground plane, we track the shadows on the ground plane cast by at least two unknown stationary points, and utilize the tracked shadow positions to compute the horizon line and hence compute the camera intrinsic and extrinsic parameters; (iii) A novel solution to a scenario where a camera is observing pedestrians is presented. The uniqueness of formulation lies in recognizing two harmonic homologies present in the geometry obtained by observing pedestrians; (iv) For a freely moving camera, a novel practical method is proposed for its self-calibration which even allows it to change its internal parameters by zooming; and (v) due to the increased application of the pan-tilt-zoom (PTZ) cameras, a technique is presented that uses only two images to estimate five camera parameters. For an automatically configurable multi-camera network, having non-overlapping field of view and possibly containing moving cameras, a practical framework is proposed that determines the geometry of such a dynamic camera network. It is shown that only one automatically computed vanishing point and a line lying on any plane orthogonal to the vertical direction is sufficient to infer the geometry of a dynamic network. Our method generalizes previous work which considers restricted camera motions. Using minimal assumptions, we are able to successfully demonstrate promising results on synthetic as well as on real data. Applications to path modeling, GPS coordinate estimation, and configuring mixed-reality environment are explored

Real Time Stereo Cameras System Calibration Tool and Attitude and Pose Computation with Low Cost Cameras

The Engineering in autonomous systems has many strands. The area in which this work falls, the artificial vision, has become one of great interest in multiple contexts and focuses on robotics. This work seeks to address and overcome some real difficulties encountered when developing technologies with artificial vision systems which are, the calibration process and pose computation of robots in real-time. Initially, it aims to perform real-time camera intrinsic (3.2.1) and extrinsic (3.3) stereo camera systems calibration needed to the main goal of this work, the real-time pose (position and orientation) computation of an active coloured target with stereo vision systems. Designed to be intuitive, easy-to-use and able to run under real-time applications, this work was developed for use either with low-cost and easy-to-acquire or more complex and high resolution stereo vision systems in order to compute all the parameters inherent to this same system such as the intrinsic values of each one of the cameras and the extrinsic matrices computation between both cameras. More oriented towards the underwater environments, which are very dynamic and computationally more complex due to its particularities such as light reflections. The available calibration information, whether generated by this tool or loaded configurations from other tools allows, in a simplistic way, to proceed to the calibration of an environment colorspace and the detection parameters of a specific target with active visual markers (4.1.1), useful within unstructured environments. With a calibrated system and environment, it is possible to detect and compute, in real time, the pose of a target of interest. The combination of position and orientation or attitude is referred as the pose of an object. For performance analysis and quality of the information obtained, this tools are compared with others already existent.A engenharia de sistemas autónomos actua em diversas vertentes. Uma delas, a visão artificial, em que este trabalho assenta, tornou-se uma das de maior interesse em múltiplos contextos e focos na robótica. Assim, este trabalho procura abordar e superar algumas dificuldades encontradas aquando do desenvolvimento de tecnologias baseadas na visão artificial. Inicialmente, propõe-se a fornecer ferramentas para realizar as calibrações necessárias de intrínsecos (3.2.1) e extrínsecos (3.3) de sistemas de visão stereo em tempo real para atingir o objectivo principal, uma ferramenta de cálculo da posição e orientação de um alvo activo e colorido através de sistemas de visão stereo. Desenhadas para serem intuitivas, fáceis de utilizar e capazes de operar em tempo real, estas ferramentas foram desenvolvidas tendo em vista a sua integração quer com camaras de baixo custo e aquisição fácil como com camaras mais complexas e de maior resolução. Propõem-se a realizar a calibração dos parâmetros inerentes ao sistema de visão stereo como os intrínsecos de cada uma das camaras e as matrizes de extrínsecos que relacionam ambas as camaras. Este trabalho foi orientado para utilização em meio subaquático onde se presenciam ambientes com elevada dinâmica visual e maior complexidade computacional devido `a suas particularidades como reflexões de luz e má visibilidade. Com a informação de calibração disponível, quer gerada pelas ferramentas fornecidas, quer obtida a partir de outras, pode ser carregada para proceder a uma calibração simplista do espaço de cor e dos parâmetros de deteção de um alvo específico com marcadores ativos coloridos (4.1.1). Estes marcadores são ´uteis em ambientes não estruturados. Para análise da performance e qualidade da informação obtida, as ferramentas de calibração e cálculo de pose (posição e orientação), serão comparadas com outras já existentes

A Full Scale Camera Calibration Technique with Automatic Model Selection – Extension and Validation

This thesis presents work on the testing and development of a complete camera calibration approach which can be applied to a wide range of cameras equipped with normal, wide-angle, fish-eye, or telephoto lenses. The full scale calibration approach estimates all of the intrinsic and extrinsic parameters. The calibration procedure is simple and does not require prior knowledge of any parameters. The method uses a simple planar calibration pattern. Closed-form estimates for the intrinsic and extrinsic parameters are computed followed by nonlinear optimization. Polynomial functions are used to describe the lens projection instead of the commonly used radial model. Statistical information criteria are used to automatically determine the complexity of the lens distortion model. In the first stage experiments were performed to verify and compare the performance of the calibration method. Experiments were performed on a wide range of lenses. Synthetic data was used to simulate real data and validate the performance. Synthetic data was also used to validate the performance of the distortion model selection which uses Information Theoretic Criterion (AIC) to automatically select the complexity of the distortion model. In the second stage work was done to develop an improved calibration procedure which addresses shortcomings of previously developed method. Experiments on the previous method revealed that the estimation of the principal point during calibration was erroneous for lenses with a large focal length. To address this issue the calibration method was modified to include additional methods to accurately estimate the principal point in the initial stages of the calibration procedure. The modified procedure can now be used to calibrate a wide spectrum of imaging systems including telephoto and verifocal lenses. Survey of current work revealed a vast amount of research concentrating on calibrating only the distortion of the camera. In these methods researchers propose methods to calibrate only the distortion parameters and suggest using other popular methods to find the remaining camera parameters. Using this proposed methodology we apply distortion calibration to our methods to separate the estimation of distortion parameters. We show and compare the results with the original method on a wide range of imaging systems

3D object reconstruction using computer vision : reconstruction and characterization applications for external human anatomical structures

Tese de doutoramento. Engenharia Informática. Faculdade de Engenharia. Universidade do Porto. 201