A comparative study of calibration methods for low-cost ozone sensors in IoT platforms

© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper shows the result of the calibration process of an Internet of Things platform for the measurement of tropospheric ozone (O 3 ). This platform, formed by 60 nodes, deployed in Italy, Spain, and Austria, consisted of 140 metal–oxide O 3 sensors, 25 electro-chemical O 3 sensors, 25 electro-chemical NO 2 sensors, and 60 temperature and relative humidity sensors. As ozone is a seasonal pollutant, which appears in summer in Europe, the biggest challenge is to calibrate the sensors in a short period of time. In this paper, we compare four calibration methods in the presence of a large dataset for model training and we also study the impact of a limited training dataset on the long-range predictions. We show that the difficulty in calibrating these sensor technologies in a real deployment is mainly due to the bias produced by the different environmental conditions found in the prediction with respect to those found in the data training phase.Peer ReviewedPostprint (author's final draft

Artificial Neural Network-based error compensation procedure for low-cost encoders

An Artificial Neural Network-based error compensation method is proposed for improving the accuracy of resolver-based 16-bit encoders by compensating for their respective systematic error profiles. The error compensation procedure, for a particular encoder, involves obtaining its error profile by calibrating it on a precision rotary table, training the neural network by using a part of this data and then determining the corrected encoder angle by subtracting the ANN-predicted error from the measured value of the encoder angle. Since it is not guaranteed that all the resolvers will have exactly similar error profiles because of the inherent differences in their construction on a micro scale, the ANN has been trained on one error profile at a time and the corresponding weight file is then used only for compensating the systematic error of this particular encoder. The systematic nature of the error profile for each of the encoders has also been validated by repeated calibration of the encoders over a period of time and it was found that the error profiles of a particular encoder recorded at different epochs show near reproducible behavior. The ANN-based error compensation procedure has been implemented for 4 encoders by training the ANN with their respective error profiles and the results indicate that the accuracy of encoders can be improved by nearly an order of magnitude from quoted values of ~6 arc-min to ~0.65 arc-min when their corresponding ANN-generated weight files are used for determining the corrected encoder angle.Comment: 16 pages, 4 figures. Accepted for Publication in Measurement Science and Technology (MST

Wireless sensors and IoT platform for intelligent HVAC control

Energy consumption of buildings (residential and non-residential) represents approximately 40% of total world electricity consumption, with half of this energy consumed by HVAC systems. Model-Based Predictive Control (MBPC) is perhaps the technique most often proposed for HVAC control, since it offers an enormous potential for energy savings. Despite the large number of papers on this topic during the last few years, there are only a few reported applications of the use of MBPC for existing buildings, under normal occupancy conditions and, to the best of our knowledge, no commercial solution yet. A marketable solution has been recently presented by the authors, coined the IMBPC HVAC system. This paper describes the design, prototyping and validation of two components of this integrated system, the Self-Powered Wireless Sensors and the IOT platform developed. Results for the use of IMBPC in a real building under normal occupation demonstrate savings in the electricity bill while maintaining thermal comfort during the whole occupation schedule.QREN SIDT [38798]; Portuguese Foundation for Science & Technology, through IDMEC, under LAETA [ID/EMS/50022/2013

Artificial Intelligence-based Control Techniques for HVDC Systems

The electrical energy industry depends, among other things, on the ability of networks to deal with uncertainties from several directions. Smart-grid systems in high-voltage direct current (HVDC) networks, being an application of artificial intelligence (AI), are a reliable way to achieve this goal as they solve complex problems in power system engineering using AI algorithms. Due to their distinctive characteristics, they are usually effective approaches for optimization problems. They have been successfully applied to HVDC systems. This paper presents a number of issues in HVDC transmission systems. It reviews AI applications such as HVDC transmission system controllers and power flow control within DC grids in multi-terminal HVDC systems. Advancements in HVDC systems enable better performance under varying conditions to obtain the optimal dynamic response in practical settings. However, they also pose difficulties in mathematical modeling as they are non-linear and complex. ANN-based controllers have replaced traditional PI controllers in the rectifier of the HVDC link. Moreover, the combination of ANN and fuzzy logic has proven to be a powerful strategy for controlling excessively non-linear loads. Future research can focus on developing AI algorithms for an advanced control scheme for UPFC devices. Also, there is a need for a comprehensive analysis of power fluctuations or steady-state errors that can be eliminated by the quick response of this control scheme. This survey was informed by the need to develop adaptive AI controllers to enhance the performance of HVDC systems based on their promising results in the control of power systems. Doi: 10.28991/ESJ-2023-07-02-024 Full Text: PD

Health Condition Assessment of Multi-Chip IGBT Module with Magnetic Flux Density

To achieve efficient conversion and flexible control of electronic energy, insulated gate bipolar transistor (IGBT) power modules as the dominant power semiconductor devices are increasingly applied in many areas such as electric drives, hybrid electric vehicles, railways, and renewable energy systems. It is known that IGBTs are the most vulnerable components in power converter systems. To achieve high power density and high current capability, several IGBT chips are connected in parallel as a multi-chip IGBT module, which makes the power modules less reliable due to a more complex structure. The lowered reliability of IGBT modules will not only cause safety problems but also increase operation costs due to the failure of IGBT modules. Therefore, the reliability of IGBTs is important for the overall system, especially in high power applications. To improve the reliability of IGBT modules, this thesis proposes a new health state assessment model with a more sensitive precursor parameter for multi-chip IGBT module that allows for condition-based maintenance and replacement prior to complete failure. Accurate health condition monitoring depends on the knowledge of failure mechanism and the selection of highly sensitive failure precursor. IGBT modules normally wear out and fail due to thermal cycling and operating environment. To enhance the understanding of the failure mechanism and the external characteristic performance of multi-chip IGBT modules, an electro-thermal finite element model (FEM) of a multi-chip IGBT module used in wind turbine converter systems was established with considerations for temperature dependence of material property, the thermal coupling effect between components, and the heat transfer process. The electro-thermal FEM accurately performed temperature distribution and the distribution electrical characteristic parameters during chip solder degradation. This study found an increased junction temperature, large change of temperature distribution, and more serious imbalanced current sharing during a single chip solder aging, thereby accelerating the aging of the whole IGBT module. According to the change of thermal and electrical parameters with chip solder fatigue, the sensitivity of fatigue sensitive parameters (FSPs) was analyzed. The collector current of the aging chip showed the highest sensitivity with the chip solder degradation compared with the junction temperature, case temperature, and collector-emitter voltage. However, the current distribution of internal components remains inaccessible through direct measurements or visual inspection due to the package. As the relationship between the current and magnetic field has been studied and gradually applied in sensor technologies, magnetic flux density was proposed instead of collector current as a new precursor for health condition monitoring. Magnetic flux density distribution was extracted by an electro-thermal-magnetic FEM of the multi-chip IGBT module based on electromagnetic theory. Simulation results showed that magnetic flux density had even higher sensitivity than collector current with chip solder degradation. In addition, the magnetic flux density was only related with the current and was not influenced by temperature, which suggested good selectivity. Therefore, the magnetic flux density was selected as the precursor due to its better sensitivity, selectivity, and generality. Finally, a health state assessment model based on backpropagation neural network (BPNN) was established according to the selected precursor. To localize and evaluate chip solder degradation, the health state of the IGBT module was determined by the magnetic flux density for each chip and the corresponding operating conduction current. BPNN featured good self-learning, self-adapting, robustness and generalization ability to deal with the nonlinear relationship between the four inputs and health state. Experimental results showed that the proposed model was accurate and effective. The health status of the IGBT modules was effectively recognized with an overall recognition rate of 99.8%. Therefore, the health state assessment model built in this thesis can accurately evaluate current health state of the IGBT module and support condition-based maintenance of the IGBT module

Meta-heuristic algorithms in car engine design: a literature survey

Meta-heuristic algorithms are often inspired by natural phenomena, including the evolution of species in Darwinian natural selection theory, ant behaviors in biology, flock behaviors of some birds, and annealing in metallurgy. Due to their great potential in solving difficult optimization problems, meta-heuristic algorithms have found their way into automobile engine design. There are different optimization problems arising in different areas of car engine management including calibration, control system, fault diagnosis, and modeling. In this paper we review the state-of-the-art applications of different meta-heuristic algorithms in engine management systems. The review covers a wide range of research, including the application of meta-heuristic algorithms in engine calibration, optimizing engine control systems, engine fault diagnosis, and optimizing different parts of engines and modeling. The meta-heuristic algorithms reviewed in this paper include evolutionary algorithms, evolution strategy, evolutionary programming, genetic programming, differential evolution, estimation of distribution algorithm, ant colony optimization, particle swarm optimization, memetic algorithms, and artificial immune system

Robust MPPT Control of Stand-Alone Photovoltaic Systems via Adaptive Self-Adjusting Fractional Order PID Controller

The Photovoltaic (PV) system is an eco-friendly renewable energy system that is integrated with a DC-DC buck-boost converter to generate electrical energy as per the variations in solar irradiance and outdoor temperature. This article proposes a novel Adaptive Fractional Order PID (A-FOPID) compensator with self-adjusting fractional orders to extract maximum power from a stand-alone PV system as ambient conditions change. The reference voltage is generated using a feed-forward neural network. The conventional FOPID compensator, which operates on the output voltage error of the interleaved buck-boost converter, is employed as the baseline maximum-power-point-tracking (MPPT) controller. The baseline controller is retrofitted with an online state-error-driven adaptation law that dynamically modifies the fractional orders of the controller’s integral and differential operators. The adaptation law is formulated as a nonlinear hyperbolic scaling function of the system’s state error and error-derivative variables. This augmentation supplements the controller’s adaptability, enabling it to manipulate flexibly the tightness of the applied control effort as the operating conditions change. The efficacy of the proposed control law is analyzed by carrying out customized simulations in the MATLAB Simulink environment. The simulation results show that the proposed MPPT control scheme yields a mean improvement of 25.4% in tracking accuracy and 11.3% in transient response speed under varying environmental conditions

A low power low noise high accuracy sensor IC

I investigated the design and implementation of low power low noise and high accuracy sensor IC for recording neural activity and studying sleep and other behavior in small animals. The sensor IC can acquire 16 electrophysiology signals in mice. It consists of 16 amplifier channels, a digital control circuit and a 16-bit 500 KSps charge redistribution self-calibrating successive approximation analog-to-digital converter (ADC). Each channel includes programmable gains from 12 to 250, a 7K Hz low-pass 2nd-order Butterworth filter and a track and hold. The integrated noise from 1 Hz to 7K Hz is 2.5 μV for 0 V DC offset input, 3.76 μV for 0.3 V DC offset input and 5.3 μV for –0.3 V DC offset input. The power supply rejection ratios (PSRR) for VDD and VSS are 61 db and 51 db at 1K Hz. The +/-0.3 V DC input offset of each channel is cancelled with two 5-bit DACs controlling the positive input node of the 2nd gain stage and 3rd gain stage op-amps. Total power dissipation is 1.2 mW for each amplifier channel with a +/- 1.5 V power supply. The 16-bit 500 KSps ADC has an input range of 2 V, a resolution of 16 bits, 6.2 mW power consumption and operates with +/- 1.5 V power supplies. Simulations show a signal-to-noise ratio of 90 dB for an effective accuracy of 15 bits in v TSMC’s 0.25μ CMOS process. A novel interleaving architecture and an improved comparator design contribute to reducing the power while maintaining the accuracy and speed. The ADC is intended to digitize the amplified neurophysiological signals from the companion 16-amplifier-channel IC. The amplifier channel IC die area is 19 mm2 and the ADC die area is 7 mm2 in TSMC’s 0.25μ CMOS process

An efficient phonation-driven control system using laryngeal bioimpedance and machine learning

The extraction and conversion of human voice information are crucial in several applications across multiple subject areas such as medicine, music technology and human-computer interaction. The presented research employs the variation of laryngeal bioimpedance, measured during phonation, for extracting and processing voice information. Compared to sound recordings and microphones, bioimpedance readings deliver a much simpler signal, allowing fast and computationally non-taxing processing. In the first stage of this research, a novel system for measuring laryngeal bioimpedance was designed and built. The circuit design was implemented with a multiplexed sensor system based on multiple electrode pairs to allow self-calibration of the sensors and increase usability and applicability. In the following stage, the resulting device was used to generate a novel dataset of laryngeal bioimpedance measurements for the distinction of speech and singing. This was then used in the training and deployment of an Artificial Neural Network using the Mel Frequency Cepstrum Coefficients of the recorded bioimpedance measurements. A real-time system for converting voice into digital control messages was developed and presented as the third stage of this research. The system was implemented using the MIDI protocol for using voice to control hardware and software electronic instruments. The thesis then concludes with the integration of the complete system. The conducted research results in a self-calibrating device for the measurement of laryngeal bioimpedance which delivers an fast and efficacious real-time voice-to-MIDI conversion. In addition, the creation of a unique dataset for the distinction of singing and speech allowed the deployment of real-time classification system. Collectively, the proposed system improves applicability and usability of laryngeal bioimpedance and expands the existing knowledge in the distinction of speech and singing