Successive interference cancellation aided sphere decoder for multi-input multi-output systems

In this paper, sphere decoding algorithms are proposed for both hard detection and soft processing in multi-input multi-output (MIMO) systems. Both algorithms are based on the complex tree structure to reduce the complexity of searching the unique minimum Euclidean distance and multiple Euclidean distances, and obtain the corresponding transmit symbol vectors. The novel complex hard sphere decoder for MIMO detection is presented first, and then the soft processing of a novel sphere decoding algorithm for list generation is discussed. The performance and complexity of the proposed techniques are demonstrated via simulations in terms of bit error rate (BER), the number of nodes accessed and floating-point operations (FLOPS)

MIMOシステムにおける格子基底縮小を用いた信号検出法及びその応用に関する研究

Multiple-input multiple-output (MIMO) technology has attracted attention in wireless communications, since it provides signi cant increases in data throughput and the high spectral efficiency. MIMO systems employ multiple antennas at both ends of the wireless link, and hence can increase the data rate by transmitting multiple data streams. To exploit the potential gains o ered by MIMO, signal processing involved in a MIMO receiver requires a large computational complexity in order to achieve the optimal performance. In MIMO systems, it is usually required to detect signals jointly as multiple signals are transmitted through multiple signal paths between the transmitter and the receiver. This joint detection becomes the MIMO detection. The maximum likelihood (ML) detection (MLD) is known as the optimal detector in terms of minimizing bit error rate (BER). However, the complexity of MLD obstructs its practical implementation. The common linear detection such as zero-forcing (ZF) or minimum mean squared error (MMSE) o ers a remarkable complexity reduction with performance loss. The non-linear detection, e.g. the successive interference cancellation (SIC), detects each symbol sequentially withthe aid of cancellation operations which remove the interferences from the received signal. The BER performance is improved by using the SIC, but is still inferior to that of the ML detector with low complexity. Numerous suboptimal detection techniques have been proposed to approximately approach the ML performance with relatively lower complexity, such as sphere detection (SD) and QRM-MLD. To look for suboptimal detection algorithm with near optimal performance and a ordable complexity costs for MIMO gains faces a major challenge. Lattice-reduction (LR) is a promising technique to improve the performance of MIMO detection. The LR makes the column vectors of the channel state information (CSI) matrix close to mutually orthogonal. The following signal estimation of the transmitted signal applies the reduced lattice basis instead of the original lattice basis. The most popular LR algorithm is the well-known LLL algorithm, introduced by Lenstra, Lenstra, and Lov asz. Using this algorithm, the LR aided (LRA) detector achieves more reliable signal estimation and hence good BER performance. Combining the LLL algorithm with the conventional linear detection of ZF or MMSE can further improve the BER performance in MIMO systems, especially the LR-MMSE detection. The non-linear detection i.e. SIC based on LR (LR-SIC) is selected from many detection methods since it features the good BER performance. And ordering SIC based on LR (LR-OSIC) can further improve the BER performance with the costs of the implementation of the ordering but requires high computational complexity. In addition, list detection can also obtain much better performance but with a little high computational cost in terms of the list of candidates. However, the expected performance of the several detections isnot satis ed directly like the ML detector, in particular for the high modulation order or the large size MIMO system. This thesis presents our studies about lattice reduction aided detection and its application in MIMO system. Our studies focus on the evaluation of BER performance and the computational complexity. On the hand, we improve the detection algorithms to achieve the near-ML BER performance. On the other hand, we reduce the complexity of the useless computation, such as the exhaustive tree search. We mainly solve three problems existed in the conventional detection methods as - The MLD based on QR decomposition and M-algorithm (QRMMLD) is one solution to relatively reduce the complexity while retaining the ML performance. The number of M in the conventional QRM-MLD is de ned as the number of the survived branches in each detection layer of the tree search, which is a tradeo between complexity and performance. Furthermore, the value of M should be large enough to ensure that the correct symbols exist in the survived branches under the ill-conditioned channel, in particular for the large size MIMO system and the high modulation order. Hence the conventional QRM-MLD still has the problem of high complexity in the better-conditioned channel. - For the LRA MIMO detection, the detection errors are mainly generated from the channel noise and the quantization errors in the signal estimation stage. The quantization step applies the simple rounding operation, which often leads to the quantization error. If this error occurs in a row of the transmit signal, it has to propagate to many symbols in the subsequent signal estimation and result in degrading the BER performance. The conventional LRA MIMO detection has the quantization problem, which obtains less reliable signal estimation and leads to the BER performance loss. - Ordering the column vectors of the LR-reduced channel matrix brings large improvement on the BER performance of the LRSIC due to decreasing the error propagation. However, the improvement of the LR-OSIC is not su cient to approach the ML performance in the large size MIMO system, such as 8 8 MIMO system. Hence, the LR-OSIC detection cannot achieve the near-ML BER performance in the large size of MIMO system. The aim of our researches focuses on the detection algorithm, which provides near-ML BER performance with very low additional complexity. Therefore, we have produced various new results on low complexity MIMO detection with the ideas of lattice reduction aided detection and its application even for large size MIMO system and high modulation order. Our works are to solve the problems in the conventional MIMO detections and to improve the detection algorithms in the signal estimation. As for the future research, these detection schemes combined with the encoding technique lead to interesting and useful applications in the practical MIMO system or massive MIMO.電気通信大学201

Convolutional Coded Generalized Direct Sequence Spread Spectrum

In this thesis we investigate the worst-case performance of coded ordinary and coded generalized direct sequence spread spectrum (DSSS) systems in a communication channel corrupted by an unknown and arbitrary interfering signal of bounded power. We consider convolutional codes with Viterbi decoding in order to compare the performance of coded ordinary and coded generalized DSSS systems. For the generalized DSSS system, we use a pulse stream of +1,-1 and 0 as the spreading sequence, which is different from ordinary DSSS system which uses the typical sequence with pulse values of +1 and -1. A C program for performing Monte-Carlo simulations is written in order to evaluate and compare the performance of coded ordinary and coded generalized DSSS systems. Plots of the worst-case error probability versus signal-to-interference ratio are presented for different code rates and constraint lengths of the convolutional code. Simulation results of the worst-case performance of ordinary and generalized DSSS show that generalized DSSS consistently performs appreciably better than ordinary DSSS. Simulation is performed for various code rates, various constraint lengths of the convolutional code and various lengths of the convolutional interleaver. Over all these simulations, it is observed that the difference between ordinary and generalized DSSS gets more pronounced as the channel gets wors

Convolutional Coded Generalized Direct Sequence Spread Spectrum

In this thesis we investigate the worst-case performance of coded ordinary and coded generalized direct sequence spread spectrum (DSSS) systems in a communication channel corrupted by an unknown and arbitrary interfering signal of bounded power. We consider convolutional codes with Viterbi decoding in order to compare the performance of coded ordinary and coded generalized DSSS systems. For the generalized DSSS system, we use a pulse stream of +1,-1 and 0 as the spreading sequence, which is different from ordinary DSSS system which uses the typical sequence with pulse values of +1 and -1. A C program for performing Monte-Carlo simulations is written in order to evaluate and compare the performance of coded ordinary and coded generalized DSSS systems. Plots of the worst-case error probability versus signal-to-interference ratio are presented for different code rates and constraint lengths of the convolutional code. Simulation results of the worst-case performance of ordinary and generalized DSSS show that generalized DSSS consistently performs appreciably better than ordinary DSSS. Simulation is performed for various code rates, various constraint lengths of the convolutional code and various lengths of the convolutional interleaver. Over all these simulations, it is observed that the difference between ordinary and generalized DSSS gets more pronounced as the channel gets wors

Convolutional Coded Generalized Direct Sequence Spread Spectrum

In this thesis we investigate the worst-case performance of coded ordinary and coded generalized direct sequence spread spectrum (DSSS) systems in a communication channel corrupted by an unknown and arbitrary interfering signal of bounded power. We consider convolutional codes with Viterbi decoding in order to compare the performance of coded ordinary and coded generalized DSSS systems. For the generalized DSSS system, we use a pulse stream of +1,-1 and 0 as the spreading sequence, which is different from ordinary DSSS system which uses the typical sequence with pulse values of +1 and -1. A C program for performing Monte-Carlo simulations is written in order to evaluate and compare the performance of coded ordinary and coded generalized DSSS systems. Plots of the worst-case error probability versus signal-to-interference ratio are presented for different code rates and constraint lengths of the convolutional code. Simulation results of the worst-case performance of ordinary and generalized DSSS show that generalized DSSS consistently performs appreciably better than ordinary DSSS. Simulation is performed for various code rates, various constraint lengths of the convolutional code and various lengths of the convolutional interleaver. Over all these simulations, it is observed that the difference between ordinary and generalized DSSS gets more pronounced as the channel gets wors

Near ML detection using Dijkstra's algorithm with bounded list size over MIMO channels

We propose Dijkstra's algorithm with bounded list size after QR decomposition for decreasing the computational complexity of near maximum-likelihood (ML) detection of signals over multiple-input-multiple-output (MIMO) channels. After that, we compare the performances of proposed algorithm, QR decomposition M-algorithm (QRD-MLD), and its improvement. When the list size is set to achieve the almost same symbol error rate (SER) as the QRD-MLD, the proposed algorithm has smaller average computational complexity.Comment: 8 pages, two column, 14 figures, LaTeX2

Capacity -based parameter optimization of bandwidth constrained CPM

Continuous phase modulation (CPM) is an attractive modulation choice for bandwidth limited systems due to its small side lobes, fast spectral decay and the ability to be noncoherently detected. Furthermore, the constant envelope property of CPM permits highly power efficient amplification. The design of bit-interleaved coded continuous phase modulation is characterized by the code rate, modulation order, modulation index, and pulse shape. This dissertation outlines a methodology for determining the optimal values of these parameters under bandwidth and receiver complexity constraints. The cost function used to drive the optimization is the information-theoretic minimum ratio of energy-per-bit to noise-spectral density found by evaluating the constrained channel capacity. The capacity can be reliably estimated using Monte Carlo integration. A search for optimal parameters is conducted over a range of coded CPM parameters, bandwidth efficiencies, and channels. Results are presented for a system employing a trellis-based coherent detector. To constrain complexity and allow any modulation index to be considered, a soft output differential phase detector has also been developed.;Building upon the capacity results, extrinsic information transfer (EXIT) charts are used to analyze a system that iterates between demodulation and decoding. Convergence thresholds are determined for the iterative system for different outer convolutional codes, alphabet sizes, modulation indices and constellation mappings. These are used to identify the code and modulation parameters with the best energy efficiency at different spectral efficiencies for the AWGN channel. Finally, bit error rate curves are presented to corroborate the capacity and EXIT chart designs

Reduced Receivers for Faster-than-Nyquist Signaling and General Linear Channels

Fast and reliable data transmission together with high bandwidth efficiency are important design aspects in a modern digital communication system. Many different approaches exist but in this thesis bandwidth efficiency is obtained by increasing the data transmission rate with the faster-than-Nyquist (FTN) framework while keeping a fixed power spectral density (PSD). In FTN consecutive information carrying symbols can overlap in time and in that way introduce a controlled amount of intentional intersymbol interference (ISI). This technique was introduced already in 1975 by Mazo and has since then been extended in many directions. Since the ISI stemming from practical FTN signaling can be of significant duration, optimum detection with traditional methods is often prohibitively complex, and alternative equalization methods with acceptable complexity-performance tradeoffs are needed. The key objective of this thesis is therefore to design reduced-complexity receivers for FTN and general linear channels that achieve optimal or near-optimal performance. Although the performance of a detector can be measured by several means, this thesis is restricted to bit error rate (BER) and mutual information results. FTN signaling is applied in two ways: As a separate uncoded narrowband communication system or in a coded scenario consisting of a convolutional encoder, interleaver and the inner ISI mechanism in serial concatenation. Turbo equalization where soft information in the form of log likelihood ratios (LLRs) is exchanged between the equalizer and the decoder is a commonly used decoding technique for coded FTN signals. The first part of the thesis considers receivers and arising stability problems when working within the white noise constraint. New M-BCJR algorithms for turbo equalization are proposed and compared to reduced-trellis VA and BCJR benchmarks based on an offset label idea. By adding a third low-complexity M-BCJR recursion, LLR quality is improved for practical values of M. M here measures the reduced number of BCJR computations for each data symbol. An improvement of the minimum phase conversion that sharpens the focus of the ISI model energy is proposed. When combined with a delayed and slightly mismatched receiver, the decoding allows a smaller M without significant loss in BER. The second part analyzes the effect of the internal metric calculations on the performance of Forney- and Ungerboeck-based reduced-complexity equalizers of the M-algorithm type for both ISI and multiple-input multiple-output (MIMO) channels. Even though the final output of a full-complexity equalizer is identical for both models, the internal metric calculations are in general different. Hence, suboptimum methods need not produce the same final output. Additionally, new models working in between the two extremes are proposed and evaluated. Note that the choice of observation model does not impact the detection complexity as the underlying algorithm is unaltered. The last part of the thesis is devoted to a different complexity reducing approach. Optimal channel shortening detectors for linear channels are optimized from an information theoretical perspective. The achievable information rates of the shortened models as well as closed form expressions for all components of the optimal detector of the class are derived. The framework used in this thesis is more general than what has been previously used within the area

Low complexity MIMO detection algorithms and implementations

University of Minnesota Ph.D. dissertation. December 2014. Major: Electrical Engineering. Advisor: Gerald E. Sobelman. 1 computer file (PDF); ix, 111 pages.MIMO techniques use multiple antennas at both the transmitter and receiver sides to achieve diversity gain, multiplexing gain, or both. One of the key challenges in exploiting the potential of MIMO systems is to design high-throughput, low-complexity detection algorithms while achieving near-optimal performance. In this thesis, we design and optimize algorithms for MIMO detection and investigate the associated performance and FPGA implementation aspects.First, we study and optimize a detection algorithm developed by Shabany and Gulak for a K-Best based high throughput and low energy hard output MIMO detection and expand it to the complex domain. The new method uses simple lookup tables, and it is fully scalable for a wide range of K-values and constellation sizes. This technique reduces the computational complexity, without sacrificing performance and the complexity scales only sub-linearly with the constellation size. Second, we apply the bidirectional technique to trellis search and propose a high performance soft output bidirectional path preserving trellis search (PPTS) detector for MIMO systems. The comparative error analysis between single direction and bidirectional PPTS detectors is given. We demonstrate that the bidirectional PPTS detector can minimize the detection error. Next, we design a novel bidirectional processing algorithm for soft-output MIMO systems. It combines features from several types of fixed complexity tree search procedures. The proposed approach achieves a higher performance than previously proposed algorithms and has a comparable computational cost. Moreover, its parallel nature and fixed throughput characteristics make it attractive for very large scale integration (VLSI) implementation.Following that, we present a novel low-complexity hard output MIMO detection algorithm for LTE and WiFi applications. We provide a well-defined tradeoff between computational complexity and performance. The proposed algorithm uses a much smaller number of Euclidean distance (ED) calculations while attaining only a 0.5dB loss compared to maximum likelihood detection (MLD). A 3x3 MIMO system with a 16QAM detector architecture is designed, and the latency and hardware costs are estimated.Finally, we present a stochastic computing implementation of trigonometric and hyperbolic functions which can be used for QR decomposition and other wireless communications and signal processing applications

Design and Implementation of Efficient Algorithms for Wireless MIMO Communication Systems

En la última década, uno de los avances tecnológicos más importantes que han hecho culminar la nueva generación de banda ancha inalámbrica es la comunicación mediante sistemas de múltiples entradas y múltiples salidas (MIMO). Las tecnologías MIMO han sido adoptadas por muchos estándares inalámbricos tales como LTE, WiMAS y WLAN. Esto se debe principalmente a su capacidad de aumentar la máxima velocidad de transmisión , junto con la fiabilidad alcanzada y la cobertura de las comunicaciones inalámbricas actuales sin la necesidad de ancho de banda extra ni de potencia de transmisión adicional. Sin embargo, las ventajas proporcionadas por los sistemas MIMO se producen a expensas de un aumento sustancial del coste de implementación de múltiples antenas y de la complejidad del receptor, la cual tiene un gran impacto sobre el consumo de energía. Por esta razón, el diseño de receptores de baja complejidad es un tema importante que se abordará a lo largo de esta tesis. En primer lugar, se investiga el uso de técnicas de preprocesado de la matriz de canal MIMO bien para disminuir el coste computacional de decodificadores óptimos o bien para mejorar las prestaciones de detectores subóptimos lineales, SIC o de búsqueda en árbol. Se presenta una descripción detallada de dos técnicas de preprocesado ampliamente utilizadas: el método de Lenstra, Lenstra, Lovasz (LLL) para lattice reduction (LR) y el algorimo VBLAST ZF-DFE. Tanto la complejidad como las prestaciones de ambos métodos se han evaluado y comparado entre sí. Además, se propone una implementación de bajo coste del algoritmo VBLAST ZF-DFE, la cual se incluye en la evaluación. En segundo lugar, se ha desarrollado un detector MIMO basado en búsqueda en árbol de baja complejidad, denominado detector K-Best de amplitud variable (VB K-Best). La idea principal de este método es aprovechar el impacto del número de condición de la matriz de canal sobre la detección de datos con el fin de disminuir la complejidad de los sistemasRoger Varea, S. (2012). Design and Implementation of Efficient Algorithms for Wireless MIMO Communication Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/16562Palanci