Data compression techniques applied to high resolution high frame rate video technology

An investigation is presented of video data compression applied to microgravity space experiments using High Resolution High Frame Rate Video Technology (HHVT). An extensive survey of methods of video data compression, described in the open literature, was conducted. The survey examines compression methods employing digital computing. The results of the survey are presented. They include a description of each method and assessment of image degradation and video data parameters. An assessment is made of present and near term future technology for implementation of video data compression in high speed imaging system. Results of the assessment are discussed and summarized. The results of a study of a baseline HHVT video system, and approaches for implementation of video data compression, are presented. Case studies of three microgravity experiments are presented and specific compression techniques and implementations are recommended

A preliminary experiment definition for video landmark acquisition and tracking

Six scientific objectives/experiments were derived which consisted of agriculture/forestry/range resources, land use, geology/mineral resources, water resources, marine resources and environmental surveys. Computer calculations were then made of the spectral radiance signature of each of 25 candidate targets as seen by a satellite sensor system. An imaging system capable of recognizing, acquiring and tracking specific generic type surface features was defined. A preliminary experiment definition and design of a video Landmark Acquisition and Tracking system is given. This device will search a 10-mile swath while orbiting the earth, looking for land/water interfaces such as coastlines and rivers

Computational intelligence approaches to robotics, automation, and control [Volume guest editors]

No abstract available

ENERGY-EFFICIENT LIGHTWEIGHT ALGORITHMS FOR EMBEDDED SMART CAMERAS: DESIGN, IMPLEMENTATION AND PERFORMANCE ANALYSIS

An embedded smart camera is a stand-alone unit that not only captures images, but also includes a processor, memory and communication interface. Battery-powered, embedded smart cameras introduce many additional challenges since they have very limited resources, such as energy, processing power and memory. When camera sensors are added to an embedded system, the problem of limited resources becomes even more pronounced. Hence, computer vision algorithms running on these camera boards should be light-weight and efficient. This thesis is about designing and developing computer vision algorithms, which are aware and successfully overcome the limitations of embedded platforms (in terms of power consumption and memory usage). Particularly, we are interested in object detection and tracking methodologies and the impact of them on the performance and battery life of the CITRIC camera (embedded smart camera employed in this research). This thesis aims to prolong the life time of the Embedded Smart platform, without affecting the reliability of the system during surveillance tasks. Therefore, the reader is walked through the whole designing process, from the development and simulation, followed by the implementation and optimization, to the testing and performance analysis. The work presented in this thesis carries out not only software optimization, but also hardware-level operations during the stages of object detection and tracking. The performance of the algorithms introduced in this thesis are comparable to state-of-the-art object detection and tracking methods, such as Mixture of Gaussians, Eigen segmentation, color and coordinate tracking. Unlike the traditional methods, the newly-designed algorithms present notable reduction of the memory requirements, as well as the reduction of memory accesses per pixel. To accomplish the proposed goals, this work attempts to interconnect different levels of the embedded system architecture to make the platform more efficient in terms of energy and resource savings. Thus, the algorithms proposed are optimized at the API, middleware, and hardware levels to access the pixel information of the CMOS sensor directly. Only the required pixels are acquired in order to reduce the unnecessary communications overhead. Experimental results show that when exploiting the architecture capabilities of an embedded platform, 41.24% decrease in energy consumption, and 107.2% increase in battery-life can be accomplished. Compared to traditional object detection and tracking methods, the proposed work provides an additional 8 hours of continuous processing on 4 AA batteries, increasing the lifetime of the camera to 15.5 hours

Vision Science and Technology at NASA: Results of a Workshop

A broad review is given of vision science and technology within NASA. The subject is defined and its applications in both NASA and the nation at large are noted. A survey of current NASA efforts is given, noting strengths and weaknesses of the NASA program

A sub-mW IoT-endnode for always-on visual monitoring and smart triggering

This work presents a fully-programmable Internet of Things (IoT) visual sensing node that targets sub-mW power consumption in always-on monitoring scenarios. The system features a spatial-contrast $128\mathrm{x}64$ binary pixel imager with focal-plane processing. The sensor, when working at its lowest power mode ($10\mu W$ at 10 fps), provides as output the number of changed pixels. Based on this information, a dedicated camera interface, implemented on a low-power FPGA, wakes up an ultra-low-power parallel processing unit to extract context-aware visual information. We evaluate the smart sensor on three always-on visual triggering application scenarios. Triggering accuracy comparable to RGB image sensors is achieved at nominal lighting conditions, while consuming an average power between $193\mu W$ and $277\mu W$, depending on context activity. The digital sub-system is extremely flexible, thanks to a fully-programmable digital signal processing engine, but still achieves 19x lower power consumption compared to MCU-based cameras with significantly lower on-board computing capabilities.Comment: 11 pages, 9 figures, submitteted to IEEE IoT Journa

Digital implementation of the cellular sensor-computers

Two different kinds of cellular sensor-processor architectures are used nowadays in various applications. The first is the traditional sensor-processor architecture, where the sensor and the processor arrays are mapped into each other. The second is the foveal architecture, in which a small active fovea is navigating in a large sensor array. This second architecture is introduced and compared here. Both of these architectures can be implemented with analog and digital processor arrays. The efficiency of the different implementation types, depending on the used CMOS technology, is analyzed. It turned out, that the finer the technology is, the better to use digital implementation rather than analog