906 research outputs found
Machine Learning in Wireless Sensor Networks: Algorithms, Strategies, and Applications
Wireless sensor networks monitor dynamic environments that change rapidly
over time. This dynamic behavior is either caused by external factors or
initiated by the system designers themselves. To adapt to such conditions,
sensor networks often adopt machine learning techniques to eliminate the need
for unnecessary redesign. Machine learning also inspires many practical
solutions that maximize resource utilization and prolong the lifespan of the
network. In this paper, we present an extensive literature review over the
period 2002-2013 of machine learning methods that were used to address common
issues in wireless sensor networks (WSNs). The advantages and disadvantages of
each proposed algorithm are evaluated against the corresponding problem. We
also provide a comparative guide to aid WSN designers in developing suitable
machine learning solutions for their specific application challenges.Comment: Accepted for publication in IEEE Communications Surveys and Tutorial
QoS BASED ENERGY EFFICIENT ROUTING IN WIRELESS SENSOR NETWORK
A Wireless Sensor Networks (WSN) is composed of a large number of low-powered
sensor nodes that are randomly deployed to collect environmental data. In a WSN,
because of energy scarceness, energy efficient gathering of sensed information is one
of the most critical issues. Thus, most of the WSN routing protocols found in the
literature have considered energy awareness as a key design issue. Factors like
throughput, latency and delay are not considered as critical issues in these protocols.
However, emerging WSN applications that involve multimedia and imagining sensors
require end-to-end delay within acceptable limits. Hence, in addition to energy
efficiency, the parameters (delay, packet loss ratio, throughput and coverage) have
now become issues of primary concern. Such performance metrics are usually
referred to as the Quality of Service (QoS) in communication systems. Therefore, to
have efficient use of a sensor node’s energy, and the ability to transmit the imaging
and multimedia data in a timely manner, requires both a QoS based and energy
efficient routing protocol. In this research work, a QoS based energy efficient routing
protocol for WSN is proposed. To achieve QoS based energy efficient routing, three
protocols are proposed, namely the QoS based Energy Efficient Clustering (QoSEC)
for a WSN, the QoS based Energy Efficient Sleep/Wake Scheduling (QoSES) for a
WSN, and the QoS based Energy Efficient Mobile Sink (QoSEM) based Routing for a
Clustered WSN.
Firstly, in the QoSEC, to achieve energy efficiency and to prolong
network/coverage lifetime, some nodes with additional energy resources, termed as
super-nodes, in addition to normal capability nodes, are deployed. Multi-hierarchy
clustering is done by having super-nodes (acting as a local sink) at the top tier, cluster
head (normal node) at the middle tier, and cluster member (normal node) at the lowest
tier in the hierarchy. Clustering within normal sensor nodes is done by optimizing the
network/coverage lifetime through a cluster-head-selection algorithm and a
sleep/wake scheduling algorithm. QoSEC resolves the hot spot problem and prolongs
network/coverage lifetime.
Secondly, the QoSES addressed the delay-minimization problem in sleep/wake
scheduling for event-driven sensor networks for delay-sensitive applications. For this
purpose, QoSES assigns different sleep/wake intervals (longer wake interval) to
potential overloaded nodes, according to their varied traffic load requirement defined
a) by node position in the network, b) by node topological importance, and c) by
handling burst traffic in the proximity of the event occurrence node. Using these
heuristics, QoSES minimizes the congestion at nodes having heavy traffic loads and
ultimately reduces end-to-end delay while maximizing the throughput.
Lastly, the QoSEM addresses hot spot problem, delay minimization, and QoS
assurance. To address hot-spot problem, mobile sink is used, that move in the network
to gather data by virtue of which nodes near to the mobile sink changes with each
movement, consequently hot spot problem is minimized. To achieve delay
minimization, static sink is used in addition to the mobile sink. Delay sensitive data is
forwarded to the static sink, while the delay tolerant data is sent through the mobile
sink. For QoS assurance, incoming traffic is divided into different traffic classes and
each traffic class is assigned different priority based on their QoS requirement
(bandwidth, delay) determine by its message type and content. Furthermore, to
minimize delay in mobile sink data gathering, the mobile sink is moved throughout
the network based on the priority messages at the nodes. Using these heuristics,
QoSEM incur less end-to-end delay, is energy efficient, as well as being able to
ensure QoS.
Simulations are carried out to evaluate the performance of the proposed protocols
of QoSEC, QoSES and QoSEM, by comparing their performance with the established
contemporary protocols. Simulation results have demonstrated that when compared
with contemporary protocols, each of the proposed protocol significantly prolong the
network and coverage lifetime, as well as improve the other QoS routing parameters,
such as delay, packet loss ratio, and throughput
Multihop clustering algorithm for load balancing in wireless sensor networks
The paper presents a new cluster based routing algorithm that exploits the redundancy properties of the sensor networks in order to address the traditional problem of load balancing and energy efficiency in the WSNs.The algorithm makes use of the nodes in a sensor network of which area coverage is covered by the neighbours of the nodes and mark them as temporary cluster heads. The algorithm then forms two layers of multi hop communication. The bottom layer which involves intra cluster communication and the top layer which involves inter cluster communication involving the temporary cluster heads. Performance studies indicate that the proposed algorithm solves effectively the problem of load balancing and is also more efficient in terms of energy consumption from Leach and the enhanced version of Leach
Recommended from our members
Energy-aware distributed routing algorithm to tolerate network failure in wireless sensor networks
Wireless Sensor Networks are prone to link/node failures due to various environmental hazards such as interference and internal faults in deployed sensor nodes. Such failures can result in a disconnection in part of the network and the sensed data being unable to obtain a route to the sink(s), i.e. a network failure. Network failures potentially degrade the Quality of Service (QoS) of Wireless Sensor Networks (WSNs). It is very difficult to monitor network failures using a manual operator in a harsh or hostile environment. In such environments, communication links can easy fail because of node unequal energy depletion and hardware failure or invasion. Thus it is desirable that deployed sensor nodes are capable of overcoming network failures. In this paper, we consider the problem of tolerating network failures seen by deployed sensor nodes in a WSN. We first propose a novel clustering algorithm for WSNs, termed Distributed Energy Efficient Heterogeneous Clustering (DEEHC) that selects cluster heads according to the residual energy of deployed sensor nodes with the aid of a secondary timer. During the clustering phase, each sensor node finds k-vertex disjoint paths to cluster heads depending on the energy level of its neighbor sensor nodes. We then present a k-Vertex Disjoint Path Routing (kVDPR) algorithm where each cluster head finds k-vertex disjoint paths to the base station and relays their aggregate data to the base station. Furthermore, we also propose a novel Route Maintenance Mechanism (RMM) that can repair k-vertex disjoint paths throughout the monitoring session. The resulting WSNs become tolerant to k-1 failures in the worst case. The proposed scheme has been extensively tested using various network scenarios and compared to the existing state of the art approaches to show the effectiveness of the proposed scheme
Smart Wireless Sensor Networks
The recent development of communication and sensor technology results in the growth of a new attractive and challenging area - wireless sensor networks (WSNs). A wireless sensor network which consists of a large number of sensor nodes is deployed in environmental fields to serve various applications. Facilitated with the ability of wireless communication and intelligent computation, these nodes become smart sensors which do not only perceive ambient physical parameters but also be able to process information, cooperate with each other and self-organize into the network. These new features assist the sensor nodes as well as the network to operate more efficiently in terms of both data acquisition and energy consumption. Special purposes of the applications require design and operation of WSNs different from conventional networks such as the internet. The network design must take into account of the objectives of specific applications. The nature of deployed environment must be considered. The limited of sensor nodes� resources such as memory, computational ability, communication bandwidth and energy source are the challenges in network design. A smart wireless sensor network must be able to deal with these constraints as well as to guarantee the connectivity, coverage, reliability and security of network's operation for a maximized lifetime. This book discusses various aspects of designing such smart wireless sensor networks. Main topics includes: design methodologies, network protocols and algorithms, quality of service management, coverage optimization, time synchronization and security techniques for sensor networks
Overlapped hierarchical clusters routing protocol for improving quality of service
The rapid development in communications and sensors technologies make wireless sensor networks (WSNs) as essential key in several advanced applications such as internet of things (IoT). The increasing demands on using WSNs required high quality of services (QoS) because most WSNs applications have critical requirements. This work aims to offer a routing protocol to improve the QoS in WSNs, taking in consideration its ability to prolong the lifetime of the network, optimize the utilization of the limited bandwidth available, and decrease the latency that accompanies the packets transmitted to the gateway. The proposed protocol is called overlapped hierarchical cluster routing protocol (OHCRP). OHCRP is compared with the traditional routing protocols such as SPEED, and THVR. The results show that OHCRP reduces latency effectively and achieve high energy conservation, which lead to increase the network lifetime and insure network availability
Multihop clustering algorithm for load balancing in wireless sensor networks
The paper presents a new cluster based routing algorithm that exploits the redundancy properties of the sensor networks in order to address the traditional problem of load balancing and energy efficiency in the WSNs.The algorithm makes use of the nodes in a sensor network of which area coverage is covered by the neighbours of the nodes and mark them as temporary cluster heads. The algorithm then forms two layers of multi hop communication. The bottom layer which involves intra cluster communication and the top layer which involves inter cluster communication involving the temporary cluster heads. Performance studies indicate that the proposed algorithm solves effectively the problem of load balancing and is also more efficient in terms of energy consumption from Leach and the enhanced version of Leach
An energy-aware protocol for data gathering applications in wireless sensor networks
2006-2007 > Academic research: refereed > Refereed conference paperVersion of RecordPublishe
Clustering objectives in wireless sensor networks: A survey and research direction analysis
Wireless Sensor Networks (WSNs) typically include thousands of resource-constrained sensors to monitor their surroundings, collect data, and transfer it to remote servers for further processing. Although WSNs are considered highly flexible ad-hoc networks, network management has been a fundamental challenge in these types of net- works given the deployment size and the associated quality concerns such as resource management, scalability, and reliability. Topology management is considered a viable technique to address these concerns. Clustering is the most well-known topology management method in WSNs, grouping nodes to manage them and/or executing various tasks in a distributed manner, such as resource management. Although clustering techniques are mainly known to improve energy consumption, there are various quality-driven objectives that can be realized through clustering. In this paper, we review comprehensively existing WSN clustering techniques, their objectives and the network properties supported by those techniques. After refining more than 500 clustering techniques, we extract about 215 of them as the most important ones, which we further review, catergorize and classify based on clustering objectives and also the network properties such as mobility and heterogeneity. In addition, statistics are provided based on the chosen metrics, providing highly useful insights into the design of clustering techniques in WSNs.publishedVersio
- …