The impact of random doping effects on CMOS SRAM cell

The SRAM has a very constrained cell area and is consequently sensitive to the intrinsic parameter fluctuations ubiquitous in decananometer scale MOSFETs. Using a statistical circuit simulation methodology, which can fully collate intrinsic parameter fluctuation information into compact model sets, the impact of random device doping on 6-T SRAM static noise margins, and read and write characteristics are investigated in detail for well-scaled 35 nm physical gate length devices. We conclude that intrinsic parameter fluctuations will become a major limitation to further conventional MOSFET SRAM scaling

UTB SOI SRAM cell stability under the influence of intrinsic parameter fluctuation

Intrinsic parameter fluctuations steadily increases with CMOS technology scaling. Around the 90nm technology node, such fluctuations will eliminate much of the available noise margin in SRAM based on conventional MOSFETs. Ultra thin body (UTB) SOI MOSFETs are expected to replace conventional MOSFETs for integrated memory applications due to superior electrostatic integrity and better resistant to some of the sources of intrinsic parameter fluctuations. To fully realise the performance benefits of UTB SOI based SRAM cells a statistical circuit simulation methodology which can fully capture intrinsic parameter fluctuation information into the compact model is developed. The impact on 6T SRAM static noise margin characteristics of discrete random dopants in the source/drain regions and body-thickness variations has been investigated for well scaled devices with physical channel length in the range of 10nm to 5nm. A comparison with the behaviour of a 6T SRAM based on a conventional 35nm MOSFET is also presented

Using pMOS Pass-Gates to Boost SRAM Performance by Exploiting Strain Effects in Sub-20-nm FinFET Technologies

Strained fin is one of the techniques used to improve the devices as their size keeps reducing in new nanoscale nodes. In this paper, we use a predictive technology of 14 nm where pMOS mobility is significantly improved when those devices are built on top of long, uncut fins, while nMOS devices present the opposite behavior due to the combination of strains. We explore the possibility of boosting circuit performance in repetitive structures where long uncut fins can be exploited to increase fin strain impact. In particular, pMOS pass-gates are used in 6T complementary SRAM cells (CSRAM) with reinforced pull-ups. Those cells are simulated under process variability and compared to the regular SRAM. We show that when layout dependent effects are considered the CSRAM design provides 10% to 40% faster access time while keeping the same area, power, and stability than a regular 6T SRAM cell. The conclusions also apply to 8T SRAM cells. The CSRAM cell also presents increased reliability in technologies whose nMOS devices have more mismatch than pMOS transistors

A Survey on Layout Implementation and Analysis of Different SRAM Cell Topologies

Because powered widgets are frequently used, the primary goal of electronics is to design low-power devices. Because of its applications in low-energy computing, memory cell operation with low voltage consumption has become a major interest in memory cell design. Because of specification changes in scaled methodologies, the only critical method for the success of low-voltage SRAM design is the stable operation of SRAM. The traditional SRAM cell enables high-density and fast differential sensing but suffers from semi-selective and read-risk issues. The simulation results show that the proposed design provides the fastest read operation and overall power delay product optimization. Compared to the current topologies of 6T, 8T, and 10T, while a traditional SRAM cell solves the reading disruption problem, previous strategies for solving these problems have been ineffective due to low efficiency, data-dependent leakage, and high energy per connection. Our primary goal is to reduce power consumption, improve read performance, and reduce the area and power of the proposed design cell work. The proposed leakage reduction design circuit has been implemented on the micro-wind tool. Delay and power consumption are important factors in memory cell performance. The primary goal of this project is to create a low-power SRAM cell

Memristor MOS Content Addressable Memory (MCAM): Hybrid Architecture for Future High Performance Search Engines

Large-capacity Content Addressable Memory (CAM) is a key element in a wide variety of applications. The inevitable complexities of scaling MOS transistors introduce a major challenge in the realization of such systems. Convergence of disparate technologies, which are compatible with CMOS processing, may allow extension of Moore's Law for a few more years. This paper provides a new approach towards the design and modeling of Memristor (Memory resistor) based Content Addressable Memory (MCAM) using a combination of memristor MOS devices to form the core of a memory/compare logic cell that forms the building block of the CAM architecture. The non-volatile characteristic and the nanoscale geometry together with compatibility of the memristor with CMOS processing technology increases the packing density, provides for new approaches towards power management through disabling CAM blocks without loss of stored data, reduces power dissipation, and has scope for speed improvement as the technology matures.Comment: 10 pages, 11 figure

Low Leakage and Robust Sub-threshold SRAM Cell using Memristor

This work aims to improve the total power dissipation, leakage currents and stability without disturbing the logic state of SRAM cell with concept called sub-threshold operation. Though, sub-threshold SRAM proves to be advantageous but fails with basic 6T SRAM cell during readability and writability. In this paper we have investigated a non-volatile 6T2M (6 Transistors & 2 Memristors) sub-threshold SRAM cell working at lower supply voltage of VDD=0.3V, where Memristor is used to store the information even at power failures and restores previous data with successful read and write operation overcomes the challenge faced. This paper also proposes a new configuration of non-volatile 6T2M (6 Transistors & 2 Memristors) sub-threshold SRAM cell resulting in improved behaviour in terms of power, stability and leakage current where read and write power has improved by 40% and 90% respectively when compared to 6T2M (conventional) SRAM cell. The proposed 6T2M SRAM cell offers good stability of RSNM=65mV and WSNM=93mV which is much improved at low voltage when compared to conventional basic 6T SRAM cell, and improved leakage current of 4.92nA is achieved as compared

Skybridge-3D-CMOS: A Fine-Grained Vertical 3D-CMOS Technology Paving New Direction for 3D IC

2D CMOS integrated circuit (IC) technology scaling faces severe challenges that result from device scaling limitations, interconnect bottleneck that dominates power and performance, etc. 3D ICs with die-die and layer-layer stacking using Through Silicon Vias (TSVs) and Monolithic Inter-layer Vias (MIVs) have been explored in recent years to generate circuits with considerable interconnect saving for continuing technology scaling. However, these 3D IC technologies still rely on conventional 2D CMOS’s device, circuit and interconnect mindset showing only incremental benefits while adding new challenges reliability issues, robustness of power delivery network design and short-channel effects as technology node scaling. Skybridge-3D-CMOS (S3DC) is a fine-grained 3D IC fabric that uses vertically-stacked gates and 3D interconnections composed on vertical nanowires to yield orders of magnitude benefits over 2D ICs. This 3D fabric fully uses the vertical dimension instead of relying on a multi-layered 2D mindset. Its core fabric aspects including device, circuit-style, interconnect and heat-extraction components are co-architected considering the major challenges in 3D IC technology. In S3DC, the 3D interconnections provide greater routing capacity in both vertical and horizontal directions compared to conventional 3D ICs, which eliminates the routability issue in conventional 3D IC technology while enabling ultra-high density design and significant benefits over 2D. Also, the improved vertical routing capacity in S3DC is beneficial for achieving robust and high-density power delivery network (PDN) design while conventional 3D IC has design issues in PDN design due to limited routing resource in vertical direction. Additionally, the 3D gate-all-around transistor incorporating with 3D interconnect in S3DC enables significant SRAM design benefits and good tolerance of process variation compared to conventional 3D IC technology as well as 2D CMOS. The transistor-level (TR-L) monolithic 3D IC (M3D) is the state-of-the-art monolithic 3D technology which shows better benefits than other M3D approaches as well as the TSV-based 3D IC approach. The S3DC is evaluated in large-scale benchmark circuits with comparison to TR-L M3D as well as 2D CMOS. Skybridge yields up to 3x lower power against 2D with no routing congestion in benchmark circuits while TR-L M3D only has up-to 22% power saving with severe routing congestions in the design. The PDN design in S3DC show

Static random-access memory designs based on different FinFET at lower technology node (7nm)

Title from PDF of title page viewed January 15, 2020Thesis advisor: Masud H ChowdhuryVitaIncludes bibliographical references (page 50-57)Thesis (M.S.)--School of Computing and Engineering. University of Missouri--Kansas City, 2019The Static Random-Access Memory (SRAM) has a significant performance impact on current nanoelectronics systems. To improve SRAM efficiency, it is important to utilize emerging technologies to overcome short-channel effects (SCE) of conventional CMOS. FinFET devices are promising emerging devices that can be utilized to improve the performance of SRAM designs at lower technology nodes. In this thesis, I present detail analysis of SRAM cells using different types of FinFET devices at 7nm technology. From the analysis, it can be concluded that the performance of both 6T and 8T SRAM designs are improved. 6T SRAM achieves a 44.97% improvement in the read energy compared to 8T SRAM. However, 6T SRAM write energy degraded by 3.16% compared to 8T SRAM. Read stability and write ability of SRAM cells are determined using Static Noise Margin and N- curve methods. Moreover, Monte Carlo simulations are performed on the SRAM cells to evaluate process variations. Simulations were done in HSPICE using 7nm Asymmetrical Underlap FinFET technology. The quasiplanar FinFET structure gained considerable attention because of the ease of the fabrication process [1] – [4]. Scaling of technology have degraded the performance of CMOS designs because of the short channel effects (SCEs) [5], [6]. Therefore, there has been upsurge in demand for FinFET devices for emerging market segments including artificial intelligence and cloud computing (AI) [8], [9], Internet of Things (IoT) [10] – [13] and biomedical [17] –[18] which have their own exclusive style of design. In recent years, many Underlapped FinFET devices were proposed to have better control of the SCEs in the sub-nanometer technologies [3], [4], [19] – [33]. Underlap on either side of the gate increases effective channel length as seen by the charge carriers. Consequently, the source-to-drain tunneling probability is improved. Moreover, edge direct tunneling leakage components can be reduced by controlling the electric field at the gate-drain junction . There is a limitation on the extent of underlap on drain or source sides because the ION is lower for larger underlap. Additionally, FinFET based designs have major width quantization issue. The width of a FinFET device increases only in quanta of silicon fin height (HFIN) [4]. The width quantization issue becomes critical for ratioed designs like SRAMs, where proper sizing of the transistors is essential for fault-free operation. FinFETs based on Design/Technology Co-Optimization (DTCO_F) approach can overcome these issues [38]. DTCO_F follows special design rules, which provides the specifications for the standard SRAM cells with special spacing rules and low leakages. The performances of 6T SRAM designs implemented by different FinFET devices are compared for different pull-up, pull down and pass gate transistor (PU: PD:PG) ratios to identify the best FinFET device for high speed and low power SRAM applications. Underlapped FinFETs (UF) and Design/Technology Co-Optimized FinFETs (DTCO_F) are used for the design and analysis. It is observed that with the PU: PD:PG ratios of 1:1:1 and 1:5:2 for the UF-SRAMs the read energy has degraded by 3.31% and 48.72% compared to the DTCO_F-SRAMs, respectively. However, the read energy with 2:5:2 ratio has improved by 32.71% in the UF-SRAM compared to the DTCO_F-SRAMs. The write energy with 1:1:1 configuration has improved by 642.27% in the UF-SRAM compared to the DTCO_F-SRAM. On the other hand, the write energy with 1:5:2 and 2:5:2 configurations have degraded by 86.26% and 96% in the UF-SRAMs compared to the DTCO_F-SRAMs. The stability and reliability of different SRAMs are also evaluated for 500mV supply. From the analysis, it can be concluded that Asymmetrical Underlapped FinFET is better for high-speed applications and DTCO FinFET for low power applications.Introduction -- Next generation high performance device: FinFET -- FinFET based SRAM bitcell designs -- Benchmarking of UF-SRAMs and DTCO-F-SRAMS -- Collaborative project -- Internship experience at INTEL and Marvell Semiconductor -- Conclusion and future wor

On the Critical Role of Ferroelectric Thickness for Negative Capacitance Device-Circuit Interaction

This paper demonstrates the critical role that Ferroelectric (FE) layer thickness (tFE) plays in Negative Capacitance (NC) transistors connecting device and circuit levels together. The study is done through fully-calibrated TCAD simulations for a 14nm FDSOI technology node, exploring the impact of tFE on the figures of merit of n-type and p-type devices, voltage transfer characteristic (VTC) and noise margin of inverter as well as the speed of buffer circuits. First, we analyze the device electrical parameters (e.g., ION, SS, ION/IOFF and Cgg) by varying tFE up to the maximum level at which hysteresis in the I-V characteristic starts. Then, we analyze the deleterious impact of Negative Differential Resistance (NDR), due to the drain to gate coupling, demonstrating how it imposes an additional constraint limiting the maximum tFE. We show the consequences of NDR effects on the VTC and noise margin of inverter, which are essential components for constructing robust clock trees in any chip. We demonstrate how the considerable increase in the gate’s capacitance due to FE seriously degrades the circuit’s performance imposing further constraints limiting the maximum tFE. Further, we analyze the impact of tFE on the SRAM cell static performance metrics such hold noise margin (HNM), read noise margin (RNM) and write noise margin (WNM) at supply voltages of 0.7V and 0.4V. We demonstrate that the HNM and RNM in a NC-FDSOI FET based SRAM cell are higher then those of the baseline FDSOI FET based SRAM cell noise margin and further increase with tFE. However, the WNM in general follows a non monotonic trend w.r.t tFE, and the trend also depends on the supply voltage. Finally, we optimize the design of the SRAM cell considering overall performance metrics. All in all, our analysis provides guidance for device and circuit designers to select the optimal FE thickness for NCFETs in which hysteresis-free operations, reliability, and performance are optimized

Memory Module Design for High-Temperature Applications in SiC CMOS Technology

The wide bandgap (WBG) characteristics of SiC play a significant and disruptive role in the power electronics industry. The same characteristics make this material a viable choice for high-temperature electronics systems. Leveraging the high-temperature capability of SiC is crucial to automotive, space exploration, aerospace, deep well drilling, and gas turbines. A significant issue with the high-temperature operation is the exponential increase in leakage current. The lower intrinsic carrier concentration of SiC (10-9 cm-3) compared to Si (1010 cm-3) leads to lower leakage over temperature. Several researchers have demonstrated analog and digital circuits designed in SiC. However, a memory module is required to realize a complete electronic system in SiC that bridges the gap between data processing and data storage. Designing memory that can process massive amounts of data in harsh environments while consuming low power opens doors for future electronics. A novel static random-access memory (SRAM) cell is designed and implemented in a SiC 1 µm triple well CMOS process for high-temperature applications in this work. The prevalent issues encountered during SiC fabrication and the uncertainties in device performance led to 6T SRAM cell design modifications that enable adaptability to the worst and the best cases. However, design trade-offs are made in the design size, the number of transistors, number of I/Os, and the cell\u27s power consumption. The novel SRAM cell design mitigates the effect of poor p-type contacts after the device fabrication by controlling the cell\u27s drive strength via an additional pull-up network. The design also includes two parallel access transistors and separate wordlines that control both access transistors. This individual control enables post-fabrication tunability in the cell ratio (CR) and the pull-up (PR) ratio of the cell. It also allows tuning the access transistors\u27 effective width during a data read operation, and a data write operation, independently. Along with the SRAM cell design, the conventional latch-based sense amplifier is also designed in the SiC CMOS process to realize the monolithic memory IC modules. The SRAM cell performance is evaluated on the basis of static noise margin (SNM), write SNM (WSNM), read SNM (RSNM), leakage current, and read access time over a wide temperature range (25ºC to 500ºC) on three uniquely processed wafers. The noise margins measured on Wafer #2 show a lower leakage current of ~500 nA at 500ºC with the supply voltage of 10 V. The SNM of 6.07 V is measured at 500ºC with a 10 V of power supply. The read access time at 400ºC is ~7.5 µs at a supply voltage of 10 V