Secure Virtualization and Multicore Platforms State-of-the-Art report

SVaM

An efficient multi-core implementation of a novel HSS-structured multifrontal solver using randomized sampling

We present a sparse linear system solver that is based on a multifrontal variant of Gaussian elimination, and exploits low-rank approximation of the resulting dense frontal matrices. We use hierarchically semiseparable (HSS) matrices, which have low-rank off-diagonal blocks, to approximate the frontal matrices. For HSS matrix construction, a randomized sampling algorithm is used together with interpolative decompositions. The combination of the randomized compression with a fast ULV HSS factorization leads to a solver with lower computational complexity than the standard multifrontal method for many applications, resulting in speedups up to 7 fold for problems in our test suite. The implementation targets many-core systems by using task parallelism with dynamic runtime scheduling. Numerical experiments show performance improvements over state-of-the-art sparse direct solvers. The implementation achieves high performance and good scalability on a range of modern shared memory parallel systems, including the Intel Xeon Phi (MIC). The code is part of a software package called STRUMPACK -- STRUctured Matrices PACKage, which also has a distributed memory component for dense rank-structured matrices

Contention-aware performance monitoring counter support for real-time MPSoCs

Tasks running in MPSoCs experience contention delays when accessing MPSoC’s shared resources, complicating task timing analysis and deriving execution time bounds. Understanding the Actual Contention Delay (ACD) each task suffers due to other corunning tasks, and the particular hardware shared resources in which contention occurs, is of prominent importance to increase confidence on derived execution time bounds of tasks. And, whenever those bounds are violated, ACD provides information on the reasons for overruns. Unfortunately, existing MPSoC designs considered in real-time domains offer limited hardware support to measure tasks’ ACD losing all these potential benefits. In this paper we propose the Contention Cycle Stack (CCS), a mechanism that extends performance monitoring counters to track specific events that allow estimating the ACD that each task suffers from every contending task on every hardware shared resource. We build the CCS using a set of specialized low-overhead Performance Monitoring Counters for the Cobham Gaisler GR740 (NGMP) MPSoC – used in the space domain – for which we show CCS’s benefits.The research leading to these results has received funding from the European Space Agency under contracts 4000109680, 4000110157 and NPI 4000102880, and the Ministry of Science and Technology of Spain under contract TIN-2015-65316-P. Jaume Abella has been partially supported by the Ministry of Economy and Competitiveness under Ramon y Cajal postdoctoral fellowship number RYC-2013-14717.Peer ReviewedPostprint (author's final draft

Vector support for multicore processors with major emphasis on configurable multiprocessors

It recently became increasingly difficult to build higher speed uniprocessor chips because of performance degradation and high power consumption. The quadratically increasing circuit complexity forbade the exploration of more instruction-level parallelism (JLP). To continue raising the performance, processor designers then focused on thread-level parallelism (TLP) to realize a new architecture design paradigm. Multicore processor design is the result of this trend. It has proven quite capable in performance increase and provides new opportunities in power management and system scalability. But current multicore processors do not provide powerful vector architecture support which could yield significant speedups for array operations while maintaining arealpower efficiency. This dissertation proposes and presents the realization of an FPGA-based prototype of a multicore architecture with a shared vector unit (MCwSV). FPGA stands for Filed-Programmable Gate Array. The idea is that rather than improving only scalar or TLP performance, some hardware budget could be used to realize a vector unit to greatly speedup applications abundant in data-level parallelism (DLP). To be realistic, limited by the parallelism in the application itself and by the compiler\u27s vectorizing abilities, most of the general-purpose programs can only be partially vectorized. Thus, for efficient resource usage, one vector unit should be shared by several scalar processors. This approach could also keep the overall budget within acceptable limits. We suggest that this type of vector-unit sharing be established in future multicore chips. The design, implementation and evaluation of an MCwSV system with two scalar processors and a shared vector unit are presented for FPGA prototyping. The MicroBlaze processor, which is a commercial IP (Intellectual Property) core from Xilinx, is used as the scalar processor; in the experiments the vector unit is connected to a pair of MicroBlaze processors through standard bus interfaces. The overall system is organized in a decoupled and multi-banked structure. This organization provides substantial system scalability and better vector performance. For a given area budget, benchmarks from several areas show that the MCwSV system can provide significant performance increase as compared to a multicore system without a vector unit. However, a MCwSV system with two MicroBlazes and a shared vector unit is not always an optimized system configuration for various applications with different percentages of vectorization. On the other hand, the MCwSV framework was designed for easy scalability to potentially incorporate various numbers of scalar/vector units and various function units. Also, the flexibility inherent to FPGAs can aid the task of matching target applications. These benefits can be taken into account to create optimized MCwSV systems for various applications. So the work eventually focused on building an architecture design framework incorporating performance and resource management for application-specific MCwSV (AS-MCwSV) systems. For embedded system design, resource usage, power consumption and execution latency are three metrics to be used in design tradeoffs. The product of these metrics is used here to choose the MCwSV system with the smallest value

Power models, energy models and libraries for energy-efficient concurrent data structures and algorithms

EXCESS deliverable D2.3. More information at http://www.excess-project.eu/This deliverable reports the results of the power models, energy models and librariesfor energy-efficient concurrent data structures and algorithms as available by projectmonth 30 of Work Package 2 (WP2). It reports i) the latest results of Task 2.2-2.4 onproviding programming abstractions and libraries for developing energy-efficient datastructures and algorithms and ii) the improved results of Task 2.1 on investigating andmodeling the trade-off between energy and performance of concurrent data structuresand algorithms. The work has been conducted on two main EXCESS platforms: Intelplatforms with recent Intel multicore CPUs and Movidius Myriad platforms

Planificación consciente de la contención y gestión de recursos en arquitecturas multicore emergentes

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadores y Automática, leída el 14-12-2021Chip multicore processors (CMPs) currently constitute the architecture of choice for mosto general-pùrpose computing systems, and they will likely continue to be dominant in the near future. Advances in technology have enabled to pack an increasing number of cores and bigger caches on the same chip. Nevertheless, contention on shared resources on CMPs -present since the advent of these architectures- still poses a big challenge. Cores in a CMP typically share a last-level cache (LLC) and other memory-related resources with the remaining cores, such as a DRAM controller and an interconnection network. This causes that co-running applications may intensively compete with each other for these shared resources, leading to substantial and uneven performance degradation...Los procesadores multinúcleo o CMPs (Chip Multicore Processors) son actualmente la arquitectura más usada por la mayoría de sistemas de computación de propósito general, y muy probablemente se mantendrían en esa posición dominante en el futuro cercano. Los avances tecnológicos han permitido integrar progresivamente en el mismo chip más cores y aumentar los tamaños de los distintos niveles de cache. No obstante, la contención de recursos compartidos en CMPs {presente desde la aparición de estas arquitecturas{ todavía representa un reto importante que afrontar. Los cores en un CMP comparten en la mayor parte de los diseños una cache de último nivel o LLC (Last-Level Cache) y otros recursos, como el controlador de DRAM o una red de interconexión. La existencia de dichos recursos compartidos provoca en ocasiones que cuando se ejecutan dos o más aplicaciones simultáneamente en el sistema, se produzca una degradación sustancial y potencialmente desigual del rendimiento entre aplicaciones...Fac. de InformáticaTRUEunpu

Automatic generation of synthetic workloads for multicore systems

textWhen designing a computer system, benchmark programs are used with cycle accurate performance/power simulators and HDL level simulators to evaluate novel architectural enhancements, perform design space exploration, understand the worst-case power characteristics of various designs and find performance bottlenecks. This research effort is directed towards automatically generating synthetic benchmarks to tackle three design challenges: 1) For most of the simulation related purposes, full runs of modern real world parallel applications like the PARSEC, SPLASH suites cannot be used as they take machine weeks of time on cycle accurate and HDL level simulators incurring a prohibitively large time cost 2) The second design challenge is that, some of these real world applications are intellectual property and cannot be shared with processor vendors for design studies 3) The most significant problem in the design stage is the complexity involved in fixing the maximum power consumption of a multicore design, called the Thermal Design Power (TDP). In an effort towards fixing this maximum power consumption of a system at the most optimal point, designers are used to hand-crafting possible code snippets called power viruses. But, this process of trying to manually write such maximum power consuming code snippets is very tedious. All of these aforementioned challenges has lead to the resurrection of synthetic benchmarks in the recent past, serving as a promising solution to all the challenges. During the design stage of a multicore system, availability of a framework to automatically generate system-level synthetic benchmarks for multicore systems will greatly simplify the design process and result in more confident design decisions. The key idea behind such an adaptable benchmark synthesis framework is to identify the key characteristics of real world parallel applications that affect the performance and power consumption of a real program and create synthetic executable programs by varying the values for these characteristics. Firstly, with such a framework, one can generate miniaturized synthetic clones for large target (current and futuristic) parallel applications enabling an architect to use them with slow low-level simulation models (e.g., RTL models in VHDL/Verilog) and helps in tailoring designs to the targeted applications. These synthetic benchmark clones can be distributed to architects and designers even if the original applications are intellectual property, when they are not publicly available. Lastly, such a framework can be used to automatically create maximum power consuming code snippets to be able to help in fixing the TDP, heat sinks, cooling system and other power related features of the system. The workload cloning framework built using the proposed synthetic benchmark generation methodology is evaluated to show its superiority over the existing cloning methodologies for single-core systems by generating miniaturized clones for CPU2006 and ImplantBench workloads with only an average error of 2.9% in performance for up to five orders of magnitude of simulation speedup. The correlation coefficient predicting the sensitivity to design changes is 0.95 and 0.98 for performance and power consumption. The proposed framework is evaluated by cloning parallel applications implemented based on p-threads and OpenMP in the PARSEC benchmark suite. The average error in predicting performance is 4.87% and that of power consumption is 2.73%. The correlation coefficient predicting the sensitivity to design changes is 0.92 for performance. The efficacy of the proposed synthetic benchmark generation framework for power virus generation is evaluation on SPARC, Alpha and x86 ISAs using full system simulators and also using real hardware. The results show that the power viruses generated for single-core systems consume 14-41% more power compared to MPrime on SPARC ISA. Similarly, the power viruses generated for multicore systems consume 45-98%, 40-89% and 41-56% more power than PARSEC workloads, running multiple copies of MPrime and multithreaded SPECjbb respectively.Electrical and Computer Engineerin