Communication synthesis of networks-on-chip (NoC)

The emergence of networks-on-chip (NoC) as the communication infrastructure solution for complex multi-core SoCs presents communication synthesis challenges. This dissertation addresses the design and run-time management aspects of communication synthesis. Design reuse and the infeasibility of Intellectual Property (IP) core interface redesign, requires the development of a Core-Network Interface (CNI) which allows them to communicate over the on-chip network. The absence of intelligence amongst the NoC components, entails the introduction of a CNI capable of not only providing basic packetization and depacketization, but also other essential services such as reliability, power management, reconguration and test support. A generic CNI architecture providing these services for NoCs is proposed and evaluated in this dissertation. Rising on-chip communication power costs and reliability concerns due to these, motivate the development of a peak power management technique that is both scalable to dierent NoCs and adaptable to varying trac congurations. A scalable and adaptable peak power management technique - SAPP - is proposed and demonstrated. Latency and throughput improvements observed with SAPP demonstrate its superiority over existing techniques. Increasing design complexity make prediction of design lifetimes dicult. Post SoC deployment, an on-line health monitoring scheme, is essential to maintain con- dence in the correct operation of on-chip cores. The rising design complexity and IP core test costs makes non-concurrent testing of the IP cores infeasible. An on-line scheme capable of managing IP core test in the presence of executing applications is essential. Such a scheme ensures application performance and system power budgets are eciently managed. This dissertation proposes Concurrent On-Line Test (COLT) for NoC-based systems and demonstrates how a robust implementation of COLT using a Test Infrastructure-IP (TI-IP) can be used to maintain condence in the correct operation of the SoC

Concurrent Online Testing for Many Core Systems-on-Chips

Shrinking transistor sizes have introduced new challenges and opportunities for system-on-chip (SoC) design and reliability. Smaller transistors are more susceptible to early lifetime failure and electronic wear-out, greatly reducing their reliable lifetimes. However, smaller transistors will also allow SoC to contain hundreds of processing cores and other infrastructure components with the potential for increased reliability through massive structural redundancy. Concurrent online testing (COLT) can provide sufficient reliability and availability to systems with this redundancy. COLT manages the process of testing a subset of processing cores while the rest of the system remains operational. This can be considered a temporary, graceful degradation of system performance that increases reliability while maintaining availability. In this dissertation, techniques to assist COLT are proposed and analyzed. The techniques described in this dissertation focus on two major aspects of COLT feasibility: recovery time and test delivery costs. To reduce the time between failure and recovery, and thereby increase system availability, an anomaly-based test triggering unit (ATTU) is proposed to initiate COLT when anomalous network behavior is detected. Previous COLT techniques have relied on initiating tests periodically. However, determining the testing period is based on a device's mean time between failures (MTBF), and calculating MTBF is exceedingly difficult and imprecise. To address the test delivery costs associated with COLT, a distributed test vector storage (DTVS) technique is proposed to eliminate the dependency of test delivery costs on core location. Previous COLT techniques have relied on a single location to store test vectors, and it has been demonstrated that centralized storage of tests scales poorly as the number of cores per SoC grows. Assuming that the SoC organizes its processing cores with a regular topology, DTVS uses an interleaving technique to optimally distribute the test vectors across the entire chip. DTVS is analyzed both empirically and analytically, and a testing protocol using DTVS is described. COLT is only feasible if the applications running concurrently are largely unaffected. The effect of COLT on application execution time is also measured in this dissertation, and an application-aware COLT protocol is proposed and analyzed. Application interference is greatly reduced through this technique

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

Improving System Reliability for Cyber-Physical Systems

Cyber-physical systems (CPS) are systems featuring a tight combination of, and coordination between, the system's computational and physical elements. Cyber-physical systems include systems ranging from critical infrastructure such as a power grid and transportation system to health and biomedical devices. System reliability, i.e., the ability of a system to perform its intended function under a given set of environmental and operational conditions for a given period of time, is a fundamental requirement of cyber-physical systems. An unreliable system often leads to disruption of service, financial cost and even loss of human life. An important and prevalent type of cyber-physical system meets the following criteria: processing large amounts of data; employing software as a system component; running online continuously; having operator-in-the-loop because of human judgment and an accountability requirement for safety critical systems. This thesis aims to improve system reliability for this type of cyber-physical system. To improve system reliability for this type of cyber-physical system, I present a system evaluation approach entitled automated online evaluation (AOE), which is a data-centric runtime monitoring and reliability evaluation approach that works in parallel with the cyber-physical system to conduct automated evaluation along the workflow of the system continuously using computational intelligence and self-tuning techniques and provide operator-in-the-loop feedback on reliability improvement. For example, abnormal input and output data at or between the multiple stages of the system can be detected and flagged through data quality analysis. As a result, alerts can be sent to the operator-in-the-loop. The operator can then take actions and make changes to the system based on the alerts in order to achieve minimal system downtime and increased system reliability. One technique used by the approach is data quality analysis using computational intelligence, which applies computational intelligence in evaluating data quality in an automated and efficient way in order to make sure the running system perform reliably as expected. Another technique used by the approach is self-tuning which automatically self-manages and self-configures the evaluation system to ensure that it adapts itself based on the changes in the system and feedback from the operator. To implement the proposed approach, I further present a system architecture called autonomic reliability improvement system (ARIS). This thesis investigates three hypotheses. First, I claim that the automated online evaluation empowered by data quality analysis using computational intelligence can effectively improve system reliability for cyber-physical systems in the domain of interest as indicated above. In order to prove this hypothesis, a prototype system needs to be developed and deployed in various cyber-physical systems while certain reliability metrics are required to measure the system reliability improvement quantitatively. Second, I claim that the self-tuning can effectively self-manage and self-configure the evaluation system based on the changes in the system and feedback from the operator-in-the-loop to improve system reliability. Third, I claim that the approach is efficient. It should not have a large impact on the overall system performance and introduce only minimal extra overhead to the cyberphysical system. Some performance metrics should be used to measure the efficiency and added overhead quantitatively. Additionally, in order to conduct efficient and cost-effective automated online evaluation for data-intensive CPS, which requires large volumes of data and devotes much of its processing time to I/O and data manipulation, this thesis presents COBRA, a cloud-based reliability assurance framework. COBRA provides automated multi-stage runtime reliability evaluation along the CPS workflow using data relocation services, a cloud data store, data quality analysis and process scheduling with self-tuning to achieve scalability, elasticity and efficiency. Finally, in order to provide a generic way to compare and benchmark system reliability for CPS and to extend the approach described above, this thesis presents FARE, a reliability benchmark framework that employs a CPS reliability model, a set of methods and metrics on evaluation environment selection, failure analysis, and reliability estimation. The main contributions of this thesis include validation of the above hypotheses and empirical studies of ARIS automated online evaluation system, COBRA cloud-based reliability assurance framework for data-intensive CPS, and FARE framework for benchmarking reliability of cyber-physical systems. This work has advanced the state of the art in the CPS reliability research, expanded the body of knowledge in this field, and provided some useful studies for further research

Near-Memory Address Translation

Virtual memory (VM) is a crucial abstraction in modern computer systems at any scale, from handheld devices to datacenters. VM provides programmers the illusion of an always sufficiently large and linear memory, making programming easier. Although the core components of VM have remained largely unchanged since early VM designs, the design constraints and usage patterns of VM have radically shifted from when it was invented. Today, computer systems integrate hundreds of gigabytes to a few terabytes of memory, while tightly integrated heterogeneous computing platforms (e.g., CPUs, GPUs, FPGAs) are becoming increasingly ubiquitous. As there is a clear trend towards extending the CPU's VM to all computing elements in the system for an efficient and easy to use programming model, the continuous demand for faster memory accesses calls for fast translations to terabytes of memory for any computing element in the system. Unfortunately, conventional translation mechanisms fall short of providing fast translations as contemporary memories exceed the reach of today's translation caches, such as TLBs. In this thesis, we provide fundamental insights into the reason why address translation sits on the critical path of accessing memory. We observe that the traditional fully associative flexibility to map any virtual page to any page frame precludes accessing memory before translating. We study the associativity in VM across a variety of scenarios by classifying page faults using the 3C model developed for caches. Our study demonstrates that the full associativity of VM is unnecessary, and only modest associativity is required. We conclude that capacity and compulsory misses---which are unaffected by associativity---dominate, while conflict misses rapidly disappear as the associativity of VM increases. Building on the modest associativity requirements, we propose a distributed memory management unit close to where the data resides to reduce or eliminate the TLB miss penalty