Data compression techniques applied to high resolution high frame rate video technology

An investigation is presented of video data compression applied to microgravity space experiments using High Resolution High Frame Rate Video Technology (HHVT). An extensive survey of methods of video data compression, described in the open literature, was conducted. The survey examines compression methods employing digital computing. The results of the survey are presented. They include a description of each method and assessment of image degradation and video data parameters. An assessment is made of present and near term future technology for implementation of video data compression in high speed imaging system. Results of the assessment are discussed and summarized. The results of a study of a baseline HHVT video system, and approaches for implementation of video data compression, are presented. Case studies of three microgravity experiments are presented and specific compression techniques and implementations are recommended

Discrete Wavelet Transforms

The discrete wavelet transform (DWT) algorithms have a firm position in processing of signals in several areas of research and industry. As DWT provides both octave-scale frequency and spatial timing of the analyzed signal, it is constantly used to solve and treat more and more advanced problems. The present book: Discrete Wavelet Transforms: Algorithms and Applications reviews the recent progress in discrete wavelet transform algorithms and applications. The book covers a wide range of methods (e.g. lifting, shift invariance, multi-scale analysis) for constructing DWTs. The book chapters are organized into four major parts. Part I describes the progress in hardware implementations of the DWT algorithms. Applications include multitone modulation for ADSL and equalization techniques, a scalable architecture for FPGA-implementation, lifting based algorithm for VLSI implementation, comparison between DWT and FFT based OFDM and modified SPIHT codec. Part II addresses image processing algorithms such as multiresolution approach for edge detection, low bit rate image compression, low complexity implementation of CQF wavelets and compression of multi-component images. Part III focuses watermaking DWT algorithms. Finally, Part IV describes shift invariant DWTs, DC lossless property, DWT based analysis and estimation of colored noise and an application of the wavelet Galerkin method. The chapters of the present book consist of both tutorial and highly advanced material. Therefore, the book is intended to be a reference text for graduate students and researchers to obtain state-of-the-art knowledge on specific applications

Energy-precision tradeoffs in the graphics pipeline

The energy consumption of a graphics processing unit (GPU) is an important factor in its design, whether for a server, desktop, or mobile device. Mobile products, such as smart phones, tablets, and laptop computers, rely on batteries to function; the less the demand for power is on these batteries, the longer they will last before needing to be recharged. GPUs used in servers and desktops, while not dependent on a battery for operation, are still limited by the efficiency of power supplies and heat dissipation techniques. In this dissertation, I propose to lower the energy consumption of GPUs by reducing the precision of floating-point arithmetic in the graphics pipeline and the data sent and stored on- and off-chip. The key idea behind this work is twofold: energy can be saved through a systematic and targeted reduction in the number of bits 1) computed and 2) communicated. Reducing the number of bits computed will necessarily reduce either the precision or range of a floating point number. I focus on saving energy by way of reducing precision, which can exploit the over-provisioning of bits in many stages of the graphics pipeline. Reducing the number of bits communicated takes several forms. First, I propose enhancements to existing compression schemes for off-chip buffers to save bandwidth. I also suggest a simple extension that exploits unused bits in reduced-precision data undergoing compression. Finally, I present techniques for saving energy in on-chip communication of reduced-precision data. By designing and simulating variable-precision arithmetic circuits with promising energy versus precision characteristics and tradeoffs, I have developed an energy model for GPUs. Using this model and my techniques, I have shown that significant savings (up to 70% in computation in the vertex and pixel shader stages) are possible by reducing the precision of the arithmetic. Further, my compression approaches have enabled improvements of 1.26x over past work, and a general-purpose compressor design has achieved bandwidth savings of 34%, 87%, and 65% for color, depth, and geometry data, respectively, which is competitive with past work. Lastly, an initial exploration in signal gating unused lines in on-chip buses has suggested savings of 13-48% for the tested applications' traffic from a multiprocessor's register file to its L1 cache

Towards a High Quality Real-Time Graphics Pipeline

Modern graphics hardware pipelines create photorealistic images with high geometric complexity in real time. The quality is constantly improving and advanced techniques from feature film visual effects, such as high dynamic range images and support for higher-order surface primitives, have recently been adopted. Visual effect techniques have large computational costs and significant memory bandwidth usage. In this thesis, we identify three problem areas and propose new algorithms that increase the performance of a set of computer graphics techniques. Our main focus is on efficient algorithms for the real-time graphics pipeline, but parts of our research are equally applicable to offline rendering. Our first focus is texture compression, which is a technique to reduce the memory bandwidth usage. The core idea is to store images in small compressed blocks which are sent over the memory bus and are decompressed on-the-fly when accessed. We present compression algorithms for two types of texture formats. High dynamic range images capture environment lighting with luminance differences over a wide intensity range. Normal maps store perturbation vectors for local surface normals, and give the illusion of high geometric surface detail. Our compression formats are tailored to these texture types and have compression ratios of 6:1, high visual fidelity, and low-cost decompression logic. Our second focus is tessellation culling. Culling is a commonly used technique in computer graphics for removing work that does not contribute to the final image, such as completely hidden geometry. By discarding rendering primitives from further processing, substantial arithmetic computations and memory bandwidth can be saved. Modern graphics processing units include flexible tessellation stages, where rendering primitives are subdivided for increased geometric detail. Images with highly detailed models can be synthesized, but the incurred cost is significant. We have devised a simple remapping technique that allowsfor better tessellation distribution in screen space. Furthermore, we present programmable tessellation culling, where bounding volumes for displaced geometry are computed and used to conservatively test if a primitive can be discarded before tessellation. We introduce a general tessellation culling framework, and an optimized algorithm for rendering of displaced Bézier patches, which is expected to be a common use case for graphics hardware tessellation. Our third and final focus is forward-looking, and relates to efficient algorithms for stochastic rasterization, a rendering technique where camera effects such as depth of field and motion blur can be faithfully simulated. We extend a graphics pipeline with stochastic rasterization in spatio-temporal space and show that stochastic motion blur can be rendered with rather modest pipeline modifications. Furthermore, backface culling algorithms for motion blur and depth of field rendering are presented, which are directly applicable to stochastic rasterization. Hopefully, our work in this field brings us closer to high quality real-time stochastic rendering

Efficient reconfigurable architectures for 3D medical image compression

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Recently, the more widespread use of three-dimensional (3-D) imaging modalities, such as magnetic resonance imaging (MRI), computed tomography (CT), positron emission tomography (PET), and ultrasound (US) have generated a massive amount of volumetric data. These have provided an impetus to the development of other applications, in particular telemedicine and teleradiology. In these fields, medical image compression is important since both efficient storage and transmission of data through high-bandwidth digital communication lines are of crucial importance. Despite their advantages, most 3-D medical imaging algorithms are computationally intensive with matrix transformation as the most fundamental operation involved in the transform-based methods. Therefore, there is a real need for high-performance systems, whilst keeping architectures exible to allow for quick upgradeability with real-time applications. Moreover, in order to obtain efficient solutions for large medical volumes data, an efficient implementation of these operations is of significant importance. Reconfigurable hardware, in the form of field programmable gate arrays (FPGAs) has been proposed as viable system building block in the construction of high-performance systems at an economical price. Consequently, FPGAs seem an ideal candidate to harness and exploit their inherent advantages such as massive parallelism capabilities, multimillion gate counts, and special low-power packages. The key achievements of the work presented in this thesis are summarised as follows. Two architectures for 3-D Haar wavelet transform (HWT) have been proposed based on transpose-based computation and partial reconfiguration suitable for 3-D medical imaging applications. These applications require continuous hardware servicing, and as a result dynamic partial reconfiguration (DPR) has been introduced. Comparative study for both non-partial and partial reconfiguration implementation has shown that DPR offers many advantages and leads to a compelling solution for implementing computationally intensive applications such as 3-D medical image compression. Using DPR, several large systems are mapped to small hardware resources, and the area, power consumption as well as maximum frequency are optimised and improved. Moreover, an FPGA-based architecture of the finite Radon transform (FRAT)with three design strategies has been proposed: direct implementation of pseudo-code with a sequential or pipelined description, and block random access memory (BRAM)- based method. An analysis with various medical imaging modalities has been carried out. Results obtained for image de-noising implementation using FRAT exhibits promising results in reducing Gaussian white noise in medical images. In terms of hardware implementation, promising trade-offs on maximum frequency, throughput and area are also achieved. Furthermore, a novel hardware implementation of 3-D medical image compression system with context-based adaptive variable length coding (CAVLC) has been proposed. An evaluation of the 3-D integer transform (IT) and the discrete wavelet transform (DWT) with lifting scheme (LS) for transform blocks reveal that 3-D IT demonstrates better computational complexity than the 3-D DWT, whilst the 3-D DWT with LS exhibits a lossless compression that is significantly useful for medical image compression. Additionally, an architecture of CAVLC that is capable of compressing high-definition (HD) images in real-time without any buffer between the quantiser and the entropy coder is proposed. Through a judicious parallelisation, promising results have been obtained with limited resources. In summary, this research is tackling the issues of massive 3-D medical volumes data that requires compression as well as hardware implementation to accelerate the slowest operations in the system. Results obtained also reveal a significant achievement in terms of the architecture efficiency and applications performance.Ministry of Higher Education Malaysia (MOHE), Universiti Tun Hussein Onn Malaysia (UTHM) and the British Counci

Dynamically reconfigurable management of energy, performance, and accuracy applied to digital signal, image, and video Processing Applications

There is strong interest in the development of dynamically reconfigurable systems that can meet real-time constraints in energy/power-performance-accuracy (EPA/PPA). In this dissertation, I introduce a framework for implementing dynamically reconfigurable digital signal, image, and video processing systems. The basic idea is to first generate a collection of Pareto-optimal realizations in the EPA/PPA space. Dynamic EPA/PPA management is then achieved by selecting the Pareto-optimal implementations that can meet the real-time constraints. The systems are then demonstrated using Dynamic Partial Reconfiguration (DPR) and dynamic frequency control on FPGAs. The framework is demonstrated on: i) a dynamic pixel processor, ii) a dynamically reconfigurable 1-D digital filtering architecture, and iii) a dynamically reconfigurable 2-D separable digital filtering system. Efficient implementations of the pixel processor are based on the use of look-up tables and local-multiplexes to minimize FPGA resources. For the pixel-processor, different realizations are generated based on the number of input bits, the number of cores, the number of output bits, and the frequency of operation. For each parameters combination, there is a different pixel-processor realization. Pareto-optimal realizations are selected based on measurements of energy per frame, PSNR accuracy, and performance in terms of frames per second. Dynamic EPA/PPA management is demonstrated for a sequential list of real-time constraints by selecting optimal realizations and implementing using DPR and dynamic frequency control. Efficient FPGA implementations for the 1-D and 2-D FIR filters are based on the use a distributed arithmetic technique. Different realizations are generated by varying the number of coefficients, coefficient bitwidth, and output bitwidth. Pareto-optimal realizations are selected in the EPA space. Dynamic EPA management is demonstrated on the application of real-time EPA constraints on a digital video. The results suggest that the general framework can be applied to a variety of digital signal, image, and video processing systems. It is based on the use of offline-processing that is used to determine the Pareto-optimal realizations. Real-time constraints are met by selecting Pareto-optimal realizations pre-loaded in memory that are then implemented efficiently using DPR and/or dynamic frequency control

A survey of visual preprocessing and shape representation techniques

Many recent theories and methods proposed for visual preprocessing and shape representation are summarized. The survey brings together research from the fields of biology, psychology, computer science, electrical engineering, and most recently, neural networks. It was motivated by the need to preprocess images for a sparse distributed memory (SDM), but the techniques presented may also prove useful for applying other associative memories to visual pattern recognition. The material of this survey is divided into three sections: an overview of biological visual processing; methods of preprocessing (extracting parts of shape, texture, motion, and depth); and shape representation and recognition (form invariance, primitives and structural descriptions, and theories of attention)