CMOS Data Converters for Closed-Loop mmWave Transmitters

With the increased amount of data consumed in mobile communication systems, new solutions for the infrastructure are needed. Massive multiple input multiple output (MIMO) is seen as a key enabler for providing this increased capacity. With the use of a large number of transmitters, the cost of each transmitter must be low. Closed-loop transmitters, featuring high-speed data converters is a promising option for achieving this reduced unit cost.In this thesis, both digital-to-analog (D/A) and analog-to-digital (A/D) converters suitable for wideband operation in millimeter wave (mmWave) massive MIMO transmitters are demonstrated. A 2 76 bit radio frequency digital-to-analog converter (RF-DAC)-based in-phase quadrature (IQ) modulator is demonstrated as a compact building block, that to a large extent realizes the transmit path in a closed-loop mmWave transmitter. The evaluation of an successive-approximation register (SAR) analog-to-digital converter (ADC) is also presented in this thesis. Methods for connecting simulated and measured performance has been studied in order to achieve a better understanding about the alternating comparator topology.These contributions show great potential for enabling closed-loop mmWave transmitters for massive MIMO transmitter realizations

Wideband CMOS Data Converters for Linear and Efficient mmWave Transmitters

With continuously increasing demands for wireless connectivity, higher\ua0carrier frequencies and wider bandwidths are explored. To overcome a limited transmit power at these higher carrier frequencies, multiple\ua0input multiple output (MIMO) systems, with a large number of transmitters\ua0and antennas, are used to direct the transmitted power towards\ua0the user. With a large transmitter count, each individual transmitter\ua0needs to be small and allow for tight integration with digital circuits. In\ua0addition, modern communication standards require linear transmitters,\ua0making linearity an important factor in the transmitter design.In this thesis, radio frequency digital-to-analog converter (RF-DAC)-based transmitters are explored. They shift the transition from digital\ua0to analog closer to the antennas, performing both digital-to-analog\ua0conversion and up-conversion in a single block. To reduce the need for\ua0computationally costly digital predistortion (DPD), a linear and wellbehaved\ua0RF-DAC transfer characteristic is desirable. The combination\ua0of non-overlapping local oscillator (LO) signals and an expanding segmented\ua0non-linear RF-DAC scaling is evaluated as a way to linearize\ua0the transmitter. This linearization concept has been studied both for\ua0the linearization of the RF-DAC itself and for the joint linearization of\ua0the cascaded RF-DAC-based modulator and power amplifier (PA) combination.\ua0To adapt the linearization, observation receivers are needed.\ua0In these, high-speed analog-to-digital converters (ADCs) have a central\ua0role. A high-speed ADC has been designed and evaluated to understand\ua0how concepts used to increase the sample rate affect the dynamic performance

Multiband Analog-to-Digital Conversion

The current trend in the world of digital communications is the design of versatile devices that may operate using several different communication standards in order to increase the number of locations for which a particular device may be used. The signal is quantized early on in the reciever path by Analog-to-Digital Converters (ADCs), which allows the rest of the signal processing to be done by low complexity, low power digital circuits. For this reason, it is advantageous to create an architecture that can quantize different bandwidths at different frequencies to suit several different communication protocols. This thesis outlines the design of an architecture that uses multiple ADCs in parallel to quantize several different bandwidths of a wideband signal. A multirate filter bank is then applied to approximate perfect reconstruction of the wideband signal from its subband parts. This highly flexible architecture is able to quantize signals of varying bandwidths at a wide range of frequencies by using identical hardware in every channel, which also makes for a simple design. A prototype for the quantizer used in each channel, a frequency-selective fourth-order sigma-delta (CA ) ADC, was designed and fabricated in a 0.5 pm CMOS process. This device uses a switched-capacitor technique to implement the frequency selection in the front-end of the CA ADC in each channel. Running at a 5MHz sample rate, the device can select any of the first sixteen 156.25kHz wide bands for conversion. Testing results for this fabricated part are also presented

A survey on OFDM-based elastic core optical networking

Orthogonal frequency-division multiplexing (OFDM) is a modulation technology that has been widely adopted in many new and emerging broadband wireless and wireline communication systems. Due to its capability to transmit a high-speed data stream using multiple spectral-overlapped lower-speed subcarriers, OFDM technology offers superior advantages of high spectrum efficiency, robustness against inter-carrier and inter-symbol interference, adaptability to server channel conditions, etc. In recent years, there have been intensive studies on optical OFDM (O-OFDM) transmission technologies, and it is considered a promising technology for future ultra-high-speed optical transmission. Based on O-OFDM technology, a novel elastic optical network architecture with immense flexibility and scalability in spectrum allocation and data rate accommodation could be built to support diverse services and the rapid growth of Internet traffic in the future. In this paper, we present a comprehensive survey on OFDM-based elastic optical network technologies, including basic principles of OFDM, O-OFDM technologies, the architectures of OFDM-based elastic core optical networks, and related key enabling technologies. The main advantages and issues of OFDM-based elastic core optical networks that are under research are also discussed

86-GBaud subcarrier multiplexed 16QAM signal generation using an electrical 90 degree hybrid and IQ mixers

We experimentally demonstrate an aggregate 86-GBaud (over three sub-bands and one polarization) signal generation based on subcarrier multiplexing technique using IQ mixers, an electrical 90 degree hybrid, and diplexers. The electrical hybrid allows transmitter-side digital signal processing to be simplified to pulse shaping and digital pre-emphasis. We verified the configuration by testing the performance of an 86-GBaud Nyquist-shaped 16 quadrature amplitude modulation signal with differential bit encoding. The implementation penalty assuming 7% hard-decision forward error correction is reduced to 2 dB by utilizing a 31-tap decision-directed least mean square based multiple-input multiple-output equalizer for sideband crosstalk mitigation

A Flexible RFIC Architecture for High-Sensitivity Reception and Compressed-Sampling Wideband Detection

Compressed sensing (CS) is a new signal processing approach that has disrupted the Shannon-Nyquist limit based design methodology and has opened promising avenues for building energy-efficient radio frequency integrated circuits (RFICs) for detecting and estimating particular classes (i.e. sparse) of signals. Whether in application domains where naturally occurring signals are sparse or where representations of signals subject to the fidelity limits or configuration settings of the radio equipment are often found to be sparse, the emergence of CS has forced us to re-imagine the radio receiver. While realizing some of the potential benefits promised by theory, CS-RFIC architectures proposed in earlier research were not particularly suitable for mass-market applications. This thesis demonstrates how to take a new signal processing technique all the way to the hardware level. So far, the main focus in literature has been how CS offers a significant advantage for signal processing. This work will show how CS techniques drive novel architectures down to the integrated circuit level. This requires close collaboration between communication system developers, integrated circuit designers and signal processing experts. The trans-disciplinary approach presented here has led to the unification of CS-inspired architectures for wideband signal detection with robust, legacy architectures for high-sensitivity signal reception. The result is a functionally flexible and rapidly reconfigurable CMOS RFIC compactly implemented on silicon with the potential to achieve the cost, size and power targets in mass-market applications. While the focus of this thesis is RF signal finding and reception in frequency, the CS-based RFIC design approach presented here is applicable to a wide range of other applications like direction-of-arrival and range finding. We begin by developing a signal-model driven approach for optimizing the performance of CS RF frontends (RFFEs). We consider sparse multiband signals with supports contained within a frequency span extending from fMIN to fMAX. The resulting quadrature analog-to-information converter (QAIC) is a flexible-bandwidth, blind sub-Nyquist sampling architecture optimized for energy consumption and sensitivity performance. The QAIC addresses key drawbacks of earlier CS RFFE architectures like the modulated wideband converter (MWC) that implement frequency spans extending from 0 to fMAX. While these earlier architectures, a direct implementation of CS signal processing theory, have several beneficial properties, the true cost of their proposed analog frontend significantly diminishes the sensitivity performance and energy savings that CS methods have the potential to deliver. They use periodic pseudo-random bit sequence (PRBS) generators where the clock frequency fPRBS scales up with the maximum signal frequency fMAX. In contrast, fPRBS in the QAIC RFFE scales up with the instantaneous bandwidth IBW, where IBW = ( fMAX − fMIN ). This results in significant performance advantages in terms of energy consumption and sensitivity performance. The QAIC uncouples fPRBS from fMAX by performing wideband quadrature downconversion ahead of analog mixing with PRBSs at an intermediate frequency (IF). However, the dual heterodyne architecture of the QAIC suffers from spurious responses at IF caused by gain and phase imbalance in its wideband downconverter. We then show how the direct RF-to-information converter (DRF2IC) compactly adds CS wideband detection to a direct conversion frequency-translational noise-cancelling (FTNC) receiver by introducing pseudo-random modulation of the local oscillator (LO) signals and by consolidating multiple CS measurements into one hardware branch. The DRF2IC inherits benefits of the FTNC receiver in signal reception mode. In CS wideband detection mode, the DRF2IC inherits key advantages from both the earlier lowpass CS architectures and the QAIC while avoiding the drawbacks of both. It uncouples fPRBS from fMAX in contrast with the MWC. In contrast with the QAIC, the DRF2IC employs a direct conversion RF chain with narrow bandwidth analog components at baseband thereby avoiding frequency-dependent gain and phase imbalance. The DRF2IC chip occupies 0.56mm2 area in 65nm CMOS. In reception mode, it consumes 46.5mW from 1.15V and delivers 40MHz RF bandwidth, 41.5dB conversion gain, 3.6dB noise figure (NF) and -2dBm blocker 1dB compression point (B1dB). In CS wideband detection mode, 66dB operational dynamic range, 40dB instantaneous dynamic range and 1.43GHz instantaneous bandwidth are demonstrated and 6 interferers each 10MHz wide scattered over a 1.27GHz span are detected in 1.2us consuming 58.5mW

Programmable rate modem utilizing digital signal processing techniques

The engineering development study to follow was written to address the need for a Programmable Rate Digital Satellite Modem capable of supporting both burst and continuous transmission modes with either binary phase shift keying (BPSK) or quadrature phase shift keying (QPSK) modulation. The preferred implementation technique is an all digital one which utilizes as much digital signal processing (DSP) as possible. Here design tradeoffs in each portion of the modulator and demodulator subsystem are outlined, and viable circuit approaches which are easily repeatable, have low implementation losses and have low production costs are identified. The research involved for this study was divided into nine technical papers, each addressing a significant region of concern in a variable rate modem design. Trivial portions and basic support logic designs surrounding the nine major modem blocks were omitted. In brief, the nine topic areas were: (1) Transmit Data Filtering; (2) Transmit Clock Generation; (3) Carrier Synthesizer; (4) Receive AGC; (5) Receive Data Filtering; (6) RF Oscillator Phase Noise; (7) Receive Carrier Selectivity; (8) Carrier Recovery; and (9) Timing Recovery

Design and Implementation of an RF Front-End for Software Defined Radios

Software Defined Radios have brought a major reformation in the design standards for radios, in which a large portion of the functionality is implemented through pro­ grammable signal processing devices, giving the radio the ability to change its op­ erating parameters to accommodate new features and capabilities. A software radio approach reduces the content of radio frequency and other analog components of the traditional radios and emphasizes digital signal processing to enhance overall receiver flexibility. Field Programmable Gate Arrays (FPGA) are a suitable technology for the hardware platform as they offer the potential of hardware-like performance coupled with software-like programmability. Software defined radio is a very broad field, encompassing the design of various technologies all the way from the antenna to RF, IF, and baseband digital design. The RF section primarily consists of analog hardware modules. The IF and baseband sections are primarily digital. It is the general process of the radio to convert the incoming signal from RF to IF and then IF to baseband for better signal processing system. In this thesis, some of major building blocks of a Software defined radio are de­ signed and implemented using FPGAs. The design of a Digital front end, which provides the bridge between the baseband and analog RF portions of a wireless receiver, is synthesized. The Digital front end receiver consists of a digital down converter(DDC) which in turn comprises of a direct digital frequency synthesizer (DDFS), a phase accumulator and a low pass filter. The signal processing block of the DDFS is executed using Co-ordinate Rotation Digital Computer (CORDIC) iii Abstract algorithm. Cascaded-Integrator-Comb filters (CIC) are implemented for changing the sample rate of the incoming data. Application of a DDC includes software ra­ dios, multicarrier, multimode digital receivers, micro and pico cell systems,broadband data applications, instrumentation and test equipment and in-building wireless tele­ phony. Also, in this thesis, interfaces for connecting Texas Instruments high speed and high resolution Analog-to-Digital converters (ADC) and Digital-to-Analog converters (DAC) with Xilinx Virtex-5 FPGAs are also implemented and demonstrated

Time-based circuits for communication systems in advanced CMOS technology

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from student submitted PDF version of thesis.Includes bibliographical references (p. 145-151).As device size scales down, there have been challenges to design conventional analog circuits, such as low voltage headroom and the low intrinsic gain of a device. Although ever-decreasing device channel length in CMOS technology has mainly negative effects on analog circuits, it increases device speed and reduces the power consumption of digital circuits. As a result, time-based signal processing has been attracting attention because time-based circuits take advantage of high speed and low power devices to deal with analog information in the time domain. In this thesis, we focus on a ring oscillator as a core time-based circuit for communication systems. Ring oscillators are employed in analog-to-time conversion or time-to-digital conversion. In this work, we present A/D converters and an RF modulator based on ring oscillators in deep sub-micron CMOS processes. We introduce a VCO-based [sigma][delta] A/D converter utilizing a voltage-controlled ring oscillator (ring VCO) as a continuous-time integrator. We propose to replace conventional integrators designed with analog circuits in a [sigma][delta] modulator with a ring VCO and a phase detector, thereby implementing an A/D converter without traditional analog circuits. We also propose a single-slope A/D converter using time-to-digital conversion. By combining a few analog circuits and a ring oscillator based Time-to-Digital Converter (TDC), we achieve highly digital A/D conversion. Finally, we demonstrate a VCO-based RF modulator. The proposed RF modulator generates an RF signal by simply switching transistors. As opposed to an RFDAC approach, the proposed RF modulator is not limited by quantization noise because it employs multiphase PWM signals. A VCO-based OP amp is also introduced as an alternative method of designing an OP amp in deep sub-micron CMOS. The proposed VCO-based OP amp is utilized to generate the multiphase PWM signals in the RF modulator. This thesis also presents the fundamental limitations of a ring oscillator as a timebased circuit. Although the idea of time-based signal processing employing a ring oscillator has its own limitations such as non-linear tuning characteristics and phase noise, the basic idea is worth investigating to solve the serious problems of analog circuits for future CMOS technology.by Min Park.Ph.D