Object Tracking

Object tracking consists in estimation of trajectory of moving objects in the sequence of images. Automation of the computer object tracking is a difficult task. Dynamics of multiple parameters changes representing features and motion of the objects, and temporary partial or full occlusion of the tracked objects have to be considered. This monograph presents the development of object tracking algorithms, methods and systems. Both, state of the art of object tracking methods and also the new trends in research are described in this book. Fourteen chapters are split into two sections. Section 1 presents new theoretical ideas whereas Section 2 presents real-life applications. Despite the variety of topics contained in this monograph it constitutes a consisted knowledge in the field of computer object tracking. The intention of editor was to follow up the very quick progress in the developing of methods as well as extension of the application

Groupwise non-rigid registration for automatic construction of appearance models of the human craniofacial complex for analysis, synthesis and simulation

Finally, a novel application of 3D appearance modelling is proposed: a faster than real-time algorithm for statistically constrained quasi-mechanical simulation. Experiments demonstrate superior realism, achieved in the proposed method by employing statistical appearance models to drive the simulation, in comparison with the comparable state-of-the-art quasi-mechanical approaches.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Efficient Dense Registration, Segmentation, and Modeling Methods for RGB-D Environment Perception

One perspective for artificial intelligence research is to build machines that perform tasks autonomously in our complex everyday environments. This setting poses challenges to the development of perception skills: A robot should be able to perceive its location and objects in its surrounding, while the objects and the robot itself could also be moving. Objects may not only be composed of rigid parts, but could be non-rigidly deformable or appear in a variety of similar shapes. Furthermore, it could be relevant to the task to observe object semantics. For a robot acting fluently and immediately, these perception challenges demand efficient methods. This theses presents novel approaches to robot perception with RGB-D sensors. It develops efficient registration, segmentation, and modeling methods for scene and object perception. We propose multi-resolution surfel maps as a concise representation for RGB-D measurements. We develop probabilistic registration methods that handle rigid scenes, scenes with multiple rigid parts that move differently, and scenes that undergo non-rigid deformations. We use these methods to learn and perceive 3D models of scenes and objects in both static and dynamic environments. For learning models of static scenes, we propose a real-time capable simultaneous localization and mapping approach. It aligns key views in RGB-D video using our rigid registration method and optimizes the pose graph of the key views. The acquired models are then perceived in live images through detection and tracking within a Bayesian filtering framework. An assumption frequently made for environment mapping is that the observed scene remains static during the mapping process. Through rigid multi-body registration, we take advantage of releasing this assumption: Our registration method segments views into parts that move independently between the views and simultaneously estimates their motion. Within simultaneous motion segmentation, localization, and mapping, we separate scenes into objects by their motion. Our approach acquires 3D models of objects and concurrently infers hierarchical part relations between them using probabilistic reasoning. It can be applied for interactive learning of objects and their part decomposition. Endowing robots with manipulation skills for a large variety of objects is a tedious endeavor if the skill is programmed for every instance of an object class. Furthermore, slight deformations of an instance could not be handled by an inflexible program. Deformable registration is useful to perceive such shape variations, e.g., between specific instances of a tool. We develop an efficient deformable registration method and apply it for the transfer of robot manipulation skills between varying object instances. On the object-class level, we segment images using random decision forest classifiers in real-time. The probabilistic labelings of individual images are fused in 3D semantic maps within a Bayesian framework. We combine our object-class segmentation method with simultaneous localization and mapping to achieve online semantic mapping in real-time. The methods developed in this thesis are evaluated in experiments on publicly available benchmark datasets and novel own datasets. We publicly demonstrate several of our perception approaches within integrated robot systems in the mobile manipulation context.Effiziente Dichte Registrierungs-, Segmentierungs- und Modellierungsmethoden für die RGB-D Umgebungswahrnehmung In dieser Arbeit beschäftigen wir uns mit Herausforderungen der visuellen Wahrnehmung für intelligente Roboter in Alltagsumgebungen. Solche Roboter sollen sich selbst in ihrer Umgebung zurechtfinden, und Wissen über den Verbleib von Objekten erwerben können. Die Schwierigkeit dieser Aufgaben erhöht sich in dynamischen Umgebungen, in denen ein Roboter die Bewegung einzelner Teile differenzieren und auch wahrnehmen muss, wie sich diese Teile bewegen. Bewegt sich ein Roboter selbständig in dieser Umgebung, muss er auch seine eigene Bewegung von der Veränderung der Umgebung unterscheiden. Szenen können sich aber nicht nur durch die Bewegung starrer Teile verändern. Auch die Teile selbst können ihre Form in nicht-rigider Weise ändern. Eine weitere Herausforderung stellt die semantische Interpretation von Szenengeometrie und -aussehen dar. Damit intelligente Roboter unmittelbar und flüssig handeln können, sind effiziente Algorithmen für diese Wahrnehmungsprobleme erforderlich. Im ersten Teil dieser Arbeit entwickeln wir effiziente Methoden zur Repräsentation und Registrierung von RGB-D Messungen. Zunächst stellen wir Multi-Resolutions-Oberflächenelement-Karten (engl. multi-resolution surfel maps, MRSMaps) als eine kompakte Repräsentation von RGB-D Messungen vor, die unseren effizienten Registrierungsmethoden zugrunde liegt. Bilder können effizient in dieser Repräsentation aggregiert werde, wobei auch mehrere Bilder aus verschiedenen Blickpunkten integriert werden können, um Modelle von Szenen und Objekte aus vielfältigen Ansichten darzustellen. Für die effiziente, robuste und genaue Registrierung von MRSMaps wird eine Methode vorgestellt, die Rigidheit der betrachteten Szene voraussetzt. Die Registrierung schätzt die Kamerabewegung zwischen den Bildern und gewinnt ihre Effizienz durch die Ausnutzung der kompakten multi-resolutionalen Darstellung der Karten. Die Registrierungsmethode erzielt hohe Bildverarbeitungsraten auf einer CPU. Wir demonstrieren hohe Effizienz, Genauigkeit und Robustheit unserer Methode im Vergleich zum bisherigen Stand der Forschung auf Vergleichsdatensätzen. In einem weiteren Registrierungsansatz lösen wir uns von der Annahme, dass die betrachtete Szene zwischen Bildern statisch ist. Wir erlauben nun, dass sich rigide Teile der Szene bewegen dürfen, und erweitern unser rigides Registrierungsverfahren auf diesen Fall. Unser Ansatz segmentiert das Bild in Bereiche einzelner Teile, die sich unterschiedlich zwischen Bildern bewegen. Wir demonstrieren hohe Segmentierungsgenauigkeit und Genauigkeit in der Bewegungsschätzung unter Echtzeitbedingungen für die Verarbeitung. Schließlich entwickeln wir ein Verfahren für die Wahrnehmung von nicht-rigiden Deformationen zwischen zwei MRSMaps. Auch hier nutzen wir die multi-resolutionale Struktur in den Karten für ein effizientes Registrieren von grob zu fein. Wir schlagen Methoden vor, um aus den geschätzten Deformationen die lokale Bewegung zwischen den Bildern zu berechnen. Wir evaluieren Genauigkeit und Effizienz des Registrierungsverfahrens. Der zweite Teil dieser Arbeit widmet sich der Verwendung unserer Kartenrepräsentation und Registrierungsmethoden für die Wahrnehmung von Szenen und Objekten. Wir verwenden MRSMaps und unsere rigide Registrierungsmethode, um dichte 3D Modelle von Szenen und Objekten zu lernen. Die räumlichen Beziehungen zwischen Schlüsselansichten, die wir durch Registrierung schätzen, werden in einem Simultanen Lokalisierungs- und Kartierungsverfahren (engl. simultaneous localization and mapping, SLAM) gegeneinander abgewogen, um die Blickposen der Schlüsselansichten zu schätzen. Für das Verfolgen der Kamerapose bezüglich der Modelle in Echtzeit, kombinieren wir die Genauigkeit unserer Registrierung mit der Robustheit von Partikelfiltern. Zu Beginn der Posenverfolgung, oder wenn das Objekt aufgrund von Verdeckungen oder extremen Bewegungen nicht weiter verfolgt werden konnte, initialisieren wir das Filter durch Objektdetektion. Anschließend wenden wir unsere erweiterten Registrierungsverfahren für die Wahrnehmung in nicht-rigiden Szenen und für die Übertragung von Objekthandhabungsfähigkeiten von Robotern an. Wir erweitern unseren rigiden Kartierungsansatz auf dynamische Szenen, in denen sich rigide Teile bewegen. Die Bewegungssegmente in Schlüsselansichten werden zueinander in Bezug gesetzt, um Äquivalenz- und Teilebeziehungen von Objekten probabilistisch zu inferieren, denen die Segmente entsprechen. Auch hier liefert unsere Registrierungsmethode die Bewegung der Kamera bezüglich der Objekte, die wir in einem SLAM Verfahren optimieren. Aus diesen Blickposen wiederum können wir die Bewegungssegmente in dichten Objektmodellen vereinen. Objekte einer Klasse teilen oft eine gemeinsame Topologie von funktionalen Elementen, die durch Formkorrespondenzen ermittelt werden kann. Wir verwenden unsere deformierbare Registrierung, um solche Korrespondenzen zu finden und die Handhabung eines Objektes durch einen Roboter auf neue Objektinstanzen derselben Klasse zu übertragen. Schließlich entwickeln wir einen echtzeitfähigen Ansatz, der Kategorien von Objekten in RGB-D Bildern erkennt und segmentiert. Die Segmentierung basiert auf Ensemblen randomisierter Entscheidungsbäume, die Geometrie- und Texturmerkmale zur Klassifikation verwenden. Wir fusionieren Segmentierungen von Einzelbildern einer Szene aus mehreren Ansichten in einer semantischen Objektklassenkarte mit Hilfe unseres SLAM-Verfahrens. Die vorgestellten Methoden werden auf öffentlich verfügbaren Vergleichsdatensätzen und eigenen Datensätzen evaluiert. Einige unserer Ansätze wurden auch in integrierten Robotersystemen für mobile Objekthantierungsaufgaben öffentlich demonstriert. Sie waren ein wichtiger Bestandteil für das Gewinnen der RoboCup-Roboterwettbewerbe in der RoboCup@Home Liga in den Jahren 2011, 2012 und 2013

Groupwise non-rigid registration for automatic construction of appearance models of the human craniofacial complex for analysis, synthesis and simulation

Finally, a novel application of 3D appearance modelling is proposed: a faster than real-time algorithm for statistically constrained quasi-mechanical simulation. Experiments demonstrate superior realism, achieved in the proposed method by employing statistical appearance models to drive the simulation, in comparison with the comparable state-of-the-art quasi-mechanical approaches

Real Time Sequential Non Rigid Structure from motion using a single camera

En la actualidad las aplicaciones que basan su funcionamiento en una correcta localización y reconstrucción dentro de un entorno real en 3D han experimentado un gran interés en los últimos años, tanto por la comunidad investigadora como por la industrial. Estas aplicaciones varían desde la realidad aumentada, la robótica, la simulación, los videojuegos, etc. Dependiendo de la aplicación y del nivel de detalle de la reconstrucción, se emplean diversos dispositivos, algunos específicos, más complejos y caros como las cámaras estéreo, cámara y profundidad (RGBD) con Luz estructurada y Time of Flight (ToF), así como láser y otros más avanzados. Para aplicaciones sencillas es suficiente con dispositivos de uso común, como los smartphones, en los que aplicando técnicas de visión artificial, se pueden obtener modelos 3D del entorno para, en el caso de la realidad aumentada, mostrar información aumentada en la ubicación seleccionada.En robótica, la localización y generación simultáneas de un mapa del entorno en 3D es una tarea fundamental para conseguir la navegación autónoma. Este problema se conoce en el estado del arte como Simultaneous Localization And Mapping (SLAM) o Structure from Motion (SfM). Para la aplicación de estas técnicas, el objeto no ha de cambiar su forma a lo largo del tiempo. La reconstrucción es unívoca salvo factor de escala en captura monocular sin referencia. Si la condición de rigidez no se cumple, es porque la forma del objeto cambia a lo largo del tiempo. El problema sería equivalente a realizar una reconstrucción por fotograma, lo cual no se puede hacer de manera directa, puesto que diferentes formas, combinadas con diferentes poses de cámara pueden dar proyecciones similares. Es por esto que el campo de la reconstrucción de objetos deformables es todavía un área en desarrollo. Los métodos de SfM se han adaptado aplicando modelos físicos, restricciones temporales, espaciales, geométricas o de otros tipos para reducir la ambigüedad en las soluciones, naciendo así las técnicas conocidas como Non-Rigid SfM (NRSfM).En esta tesis se propone partir de una técnica de reconstrucción rígida bien conocida en el estado del arte como es PTAM (Parallel Tracking and Mapping) y adaptarla para incluir técnicas de NRSfM, basadas en modelo de bases lineales para estimar las deformaciones del objeto modelado dinámicamente y aplicar restricciones temporales y espaciales para mejorar las reconstrucciones, además de ir adaptándose a cambios de deformación que se presenten en la secuencia. Para ello, hay que realizar cambios de manera que cada uno de sus hilos de ejecución procesen datos no rígidos.El hilo encargado del seguimiento ya realizaba seguimiento basado en un mapa de puntos 3D, proporcionado a priori. La modificación más importante aquí es la integración de un modelo de deformación lineal para que se realice el cálculo de la deformación del objeto en tiempo real, asumiendo fijas las formas básicas de deformación. El cálculo de la pose de la cámara está basado en el sistema de estimación rígido, por lo que la estimación de pose y coeficientes de deformación se hace de manera alternada usando el algoritmo E-M (Expectation-Maximization). También, se imponen restricciones temporales y de forma para restringir las ambigüedades inherentes en las soluciones y mejorar la calidad de la estimación 3D.Respecto al hilo que gestiona el mapa, se actualiza en función del tiempo para que sea capaz de mejorar las bases de deformación cuando éstas no son capaces de explicar las formas que se ven en las imágenes actuales. Para ello, se sustituye la optimización de modelo rígido incluida en este hilo por un método de procesamiento exhaustivo NRSfM, para mejorar las bases acorde a las imágenes con gran error de reconstrucción desde el hilo de seguimiento. Con esto, el modelo se consigue adaptar a nuevas deformaciones, permitiendo al sistema evolucionar y ser estable a largo plazo.A diferencia de una gran parte de los métodos de la literatura, el sistema propuesto aborda el problema de la proyección perspectiva de forma nativa, minimizando los problemas de ambigüedad y de distancia al objeto existente en la proyección ortográfica. El sistema propuesto maneja centenares de puntos y está preparado para cumplir con restricciones de tiempo real para su aplicación en sistemas con recursos hardware limitados

Motion Segmentation from Clustering of Sparse Point Features Using Spatially Constrained Mixture Models

Motion is one of the strongest cues available for segmentation. While motion segmentation finds wide ranging applications in object detection, tracking, surveillance, robotics, image and video compression, scene reconstruction, video editing, and so on, it faces various challenges such as accurate motion recovery from noisy data, varying complexity of the models required to describe the computed image motion, the dynamic nature of the scene that may include a large number of independently moving objects undergoing occlusions, and the need to make high-level decisions while dealing with long image sequences. Keeping the sparse point features as the pivotal point, this thesis presents three distinct approaches that address some of the above mentioned motion segmentation challenges. The first part deals with the detection and tracking of sparse point features in image sequences. A framework is proposed where point features can be tracked jointly. Traditionally, sparse features have been tracked independently of one another. Combining the ideas from Lucas-Kanade and Horn-Schunck, this thesis presents a technique in which the estimated motion of a feature is influenced by the motion of the neighboring features. The joint feature tracking algorithm leads to an improved tracking performance over the standard Lucas-Kanade based tracking approach, especially while tracking features in untextured regions. The second part is related to motion segmentation using sparse point feature trajectories. The approach utilizes a spatially constrained mixture model framework and a greedy EM algorithm to group point features. In contrast to previous work, the algorithm is incremental in nature and allows for an arbitrary number of objects traveling at different relative speeds to be segmented, thus eliminating the need for an explicit initialization of the number of groups. The primary parameter used by the algorithm is the amount of evidence that must be accumulated before the features are grouped. A statistical goodness-of-fit test monitors the change in the motion parameters of a group over time in order to automatically update the reference frame. The approach works in real time and is able to segment various challenging sequences captured from still and moving cameras that contain multiple independently moving objects and motion blur. The third part of this thesis deals with the use of specialized models for motion segmentation. The articulated human motion is chosen as a representative example that requires a complex model to be accurately described. A motion-based approach for segmentation, tracking, and pose estimation of articulated bodies is presented. The human body is represented using the trajectories of a number of sparse points. A novel motion descriptor encodes the spatial relationships of the motion vectors representing various parts of the person and can discriminate between articulated and non-articulated motions, as well as between various pose and view angles. Furthermore, a nearest neighbor search for the closest motion descriptor from the labeled training data consisting of the human gait cycle in multiple views is performed, and this distance is fed to a Hidden Markov Model defined over multiple poses and viewpoints to obtain temporally consistent pose estimates. Experimental results on various sequences of walking subjects with multiple viewpoints and scale demonstrate the effectiveness of the approach. In particular, the purely motion based approach is able to track people in night-time sequences, even when the appearance based cues are not available. Finally, an application of image segmentation is presented in the context of iris segmentation. Iris is a widely used biometric for recognition and is known to be highly accurate if the segmentation of the iris region is near perfect. Non-ideal situations arise when the iris undergoes occlusion by eyelashes or eyelids, or the overall quality of the segmented iris is affected by illumination changes, or due to out-of-plane rotation of the eye. The proposed iris segmentation approach combines the appearance and the geometry of the eye to segment iris regions from non-ideal images. The image is modeled as a Markov random field, and a graph cuts based energy minimization algorithm is applied to label the pixels either as eyelashes, pupil, iris, or background using texture and image intensity information. The iris shape is modeled as an ellipse and is used to refine the pixel based segmentation. The results indicate the effectiveness of the segmentation algorithm in handling non-ideal iris images

Bridging the gap between reconstruction and synthesis

Aplicat embargament des de la data de defensa fins el 15 de gener de 20223D reconstruction and image synthesis are two of the main pillars in computer vision. Early works focused on simple tasks such as multi-view reconstruction and texture synthesis. With the spur of Deep Learning, the field has rapidly progressed, making it possible to achieve more complex and high level tasks. For example, the 3D reconstruction results of traditional multi-view approaches are currently obtained with single view methods. Similarly, early pattern based texture synthesis works have resulted in techniques that allow generating novel high-resolution images. In this thesis we have developed a hierarchy of tools that cover all these range of problems, lying at the intersection of computer vision, graphics and machine learning. We tackle the problem of 3D reconstruction and synthesis in the wild. Importantly, we advocate for a paradigm in which not everything should be learned. Instead of applying Deep Learning naively we propose novel representations, layers and architectures that directly embed prior 3D geometric knowledge for the task of 3D reconstruction and synthesis. We apply these techniques to problems including scene/person reconstruction and photo-realistic rendering. We first address methods to reconstruct a scene and the clothed people in it while estimating the camera position. Then, we tackle image and video synthesis for clothed people in the wild. Finally, we bridge the gap between reconstruction and synthesis under the umbrella of a unique novel formulation. Extensive experiments conducted along this thesis show that the proposed techniques improve the performance of Deep Learning models in terms of the quality of the reconstructed 3D shapes / synthesised images, while reducing the amount of supervision and training data required to train them. In summary, we provide a variety of low, mid and high level algorithms that can be used to incorporate prior knowledge into different stages of the Deep Learning pipeline and improve performance in tasks of 3D reconstruction and image synthesis.La reconstrucció 3D i la síntesi d'imatges són dos dels pilars fonamentals en visió per computador. Els estudis previs es centren en tasques senzilles com la reconstrucció amb informació multi-càmera i la síntesi de textures. Amb l'aparició del "Deep Learning", aquest camp ha progressat ràpidament, fent possible assolir tasques molt més complexes. Per exemple, per obtenir una reconstrucció 3D, tradicionalment s'utilitzaven mètodes multi-càmera, en canvi ara, es poden obtenir a partir d'una sola imatge. De la mateixa manera, els primers treballs de síntesi de textures basats en patrons han donat lloc a tècniques que permeten generar noves imatges completes en alta resolució. En aquesta tesi, hem desenvolupat una sèrie d'eines que cobreixen tot aquest ventall de problemes, situats en la intersecció entre la visió per computador, els gràfics i l'aprenentatge automàtic. Abordem el problema de la reconstrucció i la síntesi 3D en el món real. És important destacar que defensem un paradigma on no tot s'ha d'aprendre. Enlloc d'aplicar el "Deep Learning" de forma naïve, proposem representacions novedoses i arquitectures que incorporen directament els coneixements geomètrics ja existents per a aconseguir la reconstrucció 3D i la síntesi d'imatges. Nosaltres apliquem aquestes tècniques a problemes com ara la reconstrucció d'escenes/persones i a la renderització d'imatges fotorealistes. Primer abordem els mètodes per reconstruir una escena, les persones vestides que hi ha i la posició de la càmera. A continuació, abordem la síntesi d'imatges i vídeos de persones vestides en situacions quotidianes. I finalment, aconseguim, a través d'una nova formulació única, connectar la reconstrucció amb la síntesi. Els experiments realitzats al llarg d'aquesta tesi demostren que les tècniques proposades milloren el rendiment dels models de "Deepp Learning" pel que fa a la qualitat de les reconstruccions i les imatges sintetitzades alhora que redueixen la quantitat de dades necessàries per entrenar-los. En resum, proporcionem una varietat d'algoritmes de baix, mitjà i alt nivell que es poden utilitzar per incorporar els coneixements previs a les diferents etapes del "Deep Learning" i millorar el rendiment en tasques de reconstrucció 3D i síntesi d'imatges.Postprint (published version

Computational Anatomy for Multi-Organ Analysis in Medical Imaging: A Review

The medical image analysis field has traditionally been focused on the development of organ-, and disease-specific methods. Recently, the interest in the development of more 20 comprehensive computational anatomical models has grown, leading to the creation of multi-organ models. Multi-organ approaches, unlike traditional organ-specific strategies, incorporate inter-organ relations into the model, thus leading to a more accurate representation of the complex human anatomy. Inter-organ relations are not only spatial, but also functional and physiological. Over the years, the strategies 25 proposed to efficiently model multi-organ structures have evolved from the simple global modeling, to more sophisticated approaches such as sequential, hierarchical, or machine learning-based models. In this paper, we present a review of the state of the art on multi-organ analysis and associated computation anatomy methodology. The manuscript follows a methodology-based classification of the different techniques 30 available for the analysis of multi-organs and multi-anatomical structures, from techniques using point distribution models to the most recent deep learning-based approaches. With more than 300 papers included in this review, we reflect on the trends and challenges of the field of computational anatomy, the particularities of each anatomical region, and the potential of multi-organ analysis to increase the impact of 35 medical imaging applications on the future of healthcare.Comment: Paper under revie

Single-View 3D Reconstruction of Animals

Humans have a remarkable ability to infer the 3D shape of objects from just a single image. Even for complex and non-rigid objects like people and animals, from just a single picture we can say much about its 3D shape, configuration and even the viewpoint that the photo was taken from. Today, the same cannot be said for computers – the existing solutions are limited, particularly for highly articulated and deformable objects. Hence, the purpose of this thesis is to develop methods for single-view 3D reconstruction of non-rigid objects, specifically for people and animals. Our goal is to recover a full 3D surface model of these objects from a single unconstrained image. The ability to do so, even with some user interaction, will have a profound impact in AR/VR and the entertainment industry. Immediate applications are virtual avatars and pets, virtual clothes fitting, immersive games, as well as applications in biology, neuroscience, ecology, and farming. However, this is a challenging problem because these objects can appear in many different forms. This thesis begins by providing the first fully automatic solution for recovering a 3D mesh of a human body from a single image. Our solution follows the classical paradigm of bottom-up estimation followed by top-down verification. The key is to solve for the mostly likely 3D model that explains the image observations by using powerful priors. The rest of the thesis explores how to extend a similar approach for other animals. Doing so reveals novel challenges whose common thread is the lack of specialized data. For solving the bottom-up estimation problem well, current methods rely on the availability of human supervision in the form of 2D part annotations. However, these annotations do not exist in the same scale for animals. We deal with this problem by means of data synthesis for the case of fine-grained categories such as bird species. There is also little work that systematically addresses the 3D scanning of animals, which almost all prior works require for learning a deformable 3D model. We propose a solution to learn a 3D deformable model from a set of annotated 2D images with a template 3D mesh and from a few set of 3D toy figurine scans. We show results on birds, house cats, horses, cows, dogs, big cats, and even hippos. This thesis makes steps towards a fully automatic system for single-view 3D reconstruction of animals. We hope this work inspires more future research in this direction