9,753 research outputs found
Virtual reality training and assessment in laparoscopic rectum surgery
Background: Virtual-reality (VR) based simulation techniques offer an efficient and low cost alternative to conventional surgery training. This article describes a VR training and assessment system in laparoscopic rectum surgery. Methods: To give a realistic visual performance of interaction between membrane tissue and surgery tools, a generalized cylinder based collision detection and a multi-layer mass-spring model are presented. A dynamic assessment model is also designed for hierarchy training evaluation. Results: With this simulator, trainees can operate on the virtual rectum with both visual and haptic sensation feedback simultaneously. The system also offers surgeons instructions in real time when improper manipulation happens. The simulator has been tested and evaluated by ten subjects. Conclusions: This prototype system has been verified by colorectal surgeons through a pilot study. They believe the visual performance and the tactile feedback are realistic. It exhibits the potential to effectively improve the surgical skills of trainee surgeons and significantly shorten their learning curve. © 2014 John Wiley & Sons, Ltd
NOViSE: a virtual natural orifice transluminal endoscopic surgery simulator
Purpose: Natural Orifice Transluminal Endoscopic Surgery (NOTES) is a novel technique in minimally invasive surgery whereby a flexible endoscope is inserted via a natural orifice to gain access to the abdominal cavity, leaving no external scars. This innovative use of flexible endoscopy creates many new challenges and is associated with a steep learning curve for clinicians. Methods: We developed NOViSE - the first force-feedback enabled virtual reality simulator for NOTES training supporting a flexible endoscope. The haptic device is custom built and the behaviour of the virtual flexible endoscope is based on an established theoretical framework – the Cosserat Theory of Elastic Rods. Results: We present the application of NOViSE to the simulation of a hybrid trans-gastric cholecystectomy procedure. Preliminary results of face, content and construct validation have previously shown that NOViSE delivers the required level of realism for training of endoscopic manipulation skills specific to NOTES Conclusions: VR simulation of NOTES procedures can contribute to surgical training and improve the educational experience without putting patients at risk, raising ethical issues or requiring expensive animal or cadaver facilities. In the context of an experimental technique, NOViSE could potentially facilitate NOTES development and contribute to its wider use by keeping practitioners up to date with this novel surgical technique. NOViSE is a first prototype and the initial results indicate that it provides promising foundations for further development
Modelling Rod-like Flexible Biological Tissues for Medical Training
This paper outlines a framework for the modelling of slender rod-like biological tissue structures in both global and local scales. Volumetric discretization of a rod-like structure is expensive in computation and therefore
is not ideal for applications where real-time performance is essential. In our approach, the Cosserat rod model is introduced to capture the global shape changes, which models the structure as a one-dimensional entity, while the
local deformation is handled separately. In this way a good balance in accuracy and efficiency is achieved. These advantages make our method appropriate for
the modelling of soft tissues for medical training applications
A finite strain nonlinear human mitral valve model with fluid structure interaction
A simulated human mitral valve under a physiological pressure loading is developed using a hybrid finite element immersed boundary method, which incorporates experimentally based constitutive laws in a three-dimensional fluid-structure interaction framework. A transversely isotropic material constitutive model is used for characterizing the mechanical behaviour of the mitral valve tissue based on recent mechanical tests of healthy human mitral leaflets. Our results show good agreement, in terms of the flow rate and the closing and opening configurations, with the measurements from the magnetic resonance images. The stresses in the anterior leaflet are found to be higher than those in the posterior leaflet, and concentrated around the annulus trigons and free edges of the valve leaflets. Those areas are located where the leaflet has the highest curvature. Effects of the chordae tendineae in the material model are studied and the results show that these chordae play an important role in providing a secondary orifice for the flow when valve opens. Although there are some discrepancies to be overcome in future works, our simulations show that the developed computational model is promising in mimicking the in vivo mitral valve dynamics and providing important information that are not obtainable by in vivo measurements. This article is protected by copyright. All rights reserved
Prevalence of haptic feedback in robot-mediated surgery : a systematic review of literature
© 2017 Springer-Verlag. This is a post-peer-review, pre-copyedit version of an article published in Journal of Robotic Surgery. The final authenticated version is available online at: https://doi.org/10.1007/s11701-017-0763-4With the successful uptake and inclusion of robotic systems in minimally invasive surgery and with the increasing application of robotic surgery (RS) in numerous surgical specialities worldwide, there is now a need to develop and enhance the technology further. One such improvement is the implementation and amalgamation of haptic feedback technology into RS which will permit the operating surgeon on the console to receive haptic information on the type of tissue being operated on. The main advantage of using this is to allow the operating surgeon to feel and control the amount of force applied to different tissues during surgery thus minimising the risk of tissue damage due to both the direct and indirect effects of excessive tissue force or tension being applied during RS. We performed a two-rater systematic review to identify the latest developments and potential avenues of improving technology in the application and implementation of haptic feedback technology to the operating surgeon on the console during RS. This review provides a summary of technological enhancements in RS, considering different stages of work, from proof of concept to cadaver tissue testing, surgery in animals, and finally real implementation in surgical practice. We identify that at the time of this review, while there is a unanimous agreement regarding need for haptic and tactile feedback, there are no solutions or products available that address this need. There is a scope and need for new developments in haptic augmentation for robot-mediated surgery with the aim of improving patient care and robotic surgical technology further.Peer reviewe
A 3D discrete model of the diaphragm and human trunk
In this paper, a 3D discrete model is presented to model the movements of the
trunk during breathing. In this model, objects are represented by physical
particles on their contours. A simple notion of force generated by a linear
actuator allows the model to create forces on each particle by way of a
geometrical attractor. Tissue elasticity and contractility are modeled by local
shape memory and muscular fibers attractors. A specific dynamic MRI study was
used to build a simple trunk model comprised of by three compartments: lungs,
diaphragm and abdomen. This model was registered on the real geometry.
Simulation results were compared qualitatively as well as quantitatively to the
experimental data, in terms of volume and geometry. A good correlation was
obtained between the model and the real data. Thanks to this model, pathology
such as hemidiaphragm paralysis can also be simulated.Comment: published in: "Lung Modelling", France (2006
Real-time hybrid cutting with dynamic fluid visualization for virtual surgery
It is widely accepted that a reform in medical teaching must be made to meet today's high volume training requirements. Virtual simulation offers a potential method of providing such trainings and some current medical training simulations integrate haptic and visual feedback to enhance procedure learning. The purpose of this project is to explore the capability of Virtual Reality (VR) technology to develop a training simulator for surgical cutting and bleeding in a general surgery
A coupled mitral valve -- left ventricle model with fluid-structure interaction
Understanding the interaction between the valves and walls of the heart is
important in assessing and subsequently treating heart dysfunction. With
advancements in cardiac imaging, nonlinear mechanics and computational
techniques, it is now possible to explore the mechanics of valve-heart
interactions using anatomically and physiologically realistic models. This
study presents an integrated model of the mitral valve (MV) coupled to the left
ventricle (LV), with the geometry derived from in vivo clinical magnetic
resonance images. Numerical simulations using this coupled MV-LV model are
developed using an immersed boundary/finite element method. The model
incorporates detailed valvular features, left ventricular contraction,
nonlinear soft tissue mechanics, and fluid-mediated interactions between the MV
and LV wall. We use the model to simulate the cardiac function from diastole to
systole, and investigate how myocardial active relaxation function affects the
LV pump function. The results of the new model agree with in vivo measurements,
and demonstrate that the diastolic filling pressure increases significantly
with impaired myocardial active relaxation to maintain the normal cardiac
output. The coupled model has the potential to advance fundamental knowledge of
mechanisms underlying MV-LV interaction, and help in risk stratification and
optimization of therapies for heart diseases.Comment: 25 pages, 6 figure
Suite of Meshless Algorithms for Accurate Computation of Soft Tissue Deformation for Surgical Simulation
The ability to predict patient-specific soft tissue deformations is key for
computer-integrated surgery systems and the core enabling technology for a new
era of personalized medicine. Element-Free Galerkin (EFG) methods are better
suited for solving soft tissue deformation problems than the finite element
method (FEM) due to their capability of handling large deformation while also
eliminating the necessity of creating a complex predefined mesh. Nevertheless,
meshless methods based on EFG formulation, exhibit three major limitations: i)
meshless shape functions using higher order basis cannot always be computed for
arbitrarily distributed nodes (irregular node placement is crucial for
facilitating automated discretization of complex geometries); ii) imposition of
the Essential Boundary Conditions (EBC) is not straightforward; and, iii)
numerical (Gauss) integration in space is not exact as meshless shape functions
are not polynomial. This paper presents a suite of Meshless Total Lagrangian
Explicit Dynamics (MTLED) algorithms incorporating a Modified Moving Least
Squares (MMLS) method for interpolating scattered data both for visualization
and for numerical computations of soft tissue deformation, a novel way of
imposing EBC for explicit time integration, and an adaptive numerical
integration procedure within the Meshless Total Lagrangian Explicit Dynamics
algorithm. The appropriateness and effectiveness of the proposed methods is
demonstrated using comparisons with the established non-linear procedures from
commercial finite element software ABAQUS and experiments with very large
deformations. To demonstrate the translational benefits of MTLED we also
present a realistic brain-shift computation.Comment: Accepted for publication in Medical Image Analysi
- …