A comprehensive review on various non-isolated power converter topologies for a light-emitting diode driver

Light-emitting diode (LED) lighting applications aided by an electronic power control have become very attractive in the recent years. For LED lighting applications, it is essential to design a converter with single/multi-output for handling multiple loads. As the LED load is more sensitive to the change in input/converter parameters, it is necessary to regulate the current concerning the design specifications. In this paper, several LED topologies are reviewed with a focus on power density, single/multi-load operation, size, and reliability. Several converter topologies are reviewed and compared in terms of power rating, number of semiconductor switches, isolation, and efficiency. Various modulation techniques used for dimming control are described in brief. The salient features of each converter topology are discussed with the power rating and application for which the topology can be preferred. So, the selection of the power factor correction (PFC) and low source side harmonics converter topology is presented. This paper will be helpful to the researchers who are working on the development of LED drivers

Análise e projeto de conversores para acionamento de painéis de LED orgânico de baixa potência alimentados por rede elétrica CA

This work presents some converter topologies aimed to drive an organic light emitting diode (OLED) panel from the AC power grid. The main objective of this work was to develop a converter that can supply power to this kind of load, properly meeting the requirements described in the current standards. Also, the driver should be compact, lightweight and present a slim profile. The system was designed with switching frequencies higher than 100 kHz aiming the size reduction of the magnetic components. Moreover, topologies were analyzed with high step-down characteristic to proper deal with the voltage level of the power grid of 127 VRMS (180 V peak to peak) and the panel rated voltage (21 V), with the capability of current regulation as well, thus allowing for luminosity control. By using a digital simulation, it was possible to evaluate the application of different converters such as the buck-boost/buck two-stage topology, an integrated double buck with tapped inductor and a conventional integrated double buck topology for power factor correction and current regulation. A prototype of na integrated double buck converter designed to supply an output power of 10 W was implemented in the laboratory, whose results are compared to the theoretical data, yielding a driver with high power factor, low harmonic distortion with up to 79 % efficiency.Este trabalho apresenta um estudo topológico, envolvendo conversores estáticos com modulação por largura de pulso (PWM) orientados ao acionamento de painéis baseados em diodos orgânicos emissores de luz (OLEDs) conectados à rede elétrica CA. O objetivo principal do estudo é desenvolver um conversor capaz de fornecer energia à carga OLED, atendendo adequadamente aos requisitos descritos nas normas vigentes. Além disso, é interessante que o conversor seja compacto, leve e que, assim como os painéis,apresente um perfil delgado. Foram utilizadas frequências de comutação elevadas, buscando a redução de volume, principalmente nos componentes magnéticos. Também foram empregadas topologias com alta capacidade abaixadora para reduzir o nível de tensão da rede elétrica de 127 VRMS (180 V de pico a pico) para a tensão nominal do painel (21 V), além do controle da corrente de saída, permitindo a regulação da intensidade luminosa da luminária. Com o apoio de simulações computacionais, foi possível avaliar diferentes conversores, como os de estágios integrados, de dois estágios, com indutor com derivação, além de outras alternativas para correção do fator de potência e regulação de corrente. Um protótipo baseado no conversor duplo buck integrado de 10 W foi desenvolvido para exemplificar a viabilidade da proposta, consistindo num circuito compacto de elevado fator de potência, baixa distorção harmônica e eficiência de até 79 %.CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superio

Hybrid monolithic integration of high-power DC-DC converters in a high-voltage technology

The supply of electrical energy to home, commercial, and industrial users has become ubiquitous, and it is hard to imagine a world without the facilities provided by electrical energy. Despite the ever increasing efficiency of nearly every electrical application, the worldwide demand for electrical power continues to increase, since the number of users and applications more than compensates for these technological improvements. In order to maintain the affordability and feasibility of the total production, it is essential for the distribution of the produced electrical energy to be as efficient as possible. In other words the loss in the power distribution is to be minimized. By transporting electrical energy at the maximum safe voltage, the current in the conductors, and the associated conduction loss can remain as low as possible. In order to optimize the total efficiency, the high transportation voltage needs to be converted to the appropriate lower voltage as close as possible to the end user. Obviously, this conversion also needs to be as efficient, affordable, and compact as possible. Because of the ever increasing integration of electronic systems, where more and more functionality is combined in monolithically integrated circuits, the cost, the power consumption, and the size of these electronic systems can be greatly reduced. This thorough integration is not limited to the electronic systems that are the end users of the electrical energy, but can also be applied to the power conversion itself. In most modern applications, the voltage conversion is implemented as a switching DC-DC converter, in which electrical energy is temporarily stored in reactive elements, i.e. inductors or capacitors. High switching speeds are used to allow for a compact and efficient implementation. For low power levels, typically below 1 Watt, it is possible to monolithically implement the voltage conversion on an integrated circuit. In some cases, this is even done on the same integrated circuit that is the end user of the electrical energy to minimize the system dimensions. For higher power levels, it is no longer feasible to achieve the desired efficiency with monolithically integrated components, and some external components prove indispensable. Usually, the reactive components are the main limiting factor, and are the first components to be moved away from the integrated circuit for increasing power levels. The semiconductor components, including the power transistors, remain part of the integrated circuit. Using this hybrid approach, it is possible in modern converterapplications to process around 60 Watt, albeit limited to voltages of a few Volt. For hybrid integrated converters with an output voltage of tens of Volt, the power is limited to approximately 10 Watt. For even higher power levels, the integrated power transistors also become a limiting factor, and are replaced with discrete power devices. In these discrete converters, greatly increased power levels become possible, although the system size rapidly increases. In this work, the limits of the hybrid approach are explored when using so-called smart-power technologies. Smart-power technologies are standard lowcost submicron CMOS technologies that are complemented with a number of integrated high-voltage devices. By using an appropriate combination of smart-power technologies and circuit topologies, it is possible to improve on the current state-of-the-art converters, by optimizing the size, the cost, and the efficiency. To determine the limits of smart-power DC-DC converters, we first discuss the major contributing factors for an efficient energy distribution, and take a look at the role of voltage conversion in the energy distribution. Considering the limitations of the technologies and the potential application areas, we define two test-cases in the telecommunications sector for which we want to optimize the hybrid monolithic integration in a smart-power technology. Subsequently, we explore the specifications of an ideal converter, and the relevant properties of the affordable smart-power technologies for the implementation of DC-DC converters. Taking into account the limitations of these technologies, we define a cost function that allows to systematically evaluate the different potential converter topologies, without having to perform a full design cycle for each topology. From this cost function, we notice that the de facto default topology selection in discrete converters, which is typically based on output power, is not optimal for converters with integrated power transistors. Based on the cost function and the boundary conditions of our test-cases, we determine the optimal topology for a smart-power implementation of these applications. Then, we take another step towards the real world and evaluate the influence of parasitic elements in a smart-power implementation of switching converters. It is noticed that the voltage overshoot caused by the transformer secondary side leakage inductance is a major roadblock for an efficient implementation. Since the usual approach to this voltage overshoot in discrete converters is not applicable in smart-power converters due to technological limitations, an alternative approach is shown and implemented. The energy from the voltage overshoot is absorbed and transferred to the output of the converter. This allows for a significant reduction in the voltage overshoot, while maintaining a high efficiency, leading to an efficient, compact, and low-cost implementation. The effectiveness of this approach was tested and demonstrated in both a version using a commercially available integrated circuit, and our own implementation in a smart-power integrated circuit. Finally, we also take a look at the optimization of switching converters over the load range by exploiting the capabilities of highly integrated converters. Although the maximum output power remains one of the defining characteristics of converters, it has been shown that most converters spend a majority of their lifetime delivering significantly lower output power. Therefore, it is also desirable to optimize the efficiency of the converter at reduced output current and output power. By splitting the power transistors in multiple independent segments, which are turned on or off in function of the current, the efficiency at low currents can be significantly improved, without introducing undesirable frequency components in the output voltage, and without harming the efficiency at higher currents. These properties allow a near universal application of the optimization technique in hybrid monolithic DC-DC converter applications, without significant impact on the complexity and the cost of the system. This approach for the optimization of switching converters over the load range was demonstrated using a boost converter with discrete power transistors. The demonstration of our smart-power implementation was limited to simulations due to an issue with a digital control block. On a finishing note, we formulate the general conclusions and provide an outlook on potential future work based on this research

HOW COMPETITIVE IS PHOTOVOLTAIC ELECTRICITY

Over the last decade prices for residential grid-connected PV systems have decreased by 50 to 80% depeding on the local market conditions. Electricity production from residential photovoltaic solar systems has shown that it can be cheaper as residential electricity prices in a growing number of countries, depending on the actual electricity price and the local solar radiation level. The article shows how the financing costs for a PV system and the actual electricity price determine the economics of a unsubsidised PV system.JRC.F.7-Renewable Energ

Impact of modern lighting technology on the power line communications channel

Abstract: In this study, we look at the impact of modern lighting technology on Power Line Communications (PLC). Power Line Communications has become important due to the Smart Grid and Internet of Things (IoT) development. Modern lighting technology has been developed to make efficient use of electric energy. This technology uses power converters to enable the use of different lighting sources. A byproduct of this conversion process is electronic noise. This noise can interfere with the PLC channel. In this study, different lighting technologies are investigated from a noise standpoint and compared to PLC signal levels. Both narrowband and broadband PLC frequency ranges are investigated. This study shows that the influence of noise on the PLC channel depends predominantly on the conversion topology as well as whether filters have been used. The measurement results show that the influence on data communication system can vary in impact from low to severe. Results were obtained for low energy, high energy, indoor and outdoor lighting sources. A common front end topology encounted is the bridge rectifier and high frequency DC-DC converter combination. These topologies are investigated in details. The study presented here shows that lighting technology (causing interference) needs special consideration when designing PLC systems. Of particular importance is the use of filters which ensure compliance with interference standards and limit the noise effects on the PLC signal.D.Ing. (Electrical and Electronic Engineering Science

Design and Control of Power Converters 2019

In this book, 20 papers focused on different fields of power electronics are gathered. Approximately half of the papers are focused on different control issues and techniques, ranging from the computer-aided design of digital compensators to more specific approaches such as fuzzy or sliding control techniques. The rest of the papers are focused on the design of novel topologies. The fields in which these controls and topologies are applied are varied: MMCs, photovoltaic systems, supercapacitors and traction systems, LEDs, wireless power transfer, etc

Design of LCOS microdisplay backplanes for projection applications

De evolutie van licht emitterende diodes (LED) heeft ervoor gezorgd dat het op dit moment interessant wordt om deze componenten als lichtbron te gebruiken in projectiesystemen. LED’s hebben belangrijke voordelen vergeleken met klassieke booglampen. Ze zijn compact, ze hebben een veel grotere levensduur en ogenblikkelijke schakeltijden, ze werken op lage spanningen, etc. LED’s zijn smalbandig en kunnen een groterekleurenbereik realiseren. Ze hebben momenteel echter een beperkte helderheid. Naast de lichtbron is het type van de lichtklep ook bepalend voor de kwaliteit van een projectiesysteem. Er bestaan verschillende lichtkleptechnologieën waaronder die van de reflectieve LCOS-panelen. Deze lichtkleppen kunnen zeer hoge resoluties hebben en wordenvaak gebruikt in kwalitatieve, professionele projectiesystemen. LED’s zijn echter totaal verschillend van booglampen. Ze hebben een andere vorm, package, stralingspatroon, aansturing, fysische en thermische eigenschappen, etc. Hoewel er een twintigtal optische architecturen bekend zijn voor reflectieve beeldschermen (met een booglamp als lichtbron), zijn ze niet geschikt voor LED-projectoren en moeten nieuwe optische architecturen en een elektronische aansturing ontwikkeld worden. In dit doctoraat werd er hieromtrent onderzoek gedaan. Er werd uiteindelijk een driekleurenprojector (R, G, B) met een efficiënt LED-belichtingssysteem gebouwd met twee LCOS-lichtkleppen. Deze LEDprojector heeft superieure eigenschappen (zeer lange levensduur, beeldkwaliteit, etc.) en een matige lichtopbrengst