Optimal Precoders for Tracking the AoD and AoA of a mm-Wave Path

In millimeter-wave channels, most of the received energy is carried by a few paths. Traditional precoders sweep the angle-of-departure (AoD) and angle-of-arrival (AoA) space with directional precoders to identify directions with largest power. Such precoders are heuristic and lead to sub-optimal AoD/AoA estimation. We derive optimal precoders, minimizing the Cram\'{e}r-Rao bound (CRB) of the AoD/AoA, assuming a fully digital architecture at the transmitter and spatial filtering of a single path. The precoders are found by solving a suitable convex optimization problem. We demonstrate that the accuracy can be improved by at least a factor of two over traditional precoders, and show that there is an optimal number of distinct precoders beyond which the CRB does not improve.Comment: Resubmission to IEEE Trans. on Signal Processing. 12 pages and 9 figure

A rank-one optimization framework and its applications to transmit beamforming

This paper proposes an elegant optimization framework consisting of a mix of linear-matrix-inequality and second-order-cone constraints. The proposed framework generalizes the semidefinite relaxation (SDR) enabled solution to the typical transmit beamforming problems presented in the form of quadratically constrained quadratic programs (QCQPs) in the literature. It is proved that the optimization problems subsumed under the framework always admit a rank-one optimal solution when they are feasible and their optimal solutions are not trivial. This finding indicates that the relaxation is tight as the optimal solution of the original beamforming QCQP can be straightforwardly obtained from that of the SDR counterpart without any loss of optimality. Four representative examples of transmit beamforming, i.e., transmit beamforming with perfect channel state information (CSI), transmit beamforming with imperfect CSI, chance-constraint approach for imperfect CSI, and reconfigurable-intelligent-surface (RIS) aided beamforming, are shown to demonstrate how the proposed optimization framework can be realized in deriving the SDR counterparts for different beamforming designs

Optimization in multi-relay wireless networks

The concept of cooperation in communications has drawn a lot of research attention in recent years due to its potential to improve the efficiency of wireless networks. This new form of communications allows some users to act as relays and assist the transmission of other users' information signals. The aim of this thesis is to apply optimization techniques in the design of multi-relay wireless networks employing cooperative communications. In general, the thesis is organized into two parts: ``Distributed space-time coding' (DSTC) and ``Distributed beamforming', which cover two main approaches in cooperative communications over multi-relay networks. In Part I of the thesis, various aspects of distributed implementation of space-time coding in a wireless relay network are treated. First, the thesis proposes a new fully-diverse distributed code which allows noncoherent reception at the destination. Second, the problem of coordinating the power allocation (PA) between source and relays to achieve the optimal performance of DSTC is studied and a novel PA scheme is developed. It is shown that the proposed PA scheme can obtain the maximum diversity order of DSTC and significantly outperform other suboptimal PA schemes. Third, the thesis presents the optimal PA scheme to minimize the mean-square error (MSE) in channel estimation during training phase of DSTC. The effect of imperfect channel estimation to the performance of DSTC is also thoroughly studied. In Part II of the thesis, optimal distributed beamforming designs are developed for a wireless multiuser multi-relay network. Two design criteria for the optimal distributed beamforming at the relays are considered: (i) minimizing the total relay power subject to a guaranteed Quality of Service (QoS) measured in terms of signal-to-noise-ratio (SNR) at the destinations, and (ii) jointly maximizing the SNR margin at the destinations subject to power constraints at the relays. Based on convex optimization techniques, it is shown that these problems can be formulated and solved via second-order conic programming (SOCP). In addition, this part also proposes simple and fast iterative algorithms to directly solve these optimization problems

Robust Beamforming for Cognitive and Cooperative Wireless Networks

Ph.DDOCTOR OF PHILOSOPH

MIMO Systems

In recent years, it was realized that the MIMO communication systems seems to be inevitable in accelerated evolution of high data rates applications due to their potential to dramatically increase the spectral efficiency and simultaneously sending individual information to the corresponding users in wireless systems. This book, intends to provide highlights of the current research topics in the field of MIMO system, to offer a snapshot of the recent advances and major issues faced today by the researchers in the MIMO related areas. The book is written by specialists working in universities and research centers all over the world to cover the fundamental principles and main advanced topics on high data rates wireless communications systems over MIMO channels. Moreover, the book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity

Fundamental Limits of Network Communication with General Message Sets: A Combinatorial Approach

The classical theoretical framework for communication networks is based on the simplifying assumption that each message to be sent is known to a single transmitter and intended for a single receiver. Modern communication protocols reflect this framework by treating the physical layer as a network of individual links. However, this wireline view of wireless communications fails to account for the heterogeneous nature of network demands, consisting of both unicast and multicast services, and can fail to leverage the inherent broadcast advantage of the wireless medium. This thesis extends the classical framework of a private-message interface to the physical layer to one with both private and common messages. A key difficulty, in both the description and analysis of a communication model with general messages sets, is that there are combinatorially many message possibilities. With order-theoretic language and tools from combinatorial optimization and graphical models, we develop a general framework for characterizing the fundamental limits of information transfer over large many-to-one (multiple access) and one-to-many (broadcast) communication channels with general message sets. In particular, achievable regions are proposed for arbitrary such channels. For the multiple-access channel, the achievable region is optimal, and the order-theoretic perspective both unifies and extends previous results. For the broadcast channel, the region is specialized to an inner bound to the Degree of Freedom region, a setting where it is provably optimal in select cases. This thesis provides fresh insights into the long-standing random coding technique of superposition coding to arrive at these results. Governing constraints on reliable communication through superposition coding are shown to be polymatroidal over a lattice of subsets that may not be the boolean lattice of all subsets. Permissible input distributions for superposition coding are concisely characterized through directed graphical models of conditional dependencies. The two-user interference channel is also addressed, where the state-of-the art is extended from the case with two private messages to one with an additional common message

Custom optimization algorithms for efficient hardware implementation

The focus is on real-time optimal decision making with application in advanced control systems. These computationally intensive schemes, which involve the repeated solution of (convex) optimization problems within a sampling interval, require more efficient computational methods than currently available for extending their application to highly dynamical systems and setups with resource-constrained embedded computing platforms. A range of techniques are proposed to exploit synergies between digital hardware, numerical analysis and algorithm design. These techniques build on top of parameterisable hardware code generation tools that generate VHDL code describing custom computing architectures for interior-point methods and a range of first-order constrained optimization methods. Since memory limitations are often important in embedded implementations we develop a custom storage scheme for KKT matrices arising in interior-point methods for control, which reduces memory requirements significantly and prevents I/O bandwidth limitations from affecting the performance in our implementations. To take advantage of the trend towards parallel computing architectures and to exploit the special characteristics of our custom architectures we propose several high-level parallel optimal control schemes that can reduce computation time. A novel optimization formulation was devised for reducing the computational effort in solving certain problems independent of the computing platform used. In order to be able to solve optimization problems in fixed-point arithmetic, which is significantly more resource-efficient than floating-point, tailored linear algebra algorithms were developed for solving the linear systems that form the computational bottleneck in many optimization methods. These methods come with guarantees for reliable operation. We also provide finite-precision error analysis for fixed-point implementations of first-order methods that can be used to minimize the use of resources while meeting accuracy specifications. The suggested techniques are demonstrated on several practical examples, including a hardware-in-the-loop setup for optimization-based control of a large airliner.Open Acces

Coding and Signal Processing for Secure Wireless Communication

Wireless communication networks are widely deployed today and the networks are used in many applications which require that the data transmitted be secure. Due to the open nature of wireless systems, it is important to have a fundamental understanding of coding schemes that allow for simultaneously secure and reliable transmission. The information theoretic approach is able to give us this fundamental insight into the nature of the coding schemes required for security. The security issue is approached by focusing on the confidentiality of message transmission and reception at the physical layer. The goal is to design coding and signal processing schemes that provide security, in the information theoretic sense. In so doing, we are able to prove the simultaneously secure and reliable transmission rates for different network building blocks. The multi-receiver broadcast channel is an important network building block, where the rate region for the channel without security constraints is still unknown. In the thesis this channel is investigated with security constraints, and the secure and reliable rates are derived for the proposed coding scheme using a random coding argument. Cooperative relaying is next applied to the wiretap channel, the fundamental physical layer model for the communication security problem, and signal processing techniques are used to show that the secure rate can be improved in situations where the secure rate was small due to the eavesdropper enjoying a more favorable channel condition compared to the legitimate receiver. Finally, structured lattice codes are used in the wiretap channel instead of unstructured random codes, used in the vast majority of the work so far. We show that lattice coding and decoding can achieve the secrecy rate of the Gaussian wiretap channel; this is an important step towards realizing practical, explicit codes for the wiretap channel