Evaluating the Differences of Gridding Techniques for Digital Elevation Models Generation and Their Influence on the Modeling of Stony Debris Flows Routing: A Case Study From Rovina di Cancia Basin (North-Eastern Italian Alps)

Debris \ufb02ows are among the most hazardous phenomena in mountain areas. To cope with debris \ufb02ow hazard, it is common to delineate the risk-prone areas through routing models. The most important input to debris \ufb02ow routing models are the topographic data, usually in the form of Digital Elevation Models (DEMs). The quality of DEMs depends on the accuracy, density, and spatial distribution of the sampled points; on the characteristics of the surface; and on the applied gridding methodology. Therefore, the choice of the interpolation method affects the realistic representation of the channel and fan morphology, and thus potentially the debris \ufb02ow routing modeling outcomes. In this paper, we initially investigate the performance of common interpolation methods (i.e., linear triangulation, natural neighbor, nearest neighbor, Inverse Distance to a Power, ANUDEM, Radial Basis Functions, and ordinary kriging) in building DEMs with the complex topography of a debris \ufb02ow channel located in the Venetian Dolomites (North-eastern Italian Alps), by using small footprint full- waveform Light Detection And Ranging (LiDAR) data. The investigation is carried out through a combination of statistical analysis of vertical accuracy, algorithm robustness, and spatial clustering of vertical errors, and multi-criteria shape reliability assessment. After that, we examine the in\ufb02uence of the tested interpolation algorithms on the performance of a Geographic Information System (GIS)-based cell model for simulating stony debris \ufb02ows routing. In detail, we investigate both the correlation between the DEMs heights uncertainty resulting from the gridding procedure and that on the corresponding simulated erosion/deposition depths, both the effect of interpolation algorithms on simulated areas, erosion and deposition volumes, solid-liquid discharges, and channel morphology after the event. The comparison among the tested interpolation methods highlights that the ANUDEM and ordinary kriging algorithms are not suitable for building DEMs with complex topography. Conversely, the linear triangulation, the natural neighbor algorithm, and the thin-plate spline plus tension and completely regularized spline functions ensure the best trade-off among accuracy and shape reliability. Anyway, the evaluation of the effects of gridding techniques on debris \ufb02ow routing modeling reveals that the choice of the interpolation algorithm does not signi\ufb01cantly affect the model outcomes

Modelling the spatial distribution of DEM Error

Assessment of a DEM’s quality is usually undertaken by deriving a measure of DEM accuracy – how close the DEM’s elevation values are to the true elevation. Measures such as Root Mean Squared Error and standard deviation of the error are frequently used. These measures summarise elevation errors in a DEM as a single value. A more detailed description of DEM accuracy would allow better understanding of DEM quality and the consequent uncertainty associated with using DEMs in analytical applications. The research presented addresses the limitations of using a single root mean squared error (RMSE) value to represent the uncertainty associated with a DEM by developing a new technique for creating a spatially distributed model of DEM quality – an accuracy surface. The technique is based on the hypothesis that the distribution and scale of elevation error within a DEM are at least partly related to morphometric characteristics of the terrain. The technique involves generating a set of terrain parameters to characterise terrain morphometry and developing regression models to define the relationship between DEM error and morphometric character. The regression models form the basis for creating standard deviation surfaces to represent DEM accuracy. The hypothesis is shown to be true and reliable accuracy surfaces are successfully created. These accuracy surfaces provide more detailed information about DEM accuracy than a single global estimate of RMSE

Airborne LiDAR for DEM generation: some critical issues

Airborne LiDAR is one of the most effective and reliable means of terrain data collection. Using LiDAR data for DEM generation is becoming a standard practice in spatial related areas. However, the effective processing of the raw LiDAR data and the generation of an efficient and high-quality DEM remain big challenges. This paper reviews the recent advances of airborne LiDAR systems and the use of LiDAR data for DEM generation, with special focus on LiDAR data filters, interpolation methods, DEM resolution, and LiDAR data reduction. Separating LiDAR points into ground and non-ground is the most critical and difficult step for DEM generation from LiDAR data. Commonly used and most recently developed LiDAR filtering methods are presented. Interpolation methods and choices of suitable interpolator and DEM resolution for LiDAR DEM generation are discussed in detail. In order to reduce the data redundancy and increase the efficiency in terms of storage and manipulation, LiDAR data reduction is required in the process of DEM generation. Feature specific elements such as breaklines contribute significantly to DEM quality. Therefore, data reduction should be conducted in such a way that critical elements are kept while less important elements are removed. Given the highdensity characteristic of LiDAR data, breaklines can be directly extracted from LiDAR data. Extraction of breaklines and integration of the breaklines into DEM generation are presented

Spectral filtering as a method of visualising and removing striped artefacts in digital elevation data

Spectral filtering was compared with traditional mean spatial filters to assess their ability to identify and remove striped artefacts in digital elevation data. The techniques were applied to two datasets: a 100 m contour derived digital elevation model (DEM) of southern Norway and a 2 m LiDAR DSM of the Lake District, UK. Both datasets contained diagonal data artefacts that were found to propagate into subsequent terrain analysis. Spectral filtering used fast Fourier transformation (FFT) frequency data to identify these data artefacts in both datasets. These were removed from the data by applying a cut filter, prior to the inverse transform. Spectral filtering showed considerable advantages over mean spatial filters, when both the absolute and spatial distribution of elevation changes made were examined. Elevation changes from the spectral filtering were restricted to frequencies removed by the cut filter, were small in magnitude and consequently avoided any global smoothing. Spectral filtering was found to avoid the smoothing of kernel based data editing, and provided a more informative measure of data artefacts present in the FFT frequency domain. Artefacts were found to be heterogeneous through the surfaces, a result of their strong correlations with spatially autocorrelated variables: landcover and landsurface geometry. Spectral filtering performed better on the 100 m DEM, where signal and artefact were clearly distinguishable in the frequency data. Spectrally filtered digital elevation datasets were found to provide a superior and more precise representation of the landsurface and be a more appropriate dataset for any subsequent geomorphological applications

Grid models versus TIN : geometric accuracy of multibeam data processing

C

The Mapping of Composite Pollen from Point Sampled Data and Cartographic Generalization

Pollen grains are microgametophytes produced by angiosperm and gymnosperm plants. They are responsible for transporting genetic material and carrying out fertilization. The study of pollen has numerous practical applications such as plant biodiversity, paleoclimatology, archaeology, allergy studies, the study of nectar sources in honey (melissopalynology), searching for sources of petroleum, and more recently, using pollen as a trace evidence component in forensics. Once pollen grains become airborne, their dispersal is controlled by a number of physical factors that determine the deposition distance from their source area. The purpose of this work is to study spatial pattern of composite pollen in Big Bend National Park using pollen information contained in the top soil layer, test the accuracy of four interpolation methods and use cartographic generalizations to present the results. The focus is on a composite pollen group that is a member of the Asteraceae plant family and is a prolific producer of airborne pollen (Figure 1). FIGURE 1 POLLEN GRAIN OF HELIANTHUS (ASTERACEAE