A novel 2.5D spectral approach for studying thin-walled waveguides with fluid-acoustic interaction

This paper presents a novel formulation of two spectral elements to study guided waves in coupled problems involving thin-walled structures and fluid-acoustic enclosures. The aim of the proposed work is the development of a new efficient computational method to study problems where geometry and properties are invariant in one direction, commonly found in the analysis of guided waves. This assumption allows using a two-and-a-half dimensional (2.5D) spectral formulation in the wavenumber-frequency domain. The novelty of the proposed work is the formulation of spectral plate and fluid elements with an arbitrary order in 2.5D. A plate element based on a Reissner-Mindlin/Kirchhoff-Love mixed formulation is proposed to represent the thin-walled structure. This element uses approximation functions to overcome the difficulties to formulate elements with an arbitrary order from functions. The proposed element uses a substitute transverse shear strain field to avoid shear locking effects. Three benchmark problems are studied to check the convergence and the computational effort for different strategies. Accurate results are found with an appropriate combination of element size and order of the approximation functions allowing at least six nodes per wavelength. The effectiveness of the proposed elements is demonstrated studying the wave propagation in a water duct with a flexible side and an acoustic cavity coupled to a Helmholtz resonator.Ministerio de Economía y Competitividad BIA2013-43085-P y BIA2016-75042-C2-1-RCentro Informático Científico de Andalucía (CICA

A 2.5D BEM-FEM using a spectral approach to study scattered waves in fluid–solid interaction problems

42nd International Conference on Boundary Elements and other Mesh Reduction Methods, BEM/MRM 2019; ITeCons-University of Coimbra, Coimbra; Portugal; 2 July 2019 through 4 July 2019. - Publicado en WIT Transactions on Engineering Sciences, Volume 126, 2019, Pages 111-123This work presents a two-and-a-half dimensional (2.5D) spectral formulation based on the finite element method (FEM) and the boundary element method (BEM) to study wave propagation in acoustic and elastic waveguides. The analysis involved superposing two dimensional (2D) problems with different longitudinal wavenumbers. A spectral finite element (SFEM) is proposed to represent waveguides in solids with arbitrary cross-section. Moreover, the BEM is extended to its spectral formulation (SBEM) to study unbounded fluid media and acoustic enclosures. Both approaches use Lagrange polynomials as element shape functions at the Legendre–Gauss–Lobatto (LGL) points. The fluid and solid subdomains are coupled by applying the appropriate boundary conditions at the limiting interface. The proposed method is verified by means of a benchmark problem regarding the scattering of waves by an elastic inclusion. The convergence and the computational effort are evaluated for different h-p strategies. Numerical results show good agreement with the reference solution. Finally, the proposed method is used to study the pressure field generated by an array of elastic fluid-filled scatterers immersed in an acoustic mediumMinisterio de Economía y Competitividad BIA2016-75042-C2-1-

Transmission loss predictions for dissipative silencers of arbitrary cross section in the presence of mean flow

A numerical technique is developed for the analysis of dissipative silencers of arbitrary, but axially uniform, cross section. Mean gas flow is included in a central airway which is separated from a bulk reacting porous material by a concentric perforate screen. The analysis begins by employing the finite element method to extract the eigenvalues and associated eigenvectors for a silencer of infinite length. Point collocation is then used to match the expanded acoustic pressure and velocity fields in the silencer chamber to those in the inlet and outlet pipes. Transmission loss predictions are compared with experimental measurements taken for two automotive dissipative silencers with elliptical cross sections. Good agreement between prediction and experiment is observed both without mean flow and for a mean flow Mach number of 0.15. It is demonstrated also that the technique presented offers a considerable reduction in computational expenditure when compared to a three dimensional finite element analysis

Free and smooth boundaries in 2-D finite-difference schemes for transient elastic waves

A method is proposed for accurately describing arbitrary-shaped free boundaries in single-grid finite-difference schemes for elastodynamics, in a time-domain velocity-stress framework. The basic idea is as follows: fictitious values of the solution are built in vacuum, and injected into the numerical integration scheme near boundaries. The most original feature of this method is the way in which these fictitious values are calculated. They are based on boundary conditions and compatibility conditions satisfied by the successive spatial derivatives of the solution, up to a given order that depends on the spatial accuracy of the integration scheme adopted. Since the work is mostly done during the preprocessing step, the extra computational cost is negligible. Stress-free conditions can be designed at any arbitrary order without any numerical instability, as numerically checked. Using 10 grid nodes per minimal S-wavelength with a propagation distance of 50 wavelengths yields highly accurate results. With 5 grid nodes per minimal S-wavelength, the solution is less accurate but still acceptable. A subcell resolution of the boundary inside the Cartesian meshing is obtained, and the spurious diffractions induced by staircase descriptions of boundaries are avoided. Contrary to what occurs with the vacuum method, the quality of the numerical solution obtained with this method is almost independent of the angle between the free boundary and the Cartesian meshing.Comment: accepted and to be published in Geophys. J. In

A hybrid finite element approach to modeling sound radiation from circular and rectangular ducts

This is the post-print version of the Article - Copyright @ 2012 Acoustical Society of AmericaA numerical model based on a hybrid finite element method is developed that seeks to join sound pressure fields in interior and exterior regions. The hybrid method is applied to the analysis of sound radiation from open pipes, or ducts, and uses mode matching to couple a finite element discretization of the region surrounding the open end of the duct to wave based modal expansions for adjoining interior and exterior regions. The hybrid method facilitates the analysis of ducts of arbitrary but uniform cross section as well the study of conical flanges and here a modal expansion based on spherical harmonics is applied. Predictions are benchmarked against analytic solutions for the limiting cases of flanged and unflanged circular ducts and excellent agreement between the two methods is observed. Predictions are also presented for flanged and unflanged rectangular ducts, and because the hybrid method retains the sparse banded and symmetric matrices of the traditional finite element method, it is shown that predictions can be obtained within an acceptable time frame even for a three dimensional problem.This study is supported by the U.K. Engineering and Physical Sciences Research Council (EPSRC)

Acoustic modeling using the digital waveguide mesh

The digital waveguide mesh has been an active area of music acoustics research for over ten years. Although founded in 1-D digital waveguide modeling, the principles on which it is based are not new to researchers grounded in numerical simulation, FDTD methods, electromagnetic simulation, etc. This article has attempted to provide a considerable review of how the DWM has been applied to acoustic modeling and sound synthesis problems, including new 2-D object synthesis and an overview of recent research activities in articulatory vocal tract modeling, RIR synthesis, and reverberation simulation. The extensive, although not by any means exhaustive, list of references indicates that though the DWM may have parallels in other disciplines, it still offers something new in the field of acoustic simulation and sound synth