A survey of techniques for reducing interference in real-time applications on multicore platforms

This survey reviews the scientific literature on techniques for reducing interference in real-time multicore systems, focusing on the approaches proposed between 2015 and 2020. It also presents proposals that use interference reduction techniques without considering the predictability issue. The survey highlights interference sources and categorizes proposals from the perspective of the shared resource. It covers techniques for reducing contentions in main memory, cache memory, a memory bus, and the integration of interference effects into schedulability analysis. Every section contains an overview of each proposal and an assessment of its advantages and disadvantages.This work was supported in part by the Comunidad de Madrid Government "Nuevas Técnicas de Desarrollo de Software de Tiempo Real Embarcado Para Plataformas. MPSoC de Próxima Generación" under Grant IND2019/TIC-17261

Response-Time Analysis of Limited-Preemptive Parallel DAG Tasks Under Global Scheduling

Most recurrent real-time applications can be modeled as a set of sequential code segments (or blocks) that must be (repeatedly) executed in a specific order. This paper provides a schedulability analysis for such systems modeled as a set of parallel DAG tasks executed under any limited-preemptive global job-level fixed priority scheduling policy. More precisely, we derive response-time bounds for a set of jobs subject to precedence constraints, release jitter, and execution-time uncertainty, which enables support for a wide variety of parallel, limited-preemptive execution models (e.g., periodic DAG tasks, transactional tasks, generalized multi-frame tasks, etc.). Our analysis explores the space of all possible schedules using a powerful new state abstraction and state-pruning technique. An empirical evaluation shows the analysis to identify between 10 to 90 percentage points more schedulable task sets than the state-of-the-art schedulability test for limited-preemptive sporadic DAG tasks. It scales to systems of up to 64 cores with 20 DAG tasks. Moreover, while our analysis is almost as accurate as the state-of-the-art exact schedulability test based on model checking (for sequential non-preemptive tasks), it is three orders of magnitude faster and hence capable of analyzing task sets with more than 60 tasks on 8 cores in a few seconds

Contention in multicore hardware shared resources: Understanding of the state of the art

The real-time systems community has over the years devoted considerable attention to the impact on execution timing that arises from contention on access to hardware shared resources. The relevance of this problem has been accentuated with the arrival of multicore processors. From the state of the art on the subject, there appears to be considerable diversity in the understanding of the problem and in the “approach” to solve it. This sparseness makes it difficult for any reader to form a coherent picture of the problem and solution space. This paper draws a tentative taxonomy in which each known approach to the problem can be categorised based on its specific goals and assumptions.Postprint (published version

Hard Real-Time Stationary GANG-Scheduling

The scheduling of parallel real-time tasks enables the efficient utilization of modern multiprocessor platforms for systems with real-time constrains. In this situation, the gang task model, in which each parallel sub-job has to be executed simultaneously, has shown significant performance benefits due to reduced context switches and more efficient intra-task synchronization. In this paper, we provide the first schedulability analysis for sporadic constrained-deadline gang task systems and propose a novel stationary gang scheduling algorithm. We show that the schedulability problem of gang task sets can be reduced to the uniprocessor self-suspension schedulability problem. Furthermore, we provide a class of partitioning algorithms to find a stationary gang assignment and show that it bounds the worst-case interference of each task. To demonstrate the effectiveness of our proposed approach, we evaluate it for implicit-deadline systems using randomized task sets under different settings, showing that our approach outperforms the state-of-the-art

Study, analysis and new scheduling proposals in partitioned real-time systems

[ES] En nuestra vida cotidiana, cada vez más ordenadores controlan nuestro entorno: teléfonos móviles, procesos industriales, asistencia a la conducción, etc. Todos estos sistemas presentan requisitos estrictos para garantizar un comportamiento adecuado. En muchos de estos sistemas, cumplir con las restricciones de tiempo es un factor tan importante como el resultado lógico de los cálculos. Desde hace aproximadamente 40 años, los sistemas en tiempo real son muy atractivos en el campo de la computación y hoy en día se aplican en áreas de gran alcance como aplicaciones industriales, aplicaciones aeroespaciales, telecomunicaciones, electrónica de consumo, etc. Algunos retos a abordar en el campo del tiempo real son el determinismo y la predecibilidad del comportamiento temporal del sistema. En este sentido, garantizar la ejecución del programa y los tiempos de respuesta del sistema son requisitos esenciales que deben cumplirse estrictamente a través de estrategias apropiadas de planificación de tareas. Además, las arquitecturas multiprocesador se están volviendo más populares debido al hecho de que las capacidades de procesamiento y los recursos computacionales de los sistemas están aumentando. Un estudio reciente estima que existe una tendencia creciente entre las arquitecturas multiprocesador a combinar diferentes niveles de criticidad en el mismo sistema. En este sentido, proporcionar aislamiento entre las aplicaciones es extremadamente necesario. La tecnología particionada es capaz de lidiar con este propósito. Además, la gestión de la energía es un problema relevante en los sistemas en tiempo real. Muchos sistemas empotrados de tiempo real, como dispositivos portátiles o robots móviles que requieren baterías, buscan encontrar técnicas que reduzcan el consumo de energía y, como consecuencia, aumenten la vida útil de sus baterías. También se obtienen claros beneficios operativos, financieros, monetarios y ambientales al minimizar el consumo de energía. Con todo ello, este trabajo aborda el problema de planificabilidad y contribuye al estudio de las nuevas técnicas de planificación en sistemas particionados de tiempo real. Estas técnicas proporcionan el tiempo mínimo para planificar de manera factible conjuntos de tareas. Además, se proponen técnicas de asignación para sistemas multiprocesador cuyo objetivo principal es reducir el consumo de energía del sistema global. Finalmente, se presentan los resultados obtenidos así como los trabajos futuros relacionados con este trabajo[CA] En la nostra vida quotidiana, cada vegada més ordenadors controlen el nostre entorn: telèfons mòbils, processos industrials, assistència a la conducció, etc. Tots aquests sistemes presenten requisits estrictes per a garantir un comportament adequat. En molts d' aquests sistemes, complir amb les restriccions de temps és un factor tan important com el resultat lògic dels càlculs. Des de fa aproximadament 40 anys, els sistemes en temps real són molt atractius en el camp de la computació i hui dia s' apliquen en àrees de gran abast com a aplicacions industrials, aplicacions aeroespacials, telecomunicacions, electrònica de consum, etc. Alguns reptes a abordar en el camp del temps real són el determinisme i la predictibilitat del comportament temporal del sistema. En aquest sentit, garantir l'execució del programa i els temps de resposta del sistema són requisits essencials que han de complir-se estrictament a través d'estratègies apropiades de planificació de tasques. A més, les arquitectures multiprocessador s'estan tornant més populars a causa del fet que les capacitats de processament i els recursos computacionals dels sistemes estan augmentant. Un estudi recent estima que existeix una tendència creixent entre les arquitectures multiprocessador a combinar diferents nivells de criticitat en el mateix sistema. En aquest sentit, proporcionar aïllament entre les aplicacions és extremadament necessari. La tecnologia particionada és capaç de bregar amb aquest propòsit. A més, la gestió de l'energia és un problema rellevant en els sistemes en temps real. Molts sistemes embebits de temps real, com a dispositius portàtils o robots mòbils que requereixen bateries, busquen trobar tècniques que reduïsquen el consum d'energia i, com a conseqüència, augmenten la vida útil de les seues bateries. També s'obtenen clars beneficis operatius, financers, monetaris i ambientals en minimitzar el consum d'energia. Amb tot això, aquest treball aborda el problema de planificabilitat i contribueix a l'estudi de les noves tècniques de planificació en sistemes particionats de temps real. Aquestes tècniques proporcionen el temps mínim per a planificar de manera factible conjunts de tasques. A més, es proposen tècniques d'assignació per a sistemes multiprocessador l'objectiu principal del qual és reduir el consum d'energia del sistema global. Finalment, es presenten els resultats obtinguts així com els treballs futurs relacionats amb aquest treball.[EN] In our everyday lives, more and more computers are controlling our environment: mobile phones, industrial processes, driving assistance, etc. All these systems present strict requirements to ensure proper behaviour. In many of these systems, the time at which the action is delivered is as important as the logical result of the computation. About 40 years ago, real-time systems began to attract attention in computing field and nowadays are applied in wide ranging areas as industrial applications, aerospace, telecommunication applications, consumer electronics, etc. Some real-time challenges that must be addressed are determinism and predictability of the temporal behaviour of the system. In this sense, to guarantee program execution and system response times are essential requirements that must be strictly met through appropriate task scheduling strategies. Furthermore, multiprocessor architectures are becoming more popular due to the fact that processing capabilities and computational resources are increasing. A recent study estimates that there is an increasing tendency among multiprocessor architectures to combine different levels of criticality in the same system. In this sense, to provide isolation between applications is extremely required. Partitioned technology is able to deal with this purpose. In addition, energy management is a relevant problem in real-time systems. Many real-time embedded systems, as wearable devices or mobile robots that require batteries, seek to find techniques that reduce the energy consumption and, as a consequence, increase the lifetime of their batteries. Also clear operational, financial, monetary and environmental gains are reached when minimizing energy consumption. Faced with all this, this work addresses the problem of schedulability and contributes to the study of new scheduling techniques in partitioned real-time systems. These techniques provide the minimum time to feasible schedule tasks sets. Moreover, allocation techniques for multicore systems whose main objective is to reduce the energy consumption of the overall system are also proposed. Finally, some of the obtained results are discussed as conclusions and future works are introduced.Guasque Ortega, A. (2019). Study, analysis and new scheduling proposals in partitioned real-time systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/135279TESI

Schedulability analysis and optimization of time-partitioned distributed real-time systems

RESUMEN: La creciente complejidad de los sistemas de control modernos lleva a muchas empresas a tener que re-dimensionar o re-diseñar sus soluciones para adecuarlas a nuevas funcionalidades y requisitos. Un caso paradigmático de esta situación se ha dado en el sector ferroviario, donde la implementación de las aplicaciones de señalización se ha llevado a cabo empleando técnicas tradicionales que, si bien ahora mismo cumplen con los requisitos básicos, su rendimiento temporal y escalabilidad funcional son sustancialmente mejorables. A partir de las soluciones propuestas en esta tesis, además de contribuir a la validación de sistemas que requieren certificación de seguridad funcional, también se creará la tecnología base de análisis de planificabilidad y optimización de sistemas de tiempo real distribuidos generales y también basados en particionado temporal, que podrá ser aplicada en distintos entornos en los que los sistemas ciberfísicos juegan un rol clave, por ejemplo en aplicaciones de Industria 4.0, en los que pueden presentarse problemas similares en el futuro.ABSTRACT:he increasing complexity of modern control systems leads many companies to have to resize or redesign their solutions to adapt them to new functionalities and requirements. A paradigmatic case of this situation has occurred in the railway sector, where the implementation of signaling applications has been carried out using traditional techniques that, although they currently meet the basic requirements, their time performance and functional scalability can be substantially improved. From the solutions proposed in this thesis, besides contributing to the assessment of systems that require functional safety certification, the base technology for schedulability analysis and optimization of general as well as time-partitioned distributed real-time systems will be derived, which can be applied in different environments where cyber-physical systems play a key role, for example in Industry 4.0 applications, where similar problems may arise in the future

Sharing Non-Processor Resources in Multiprocessor Real-Time Systems

Computing devices are increasingly being leveraged in cyber-physical systems, in which computing devices sense, control, and interact with the physical world. Associated with many such real-world interactions are strict timing constraints, which if unsatisfied, can lead to catastrophic consequences. Modern examples of such timing constraints are prevalent in automotive systems, such as airbag controllers, anti-lock brakes, and new autonomous features. In all of these examples, a failure to correctly respond to an event in a timely fashion could lead to a crash, damage, injury and even loss of life. Systems with imperative timing constraints are called real-time systems, and are broadly the subject of this dissertation. Much previous work on real-time systems and scheduling theory assumes that computing tasks are independent, i.e., the only resource they share is the platform upon which they are executed. In practice, however, tasks share many resources, ranging from more overt resources such as shared memory objects, to less overt ones, including data buses and other hardware and I/O devices. Accesses to some such resources must be synchronized to ensure safety, i.e., logical correctness, while other resources may exhibit better run-time performance if accesses are explicitly synchronized. The goal of this dissertation was to develop new synchronization algorithms and associated analysis techniques that can be used to synchronize access to many classes of resources, while improving the overall resource utilization, specifically as measured by real-time schedulability. Towards that goal, the Real-Time Nested Locking Protocol (RNLP), the first multiprocessor real-time locking protocol that supports lock nesting or fine-grained locking is proposed and analyzed. Furthermore, the RNLP is extended to support reader/writer locking, as well as k-exclusion locking. All presented RNLP variants are proven optimal. Furthermore, experimental results demonstrate the schedulability-related benefits of the RNLP. Additionally, three new synchronization algorithms are presented, which are specifically motivated by the need to manage shared hardware resources to improve real-time predictability. Furthermore, two new classes of shared resources are defined, and the first synchronization algorithms for them are proposed. To analyze these new algorithms, a novel analysis technique called idleness analysis is presented, which can be used to incorporate the effects of blocking into schedulability analysis.Doctor of Philosoph

Modular Avionics Software Integration on Multi-Core COTS : certification-Compliant Methodology and Timing Analysis Metrics for Legacy Software Reuse in Modern Aerospace Systems

Interference in multicores is undesirable for hard real-time systems and especially in the aerospace industry, for which it is mandatory to ensure beforehand timing predictability and deadlines enforcement in a system runtime behavior, in order to be granted acceptance by certification authorities. The goal of this thesis is to propose an approach for multi-core integration of legacy IMA software, without any hardware nor software modification, and which complies as much as possible to current, incremental certification and IMA key concepts such as robust time and space partitioning. The motivations of this thesis are to stick as much as possible to the current IMA software integration process in order to maximize the chances of acceptation by avionics industries of the contributions of this thesis, but also because the current process has long been proven efficient on aerospace systems currently in usage. Another motivation is to minimize the extra effort needed to provide certification authorities with timing-related verification information required when seeking approval. As a secondary goal depending on the possibilities, the contributions should offer design optimization features, and help reduce the time-to-market by automating some steps of the design and verification process. This thesis proposes two complete methodologies for IMA integration on multi-core COTS. Each of them offers different advantages and has different drawbacks, and therefore each of them may correspond to its own, complementary situations. One fits all avionics and certification requirements of incremental verification and robust partitioning and therefore fits up to DAL A applications, while the other offers maximum Size, Weight and Power (SWaP) optimization and fits either up to DAL C applications, multipartition applications or non-IMA applications. The methodologies are said to be "complete" because this thesis provides all necessary metrics to go through all steps of the software integration process. More specifically, this includes, for each strategy: - a static timing analysis for safely upper-bounding inter-core interference, and deriving the corresponding WCET upper-bounds for each task. - a Constraint Programming (CP) formulation for automated software/hardware allocation; the resulting allocation is correct by construction since the CP process embraces the proposed timing analysis mentioned earlier. - a CP formulation for automated schedule generation; the resulting schedule is correct by construction since the CP process embraces the proposed timing analysis mentioned earlier

Scheduling and locking in multiprocessor real-time operating systems

With the widespread adoption of multicore architectures, multiprocessors are now a standard deployment platform for (soft) real-time applications. This dissertation addresses two questions fundamental to the design of multicore-ready real-time operating systems: (1) Which scheduling policies offer the greatest flexibility in satisfying temporal constraints; and (2) which locking algorithms should be used to avoid unpredictable delays? With regard to Question 1, LITMUSRT, a real-time extension of the Linux kernel, is presented and its design is discussed in detail. Notably, LITMUSRT implements link-based scheduling, a novel approach to controlling blocking due to non-preemptive sections. Each implemented scheduler (22 configurations in total) is evaluated under consideration of overheads on a 24-core Intel Xeon platform. The experiments show that partitioned earliest-deadline first (EDF) scheduling is generally preferable in a hard real-time setting, whereas global and clustered EDF scheduling are effective in a soft real-time setting. With regard to Question 2, real-time locking protocols are required to ensure that the maximum delay due to priority inversion can be bounded a priori. Several spinlock- and semaphore-based multiprocessor real-time locking protocols for mutual exclusion (mutex), reader-writer (RW) exclusion, and k-exclusion are proposed and analyzed. A new category of RW locks suited to worst-case analysis, termed phase-fair locks, is proposed and three efficient phase-fair spinlock implementations are provided (one with few atomic operations, one with low space requirements, and one with constant RMR complexity). Maximum priority-inversion blocking is proposed as a natural complexity measure for semaphore protocols. It is shown that there are two classes of schedulability analysis, namely suspension-oblivious and suspension-aware analysis, that yield two different lower bounds on blocking. Five asymptotically optimal locking protocols are designed and analyzed: a family of mutex, RW, and k-exclusion protocols for global, partitioned, and clustered scheduling that are asymptotically optimal in the suspension-oblivious case, and a mutex protocol for partitioned scheduling that is asymptotically optimal in the suspension-aware case. A LITMUSRT-based empirical evaluation is presented that shows these protocols to be practical