INTELLIGENTE TRANSPORT SYSTEMEN ITS EN VERKEERSVEILIGHEID

This report discusses Intelligent Transport Systems (ITS). This generic term is used for a broad range of information-, control- and electronic technology that can be integrated in the road infrastructure and the vehicles themselves, saving lives, time and money bymonitoring and managing traffic flows, reducing conges-tion, avoiding accidents, etc. Because this report was written in the scope of the Policy Research Centre Mobility & Public Works, track Traffic Safety, it focuses on ITS systems from the traffic safety point of view. Within the whole range of ITS systems, two categories can be distinguished: autonomous and cooperative systems. Autonomous systems are all forms of ITS which operate by itself, and do not depend on the cooperation with other vehicles or supporting infrastructure. Example applications are blind spot detection using radar, electronic stability control, dynamic traffic management using variable road signs, emergency call, etc. Cooperative systems are ITS systems based on communication and cooperation, both between vehicles as between vehicles and infrastructure. Example applications are alerting vehicles approaching a traffic jam, exchanging data regarding hazardous road conditions, extended electronic brake light, etc. In some cases, autonomous systems can evolve to autonomous cooperative systems. ISA (Intelligent Speed Adaptation) is an example of this: the dynamic aspect as well as communication with infrastructure (eg Traffic lights, Variable Message Sign (VMS)...) can provide additional road safety. This is the clear link between the two parts of this report. The many ITS applications are an indicator of the high expectations from the government, the academic world and the industry regarding the possibilities made possible by both categories of ITS systems. Therefore, the comprehensive discussion of both of them is the core of this report. The first part of the report covering the autonomous systems treats two aspects: 1. Overview of European projects related to mobility and in particular to road safety 2. Overview for guidelines for the evaluation of ITS projects. Out of the wide range of diverse (autonomous) ITS applications a selection is made; this selection is focused on E Safety Forum and PreVENT. Especially the PreVent research project is interesting because ITS-applications have led to a number of concrete demonstration vehicles that showed - in protected and unprotected surroundings- that these ITS-applications are already technically useful or could be developed into useful products. The component “guidelines for the evaluation of ITS projects” outlines that the government has to have specific evaluation tools if the government has the ambition of using ITS-applications for road safety. Two projects -guidelines for the evaluation of ITS projects- are examined; a third evaluation method is only mentioned because this description shows that a specific targeting of the government can be desirable : 1. TRACE describes the guidelines for the evaluation of ITS projects which are useful for the evaluation of specific ITS-applications. 2. FITS contains Finnish guidelines for the evaluation of ITS project; FIS is an adaptation of methods used for evaluation of transport projects. 3. The third evaluation method for the evaluation of ITS projects is developed in an ongoing European research project, eImpact. eImpact is important because, a specific consultation of stake holders shows that the social importance of some techniques is underestimated. These preliminary results show that an appropriate guiding role for the government could be important. In the second part of this document the cooperative systems are discussed in depth. These systems enable a large number of applications with an important social relevance, both on the level of the environment, mobility and traffic safety. Cooperative systems make it possible to warn drivers in time to avoid collisions (e.g. when approaching the tail of a traffic jam, or when a ghost driver is detected). Hazardous road conditions can be automatically communicated to other drivers (e.g. after the detection of black ice or an oil trail by the ESP). Navigation systems can receive detailed real-time up-dates about the current traffic situation and can take this into account when calculating their routes. When a traffic distortion occurs, traffic centers can immediately take action and can actively influence the way that the traffic will be diverted. Drivers can be notified well in advance about approaching emergency vehicles, and can be directed to yield way in a uniform manner. This is just a small selection from the large number of applications that are made possible because of cooperative ITS systems, but it is very obvious that these systems can make a significant positive contribution to traffic safety. In literature it is estimated that the decrease of accidents with injuries of fatalities will be between 20% and 50% . It is not suprising that ITS systems receive a lot of attention for the moment. On an international level, a number of standards are being established regarding this topic. The International Telecommunications Uniont (ITU), Institute for Electrical and Electronics Engineers (IEEE), International Organization for Standardization (ISO), Association of Radio Industries and Business (ARIB) and European committee for standardization (CEN) are currently defining standards that describe different aspects of ITS systems. One of the names that is mostly mentioned in literature is the ISO TC204/WG16 Communications Architecture for Land Mobile environment (CALM) standard. It describes a framework that enables transparent (both for the application and the user) continuous communication through different communication media. Besides the innumerable standardization activities, there is a great number of active research projects. On European level, the most important are the i2010 Intelligent Car Initiative, the eSafety Forum, and the COMeSafety, the CVIS, the SAFESPOT, the COOPERS and the SEVECOM project. The i2010 Intelligent Car Initiative is an European initiative with the goal to halve the number of traffic casualties by 2010. The eSafety Forum is an initiative of the European Commission, industry and other stakeholders and targets the acceleration of development and deployment of safety-related ITS systems. The COMeSafety project supports the eSafety Forum on the field of vehicle-to-vehicle and vehicle-to-infrastructure communication. In the CVIS project, attention is given to both technical and non-technical issues, with the main goal to develop the first free and open reference implementation of the CALM architecture. The SAFEST project investigates which data is important for safety applications, and with which algorithmsthis data can be extracted from vehicles and infrastructure. The COOPERS project mainly targets communication between vehicles and dedicated roadside infrastructure. Finally, the SEVECOM project researches security and privacy issues. Besides the European projects, research is also conducted in the United States of America (CICAS and VII projects) and in Japan (AHSRA, VICS, Smartway, internetITS). Besides standardization bodies and governmental organizations, also the industry has a considerable interest in ITS systems. In the scope of their ITS activities, a number of companies are united in national and international organizations. On an international level, the best known names are the Car 2 Car Communication Consortium, and Ertico. The C2C CC unites the large European car manufacturers, and focuses on the development of an open standard for vehicle-to-vehicle and vehicle-to-infrastructure communications based on the already well established IEEE 802.11 WLAN standard. Ertico is an European multi-sector, public/private partnership with the intended purpose of the development and introduction of ITS systems. On a national level, FlandersDrive and The Telematics Cluster / ITS Belgium are the best known organizations. Despite the worldwide activities regarding (cooperative) ITS systems, there still is no consensus about the wireless technology to be used in such systems. This can be put down to the fact that a large number of suitable technologies exist or are under development. Each technology has its specific advantages and disadvantages, but no single technology is the ideal solution for every ITS application. However, the different candidates can be classified in three distinct categories. The first group contains solutions for Dedicated Short Range Communication (DSRC), such as the WAVE technology. The second group is made up of several cellular communication networks providing coverage over wide areas. Examples are GPRS (data communication using the GSM network), UMTS (faster then GPRS), WiMAX (even faster then UMTS) and MBWA (similar to WiMAX). The third group consists of digital data broadcast technologies such as RDS (via the current FM radio transmissions, slow), DAB and DMB (via current digital radio transmissions, quicker) and DVB-H (via future digital television transmissions for mobiledevices, quickest). The previous makes it clear that ITS systems are a hot topic right now, and they receive a lot of attention from the academic world, the standardization bodies and the industry. Therefore, it seems like that it is just a matter of time before ITS systems will find their way into the daily live. Due to the large number of suitable technologies for the implementation of cooperative ITS systems, it is very hard to define which role the government has to play in these developments, and which are the next steps to take. These issues were addressed in reports produced by the i2010 Intelligent Car Initiative and the CVIS project. Their state of the art overview revealed that until now, no country has successfully deployed a fully operational ITS system yet. Seven EU countries are the furthest and are already in the deployment phase: Sweden, Germany, the Netherlands, the United Kingdom, Finland, Spain and France. These countries are trailed by eight countries which are in the promotion phase: Denmark, Greece, Italy, Austria, Belgium,Norway, the Czech Republic and Poland. Finally, the last ten countries find themselves in the start-up phase: Estonia, Lithuania, Latvia, Slovenia, Slovakia, Hungary, Portugal, Switzerland, Ireland and Luxembourg. These European reports produced by the i2010 Intelligent Car Initiative and the CVIS project have defined a few policy recommendations which are very relevant for the Belgian and Flemish government. The most important recommendations for the Flemish government are: • Support awareness: research revealed that civilians consider ITS applications useful, but they are not really willing to pay for this technology. Therefore, it is important to convince the general public of the usefulness and the importance of ITS systems. • Fill the gaps: Belgium is situated in the promotion phase. This means that it should focus at identifying the missing stakeholders, and coordinating national and regional ITS activities. Here it is important that the research activities are coordinated in a national and international context to allow transfer of knowledge from one study to the next, as well as the results to be comparable. • Develop a vision: in the scope of ITS systems policies have to be defined regarding a large number of issues. For instance there is the question if ITS users should be educated, meaning that the use of ITS systems should be the subject of the drivers license exam. How will the regulations be for the technical inspection of vehicles equipped with ITS technology? Will ITS systems be deployed on a voluntary base, or will they e.g. be obliged in every new car? Will the services be offered by private companies, by the public authorities, or by a combination of them? Which technology will be used to implement ITS systems? These are just a few of the many questions where the government will have to develop a point of view for. • Policy coordination: ITS systems are a policy subject on an international, national and regional level. It is very important that these policy organizations can collaborate in a coordinated manner. • Iterative approach to policy development: developing policies for this complex matter is not a simple task. This asks for an iterative approach, where policy decisions are continuously refined and adjusted

Next-Generation Pedal: Integration of Sensors in a Braking Pedal for a Full Brake-by-Wire System

This article presents a novel approach to designing and validating a fully electronic braking pedal, addressing the growing integration of electronics in vehicles. With the imminent rise of brake-by-wire (BBW) technology, the brake pedal requires electronification to keep pace with industry advancements. This research explores technologies and features for the next-generation pedal, including low-power consumption electronics, cost-effective sensors, active adjustable pedals, and a retractable pedal for autonomous vehicles. Furthermore, this research brings the benefits of the water injection technique (WIT) as the base for manufacturing plastic pedal brakes towards reducing cost and weight while enhancing torsional stiffness. Communication with original equipment manufacturers (OEMs) has provided valuable insights and feedback, facilitating a productive exchange of ideas. The findings include two sensor prototypes utilizing inductive technology and printed-ink gauges. Significantly, reduced power consumption was achieved in a Hall-effect sensor already in production. Additionally, a functional BBW prototype was developed and validated. This research presents an innovative approach to pedal design that aligns with current electrification trends and autonomous vehicles. It positions the braking pedal as an advanced component that has the potential to redefine industry standards. In summary, this research significantly contributes to the electronic braking pedal technology presenting the critical industry needs that have driven technical studies and progress in the field of sensors, electronics, and materials, highlighting the challenges that component manufacturers will inevitably face in the forthcoming years.This work has been partially supported by the grant “Ayudas para el desarrollo de proyectos de I+D mediante la contratación de personas doctoradas y la realización de doctorados industriales, programa BIKAINTEK 2019” by the Department of Economic Development, Sustainability, and Environment of the Basque Government. Additionally, this work has been partially supported by the Government of Spain, through the Center for the Development of Industrial Technology (CDTI) under grant agreement IDI-20200198 and by Eusko Jaularitza-Gobierno Vasco (SOC4CRIS KK-2023/00015)

Assessment of the energy efficiency estimation methods on induction motors considering real-time monitoring

Different methods have been developed to estimate the energy efficiency of induction motors. The accuracy of these methods vary with the load factor, the unbalanced voltage (UV) and harmonics. The feasibility of these methods for efficiency estimation in real-time were theoretically and experimentally assessed during the operation under different operational conditions (i.e. balanced sinusoidal voltage (BSV), harmonics, UV and harmonics with UV). Results show that for load factors over 80%, the air-gap method is applicable under any condition, while the slip method is only applicable under BSV or balanced harmonic voltage. Moreover, for load factors over 40%, the nameplate method is applicable under BSV. Other methods result in errors over 8% and optimization methods are not applicable for real-time monitoring. Electric systems generally operates with some degree of UV and harmonics, while induction motors mostly operate with load factors below 60%, limiting the use of these methods for real-time measurement

Internet of Things (IoT) and the Energy Sector

Integration of renewable energy and optimization of energy use are key enablers of sustainable energy transitions and mitigating climate change. Modern technologies such the Internet of Things (IoT) offer a wide number of applications in the energy sector, i.e, in energy supply, transmission and distribution, and demand. IoT can be employed for improving energy efficiency, increasing the share of renewable energy, and reducing environmental impacts of the energy use. This paper reviews the existing literature on the application of IoT in in energy systems, in general, and in the context of smart grids particularly. Furthermore, we discuss enabling technologies of IoT, including cloud computing and different platforms for data analysis. Furthermore, we review challenges of deploying IoT in the energy sector, including privacy and security, with some solutions to these challenges such as blockchain technology. This survey provides energy policy-makers, energy economists, and managers with an overview of the role of IoT in optimization of energy systems.Peer reviewe

Internet of Things (IoT) and the Energy Sector

Integration of renewable energy and optimization of energy use are key enablers of sustainable energy transitions and mitigating climate change. Modern technologies such the Internet of Things (IoT) offer a wide number of applications in the energy sector, i.e, in energy supply, transmission and distribution, and demand. IoT can be employed for improving energy efficiency, increasing the share of renewable energy, and reducing environmental impacts of the energy use. This paper reviews the existing literature on the application of IoT in in energy systems, in general, and in the context of smart grids particularly. Furthermore, we discuss enabling technologies of IoT, including cloud computing and different platforms for data analysis. Furthermore, we review challenges of deploying IoT in the energy sector, including privacy and security, with some solutions to these challenges such as blockchain technology. This survey provides energy policy-makers, energy economists, and managers with an overview of the role of IoT in optimization of energy systems.Peer reviewe

Advanced Control and Estimation Concepts, and New Hardware Topologies for Future Mobility

According to the National Research Council, the use of embedded systems throughout society could well overtake previous milestones in the information revolution. Mechatronics is the synergistic combination of electronic, mechanical engineering, controls, software and systems engineering in the design of processes and products. Mechatronic systems put “intelligence” into physical systems. Embedded sensors/actuators/processors are integral parts of mechatronic systems. The implementation of mechatronic systems is consistently on the rise. However, manufacturers are working hard to reduce the implementation cost of these systems while trying avoid compromising product quality. One way of addressing these conflicting objectives is through new automatic control methods, virtual sensing/estimation, and new innovative hardware topologies

Alternative vehicle electronic architecture for individual wheel control

Electronic control systems have become an integral part of the modern vehicle and their installation rate is still on a sharp rise. Their application areas range from powertrain, chassis and body control to entertainment. Each system is conventionally control led by a centralised controller with hard-wired links to sensors and actuators. As systems have become more complex, a rise in the number of system components and amount of wiring harness has followed. This leads to serious problems on safety, reliability and space limitation. Different networking and vehicle electronic architectures have been developed by others to ease these problems. The thesis proposes an alternative architecture namely Distributed Wheel Architecture, for its potential benefits in terms of vehicle dynamics, safety and ease of functional addition. The architecture would have a networked controller on each wheel to perform its dynamic control including braking, suspension and steering. The project involves conducting a preliminary study and comparing the proposed architecture with four alternative existing or high potential architectures. The areas of study are functionality, complexity, and reliability. Existing ABS, active suspension and four wheel steering systems are evaluated in this work by simulation of their operations using road test data. They are used as exemplary systems, for modelling of the new electronic architecture together with the four alternatives. A prediction technique is developed, based on the derivation of software pseudo code from system specifications, to estimate the microcontroller specifications of all the system ECUs. The estimate indicates the feasibility of implementing the architectures using current microcontrollers. Message transfer on the Controller Area Network (CAN) of each architecture is simulated to find its associated delays, and hence the feasibility of installing CAN in the architectures. Architecture component costs are estimated from the costs of wires, ECUs, sensors and actuators. The number of wires is obtained from the wiring models derived from exemplary system data. ECU peripheral component counts are estimated from their statistical plot against the number of ECU pins of collected ECUs. Architecture component reliability is estimated based on two established reliability handbooks. The results suggest that all of the five architectures could be implemented using present microcontrollers. In addition, critical data transfer via CAN is made within time limits under current levels of message load, indicating the possibility of installing CAN in these architectures. The proposed architecture is expected to· be costlier in terms of components than the rest of the architectures, while it is among the leaders for wiring weight saving. However, it is expected to suffer from a relatively higher probability of system component failure. The proposed architecture is found not economically viable at present, but shows potential in reducing vehicle wire and weight problems

Control and operation of a Vertical Axis Wind Turbine

Research in wind power generation technology is a topic of high relevance in the context of renewable energy systems. This project aims to develop and implement an automatic operation and control system for an experimental vertical axis wind turbine (VAWT) located at Lunds Tekniska Högskola, in Sweden. Supervisory control and data acquisition systems (SCADA) are increasingly considered indispensable in industrial scale wind power plants with the purpose of optimizing power production and monitoring the operation conditions in realtime to improve safety and reduce downtime and costs. Variable speed control is widely used for maximizing power extraction. In this project, a Maximum Power Point Tracking (MPPT) algorithm was successfully implemented in order to optimize power production. Hill Climb Search (HCS) was the chosen control method, since there is no knowledge about the optimum tip speed ratio of the rotor or the wind turbine maximum power curve. A state-machine model was developed to manage the operation of the wind turbine. The control sequence is implemented in programmable logic controllers from National Instruments, and data from the power converters and wind speed measurement is acquired and analyzed in the system. Performance tests were ran to investigate the optimum CP and the wind speed at which the wind turbine is capable of producing power