Composite Iterative Algorithm and Architecture for q-th Root Calculation

An algorithm for the q-th root extraction, being q any integer, is presented in this paper. The algorithm is based on an optimized implementation of X^{1/q} by a sequence of parallel and/or overlapped operations: (1) reciprocal, (2) digit-recurrence logarithm, (3) left-to-right carry-free multiplication and (4) on-line exponential. A detailed error analysis and two architectures are proposed, for low precision q and for higher precision q. The execution time and hardware requirements are estimated for single and double precision floating-point computations for several radices; this helps to determine which radices result in the most efficient implementations. The architectures proposed improve the features of other architectures for q-th root extraction.Dans cet article, nous présentons un algorithme matériel pour l'extraction de la racine q-ième d'un nombre X, où q est un entier naturel non nul. Cet algorithme est basé sur une implantation optimisée de la fonction X^{1/q} par une séquence d'opérations parallèles et/ou superposées: (1) réciproque, (2) logarithme chiffre par chiffre, (3) multiplication de gauche-à-droite sans propagation de retenue et (4) exponentielle en ligne. Une analyse détaillée des erreurs et deux architectures sont proposées, pour q de basse précision et pour q de précision plus haute. Le temps d'exécution et les composants matériels à utiliser sont estimés pour des calculs en virgule flottante simple et double précision et pour plusieurs bases. Cette étude aide à déterminer quelles bases mènent aux implantations les plus efficaces. Les architectures proposées améliorent les caractéristiques d'architectures précédentes destinées à l'extraction des racines

An FPGA Implementation of the Powering Function with Single Precision Floating-Point Arithm

n this work we present an FPGA implementation of a single-precision °oating-point arith- metic powering unit. Our powering unit is based on an indirect method that transforms xy into a chain of operations involving a logarithm, a multiplication, an exponential function and dedicated logic for the case of a negative base. This approach allows to use the full input range for the base and exponent without limiting the range of the exponent as in direct methods. A tailored hardware implementation is exploited to increase the accuracy of the unit reducing the relative errors of the operations while high performance is obtained taking advantage of the FPGA capabilities for parallel architectures. A careful design of the pipeline stages of the involved operators allows a clock cycle of 201.3 MHz on a Xilinx Virtex-4 FPG

High-Speed Function Approximation using a Minimax Quadratic Interpolator

A table-based method for high-speed function approximation in single-precision floating-point format is presented in this paper. Our focus is the approximation of reciprocal, square root, square root reciprocal, exponentials, logarithms, trigonometric functions, powering (with a fixed exponent p), or special functions. The algorithm presented here combines table look-up, an enhanced minimax quadratic approximation, and an efficient evaluation of the second-degree polynomial (using a specialized squaring unit, redundant arithmetic, and multioperand addition). The execution times and area costs of an architecture implementing our method are estimated, showing the achievement of the fast execution times of linear approximation methods and the reduced area requirements of other second-degree interpolation algorithms. Moreover, the use of an enhanced minimax approximation which, through an iterative process, takes into account the effect of rounding the polynomial coefficients to a finite size allows for a further reduction in the size of the look-up tables to be used, making our method very suitable for the implementation of an elementary function generator in state-of-the-art DSPs or graphics processing units (GPUs)

A System for Compressive Sensing Signal Reconstruction

An architecture for hardware realization of a system for sparse signal reconstruction is presented. The threshold based reconstruction method is considered, which is further modified in this paper to reduce the system complexity in order to provide easier hardware realization. Instead of using the partial random Fourier transform matrix, the minimization problem is reformulated using only the triangular R matrix from the QR decomposition. The triangular R matrix can be efficiently implemented in hardware without calculating the orthogonal Q matrix. A flexible and scalable realization of matrix R is proposed, such that the size of R changes with the number of available samples and sparsity level.Comment: 6 page

Dedicated Hardware for Complex Mathematical Operations

New hardware FPGA implementations for the efficient computations of division, natural logarithm and exponential function are proposed. The proposed implementations use generic floating-point adder and multiplier with small additional resources that are shared to compute more frequently used multiply and accumulate operations. Hardware sharing improved the resource utilization. The time of the computation has been reduced to only 6 clock cycles when the natural logarithm and exponential function are calculated. The division is calculated in 5 clock cycles. They are designed as technology independent high throughput computing cores with minimized memory requirements which can be used in higher numbers to significantly increased calculation speed in spectral processing. A new universal arithmetic floating-point unit is also proposed

One-log call iterative solution of the Colebrook equation for flow friction based on Pade polynomials

The 80 year-old empirical Colebrook function zeta, widely used as an informal standard for hydraulic resistance, relates implicitly the unknown flow friction factor lambda, with the known Reynolds number Re and the known relative roughness of a pipe inner surface epsilon* ; lambda = zeta(Re, epsilon* ,lambda). It is based on logarithmic law in the form that captures the unknown flow friction factor l in a way that it cannot be extracted analytically. As an alternative to the explicit approximations or to the iterative procedures that require at least a few evaluations of computationally expensive logarithmic function or non-integer powers, this paper offers an accurate and computationally cheap iterative algorithm based on Pade polynomials with only one log-call in total for the whole procedure (expensive log-calls are substituted with Pade polynomials in each iteration with the exception of the first). The proposed modification is computationally less demanding compared with the standard approaches of engineering practice, but does not influence the accuracy or the number of iterations required to reach the final balanced solution.Web of Science117art. no. 182

Computing Correctly Rounded Integer Powers in Floating-Point Arithmetic

23 pagesWe introduce several algorithms for accurately evaluating powers to a positive integer in floating-point arithmetic, assuming a fused multiply-add (fma) instruction is available. We aim at always obtaining correctly-rounded results in round-to-nearest mode, that is, our algorithms return the floating-point number that is nearest the exact value

Square-rich fixed point polynomial evaluation on FPGAs

Polynomial evaluation is important across a wide range of application domains, so significant work has been done on accelerating its computation. The conventional algorithm, referred to as Horner's rule, involves the least number of steps but can lead to increased latency due to serial computation. Parallel evaluation algorithms such as Estrin's method have shorter latency than Horner's rule, but achieve this at the expense of large hardware overhead. This paper presents an efficient polynomial evaluation algorithm, which reforms the evaluation process to include an increased number of squaring steps. By using a squarer design that is more efficient than general multiplication, this can result in polynomial evaluation with a 57.9% latency reduction over Horner's rule and 14.6% over Estrin's method, while consuming less area than Horner's rule, when implemented on a Xilinx Virtex 6 FPGA. When applied in fixed point function evaluation, where precision requirements limit the rounding of operands, it still achieves a 52.4% performance gain compared to Horner's rule with only a 4% area overhead in evaluating 5th degree polynomials

Algorithms and architectures for decimal transcendental function computation

Nowadays, there are many commercial demands for decimal floating-point (DFP) arithmetic operations such as financial analysis, tax calculation, currency conversion, Internet based applications, and e-commerce. This trend gives rise to further development on DFP arithmetic units which can perform accurate computations with exact decimal operands. Due to the significance of DFP arithmetic, the IEEE 754-2008 standard for floating-point arithmetic includes it in its specifications. The basic decimal arithmetic unit, such as decimal adder, subtracter, multiplier, divider or square-root unit, as a main part of a decimal microprocessor, is attracting more and more researchers' attentions. Recently, the decimal-encoded formats and DFP arithmetic units have been implemented in IBM's system z900, POWER6, and z10 microprocessors. Increasing chip densities and transistor count provide more room for designers to add more essential functions on application domains into upcoming microprocessors. Decimal transcendental functions, such as DFP logarithm, antilogarithm, exponential, reciprocal and trigonometric, etc, as useful arithmetic operations in many areas of science and engineering, has been specified as the recommended arithmetic in the IEEE 754-2008 standard. Thus, virtually all the computing systems that are compliant with the IEEE 754-2008 standard could include a DFP mathematical library providing transcendental function computation. Based on the development of basic decimal arithmetic units, more complex DFP transcendental arithmetic will be the next building blocks in microprocessors. In this dissertation, we researched and developed several new decimal algorithms and architectures for the DFP transcendental function computation. These designs are composed of several different methods: 1) the decimal transcendental function computation based on the table-based first-order polynomial approximation method; 2) DFP logarithmic and antilogarithmic converters based on the decimal digit-recurrence algorithm with selection by rounding; 3) a decimal reciprocal unit using the efficient table look-up based on Newton-Raphson iterations; and 4) a first radix-100 division unit based on the non-restoring algorithm with pre-scaling method. Most decimal algorithms and architectures for the DFP transcendental function computation developed in this dissertation have been the first attempt to analyze and implement the DFP transcendental arithmetic in order to achieve faithful results of DFP operands, specified in IEEE 754-2008. To help researchers evaluate the hardware performance of DFP transcendental arithmetic units, the proposed architectures based on the different methods are modeled, verified and synthesized using FPGAs or with CMOS standard cells libraries in ASIC. Some of implementation results are compared with those of the binary radix-16 logarithmic and exponential converters; recent developed high performance decimal CORDIC based architecture; and Intel's DFP transcendental function computation software library. The comparison results show that the proposed architectures have significant speed-up in contrast to the above designs in terms of the latency. The algorithms and architectures developed in this dissertation provide a useful starting point for future hardware-oriented DFP transcendental function computation researches