Fiabilisation des transmissions dans les réseaux de capteurs sans fils

Over the past decades, we have witnessed a proliferation of potential application domainsfor wireless sensor networks (WSN). A comprehensive number of new services such asenvironment monitoring, target tracking, military surveillance and healthcare applicationshave arisen. These networked sensors are usually deployed randomly and left unattendedto perform their mission properly and efficiently. Meanwhile, sensors have to operate ina constrained environment with functional and operational challenges mainly related toresource limitations (energy supply, scarce computational abilities...) and to the noisyreal world of deployment. This harsh environment can cause packet loss or node failurewhich hamper the network activity. Thus, continuous delivery of data requires reliabledata transmission and adaptability to the dynamic environment. Ensuring network reliabilityis consequently a key concern in WSNs and it is even more important in emergencyapplication such disaster management application where reliable data delivery is the keysuccess factor. The main objective of this thesis is to design a reliable end to end solution for data transmission fulfilling the requirements of the constrained WSNs. We tackle two design issues namely recovery from node failure and packet losses and propose solutions to enhance the network reliability. We start by studying WSNs features with a focus on technical challenges and techniques of reliability in order to identify the open issues. Based on this study, we propose a scalable and distributed approach for network recovery from nodefailures in WSNs called CoMN2. Then, we present a lightweight mechanism for packetloss recovery and route quality awareness in WSNs called AJIA. This protocol exploitsthe overhearing feature characterizing the wireless channels as an implicit acknowledgment(ACK) mechanism. In addition, the protocol allows for an adaptive selection of therouting path by achieving required retransmissions on the most reliable link. We provethat AJIA outperforms its competitor AODV in term of delivery ratio in different channelconditions. Thereafter, we present ARRP, a variant of AJIA, combining the strengthsof retransmissions, node collaboration and Forward Error Correction (FEC) in order toprovide a reliable packet loss recovery scheme. We verify the efficiency of ARRP throughextensive simulations which proved its high reliability in comparison to its competitor.Vu les perspectives qu'ils offrent, les réseaux de capteur sans fil (RCSF) ont perçu un grand engouement de la part de la communauté de recherche ces dernières années. Les RCSF couvrent une large gamme d'applications variant du contrôle d'environnement, le pistage de cible aux applications de santé. Les RCSFs sont souvent déployés aléatoirement. Ce dispersement des capteurs nécessite que les protocoles de transmission utilisés soient résistants aux conditions environnementales (fortes chaleurs ou pluies par exemple) et aux limitations de ressources des nœuds capteurs. En effet, la perte de plusieurs nœuds capteurs peut engendrer la perte de communication entre les différentes entités. Ces limitations peuvent causer la perte des paquets transmis ce qui entrave l'activité du réseau. Par conséquent, il est important d'assurer la fiabilité des transmissions de données dans les RCSF d'autant plus pour les applications critiques comme la détection d'incendies. Dans cette thèse, nous proposons une solution complète de transmission de données dans les RCSF répondant aux exigences et contraintes de ce type de réseau. Dans un premier temps, nous étudions les contraintes et les challenges liés à la fiabilisation des transmissions dans les RCSFs et nous examinons les travaux proposés dans la littérature. Suite à cette étude nous proposons COMN2, une approche distribuée et scalable permettant de faire face à la défaillance des nœuds. Ensuite, nous proposons un mécanisme de contrôle d'erreur minimisant la perte de paquets et proposant un routage adaptatif en fonction de la qualité du lien. Cette solution est basée sur des acquittements implicites (overhearing) pour la détection des pertes des paquets. Nous proposons ensuite ARRP une variante de AJIA combinant les avantages des retransmissions, de la collaboration des nœuds et des FEC. Enfin, nous simulons ces différentes solutions et vérifions leurs performances par rapport à leurs concurrents de l'état de l'art

A wireless sensor network for vineyard management in Sicily (Italy)

Wine quality depends on many factors, such as the choice of variety, stock, training system, pruning as well as environmental parameters and cultivation techniques performed in the vineyard.  Monitoring the micro-climate of grapevine allows to conveniently perform the most important cultivation techniques (soil management, pesticide treatments, green pruning, harvest) thus reducing the operating costs of the vineyard, and increasing the overall quality of the grapes.  The aim of the present study is to monitor the micro-climate of grapevine in order to control spring period hazards, to reduce the operating costs of the vineyard and to increase the quality of grapes.  For this purpose a Wireless Sensor Network was used, and a comparison was performed between the data measured by wireless sensors and data provided by a fixed meteorological station of the local government agency (SIAS - Regione Siciliana).  The results obtained here showed that, with reference to temperature, the data measured by wireless sensors are considerable different from the data of SIAS measuring station especially for temperatures above 20°C.  With reference to relative humidity, there are no differences between the two types of sensors.  Our study showed that the microclimate of the vineyard may be considerably different from the climate of the macro-area closest to the plot.  Monitoring the micro-climate may thus be crucial as it may represent the key to a rational management of the vineyard, also with regard to a reduction of the costs of certain cultural operations.   Keywords: vineyard, temperature, relative humidity, Wireless Sensor Network (WSN

Adaptive Reliable Routing Protocol for Wireless Sensor Networks

International audienceMany Wireless Sensor Networks (WSN) applications success is contingent upon the reliable delivery of high-priority events from many scattered sensors to one or more sink nodes. In particular, WSN has to be self-adaptive and resilient to errors by providing efficient mechanisms for information distribution especially in the multi-hop scenario. To meet the stringent requirement of reliably transmitting data, we propose a lightweight and energy-efficient joint mechanism for packet loss recovery and route quality awareness in WSNs. In this protocol, we use the overhearing feature characterizing the wireless channels as an implicit acknowledgment (ACK) mechanism. In addition, the protocol allows for an adaptive selection of the routing path, based on a collective cooperation within neighborhood

New Architectures for ubiquitous networks : use and adaptation of internet protocols over wireless sensor networks

This thesis focuses on the study of low-resource demanding protocols, communication techniques and software solutions to evaluate, optimise and implement Web service in WSNs. We start analysing the Web service architectures in order to choose the most appropriate for the constraints of WSNs, which is REST. Based on this analysis, we review the state-of-the-art of protocols that allows implementing REST Web services. To this end, we adopt the IEEE 802.15.4 standard for the physical and data-link layers, 6LoWPAN for the network layer and CoAP for the application layer. 6LoWPAN defines two forwarding techniques, which are called mesh under (MU) and route over (RO). It also provides a mechanism to fragment packets, which is called 6LoWPAN fragmentation. In part of the thesis, we study the effects that MU and RO have on communications using 6LoWPAN fragmentation. In particular, MU does not prevent forwarding unnecessary fragments and out-of-order delivery, which could lead to an inefficient use of bandwidth and a growth of energy consumption. We propose, then, a novel technique able to improve the performance of MU with fragmented packets, which we refer to as controlled mesh under (CMU). The results of a performance evaluation in a real WSN show that CMU is able to enhance the performance of MU by reducing its packet loss and end-to-end delay. In 6LoWPAN fragmentation, the loss of a fragment forces the retransmission of the entire packet. To overcome this limitation, CoAP defines blockwise transfer. It splits the packet into blocks and sends each one in reliable transactions, which introduces a significant communication overhead. We propose a novel analytical model to study blockwise and 6LoWPAN fragmentation, which is validated trough Monte Carlo simulations. Both techniques are compared in terms of reliability and delay. The results show that 6LoWPAN fragmentation is preferable for delay-constrained applications. For highly congested networks, blockwise slightly outperforms 6LoWPAN fragmentation in terms of reliability. CoAP defines the observe option to allow a client to register to a resource exposed by a server and to receive updates of its state. Existing QoS in the observe option supports partially timeliness. It allows specifying the validity of an update but it does not guarantee its on-time delivery. This approach is inefficient and does not consider applications, i.e. e-health, that requires the delivery of an update within a deadline. With this limitation in mind, we design and evaluate a novel mechanism for update delivery based on priority. The evaluation proves that implementing a delivery order improves the delay and delivery ratio of updates. Our proposal is also able to reduce the energy consumption allowing clients to express the class of updates that they wish to receive. In part of this thesis, we present our original library for TinyOS, which we referred to as TinyCoAP, and the design and implementation of a CoAP proxy. We compare TinyCoAP to CoapBlip, which is the CoAP implementation distributed with TinyOS. TinyCoAP proves to be able to reach a high code optimization and to reduce the impact over the memory of WSN nodes. The evaluation includes also the analysis of the CoAP reliability mechanism, which was still uncovered in the literature. As a novelty, we also compare CoAP with HTTP considering different solutions for the transport layer protocol such as UDP and persistent TCP connections. The CoAP proxy enables Web applications to transparently access the resources hosted in CoAP devices. It supports long-lived communications by including the WebSocket protocol. It also supports Web applications that use the traditional HTTP long-polling technique. Finally, one of the main contributions of the proxy design is the proposal of a standard URI path format to be used by Web applications to access to a CoAP resource.Esta tesis se enfoca en el estudio de protocolos de bajo consumo, técnicas de comunicación y software con el fin de evaluar, optimizar y desarrollar servicios Web en WSNs. Empezamos analizando la arquitectura de servicios Web con el objetivo de elegir la arquitectura más apropiada debido a las limitaciones de WSNs. Ésta se denomina REST. En base a este análisis, revisamos el estado del arte de los protocolos que permiten desarrollar servicios Web. Con este objetivo adoptamos el estándar IEEE 802.15.4 por la capa física y de enlace, 6LoWPAN por la de red y CoAP por la capa de aplicación. 6LoWPAN define dos técnicas de enrutamiento, denominadas 'Mesh Under' (MU) y 'Route Over' (RO). Asimismo ofrece un mecanismo para fragmentar paquetes, llamado 6LoWPAN fragmentation. En parte de la tesis estudiamos los efectos que MU y RO tienen sobre la comunicación que utiliza 6LoWPAN fragmentation. En particular, MU no previene enrutar fragmentos innecesarios y la entrega fuera de orden, lo cual podría provocar un uso ineficiente de ancho de banda y un crecimiento del consumo energía. Proponemos entonces nueva técnica capaz de mejorar las prestaciones de MU con paquetes fragmentados que denominamos 'Controlled Mesh Under' (CMU). Los resultados de una evaluación en una WSN real demuestran que CMU es capaz de mejorar las prestaciones de MU reduciendo la pérdida de paquetes y el retraso end-to-end. En 6LoWPAN fragmentation, la pérdida de un fragmento causa la retransmisión del paquete entero. Para evitar esta limitación CoAP define blockwise transfer. Esto divide el paquete en bloques y los envía en comunicaciones fiables provocando overhead. Proponemos un nuevo modelo analítico para estudiar blockwise y 6LoWPAN fragmentation cuya validación se realiza mediante simulaciones de Monte Carlo. Ambas técnicas se comparan en términos de fiabilidad y retraso. Los resultados muestran que es preferible usar 6LoWPAN fragmentation para las aplicaciones con restricciones en retraso. Para las redes mas congestionadas, blockwise mejora ligeramente 6LoWPAN fragmentation en términos de fiabilidad. CoAP define la opción observe para permitir a un cliente registrarse a un recurso proporcionado por un servidor y recibir actualizaciones de su estado. La QoS ofrecida por la opción observe proporciona soporte parcial por el timeliness. Esta permite especificar la validez de una actualización pero no garantiza su entrega a tiempo. Este enfoque es ineficiente y no incluye aplicaciones, como por ejemplo e-health que requieren la entrega de las actualizaciones en un plazo determinado. Teniendo en cuenta esta limitación, diseñamos y evaluamos un mecanismo novedoso para la entrega de actualizaciones basada en la prioridad. La evaluación demuestra que la implementación de una orden de entrega mejora la tasa de llegada y el retraso de las actualizaciones. Nuestra propuesta es capaz de reducir el consumo de energía permitiendo a los clientes expresar el tipo de actualización que desean recibir. En parte de esta tesis presentamos nuestra librería original pro TinyOS a la que nos referimos como TinyCoAP, así como el diseño y desarrollo de un Proxy CoAP. Comparamos TinyCoAP a CoapBlip, que es la aplicación distribuida con TinyOS. TinyCoAP demuestra ser capaz de alcanzar una alta optimización de código y reducir el impacto sobre la memoria de nodos de WSNs. La evaluación también incluye el análisis de la fiabilidad de CoAP que no había sido estudiada en la literatura. Como novedad también comparamos CoAP con HTTP, considerando diferentes soluciones para el protocolo de transporte como UDP y conexiones TCP persistentes. El Proxy CoAP permite a las aplicaciones Web acceder de manera transparente a los recursos almacenados en dispositivos CoAP. Éste incluye el protocolo WebSocket, que permite el establecimiento de conexiones long-lived. También permite el uso de aplicaciones Web con la tradicional técnica HTTP long-pollin

Improvements to end-to-end performance of low-power wireless networks

Over the last decades, wireless technologies have become an important part of our daily lives. A plentitude of new types of networks based on wireless technologies have emerged, often replacing wired solutions. In this development, not only the number and the types of devices equipped with wireless transceivers have significantly increased, also the variety of wireless technologies has grown considerably. Moreover, Internet access for wireless devices has paved the way for a large variety of new private, business, and research applications. Great efforts have been made by the research community and the industry to develop standards, specifications, and communication protocols for networks of constrained devices, we refer to as Wireless Sensor Networks (WSNs). The Institute of Electrical and Electronics Engineers (IEEE) defined the 802.15.4 standard for Personal Area Networks (PANs). With the introduction of an adaptation layer which makes IEEE 802.15.4 networks IPv6-capable, interconnecting billions of constrained devices has become possible and is expected to become a reality in the near future. The vision that embraces the idea of interweaving Internet technology with any type of smart objects, such as wearable devices or sensors of a WSN, is called the Internet of Things (IoT). The main goal of this thesis is the improvement of the performance of low-power wireless networks. Given the wide scope of application scenarios and networking solutions proposed for such networks, the development and optimization of communication protocols for wireless low-power devices is a challenging task: The hardware restrictions of constrained devices, specific application scenarios that may vary from one network to another, and the integration of WSNs into the IoT require new approaches to the design and evaluation of communication protocols. To face these challenges and to find solutions for them, research needs to be carried out. Mechanisms and parameter settings of communication protocol stacks for WSNs that are crucial to the network performance need to be identified, optimized, and complemented by adding new ones. The first contribution of this thesis is the improvement of end-to-end performance for IEEE 802.15.4-based PANs, where default parameter settings of common communication protocols are analyzed and evaluated with regard to their impact on the network performance. Physical evaluations are carried out in a large testbed, addressing the important question of whether the default and allowed range settings defined for common communication protocols are efficient or whether alternative settings may yield a better performance. The second contribution of this thesis is the improvement of end-to-end performance for ZigBee wireless HA networks. ZigBee is an important standard for low-power wireless networks and the investigations carried out address the crucial lack of investigation the ZigBee HA performance evaluations through physical experiments and potential ways to improve the network performance based on these experiments. Eventually, this thesis focuses on the improvement of the congestion control (CC) mechanism applied by the Constrained Application Protocol (CoAP) used in IoT communications. For the handling of the possible congestion in the IoT produced by the plethora of the devices and/or link errors innate to low-power radio communications, the default CC mechanism it lacks an advanced CC algorithm. Given CoAP's high relevance for IoT communications, an advanced CC algorithm should be capable of adapting to these particularities of IoT communications. This thesis contributes to this topic with the design and optimization of the CoAP Advanced Congestion Control/Simple (CoCoA) protocol, an advanced CC mechanism for CoAP.The investigations of advanced CC mechanisms for CoAP involve extensive performance evaluations in simulated networks and physical experiments in real testbeds using different communication technologies.En les últimes dècades, les tecnologies sense fils s'han convertit en una part important de la nostra vida quotidiana. Una àmplia varietat de nous tipus de xarxes basades en tecnologies sense fils han sorgit, sovint reemplaçant solucions cablejades. En aquest desenvolupament, no només el nombre i els tipus de dispositius equipats amb transceptors sense fils han augmentat significativament, també la varietat de tecnologies sense fils ha crescut de manera considerable. D'altra banda, l'accés a Internet per als dispositius sense fils ha donat pas a una gran varietat de noves aplicacions privades, comercials i d'investigació. La comunitat científica i la indústria han fet grans esforços per desenvolupar normes, especificacions i protocols de comunicació per a xarxes de sensors sense fils (WSNs). L'Institut d'Enginyeria Elèctrica i Electrònica (IEEE) defineix l'estàndard 802.15.4 per a xarxes d'àrea personal (PAN). Amb la introducció d'una capa d'adaptació que possibilita les IEEE 802.15.4 xarxes compatibles amb IPv6, la interconnexió de milers de milions de dispositius restringits s'ha fet possible. La idea d'entreteixir la tecnologia d'Internet amb qualsevol tipus d'objectes intel·ligents, com els dispositius o sensors d'una WSN és coneguda com la Internet de les Coses (IoT). L'objectiu principal d'aquesta tesi és la millora del rendiment de les WSNs. Donada l'àmplia gamma d'escenaris d'aplicacions i solucions de xarxes proposats per a aquest tipus de xarxes, el desenvolupament i l'optimització dels protocols de comunicació per a dispositius de WSNs és una tasca difícil: les limitacions de capacitats dels dispositius restringits, escenaris d'aplicació específics que poden variar d'una xarxa a l'altra, i la integració de les WSNs a la IoT requereixen nous enfocaments per al disseny i avaluació de protocols de comunicació. Cal identificar mecanismes i configuracions de paràmetres de les piles de protocols de comunicació per a WSNs que són elementals per al rendiment de la xarxa, optimitzar-los, i complementar-los amb l'addició d'altres de nous. La primera contribució d'aquesta tesi és la millora del rendiment extrem a extrem per PANs basat en IEEE 802.15.4, on s'analitza la configuració de paràmetres que es fan servir per defecte en protocols de comunicació comuns i s'avalua el seu impacte en el rendiment de la xarxa. Avaluacions físiques en una xarxa de sensors permeten fer front a la important qüestió de si els valors estàndards dels paràmetres són eficients o si ajustant-los es pot proporcionar un millor rendiment. La segona contribució d'aquesta tesi és l'optimització del rendiment extrem a extrem de xarxes ZigBee domòtiques (HA) sense fils. ZigBee és un estàndard important per a WSNs. Els estudis duts a terme cobreixen la important falta d'investigació d'avaluacions de rendiment de xarxes HA de ZigBee mitjançant experiments físics i mostrant formes per millorar el rendiment de la xarxa en base d'aquests experiments. Finalment, aquesta tesi es centra en la millora del mecanisme bàsic de control de congestió (CC) aplicada pel Constrained Application Protocol (CoAP) utilitzat en les comunicacions de la IoT. És necessari un algoritme de CC avançat per al control de la possible congestió en la IoT produïda per la plètora de dispositius i/o errors d'enllaç naturals per a les comunicacions de ràdio de baixa potencia. Donada l'alta rellevància de CoAP per a les comunicacions en la IoT, un algoritme CC avançat ha de ser capaç d'adaptar-se a les particularitats de les comunicacions de la IoT. Aquesta tesi contribueix al problema amb el disseny i l'optimització Control de Congestió Avançat / Simple del CoAP (CoCoA), un mecanisme de CC avançat per CoAP. Les investigacions de mecanismes de CC avançats per CoAP impliquen avaluacions extenses en xarxes simulades i experiments físics en xarxes reals utilitzant diferents tecnologies de comunicacions

Smart Wireless Sensor Networks

The recent development of communication and sensor technology results in the growth of a new attractive and challenging area - wireless sensor networks (WSNs). A wireless sensor network which consists of a large number of sensor nodes is deployed in environmental fields to serve various applications. Facilitated with the ability of wireless communication and intelligent computation, these nodes become smart sensors which do not only perceive ambient physical parameters but also be able to process information, cooperate with each other and self-organize into the network. These new features assist the sensor nodes as well as the network to operate more efficiently in terms of both data acquisition and energy consumption. Special purposes of the applications require design and operation of WSNs different from conventional networks such as the internet. The network design must take into account of the objectives of specific applications. The nature of deployed environment must be considered. The limited of sensor nodes� resources such as memory, computational ability, communication bandwidth and energy source are the challenges in network design. A smart wireless sensor network must be able to deal with these constraints as well as to guarantee the connectivity, coverage, reliability and security of network's operation for a maximized lifetime. This book discusses various aspects of designing such smart wireless sensor networks. Main topics includes: design methodologies, network protocols and algorithms, quality of service management, coverage optimization, time synchronization and security techniques for sensor networks

Network coding for reliable wireless sensor networks

Wireless sensor networks are used in many applications and are now a key element in the increasingly growing Internet of Things. These networks are composed of small nodes including wireless communication modules, and in most of the cases are able to autonomously con gure themselves into networks, to ensure sensed data delivery. As more and more sensor nodes and networks join the Internet of Things, collaboration between geographically distributed systems are expected. Peer to peer overlay networks can assist in the federation of these systems, for them to collaborate. Since participating peers/proxies contribute to storage and processing, there is no burden on speci c servers and bandwidth bottlenecks are avoided. Network coding can be used to improve the performance of wireless sensor networks. The idea is for data from multiple links to be combined at intermediate encoding nodes, before further transmission. This technique proved to have a lot of potential in a wide range of applications. In the particular case of sensor networks, network coding based protocols and algorithms try to achieve a balance between low packet error rate and energy consumption. For network coding based constrained networks to be federated using peer to peer overlays, it is necessary to enable the storage of encoding vectors and coded data by such distributed storage systems. Packets can arrive to the overlay through any gateway/proxy (peers in the overlay), and lost packets can be recovered by the overlay (or client) using original and coded data that has been stored. The decoding process requires a decoding service at the overlay network. Such architecture, which is the focus of this thesis, will allow constrained networks to reduce packet error rate in an energy e cient way, while bene ting from an e ective distributed storage solution for their federation. This will serve as a basis for the proposal of mathematical models and algorithms that determine the most e ective routing trees, for packet forwarding toward sink/gateway nodes, and best amount and placement of encoding nodes.As redes de sensores sem fios são usadas em muitas aplicações e são hoje consideradas um elemento-chave para o desenvolvimento da Internet das Coisas. Compostas por nós de pequena dimensão que incorporam módulos de comunicação sem fios, grande parte destas redes possuem a capacidade de se configurarem de forma autónoma, formando sistemas em rede para garantir a entrega dos dados recolhidos. (…

Energy efficient data collection and dissemination protocols in self-organised wireless sensor networks

Wireless sensor networks (WSNs) are used for event detection and data collection in a plethora of environmental monitoring applications. However a critical factor limits the extension of WSNs into new application areas: energy constraints. This thesis develops self-organising energy efficient data collection and dissemination protocols in order to support WSNs in event detection and data collection and thus extend the use of sensor-based networks to many new application areas. Firstly, a Dual Prediction and Probabilistic Scheduler (DPPS) is developed. DPPS uses a Dual Prediction Scheme combining compression and load balancing techniques in order to manage sensor usage more efficiently. DPPS was tested and evaluated through computer simulations and empirical experiments. Results showed that DPPS reduces energy consumption in WSNs by up to 35% while simultaneously maintaining data quality and satisfying a user specified accuracy constraint. Secondly, an Adaptive Detection-driven Ad hoc Medium Access Control (ADAMAC) protocol is developed. ADAMAC limits the Data Forwarding Interruption problem which causes increased end-to-end delay and energy consumption in multi-hop sensor networks. ADAMAC uses early warning alarms to dynamically adapt the sensing intervals and communication periods of a sensor according to the likelihood of any new events occurring. Results demonstrated that compared to previous protocols such as SMAC, ADAMAC dramatically reduces end-to-end delay while still limiting energy consumption during data collection and dissemination. The protocols developed in this thesis, DPPS and ADAMAC, effectively alleviate the energy constraints associated with WSNs and will support the extension of sensorbased networks to many more application areas than had hitherto been readily possible

Wireless Sensor Networks

The aim of this book is to present few important issues of WSNs, from the application, design and technology points of view. The book highlights power efficient design issues related to wireless sensor networks, the existing WSN applications, and discusses the research efforts being undertaken in this field which put the reader in good pace to be able to understand more advanced research and make a contribution in this field for themselves. It is believed that this book serves as a comprehensive reference for graduate and undergraduate senior students who seek to learn latest development in wireless sensor networks