A routing protocol for multisink wireless sensor networks in underground coalmine tunnels

Traditional underground coalmine monitoring systems are mainly based on the use of wired transmission. However, when cables are damaged during an accident, it is difficult to obtain relevant data on environmental parameters and the emergency situation underground. To address this problem, the use of wireless sensor networks (WSNs) has been proposed. However, the shape of coalmine tunnels is not conducive to the deployment of WSNs as they are long and narrow. Therefore, issues with the network arise, such as extremely large energy consumption, very weak connectivity, long time delays, and a short lifetime. To solve these problems, in this study, a new routing protocol algorithm for multisink WSNs based on transmission power control is proposed. First, a transmission power control algorithm is used to negotiate the optimal communication radius and transmission power of each sink. Second, the non-uniform clustering idea is adopted to optimize the cluster head selection. Simulation results are subsequently compared to the Centroid of the Nodes in a Partition (CNP) strategy and show that the new algorithm delivers a good performance: Power efficiency is increased by approximately 70%, connectivity is increased by approximately 15%, the cluster interference is diminished by approximately 50%, the network lifetime is increased by approximately 6%, and the delay is reduced with an increase in the number of sinks

Wireless multimedia sensor networks, security and key management

Wireless Multimedia Sensor Networks (WMSNs) have emerged and shifted the focus from the typical scalar wireless sensor networks to networks with multimedia devices that are capable to retrieve video, audio, images, as well as scalar sensor data. WMSNs are able to deliver multimedia content due to the availability of inexpensive CMOS cameras and microphones coupled with the significant progress in distributed signal processing and multimedia source coding techniques. These mentioned characteristics, challenges, and requirements of designing WMSNs open many research issues and future research directions to develop protocols, algorithms, architectures, devices, and testbeds to maximize the network lifetime while satisfying the quality of service requirements of the various applications. In this thesis dissertation, we outline the design challenges of WMSNs and we give a comprehensive discussion of the proposed architectures and protocols for the different layers of the communication protocol stack for WMSNs along with their open research issues. Also, we conduct a comparison among the existing WMSN hardware and testbeds based on their specifications and features along with complete classification based on their functionalities and capabilities. In addition, we introduce our complete classification for content security and contextual privacy in WSNs. Our focus in this field, after conducting a complete survey in WMSNs and event privacy in sensor networks, and earning the necessary knowledge of programming sensor motes such as Micaz and Stargate and running simulation using NS2, is to design suitable protocols meet the challenging requirements of WMSNs targeting especially the routing and MAC layers, secure the wirelessly exchange of data against external attacks using proper security algorithms: key management and secure routing, defend the network from internal attacks by using a light-weight intrusion detection technique, protect the contextual information from being leaked to unauthorized parties by adapting an event unobservability scheme, and evaluate the performance efficiency and energy consumption of employing the security algorithms over WMSNs

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Design and evaluation of wireless dense networks : application to in-flight entertainment systems

Le réseau sans fil est l'un des domaines de réseautage les plus prometteurs avec des caractéristiques uniques qui peuvent fournir la connectivité dans les situations où il est difficile d'utiliser un réseau filaire, ou lorsque la mobilité des nœuds est nécessaire. Cependant, le milieu de travail impose généralement diverses contraintes, où les appareils sans fil font face à différents défis lors du partage des moyens de communication. De plus, le problème s'aggrave avec l'augmentation du nombre de nœuds. Différentes solutions ont été introduites pour faire face aux réseaux très denses. D'autre part, un nœud avec une densité très faible peut créer un problème de connectivité et peut conduire à l'optension de nœuds isolés et non connectes au réseau. La densité d'un réseau est définit en fonction du nombre de nœuds voisins directs au sein de la portée de transmission du nœud. Cependant, nous croyons que ces métriques ne sont pas suffisants et nous proposons une nouvelle mesure qui considère le nombre de voisins directs et la performance du réseau. Ainsi, la réponse du réseau, respectant l'augmentation du nombre de nœuds, est considérée lors du choix du niveau de la densité. Nous avons défini deux termes: l'auto-organisation et l'auto-configuration, qui sont généralement utilisés de façon interchangeable dans la littérature en mettant en relief la différence entre eux. Nous estimons qu'une définition claire de la terminologie peut éliminer beaucoup d'ambiguïté et aider à présenter les concepts de recherche plus clairement. Certaines applications, telles que Ies systèmes "In-Flight Entertainment (IFE)" qui se trouvent à l'intérieur des cabines d'avions, peuveut être considérées comme des systèmes sans fil de haute densité, même si peu de nœuds sont relativement présents. Pour résoudre ce problème, nous proposons une architecture hétérogène de différentes technologies à fin de surmonter les contraintes spécifiques de l'intérieur de la cabine. Chaque technologie vise à résoudre une partie du problème. Nous avons réalisé diverses expérimentations et simulations pour montrer la faisabilité de l'architecture proposée. Nous avons introduit un nouveau protocole d'auto-organisation qui utilise des antennes intelligentes pour aider certains composants du système IFE; à savoir les unités d'affichage et leurs systèmes de commande, à s'identifier les uns les autres sans aucune configuration préliminaire. Le protocole a été conçu et vérifié en utilisant le langage UML, puis, un module de NS2 a été créé pour tester les différents scénarios.Wireless networking is one of the most challenging networking domains with unique features that can provide connectivity in situations where it is difficult to use wired networking, or when ! node mobility is required. However, the working environment us! ually im poses various constrains, where wireless devices face various challenges when sharing the communication media. Furthermore, the problem becomes worse when the number of nodes increase. Different solutions were introduced to cope with highly dense networks. On the other hand, a very low density can create a poor connectivity problem and may lead to have isolated nodes with no connection to the network. It is common to define network density according to the number of direct neighboring nodes within the node transmission range. However, we believe that such metric is not enough. Thus, we propose a new metric that encompasses the number of direct neighbors and the network performance. In this way, the network response, due to the increasing number of nodes, is considered when deciding the density level. Moreover, we defined two terms, self-organization and self-configuration, which are usually used interchangeably in the literature through highlighting the difference ! between them. We believe that having a clear definition for terminology can eliminate a lot of ambiguity and help to present the research concepts more clearly. Some applications, such as In-Flight Entertainment (IFE) systems inside the aircraft cabin, can be considered as wirelessly high dense even if relatively few nodes are present. To solve this problem, we propose a heterogeneous architecture of different technologies to overcome the inherited constrains inside the cabin. Each technology aims at solving a part of the problem. We held various experimentation and simulations to show the feasibility of the proposed architecture

Methods for Interference Management in Medical Wireless Sensor Networks

Emerging Medical Body Area Networks (MBANs) require new, protected spectrum for clinical applications. This may mean uncoordinated and autonomous operation of multiple MBANs, within the new candidate bands. The question is that how will MBANs coexist as a secondary service with other radio systems? Clinical environment requires balance of robust and efficient wireless techniques to enable coexistence of MBANs and other radio devices where low transmission power MBANs as secondary systems may be vulnerable to interference from incumbent devices transceivers. Physical separation between the MBANs and incumbent radio devices and avoiding the transmission in the same frequency bands among the wireless techniques may be considered. In this paper, we propose interferencemanagement techniques considering such coexistencebetween the MBANs and other radio systems and deal withthe issue of co-existence with primary systems by proposing novel methods for a gateway-to-gateway coordination, to assist the methods described in the first and second part of this paper. Result is improved reliability and Quality of Service for MBANs. These would lead to multiple clinical benefits, including better patient mobility, more monitoring flexibility and extension of monitoring into care areas that are currently unmonitored. Reduced clinical errors and reduced overall monitoring costs are other results

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Adaptive search in mobile peer-to-peer databases

Information is stored in a plurality of mobile peers. The peers communicate in a peer to peer fashion, using a short-range wireless network. Occasionally, a peer initiates a search for information in the peer to peer network by issuing a query. Queries and pieces of information, called reports, are transmitted among peers that are within a transmission range. For each search additional peers are utilized, wherein these additional peers search and relay information on behalf of the originator of the search

Wireless sensor networks using network coding for structural health monitoring

Wireless Sensor Networks (WSNs) have been deployed for the purpose of structural health monitoring (SHM) of civil engineering structures, e.g. bridges. SHM applications can potentially produce a high volume of sensing data, which consumes much transmission power and thus decreases the lifetime of the battery-run networks. We employ the network coding technique to improve the network efficiency and prolong its lifetime. By increasing the transmission power, we change the node connectivity and control the number of nodes that can overhear transmitted messages so as to hopefully realize the capacity gain by use of network coding. In Chapter 1, we present the background, to enable the reader to understand the need for SHM, advantages and drawbacks of WSNs and potential the application of network coding techniques has. In Chapter 2 we provide a review of related research explaining how it relates to our work, and why it is not fully applicable in our case. In Chapter 3, we propose to control transmission power as a means to adjust the number of nodes that can overhear a message transmission by a neighbouring node. However, too much of the overhearing by high power transmission consumes aggressively limited battery energy. We investigate the interplay between transmission power and network coding operations in Chapter 4. We show that our solution reduces the overall volume of data transfer, thus leading to significant energy savings and prolonged network lifetime. We present the mathematical analysis of our proposed algorithm. By simulation, we also study the trade-offs between overhearing and power consumption for the network coding scheme. In Chapter 5, we propose a methodology for the optimal placement of sensor nodes in linear network topologies (e.g., along the length of a bridge), that aims to minimise the link connectivity problems and maximise the lifetime of the network. Both simple packet relay and network coding are considered for the routing of the collected data packets towards two sink nodes positioned at both ends of the bridge. Our mathematical analysis, verified by simulation results, shows that the proposed methodology can lead to significant energy saving and prolong the lifetime of the underlying wireless sensor network. Chapter 6 is dedicated to the delay analysis. We analytically calculate the gains in terms of packet delay obtained by the use of network coding in linear multi-hop wireless sensor network topologies. Moreover, we calculate the exact packet delay (from the packet generation time to the time it is delivered to the sink nodes) as a function of the location of the source sensor node within the linear network. The derived packet delay distribution formulas have been verified by simulations and can provide a benchmark for the delay performance of linear sensor networks. In the Chapter 7, we propose an adaptive version of network coding based algorithm. In the case of packet loss, nodes do not necessary retransmit messages as they are able to internally decide how to cope with the situation. The goal of this algorithm is to reduce the power consumption, and decrease delays whenever it can. This algorithm achieves the delay similar to that of three-hop direct-connectivity version of the deterministic algorithm, and consumes power almost like one-hop direct-connectivity version of deterministic algorithm. In very poor channel conditions, this protocol outperforms the deterministic algorithm both in terms of delay and power consumption. In Chapter 8, we explain the direction of our future work. Particularly, we are interested in the application of combined TDMA/FDMA technique to our algorithm.Open Acces

Journal of Telecommunications and Information Technology, 2018, nr 1

kwartalni