Design Tools for Dynamic, Data-Driven, Stream Mining Systems

The proliferation of sensing devices and cost- and energy-efficient embedded processors has contributed to an increasing interest in adaptive stream mining (ASM) systems. In this class of signal processing systems, knowledge is extracted from data streams in real-time as the data arrives, rather than in a store-now, process later fashion. The evolution of machine learning methods in many application areas has contributed to demands for efficient and accurate information extraction from streams of data arriving at distributed, mobile, and heterogeneous processing nodes. To enhance accuracy, and meet the stringent constraints in which they must be deployed, it is important for ASM systems to be effective in adapting knowledge extraction approaches and processing configurations based on data characteristics and operational conditions. In this thesis, we address these challenges in design and implementation of ASM systems. We develop systematic methods and supporting design tools for ASM systems that integrate (1) foundations of dataflow modeling for high level signal processing system design, and (2) the paradigm on Dynamic Data-Driven Application Systems (DDDAS). More specifically, the contributions of this thesis can be broadly categorized in to three major directions: 1. We develop a new design framework that systematically applies dataflow methodologies for high level signal processing system design, and adaptive stream mining based on dynamic topologies of classifiers. In particular, we introduce a new design environment, called the lightweight dataflow for dynamic data driven application systems environment (LiD4E). LiD4E provides formal semantics, rooted in dataflow principles, for design and implementation of a broad class of stream mining topologies. Using this novel application of dataflow methods, LiD4E facilitates the efficient and reliable mapping and adaptation of classifier topologies into implementations on embedded platforms. 2. We introduce new design methods for data-driven digital signal processing (DSP) systems that are targeted to resource- and energy-constrained embedded environments, such as unmanned areal vehicles (UAVs), mobile communication platforms, and wireless sensor networks. We develop a design and implementation framework for multi-mode, data driven embedded signal processing systems, where application modes with complementary trade-offs are selected, configured, executed, and switched dynamically, in a data-driven manner. We demonstrate the utility of our proposed new design methods on an energy-constrained, multi-mode face detection application. 3. We introduce new methods for multiobjective, system-level optimization that have been incorporated into the LiD4E design tool described previously. More specifically, we develop new methods for integrated modeling and optimization of real-time stream mining constraints, multidimensional stream mining performance (e.g., precision and recall), and energy efficiency. Using a design methodology centered on data-driven control of and coordination between alternative dataflow subsystems for stream mining (classification modes), we develop systematic methods for exploring complex, multidimensional design spaces associated with dynamic stream mining systems, and deriving sets of Pareto-optimal system configurations that can be switched among based on data characteristics and operating constraints

A Robust Topological Preliminary Design Exploration Method with Materials Design Applications

A paradigm shift is underway in which the classical materials selection approach in engineering design is being replaced by the design of material structure and processing paths on a hierarchy of length scales for specific multifunctional performance requirements. In this dissertation, the focus is on designing mesoscopic material and product topology?? geometric arrangement of solid phases and voids on length scales larger than microstructures but smaller than the characteristic dimensions of an overall product. Increasingly, manufacturing, rapid prototyping, and materials processing techniques facilitate tailoring topology with high levels of detail. Fully leveraging these capabilities requires not only computational models but also a systematic, efficient design method for exploring, refining, and evaluating product and material topology and other design parameters for targeted multifunctional performance that is robust with respect to potential manufacturing, design, and operating variations. In this dissertation, the Robust Topological Preliminary Design Exploration Method is presented for designing complex multi-scale products and materials by topologically and parametrically tailoring them for multifunctional performance that is superior to that of standard designs and less sensitive to variations. A comprehensive robust design method is established for topology design applications. It includes computational techniques, guidelines, and a multiobjective decision formulation for evaluating and minimizing the impact of topological and parametric variation on the performance of a preliminary topological design. A method is also established for multifunctional topology design, including thermal topology design techniques and multi-stage, distributed design methods for designing preliminary topologies with built-in flexibility for subsequent modification for enhanced performance in secondary functional domains. Key aspects of the approach are demonstrated by designing linear cellular alloys??ered metallic cellular materials with extended prismatic cells?? three applications. Heat exchangers are designed with increased heat dissipation and structural load bearing capabilities relative to conventional heat sinks for microprocessor applications. Cellular materials are designed with structural properties that are robust to dimensional and topological imperfections such as missing cell walls. Finally, combustor liners are designed to increase operating temperatures and efficiencies and reduce harmful emissions for next-generation turbine engines via active cooling and load bearing within topologically and parametrically customized cellular materials.Ph.D.Committee Chair: Farrokh Mistree; Committee Co-Chair: David L. McDowell; Committee Co-Chair: Janet K. Allen; Committee Member: Christiaan J. J. Paredis; Committee Member: David W. Rosen; Committee Member: Joe K. Cochran; Committee Member: Kwok Tsu

Doctor of Philosophy

dissertationEmerging trends such as growing architectural diversity and increased emphasis on energy and power efficiency motivate the need for code that adapts to its execution context (input dataset and target architecture). Unfortunately, writing such code remains difficult, and is typically attempted only by a small group of motivated expert programmers who are highly knowledgeable about the relationship between software and its hardware mapping. In this dissertation, we introduce novel abstractions and techniques based on automatic performance tuning that enable both experts and nonexperts (application developers) to produce adaptive code. We present two new frameworks for adaptive programming: Nitro and Surge. Nitro enables expert programmers to specify code variants, or alternative implementations of the same computation, together with meta-information for selecting among them. It then utilizes supervised classification to select an optimal code variant at runtime based on characteristics of the execution context. Surge, on the other hand, provides a high-level nested data-parallel programming interface for application developers to specify computations. It then employs a two-level mechanism to automatically generate code variants and then tunes them using Nitro. The resulting code performs on par with or better than handcrafted reference implementations on both CPUs and GPUs. In addition to abstractions for expressing code variants, this dissertation also presents novel strategies for adaptively tuning them. First, we introduce a technique for dynamically selecting an optimal code variant at runtime based on characteristics of the input dataset. On five high-performance GPU applications, variants tuned using this strategy achieve over 93% of the performance of variants selected through exhaustive search. Next, we present a novel approach based on multitask learning to develop a code variant selection model on a target architecture from training on different source architectures. We evaluate this approach on a set of six benchmark applications and a collection of six NVIDIA GPUs from three distinct architecture generations. Finally, we implement support for combined code variant and frequency selection based on multiple objectives, including power and energy efficiency. Using this strategy, we construct a GPU sorting implementation that provides improved energy and power efficiency with less than a proportional drop in sorting throughput

Model-based symbolic design space exploration at the electronic system level: a systematic approach

In this thesis, a novel, fully systematic approach is proposed that addresses the automated design space exploration at the electronic system level. The problem is formulated as multi-objective optimization problem and is encoded symbolically using Answer Set Programming (ASP). Several specialized solvers are tightly coupled as background theories with the foreground ASP solver under the ASP modulo Theories (ASPmT) paradigm. By utilizing the ASPmT paradigm, the search is executed entirely systematically and the disparate synthesis steps can be coupled to explore the search space effectively.In dieser Arbeit wird ein vollständig systematischer Ansatz präsentiert, der sich mit der Entwurfsraumexploration auf der elektronischen Systemebene befasst. Das Problem wird als multikriterielles Optimierungsproblem formuliert und symbolisch mit Hilfe von Answer Set Programming (ASP) kodiert. Spezialisierte Solver sind im Rahmen des ASP modulo Theories (ASPmT) Paradigmas als Hintergrundtheorien eng mit dem ASP Solver gekoppelt. Durch die Verwendung von ASPmT wird die Suche systematisch ausgeführt und die individuellen Schritte können gekoppelt werden, um den Suchraum effektiv zu durchsuchen

Cross-Layer Rapid Prototyping and Synthesis of Application-Specific and Reconfigurable Many-accelerator Platforms

Technological advances of recent years laid the foundation consolidation of informatisationof society, impacting on economic, political, cultural and socialdimensions. At the peak of this realization, today, more and more everydaydevices are connected to the web, giving the term ”Internet of Things”. The futureholds the full connection and interaction of IT and communications systemsto the natural world, delimiting the transition to natural cyber systems and offeringmeta-services in the physical world, such as personalized medical care, autonomoustransportation, smart energy cities etc. . Outlining the necessities of this dynamicallyevolving market, computer engineers are required to implement computingplatforms that incorporate both increased systemic complexity and also cover awide range of meta-characteristics, such as the cost and design time, reliabilityand reuse, which are prescribed by a conflicting set of functional, technical andconstruction constraints. This thesis aims to address these design challenges bydeveloping methodologies and hardware/software co-design tools that enable therapid implementation and efficient synthesis of architectural solutions, which specifyoperating meta-features required by the modern market. Specifically, this thesispresents a) methodologies to accelerate the design flow for both reconfigurableand application-specific architectures, b) coarse-grain heterogeneous architecturaltemplates for processing and communication acceleration and c) efficient multiobjectivesynthesis techniques both at high abstraction level of programming andphysical silicon level.Regarding to the acceleration of the design flow, the proposed methodologyemploys virtual platforms in order to hide architectural details and drastically reducesimulation time. An extension of this framework introduces the systemicco-simulation using reconfigurable acceleration platforms as co-emulation intermediateplatforms. Thus, the development cycle of a hardware/software productis accelerated by moving from a vertical serial flow to a circular interactive loop.Moreover the simulation capabilities are enriched with efficient detection and correctiontechniques of design errors, as well as control methods of performancemetrics of the system according to the desired specifications, during all phasesof the system development. In orthogonal correlation with the aforementionedmethodological framework, a new architectural template is proposed, aiming atbridging the gap between design complexity and technological productivity usingspecialized hardware accelerators in heterogeneous systems-on-chip and networkon-chip platforms. It is presented a novel co-design methodology for the hardwareaccelerators and their respective programming software, including the tasks allocationto the available resources of the system/network. The introduced frameworkprovides implementation techniques for the accelerators, using either conventionalprogramming flows with hardware description language or abstract programmingmodel flows, using techniques from high-level synthesis. In any case, it is providedthe option of systemic measures optimization, such as the processing speed,the throughput, the reliability, the power consumption and the design silicon area.Finally, on addressing the increased complexity in design tools of reconfigurablesystems, there are proposed novel multi-objective optimization evolutionary algo-rithms which exploit the modern multicore processors and the coarse-grain natureof multithreaded programming environments (e.g. OpenMP) in order to reduce theplacement time, while by simultaneously grouping the applications based on theirintrinsic characteristics, the effectively explore the design space effectively.The efficiency of the proposed architectural templates, design tools and methodologyflows is evaluated in relation to the existing edge solutions with applicationsfrom typical computing domains, such as digital signal processing, multimedia andarithmetic complexity, as well as from systemic heterogeneous environments, suchas a computer vision system for autonomous robotic space navigation and manyacceleratorsystems for HPC and workstations/datacenters. The results strengthenthe belief of the author, that this thesis provides competitive expertise to addresscomplex modern - and projected future - design challenges.Οι τεχνολογικές εξελίξεις των τελευταίων ετών έθεσαν τα θεμέλια εδραίωσης της πληροφοριοποίησης της κοινωνίας, επιδρώντας σε οικονομικές,πολιτικές, πολιτιστικές και κοινωνικές διαστάσεις. Στο απόγειο αυτής τη ςπραγμάτωσης, σήμερα, ολοένα και περισσότερες καθημερινές συσκευές συνδέονται στο παγκόσμιο ιστό, αποδίδοντας τον όρο «Ίντερνετ των πραγμάτων».Το μέλλον επιφυλάσσει την πλήρη σύνδεση και αλληλεπίδραση των συστημάτων πληροφορικής και επικοινωνιών με τον φυσικό κόσμο, οριοθετώντας τη μετάβαση στα συστήματα φυσικού κυβερνοχώρου και προσφέροντας μεταυπηρεσίες στον φυσικό κόσμο όπως προσωποποιημένη ιατρική περίθαλψη, αυτόνομες μετακινήσεις, έξυπνες ενεργειακά πόλεις κ.α. . Σκιαγραφώντας τις ανάγκες αυτής της δυναμικά εξελισσόμενης αγοράς, οι μηχανικοί υπολογιστών καλούνται να υλοποιήσουν υπολογιστικές πλατφόρμες που αφενός ενσωματώνουν αυξημένη συστημική πολυπλοκότητα και αφετέρου καλύπτουν ένα ευρύ φάσμα μεταχαρακτηριστικών, όπως λ.χ. το κόστος σχεδιασμού, ο χρόνος σχεδιασμού, η αξιοπιστία και η επαναχρησιμοποίηση, τα οποία προδιαγράφονται από ένα αντικρουόμενο σύνολο λειτουργικών, τεχνολογικών και κατασκευαστικών περιορισμών. Η παρούσα διατριβή στοχεύει στην αντιμετώπιση των παραπάνω σχεδιαστικών προκλήσεων, μέσω της ανάπτυξης μεθοδολογιών και εργαλείων συνσχεδίασης υλικού/λογισμικού που επιτρέπουν την ταχεία υλοποίηση καθώς και την αποδοτική σύνθεση αρχιτεκτονικών λύσεων, οι οποίες προδιαγράφουν τα μετα-χαρακτηριστικά λειτουργίας που απαιτεί η σύγχρονη αγορά. Συγκεκριμένα, στα πλαίσια αυτής της διατριβής, παρουσιάζονται α) μεθοδολογίες επιτάχυνσης της ροής σχεδιασμού τόσο για επαναδιαμορφούμενες όσο και για εξειδικευμένες αρχιτεκτονικές, β) ετερογενή αδρομερή αρχιτεκτονικά πρότυπα επιτάχυνσης επεξεργασίας και επικοινωνίας και γ) αποδοτικές τεχνικές πολυκριτηριακής σύνθεσης τόσο σε υψηλό αφαιρετικό επίπεδο προγραμματισμού,όσο και σε φυσικό επίπεδο πυριτίου.Αναφορικά προς την επιτάχυνση της ροής σχεδιασμού, προτείνεται μια μεθοδολογία που χρησιμοποιεί εικονικές πλατφόρμες, οι οποίες αφαιρώντας τις αρχιτεκτονικές λεπτομέρειες καταφέρνουν να μειώσουν σημαντικά το χρόνο εξομοίωσης. Παράλληλα, εισηγείται η συστημική συν-εξομοίωση με τη χρήση επαναδιαμορφούμενων πλατφορμών, ως μέσων επιτάχυνσης. Με αυτόν τον τρόπο, ο κύκλος ανάπτυξης ενός προϊόντος υλικού, μετατεθειμένος από την κάθετη σειριακή ροή σε έναν κυκλικό αλληλεπιδραστικό βρόγχο, καθίσταται ταχύτερος, ενώ οι δυνατότητες προσομοίωσης εμπλουτίζονται με αποδοτικότερες μεθόδους εντοπισμού και διόρθωσης σχεδιαστικών σφαλμάτων, καθώς και μεθόδους ελέγχου των μετρικών απόδοσης του συστήματος σε σχέση με τις επιθυμητές προδιαγραφές, σε όλες τις φάσεις ανάπτυξης του συστήματος. Σε ορθογώνια συνάφεια με το προαναφερθέν μεθοδολογικό πλαίσιο, προτείνονται νέα αρχιτεκτονικά πρότυπα που στοχεύουν στη γεφύρωση του χάσματος μεταξύ της σχεδιαστικής πολυπλοκότητας και της τεχνολογικής παραγωγικότητας, με τη χρήση συστημάτων εξειδικευμένων επιταχυντών υλικού σε ετερογενή συστήματα-σε-ψηφίδα καθώς και δίκτυα-σε-ψηφίδα. Παρουσιάζεται κατάλληλη μεθοδολογία συν-σχεδίασης των επιταχυντών υλικού και του λογισμικού προκειμένου να αποφασισθεί η κατανομή των εργασιών στους διαθέσιμους πόρους του συστήματος/δικτύου. Το μεθοδολογικό πλαίσιο προβλέπει την υλοποίηση των επιταχυντών είτε με συμβατικές μεθόδους προγραμματισμού σε γλώσσα περιγραφής υλικού είτε με αφαιρετικό προγραμματιστικό μοντέλο με τη χρήση τεχνικών υψηλού επιπέδου σύνθεσης. Σε κάθε περίπτωση, δίδεται η δυνατότητα στο σχεδιαστή για βελτιστοποίηση συστημικών μετρικών, όπως η ταχύτητα επεξεργασίας, η ρυθμαπόδοση, η αξιοπιστία, η κατανάλωση ενέργειας και η επιφάνεια πυριτίου του σχεδιασμού. Τέλος, προκειμένου να αντιμετωπισθεί η αυξημένη πολυπλοκότητα στα σχεδιαστικά εργαλεία επαναδιαμορφούμενων συστημάτων, προτείνονται νέοι εξελικτικοί αλγόριθμοι πολυκριτηριακής βελτιστοποίησης, οι οποίοι εκμεταλλευόμενοι τους σύγχρονους πολυπύρηνους επεξεργαστές και την αδρομερή φύση των πολυνηματικών περιβαλλόντων προγραμματισμού (π.χ. OpenMP), μειώνουν το χρόνο επίλυσης του προβλήματος της τοποθέτησης των λογικών πόρων σε φυσικούς,ενώ ταυτόχρονα, ομαδοποιώντας τις εφαρμογές βάση των εγγενών χαρακτηριστικών τους, διερευνούν αποτελεσματικότερα το χώρο σχεδίασης.Η αποδοτικότητά των προτεινόμενων αρχιτεκτονικών προτύπων και μεθοδολογιών επαληθεύτηκε σε σχέση με τις υφιστάμενες λύσεις αιχμής τόσο σε αυτοτελής εφαρμογές, όπως η ψηφιακή επεξεργασία σήματος, τα πολυμέσα και τα προβλήματα αριθμητικής πολυπλοκότητας, καθώς και σε συστημικά ετερογενή περιβάλλοντα, όπως ένα σύστημα όρασης υπολογιστών για αυτόνομα διαστημικά ρομποτικά οχήματα και ένα σύστημα πολλαπλών επιταχυντών υλικού για σταθμούς εργασίας και κέντρα δεδομένων, στοχεύοντας εφαρμογές υψηλής υπολογιστικής απόδοσης (HPC). Τα αποτελέσματα ενισχύουν την πεποίθηση του γράφοντα, ότι η παρούσα διατριβή παρέχει ανταγωνιστική τεχνογνωσία για την αντιμετώπιση των πολύπλοκων σύγχρονων και προβλεπόμενα μελλοντικών σχεδιαστικών προκλήσεων

Guiding evolutionary search towards innovative solutions

The main goal of this work is to develop a method that, operating on top of an Evolutionary Algorithm, increases its likeliness of finding innovative solutions. This likeliness is laid out to be increased with the diversity of the solutions found, provided that they are of sufficient quality. The developed method needs to be applicable in a scenario in which the search is required to be started from a single, fixed solution. Therefore, a scheme is envisioned in which the search is performed in a sequential fashion, zooming in on a locally-optimal solution, and then exploring for a new potentially high-quality region based on a memory of solutions encountered earlier in the search. Two exploration criteria, one using an archive of earlier solutions as memory and the other deriving from a surrogate model trained on earlier solutions, were established to be worthwhile for integration into quality-based search. The resulting schemes were applied to a real-world airfoil optimization task, showing both to perform better than the baseline method of multiple standard optimization runs. The model-based approach delivers the best results, in the sense that it finds more solutions, more diverse solutions, and better-quality solutions than the baseline method.Honda Research Institute Europe (HRI-EU)Algorithms and the Foundations of Software technolog

New strategies for the aerodynamic design optimization of aeronautical configurations through soft-computing techniques

Premio Extraordinario de Doctorado de la UAH en 2013Lozano Rodríguez, Carlos, codir.This thesis deals with the improvement of the optimization process in the aerodynamic design of aeronautical configurations. Nowadays, this topic is of great importance in order to allow the European aeronautical industry to reduce their development and operational costs, decrease the time-to-market for new aircraft, improve the quality of their products and therefore maintain their competitiveness. Within this thesis, a study of the state-of-the-art of the aerodynamic optimization tools has been performed, and several contributions have been proposed at different levels: -One of the main drawbacks for an industrial application of aerodynamic optimization tools is the huge requirement of computational resources, in particular, for complex optimization problems, current methodological approaches would need more than a year to obtain an optimized aircraft. For this reason, one proposed contribution of this work is focused on reducing the computational cost by the use of different techniques as surrogate modelling, control theory, as well as other more software-related techniques as code optimization and proper domain parallelization, all with the goal of decreasing the cost of the aerodynamic design process. -Other contribution is related to the consideration of the design process as a global optimization problem, and, more specifically, the use of evolutionary algorithms (EAs) to perform a preliminary broad exploration of the design space, due to their ability to obtain global optima. Regarding this, EAs have been hybridized with metamodels (or surrogate models), in order to substitute expensive CFD simulations. In this thesis, an innovative approach for the global aerodynamic optimization of aeronautical configurations is proposed, consisting of an Evolutionary Programming algorithm hybridized with a Support Vector regression algorithm (SVMr) as a metamodel. Specific issues as precision, dataset training size, geometry parameterization sensitivity and techniques for design of experiments are discussed and the potential of the proposed approach to achieve innovative shapes that would not be achieved with traditional methods is assessed. -Then, after a broad exploration of the design space, the optimization process is continued with local gradient-based optimization techniques for a finer improvement of the geometry. Here, an automated optimization framework is presented to address aerodynamic shape design problems. Key aspects of this framework include the use of the adjoint methodology to make the computational requirements independent of the number of design variables, and Computer Aided Design (CAD)-based shape parameterization, which uses the flexibility of Non-Uniform Rational B-Splines (NURBS) to handle complex configurations. The mentioned approach is applied to the optimization of several test cases and the improvements of the proposed strategy and its ability to achieve efficient shapes will complete this study