Performance issues in optical burst/packet switching

The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-642-01524-3_8This chapter summarises the activities on optical packet switching (OPS) and optical burst switching (OBS) carried out by the COST 291 partners in the last 4 years. It consists of an introduction, five sections with contributions on five different specific topics, and a final section dedicated to the conclusions. Each section contains an introductive state-of-the-art description of the specific topic and at least one contribution on that topic. The conclusions give some points on the current situation of the OPS/OBS paradigms

An optical burst reordering model for a time-based burst assembly scheme

Abstract—In optical burst switching networks, contention resolution schemes as well as contention avoidance schemes reduce the burst loss probability. These schemes delay the burst delivery and may change the burst arrival sequence. In this paper we present an analytic burst reordering model and derive analytically the impact of a time-based burst assembly scheme on the burst reordering pattern. Our results hold for a general network delay distribution. We apply the IETF WG IPPM reordering metrics and calculate explicitly three reordering met-rics assuming a general burst delay distribution: the reordering degree, the extent metric for buffer dimensioning and the TCP relevant metric for TCP throughput estimation. We show that our analytic model represents a worst case reordering scenario, which enables studies on the upper layer protocol performance in OBS networks without excessive multi-layer simulations. Index Terms—burst reordering, time-based assembly I

Survey of traffic control schemes and error control schemes for ATM networks

Among the techniques proposed for B-ISDN transfer mode, ATM concept is considered to be the most promising transfer technique because of its flexibility and efficiency. This paper surveys and reviews a number of topics related to ATM networks. Those topics cover congestion control, provision of multiple classes of traffic, and error control. Due to the nature of ATM networks, those issues are far more challenging than in conventional networks. Sorne of the more promising solutions to those issues are surveyed, and the corresponding results on performance are summarized. Future research problems in ATM protocol aspect are also presented

Architecture, design, and modeling of the OPSnet asynchronous optical packet switching node

An all-optical packet-switched network supporting multiple services represents a long-term goal for network operators and service providers alike. The EPSRC-funded OPSnet project partnership addresses this issue from device through to network architecture perspectives with the key objective of the design, development, and demonstration of a fully operational asynchronous optical packet switch (OPS) suitable for 100 Gb/s dense-wavelength-division multiplexing (DWDM) operation. The OPS is built around a novel buffer and control architecture that has been shown to be highly flexible and to offer the promise of fair and consistent packet delivery at high load conditions with full support for quality of service (QoS) based on differentiated services over generalized multiprotocol label switching

Study on the Performance of TCP over 10Gbps High Speed Networks

Internet traffic is expected to grow phenomenally over the next five to ten years. To cope with such large traffic volumes, high-speed networks are expected to scale to capacities of terabits-per-second and beyond. Increasing the role of optics for packet forwarding and transmission inside the high-speed networks seems to be the most promising way to accomplish this capacity scaling. Unfortunately, unlike electronic memory, it remains a formidable challenge to build even a few dozen packets of integrated all-optical buffers. On the other hand, many high-speed networks depend on the TCP/IP protocol for reliability which is typically implemented in software and is sensitive to buffer size. For example, TCP requires a buffer size of bandwidth delay product in switches/routers to maintain nearly 100\% link utilization. Otherwise, the performance will be much downgraded. But such large buffer will challenge hardware design and power consumption, and will generate queuing delay and jitter which again cause problems. Therefore, improve TCP performance over tiny buffered high-speed networks is a top priority. This dissertation studies the TCP performance in 10Gbps high-speed networks. First, a 10Gbps reconfigurable optical networking testbed is developed as a research environment. Second, a 10Gbps traffic sniffing tool is developed for measuring and analyzing TCP performance. New expressions for evaluating TCP loss synchronization are presented by carefully examining the congestion events of TCP. Based on observation, two basic reasons that cause performance problems are studied. We find that minimize TCP loss synchronization and reduce flow burstiness impact are critical keys to improve TCP performance in tiny buffered networks. Finally, we present a new TCP protocol called Multi-Channel TCP and a new congestion control algorithm called Desynchronized Multi-Channel TCP (DMCTCP). Our algorithm implementation takes advantage of a potential parallelism from the Multi-Path TCP in Linux. Over an emulated 10Gbps network ruled by routers with only a few dozen packets of buffers, our experimental results confirm that bottleneck link utilization can be much better improved by DMCTCP than by many other TCP variants. Our study is a new step towards the deployment of optical packet switching/routing networks

Adaptive traffic distribution in optical burst switching networks

Master'sMASTER OF ENGINEERIN

Offset time-emulated architecture for optical burst switching-modelling and performance evaluation

L'evolució de les xarxes publiques de transport de dades destaca per el continu augment de la demanda de tràfic a la que estan sotmeses. La causa és la imparable popularització d'Internet i del seu ús per a tot tipus d'aplicacions. Les xarxes de commutació de ràfegues òptiques (OBS: Optical Bursts Switching) són una solució extraordinàriament prometedora per la pròxima generació de xarxes, tant per la flexibilitat que ofereixen com per el seu alt rendiment fruit de l'explotació de la multiplexació estadística en el domini òptic.Aquesta tesi presenta l'anàlisi, modelització i avaluació de les xarxes de commutació de ràfegues òptiques basades en l'emulació del temps de compensació (emulated offset time: E-OBS). El concepte d'E-OBS defineix una arquitectura de xarxa OBS per al transportar i commutar ràfegues òptiques en una xarxa troncal en la que, al contrari de l'arquitectura convencional (C-OBS) en la que el temps de compensació s'introdueix des dels nodes d'accés, el temps de compensació s'introdueix en cadascun dels nodes de la xarxa per mitjà d'un retardador de fibra addicional. L'arquitectura E-OBS permet superar algunes de les desavantatges inherents a arquitectures C-OBS, però la seva gran virtut és la compatibilitat amb les xarxes de commutació de circuits òptics (OCS: Optical Circuit Switching) actuals i les futures xarxes de commutació de paquets òptics (OPS: Optical Packet Switching), de manera que les xarxes OBS basades en una arquitectura E-OBS) poden facilitat enormement la transició de unes a les altres.A ala vista dels principals requeriments de disseny de les xarxes OBS, que són la resolució de contencions en el domini òptic, la provisió de qualitat de servei (QoS) i l'òptim encaminament de les ràfegues per tal de minimitzar la congestió de la xarxa, . en aquesta tesi es proposa un disseny de l'arquitectura E-OBS basada en (i) un mètode viable per a la provisió del temps de compensació, (ii) una qualitat alta global de servei, i (iii) un mecanisme d'encaminament que minimitzi congestió de xarxa.- La primera part d'aquesta tesi proporciona la informació documental necessària per al disseny d'E-OBS.- La segona part se centra en l'estudi de la funcionalitat i viabilitat de l'arquitectura E-OBS. S'introdueixen els principis d'operació d'E-OBS i s'identifiquen els principals esculls que presenten les arquitectures C-OBS i que deixen de ser-ho en una arquitectura E-OBS. Alguns d'aquests esculls són la dificultat d'utilitzar un algorisme d'encaminament amb rutes alternatives, la complexitat dels algoritmes de reserva de recursos i la seva falta d'equitat, la complexitat en la provisió de la QoS, etc. En aquesta segona part es constata que l'arquitectura E-OBS redueix la complexitat dels de reserva de recursos i es verifica la viabilitat d'operació i de funcionament de la provisió del tremps de compensació en aquesta arquitectura a partir de figures de comportament obtingudes amb retardadors de fibra comercialment disponibles.- La tercera part encara el problema de la provisió de la QoS. Primer s'hi revisen els conceptes bàsics de QoS així com els mecanismes de tractament de la QoS per a xarxes OBS fent-ne una comparació qualitativa i de rendiment de tots ells. Com a resultat s'obté que el mecanisme que presenta un millor comportament és el d'avortament de la transmissió de les ràfegues de més baixa prioritat quan aquestes col·lisionen amb una de prioritat més alta (es l'anomenat Burst Preemption mechanism), el qual en alguns casos presenta un problema de senyalització innecessària. Aquesta tercera part es conclou amb la proposta d'un mecanisme de finestra a afegir al esquema de Burst Preemption que només funciona sobre una arquitectura E-OBS i que soluciona aquest problema.- En la quarta part s'afronta el problema de l'encaminament en xarxes OBS. S'estudia el comportament dels algoritmes d'encaminament adaptatius, els aïllats amb rutes alternatives i els multicamí distribuïts, sobre xarxes E-OBS. A la vista dels resultats no massa satisfactoris que s'obtenen, es planteja una solució alternativa que es basa en model d'optimització no lineal. Es formulen i resolen dos models d'optimització per als algoritmes encaminament de font multicamí que redueixen notablement la congestió en les xarxes OBS.Finalment, aquesta tesi conclou que l'arquitectura E-OBS és factible, que és més eficient que la C-OBS, que proveeix eficaçment QoS, i que és capaç d'operar amb diverses estratègies d'encaminament i de reduir eficaçment la congestió de xarxa.The fact that the Internet is a packet-based connection-less network is the main driver to develop a data-centric transport network. In this context, the optical burst switching (OBS) technology is considered as a promising solution for reducing the gap between transmission and switching speeds in future networks.This thesis presents the analysis, modelling, and evaluation of the OBS network with Emulated offset-time provisioning (E-OBS). E-OBS defines an OBS network architecture to transport and switch optical data bursts in a core network. On the contrary to a conventional offset-time provisioning OBS (C-OBS) architecture, where a transmission offset time is introduced in the edge node, in an E-OBS network the offset time is provided in the core node by means of an additional fibre delay element. The architecture is motivated by several drawbacks inherent to C-OBS architectures. It should be pointed out that the E-OBS has not been studied intensively in the literature and this concept has been considered rather occasionally.Due to the limitations in optical processing and queuing, OBS networks need a special treatment so that they could solve problems typical of data-centric networks. Contention resolution in optical domain together with quality of service (QoS) provisioning for quality demanding services are, among other things, the main designing issues when developing OBS networks. Another important aspect is routing problem, which concerns effective balancing of traffic load so that to reduce burst congestion at overloaded links. Accounting for these requirements, the design objectives for the E-OBS architecture are (i) feasibility of offset-time provisioning, (ii) an overall high quality of service, and (iii) reduction of network congestion. These objectives are achieved by combining selected concepts and strategies, together with appropriate system design as well as network traffic engineering.The contributions in this thesis can be summarized as follows.- At the beginning, we introduce the principles of E-OBS operation and we demonstrate that C-OBS possesses many drawbacks that can be easily avoided in E-OBS. Some of the discussed issues are the problem of unfairness in resources reservation, difficulty with alternative routing, complexity of resources reservation algorithms, efficiency of burst scheduling, and complexity in QoS provisioning. The feasibility of E-OBS operation is investigated as well; in this context, the impact of congestion in control plane on OBS operation is studied. As a result, we confirm the feasibility of E-OBS operation with commercially available fibre delay elements.- Then, we provide both qualitative and quantitative comparison of the selected, most addressed in the literature, QoS mechanisms. As an outcome a burst preemption mechanism, which is characterized by the highest overall performance, is qualified for operating in E-OBS. Since the preemptive mechanism may produce the overbooking of resources in an OBS network we address this issue as well. We propose the preemption window mechanism to solve the problem. An analytical model of the mechanism legitimates correctness of our solution.- Finally, we concern with a routing problem - our routing objective is to help the contention resolution algorithms in the reduction of burst losses. We propose and evaluate two isolated alternative routing algorithms designed for labelled E-OBS networks. Then we study multi-path source routing and we use network optimization theory to improve it. The presented formulae for partial derivatives, to be used in a non-linear optimization problem, are straightforward and very fast to compute. It makes the proposed non-linear optimization method a viable alternative for linear programming formulations based on piecewise linear approximations.Concluding, E-OBS is shown to be a feasible OBS network architecture of profitable functionality, to support efficiently the QoS provisioning, and to be able to operate with different routing strategies and effectively reduce the network congestion

Optically-Connected Memory: Architectures and Experimental Characterizations

Growing demands on future data centers and high-performance computing systems are driving the development of processor-memory interconnects with greater performance and flexibility than can be provided by existing electronic interconnects. A redesign of the systems' memory devices and architectures will be essential to enabling high-bandwidth, low-latency, resilient, energy-efficient memory systems that can meet the challenges of exascale systems and beyond. By leveraging an optics-based approach, this thesis presents the design and implementation of an optically-connected memory system that exploits both the bandwidth density and distance-independent energy dissipation of photonic transceivers, in combination with the flexibility and scalability offered by optical networks. By replacing the electronic memory bus with an optical interconnection network, novel memory architectures can be created that are otherwise infeasible. With remote optically-connected memory nodes accessible to processors as if they are local, programming models can be designed to utilize and efficiently share greater amounts of data. Processors that would otherwise be idle, being starved for data while waiting for scarce memory resources, can instead operate at high utilizations, leading to drastic improvements in the overall system performance. This work presents a prototype optically-connected memory module and a custom processor-based optical-network-aware memory controller that communicate transparently and all-optically across an optical interconnection network. The memory modules and controller are optimized to facilitate memory accesses across the optical network using a packet-switched, circuit-switched, or hybrid packet-and-circuit-switched approach. The novel memory controller is experimentally demonstrated to be compatible with existing processor-memory access protocols, with the memory controller acting as the optics-computing interface to render the optical network transparent. Additionally, the flexibility of the optical network enables additional performance benefits including increased memory bandwidth through optical multicasting. This optically-connected architecture can further enable more resilient memory system realizations by expanding on current error dectection and correction memory protocols. The integration of optics with memory technology constitutes a critical step for both optics and computing. The scalability challenges facing main memory systems today, especially concerning bandwidth and power consumption, complement well with the strengths of optical communications-based systems. Additionally, ongoing efforts focused on developing low-cost optical components and subsystems that are suitable for computing environments may benefit from the high-volume memory market. This work therefore takes the first step in merging the areas of optics and memory, developing the necessary architectures and protocols to interface the two technologies, and demonstrating potential benefits while identifying areas for future work. Future computing systems will undoubtedly benefit from this work through the deployment of high-performance, flexible, energy-efficient optically-connected memory architectures