40 research outputs found
Analytical Characterization and Optimum Detection of Nonlinear Multicarrier Schemes
It is widely recognized that multicarrier systems such as orthogonal frequency division
multiplexing (OFDM) are suitable for severely time-dispersive channels. However, it is
also recognized that multicarrier signals have high envelope fluctuations which make them especially sensitive to nonlinear distortion effects. In fact, it is almost unavoidable to have nonlinear distortion effects in the transmission chain. For this reason, it is essential to have a theoretical, accurate characterization of nonlinearly distorted signals not only to evaluate the corresponding impact of these distortion effects on the system’s performance, but also to develop mechanisms to combat them. One of the goals of this thesis is to address these challenges and involves a theoretical characterization of nonlinearly distorted multicarrier signals in a simple, accurate way.
The other goal of this thesis is to study the optimum detection of nonlinearly distorted,
multicarrier signals. Conventionally, nonlinear distortion is seen as a noise term
that degrades the system’s performance, leading even to irreducible error floors. Even
receivers that try to estimate and cancel it have a poor performance, comparatively to the performance associated to a linear transmission, even with perfect cancellation of nonlinear distortion effects. It is shown that the nonlinear distortion should not be considered as a noise term, but instead as something that contains useful information for detection purposes. The adequate receiver to take advantage of this information is the optimum receiver, since it makes a block-by-block detection, allowing us to exploit the nonlinear distortion which is spread along the signal’s band. Although the optimum receiver for nonlinear multicarrier schemes is too complex, due to its necessity to compare the received signal with all possible transmitted sequences, it is important to study its potential performance gains. In this thesis, it is shown that the optimum receiver outperforms the conventional detection, presenting gains not only relatively to conventional receivers that deal with nonlinear multicarrier signals, but also relatively to conventional receivers that deal with linear, multicarrier signals. We also present sub-optimum receivers which are able to approach the performance gains associated to the optimum detection and that can even outperform the conventional linear, multicarrier schemes
Maximum likelihood detection for OFDM signals with strong nonlinear distortion effects
Dissertação para obtenção do Grau de Mestre em
Engenharia Electrotécnica e de Computadore
LINC based amplifier architectures for power efficient wireless transmitters
Wireless communication trends Performance measuring of a communication system Power amplifiers and transmitters Power efficiency enhancement techniques Design and Optimization of LINC transmitter for OFDM applications LINC concept LINC signal decomposition LINC efficiency and combiner technologies Design optimization of LINC system Mismatch (imbalance) effects Advanced LINC transmitter architectures The 2X1 LINC transmitter system The 2X2 LINC transmitter system Mismatch effects
Enhanced Multicarrier Techniques for Professional Ad-Hoc and Cell-Based Communications (EMPhAtiC) Document Number D3.3 Reduction of PAPR and non linearities effects
Livrable d'un projet Européen EMPHATICLike other multicarrier modulation techniques, FBMC suffers from high peak-to-average power ratio (PAPR), impacting its performance in the presence of a nonlinear high power amplifier (HPA) in two ways. The first impact is an in-band distortion affecting the error rate performance of the link. The second impact is an out-of-band effect appearing as power spectral density (PSD) regrowth, making the coexistence between FBMC based broad-band Professional Mobile Radio (PMR) systems with existing narrowband systems difficult to achieve. This report addresses first the theoretical analysis of in-band HPA distortions in terms of Bit Error Rate. Also, the out-of band impact of HPA nonlinearities is studied in terms of PSD regrowth prediction. Furthermore, the problem of PAPR reduction is addressed along with some HPA linearization techniques and nonlinearity compensation approaches
Recommended from our members
Design and Linearization of Energy Efficiency Power Amplifier in Nonlinear OFDM Transmitter for LTE-5G Applications. Simulation and measurements of energy efficiency power amplifier in the presence of nonlinear OFDM transmitter system and digital predistortion based on Hammerstein-Wiener method
This research work has made an effort to understand a novel line of radio frequency
power amplifiers (RFPAs) that address initiatives for efficiency enhancement and
linearity compensation to harmonize the fifth generation (5G) campaign. The objective
is to enhance the performance of an orthogonal frequency division multiplexing-long
term evolution (OFDM-LTE) transmitter by reducing the nonlinear distortion of the
RFPA.
The first part of this work explores the design and implementation of 15.5 W class AB
RF power amplifier, adopting a balanced technique to stimulate efficiency enhancement
and redeeming exhibition of excessive power in the transmitter. Consequently, this work
goes beyond improving efficiency over a linear RF power amplifier design; in which a
comprehensive investigation on the fundamental and harmonic components of class F
RF power amplifier using a load-pull approach to realise an optimum load impedance
and the matching network is presented. The frequency bandwidth for both amplifiers was
allocated to operate in the 2.620-2.690 GHz of mobile LTE applications.
The second part explores the development of the behavioural model for the class AB
power amplifier. A particular novel, Hammerstein-Wiener based model is proposed to
describe the dynamic nonlinear behaviour of the power amplifier. The RF power amplifier
nonlinear distortion is approximated using a new linear parameter approximation
approach. The first and second-order Hammerstein-Wiener using the Normalised Least
Mean Square Error (NLMSE) algorithm is used with the aim of easing the complexity of
filtering process during linear memory cancellation. Moreover, an enhanced adaptive
Wiener model is proposed to explore the nonlinear memory effect in the system. The
proposed approach is able to balance between convergence speed and high-level
accuracy when compared with behavioural modelling algorithms that are more complex
in computation.
Finally, the adaptive predistorter technique is implemented and verified in the OFDM
transceiver test-bed. The results were compared against the computed one from
MATLAB simulation for OFDM and 5G modulation transmitters. The results have
confirmed the reliability of the model and the effectiveness of the proposed predistorter.Fundacão para a Ciência e a Tecnologia, Portugal, under
European Union’s Horizon 2020 research and innovation programme ... grant agreement H2020-MSCA-ITN- 2016 SECRET-722424
I also acknowledge the role of the National Space Research and Development Agency (NASRDA)
Sokoto State Government
Petroleum Technology Trust Fund (PTDF
Class-E Power Amplifiers in Modern RF Transmitters
Power amplifiers have been playing a vital role in most wireless communication
systems. In order to improve efficiency of wireless systems, advanced transmitter
architectures, such as Doherty amplifiers, outphasing amplifiers, supply voltage modulation
techniques are widely used. The goal of this work is to develop novel techniques
for building load modulation transmitters based on class-E power amplifiers.
The first contribution is an analytical model for derivation load network parameters.
The proposed model derives the parameters for both the peak and back-off
power levels providing high efficiency. The proposed model demonstrates, that
class-E PA with shunt capacitance and shunt filter is capable of providing high drain
efficiency for back-off output power levels.
The second contribution is a design of a wideband class-E power amplifier
(PA) with shunt capacitance and shunt filter. The broadband operation has been
achieved by application of the double reactance compensation technique. Simulated
and experimental results are presented. The performance of the fabricated PA is
compared with existing wideband PAs.
The third contribution is application of the proposed technique to outphasing
PA design. The designed outphasing PA was optimized, fabricated and tested. A
possibility to extend the operational bandwidth of the PA is considered. Also the
application of the proposed technique to Doherty PA design is demonstrated.
The fourth contribution is linearization of outphasing PA. Firstly, an analytical
model describing the nonlinearity of nonisolated combiners under amplitude imbalance
is presented. Secondly, a novel phase-only predistortion technique for class-E
outphasing PAs is proposed. Thirdly, linearization of the fabricated outphasing
PA based on memory polynomial model is demonstrated using a 64QAM OFDM
modulated signal with 20 MHz bandwidth.
Overall, this work provides novel techniques for load modulation transmitter
design based on class-E power amplifiers with shunt capacitance and shunt filter
The Experimental Design of Radio-over-Fibre System for 4G Long Term Evolution
The 3rd Generation Partnership Project (3GPP) Long Term Evolution (LTE) is the potential key to meet the exponentially increasing demand of the mobile end users. The entire LTE network architecture and signal processing is carried out at the enhanced NodeB (eNB) level, hence the increased complexity and cost. Therefore, it is not efficient to deploy eNB for the purpose of extending the network coverage. As a solution, deployment of relay node (RN), with radio-over-fibre (RoF) acting as the interface between eNB and RN is proposed. Due to the high path loss and multipath fading, wireless interface would not be the ideal channel between eNB and RN. A detailed investigation is carried out by comparing the Rayleigh multipath fading channel with the optical fibre channel, where the latter achieved a ~31 dB of signal-to-noise ratio (SNR) gain. The distributed feedback laser (DFB) is selected as the direct modulated laser (DML) source, where the modulation method introduces a positive frequency chirp (PFC). The existing mathematical expression does not precisely explain on how the rate equations contribute to PFC. Therefore, an expression for PFC is proposed and derived from the carrier and photon densities of the rate equations. Focusing on theoretical development of DML based RoF system, a varying fast Fourier transform (FFT) scheme is introduced into LTE-Advanced (LTE-A) technology as an alternative design to the carrier aggregation. A range of FFT sizes are investigated with different levels of optical launch power (OLP), the optimum OLP has been defined to be within the range of ~-6 to 0 dBm, which is known as the intermixing region. It is found that FFT size-128 provides improved average system efficiency of ~54% and ~65% in comparison to FFT size-64 and FFT size-128, respectively, within the intermixing region. While fixing FFT size to 128, the investigation is diverted to the optimisation of optical modulators. The author revealed that the performance of dual electrode-Mach Zehnder modulator (DE-MZM) is superior to both DML scheme and single electrode (SE)-MZM, where DE-MZM achieved a transmission span of 88 km and 71 km for 16-quadrature amplitude modulation (QAM) and 64-QAM, respectively. At the initial experimental link design and optimisation stage, an optimum modulation region (OMR) is proposed at the optical modulation index (OMI) of 0.38, which resulted in an average error vector magnitude (EVM) of ~1.01% for a 10 km span. The EVM of ~1.01% is further improved by introducing the optimum OLP region at –2 dBm, where the observed average EVM trimmed to ~0.96%. There is no deviation found in the intermixing region by transmitting the LTE signal through a varying transmission span of 10 to 60 km, additionally, it was also revealed that the LTE RoF nonlinear threshold falls above the OLP of 6 dBm. The proposed system was further developed to accommodate 2×2 multiple-input and multiple-output (MIMO) transmission by utilising analogue frequency division multiplexing (FDM) technique. The studies procured that the resulting output quality of signal at 2 GHz and 2.6 GHz is almost identical with a twofold gain in the peak data rate and no occurrence of intermodulation (IMD). In order to emulate the complete LTE RoF solution, an experimental design of full duplex frequency division duplex (FDD) system with dense wavelength division multiplexing (DWDM) architecture is proposed. It is found that channel spacing of 50 MHz between the downlink (DL) and uplink (UL) introduces severe IMD distortion, where an adjacent channel leakage ratio (ACLR) penalty of 14.10 dB is observed. Finally, a novel nonlinear compensation technique utilising a direct modulation based frequency dithering (DMFD) scheme is proposed. The LTE RoF system average SNR gain observed at OLP of 10 dBm for the 50 km transmission span is ~5.97 dB. External modulation based frequency dithering (EMFD) exhibits ~3 dB of average SNR gain over DMFD method
Radio Communications
In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks