Buffer Controlled Cache for Low Power Multicore Processors

This thesis proposes a buffered dual access mode cache to reduce power consumption in multicore caches for embedded systems. This cache is called Buffer Controlled Cache (BCC cache). The proposed scheme introduces a pre-cache buffer to determine how to access the cache. The proposed cache shows better prediction rates and lower power consumption than conventional caches, such as Phased cache and Way-prediction cache. For single core implementation, Simplescalar and Cacti simulators have been used for these simulations using SPEC2000 benchmark programs. The experimental results show that the proposed cache improves the power consumption by 37%-42% over the conventional caches. Multi2Sim and McPAT simulators have been used for the multicore simulations using the Parsec benchmark programs. The experimental results show that the proposed cache improves the power consumption by as much as 54% over conventional caches

A survey of system level power management schemes in the dark-silicon era for many-core architectures

Power consumption in Complementary Metal Oxide Semiconductor (CMOS) technology has escalated to a point that only a fractional part of many-core chips can be powered-on at a time. Fortunately, this fraction can be increased at the expense of performance through the dark-silicon solution. However, with many-core integration set to be heading towards its thousands, power consumption and temperature increases per time, meaning the number of active nodes must be reduced drastically. Therefore, optimized techniques are demanded for continuous advancement in technology. Existing efforts try to overcome this challenge by activating nodes from different parts of the chip at the expense of communication latency. Other efforts on the other hand employ run-time power management techniques to manage the power performance of the cores trading-off performance for power. We found out that, for a significant amount of power to saved and high temperature to be avoided, focus should be on reducing the power consumption of all the on-chip components. Especially, the memory hierarchy and the interconnect. Power consumption can be minimized by, reducing the size of high leakage power dissipating elements, turning-off idle resources and integrating power saving materials

Memory hierarchy reconfiguration for energy and performance in general-purpose processor architectures

Journal ArticleConventional microarchitectures choose a single memory hierarchy design point targeted at the average application. In this paper we propose a cache and TLB layout and design that leverages repeater insertion to provide dynamic low-cost configurability trading of size and speed on a per application phase basis. A novel configuration management algorithm dynamically detects phase changes and reacts to an application's hit and miss intolerance in order to improve memory hierarchy performance while taking energy consumption into consideration. When applied to a two-level cache and TLB hierarchy at O.Ipm technology, the result is an average 15% reduction in cycles per instruction (CPI), corresponding to an average 27% reduction in memory-CPI, across a broad class of applications compared to the best conventional two-level hierarchy of comparable size. Projecting to sub-. I pm technology design considerations that call for a three-level conventional cache hierarchy for performance reasons, we demonstrate that a configurable L2/L3 cache hierarchy coupled with a conventional LI results in an average 43% reduction in memory hierarchy energy in addition to improved performance

Affordable techniques for dependable microprocessor design

As high computing power is available at an affordable cost, we rely on microprocessor-based systems for much greater variety of applications. This dependence indicates that a processor failure could have more diverse impacts on our daily lives. Therefore, dependability is becoming an increasingly important quality measure of microprocessors.;Temporary hardware malfunctions caused by unstable environmental conditions can lead the processor to an incorrect state. This is referred to as a transient error or soft error. Studies have shown that soft errors are the major source of system failures. This dissertation characterizes the soft error behavior on microprocessors and presents new microarchitectural approaches that can realize high dependability with low overhead.;Our fault injection studies using RISC processors have demonstrated that different functional blocks of the processor have distinct susceptibilities to soft errors. The error susceptibility information must be reflected in devising fault tolerance schemes for cost-sensitive applications. Considering the common use of on-chip caches in modern processors, we investigated area-efficient protection schemes for memory arrays. The idea of caching redundant information was exploited to optimize resource utilization for increased dependability. We also developed a mechanism to verify the integrity of data transfer from lower level memories to the primary caches. The results of this study show that by exploiting bus idle cycles and the information redundancy, an almost complete check for the initial memory data transfer is possible without incurring a performance penalty.;For protecting the processor\u27s control logic, which usually remains unprotected, we propose a low-cost reliability enhancement strategy. We classified control logic signals into static and dynamic control depending on their changeability, and applied various techniques including commit-time checking, signature caching, component-level duplication, and control flow monitoring. Our schemes can achieve more than 99% coverage with a very small hardware addition. Finally, a virtual duplex architecture for superscalar processors is presented. In this system-level approach, the processor pipeline is backed up by a partially replicated pipeline. The replication-based checker minimizes the design and verification overheads. For a large-scale superscalar processor, the proposed architecture can bring 61.4% reduction in die area while sustaining the maximum performance

Microarchitectural techniques to reduce energy consumption in the memory hierarchy

This thesis states that dynamic profiling of the memory reference stream can improve energy and performance in the memory hierarchy. The research presented in this theses provides multiple instances of using lightweight hardware structures to profile the memory reference stream. The objective of this research is to develop microarchitectural techniques to reduce energy consumption at different levels of the memory hierarchy. Several simple and implementable techniques were developed as a part of this research. One of the techniques identifies and eliminates redundant refresh operations in DRAM and reduces DRAM refresh power. Another, reduces leakage energy in L2 and higher level caches for multiprocessor systems. The emphasis of this research has been to develop several techniques of obtaining energy savings in caches using a simple hardware structure called the counting Bloom filter (CBF). CBFs have been used to predict L2 cache misses and obtain energy savings by not accessing the L2 cache on a predicted miss. A simple extension of this technique allows CBFs to do way-estimation of set associative caches to reduce energy in cache lookups. Another technique using CBFs track addresses in a Virtual Cache and reduce false synonym lookups. Finally this thesis presents a technique to reduce dynamic power consumption in level one caches using significance compression. The significant energy and performance improvements demonstrated by the techniques presented in this thesis suggest that this work will be of great value for designing memory hierarchies of future computing platforms.Ph.D.Committee Chair: Lee, Hsien-Hsin S.; Committee Member: Cahtterjee,Abhijit; Committee Member: Mukhopadhyay, Saibal; Committee Member: Pande, Santosh; Committee Member: Yalamanchili, Sudhaka

The Cost of Application-Class Processing: Energy and Performance Analysis of a Linux-Ready 1.7-GHz 64-Bit RISC-V Core in 22-nm FDSOI Technology

The open-source RISC-V instruction set architecture (ISA) is gaining traction, both in industry and academia. The ISA is designed to scale from microcontrollers to server-class processors. Furthermore, openness promotes the availability of various open-source and commercial implementations. Our main contribution in this paper is a thorough power, performance, and efficiency analysis of the RISC-V ISA targeting baseline "application class" functionality, i.e., supporting the Linux OS and its application environment based on our open-source single-issue in-order implementation of the 64-bit ISA variant (RV64GC) called Ariane. Our analysis is based on a detailed power and efficiency analysis of the RISC-V ISA extracted from silicon measurements and calibrated simulation of an Ariane instance (RV64IMC) taped-out in GlobalFoundries 22FDX technology. Ariane runs at up to 1.7-GHz, achieves up to 40-Gop/sW energy efficiency, which is superior to similar cores presented in the literature. We provide insight into the interplay between functionality required for the application-class execution (e.g., virtual memory, caches, and multiple modes of privileged operation) and energy cost. We also compare Ariane with RISCY, a simpler and a slower microcontroller-class core. Our analysis confirms that supporting application-class execution implies a nonnegligible energy-efficiency loss and that compute performance is more cost-effectively boosted by instruction extensions (e.g., packed SIMD) rather than the high-frequency operation

The effect of an optical network on-chip on the performance of chip multiprocessors

Optical networks on-chip (ONoC) have been proposed to reduce power consumption and increase bandwidth density in high performance chip multiprocessors (CMP), compared to electrical NoCs. However, as buffering in an ONoC is not viable, the end-to-end message path needs to be acquired in advance during which the message is buffered at the network ingress. This waiting latency is therefore a combination of path setup latency and contention and forms a significant part of the total message latency. Many proposed ONoCs, such as Single Writer, Multiple Reader (SWMR), avoid path setup latency at the expense of increased optical components. In contrast, this thesis investigates a simple circuit-switched ONoC with lower component count where nodes need to request a channel before transmission. To hide the path setup latency, a coherence-based message predictor is proposed, to setup circuits before message arrival. Firstly, the effect of latency and bandwidth on application performance is thoroughly investigated using full-system simulations of shared memory CMPs. It is shown that the latency of an ideal NoC affects the CMP performance more than the NoC bandwidth. Increasing the number of wavelengths per channel decreases the serialisation latency and improves the performance of both ONoC types. With 2 or more wavelengths modulating at 25 Gbit=s , the ONoCs will outperform a conventional electrical mesh (maximal speedup of 20%). The SWMR ONoC outperforms the circuit-switched ONoC. Next coherence-based prediction techniques are proposed to reduce the waiting latency. The ideal coherence-based predictor reduces the waiting latency by 42%. A more streamlined predictor (smaller than a L1 cache) reduces the waiting latency by 31%. Without prediction, the message latency in the circuit-switched ONoC is 11% larger than in the SWMR ONoC. Applying the realistic predictor reverses this: the message latency in the SWMR ONoC is now 18% larger than the predictive circuitswitched ONoC

Ultra low-power, high-performance accelerator for speech recognition

Automatic Speech Recognition (ASR) is undoubtedly one of the most important and interesting applications in the cutting-edge era of Deep-learning deployment, especially in the mobile segment. Fast and accurate ASR comes at a high energy cost, requiring huge memory storage and computational power, which is not affordable for the tiny power budget of mobile devices. Hardware acceleration can reduce power consumption of ASR systems as well as reducing its memory pressure, while delivering high-performance. In this thesis, we present a customized accelerator for large-vocabulary, speaker-independent, continuous speech recognition. A state-of-the-art ASR system consists of two major components: acoustic-scoring using DNN and speech-graph decoding using Viterbi search. As the first step, we focus on the Viterbi search algorithm, that represents the main bottleneck in the ASR system. The accelerator includes some innovative techniques to improve the memory subsystem, which is the main bottleneck for performance and power, such as a prefetching scheme and a novel bandwidth saving technique tailored to the needs of ASR. Furthermore, as the speech graph is vast taking more than 1-Gigabyte memory space, we propose to change its representation by partitioning it into several sub-graphs and perform an on-the-fly composition during the Viterbi run-time. This approach together with some simple yet efficient compression techniques result in 31x memory footprint reduction, providing 155x real-time speedup and orders of magnitude power and energy saving compared to CPUs and GPUs. In the next step, we propose a novel hardware-based ASR system that effectively integrates a DNN accelerator for the pruned/quantized models with the Viterbi accelerator. We show that, when either pruning or quantizing the DNN model used for acoustic scoring, ASR accuracy is maintained but the execution time of the ASR system is increased by 33%. Although pruning and quantization improves the efficiency of the DNN, they result in a huge increase of activity in the Viterbi search since the output scores of the pruned model are less reliable. In order to avoid the aforementioned increase in Viterbi search workload, our system loosely selects the N-best hypotheses at every time step, exploring only the N most likely paths. Our final solution manages to efficiently combine both DNN and Viterbi accelerators using all their optimizations, delivering 222x real-time ASR with a small power budget of 1.26 Watt, small memory footprint of 41 MB, and a peak memory bandwidth of 381 MB/s, being amenable for low-power mobile platforms.Los sistemas de reconocimiento automático del habla (ASR por sus siglas en inglés, Automatic Speech Recognition) son sin lugar a dudas una de las aplicaciones más relevantes en el área emergente de aprendizaje profundo (Deep Learning), specialmente en el segmento de los dispositivos móviles. Realizar el reconocimiento del habla de forma rápida y precisa tiene un elevado coste en energía, requiere de gran capacidad de memoria y de cómputo, lo cual no es deseable en sistemas móviles que tienen severas restricciones de consumo energético y disipación de potencia. El uso de arquitecturas específicas en forma de aceleradores hardware permite reducir el consumo energético de los sistemas de reconocimiento del habla, al tiempo que mejora el rendimiento y reduce la presión en el sistema de memoria. En esta tesis presentamos un acelerador específicamente diseñado para sistemas de reconocimiento del habla de gran vocabulario, independientes del orador y que funcionan en tiempo real. Un sistema de reconocimiento del habla estado del arte consiste principalmente en dos componentes: el modelo acústico basado en una red neuronal profunda (DNN, Deep Neural Network) y la búsqueda de Viterbi basada en un grafo que representa el lenguaje. Como primer objetivo nos centramos en la búsqueda de Viterbi, ya que representa el principal cuello de botella en los sistemas ASR. El acelerador para el algoritmo de Viterbi incluye técnicas innovadoras para mejorar el sistema de memoria, que es el mayor cuello de botella en rendimiento y energía, incluyendo técnicas de pre-búsqueda y una nueva técnica de ahorro de ancho de banda a memoria principal específicamente diseñada para sistemas ASR. Además, como el grafo que representa el lenguaje requiere de gran capacidad de almacenamiento en memoria (más de 1 GB), proponemos cambiar su representación y dividirlo en distintos grafos que se componen en tiempo de ejecución durante la búsqueda de Viterbi. De esta forma conseguimos reducir el almacenamiento en memoria principal en un factor de 31x, alcanzar un rendimiento 155 veces superior a tiempo real y reducir el consumo energético y la disipación de potencia en varios órdenes de magnitud comparado con las CPUs y las GPUs. En el siguiente paso, proponemos un novedoso sistema hardware para reconocimiento del habla que integra de forma efectiva un acelerador para DNNs podadas y cuantizadas con el acelerador de Viterbi. Nuestros resultados muestran que podar y/o cuantizar el DNN para el modelo acústico permite mantener la precisión pero causa un incremento en el tiempo de ejecución del sistema completo de hasta el 33%. Aunque podar/cuantizar mejora la eficiencia del DNN, éstas técnicas producen un gran incremento en la carga de trabajo de la búsqueda de Viterbi ya que las probabilidades calculadas por el DNN son menos fiables, es decir, se reduce la confianza en las predicciones del modelo acústico. Con el fin de evitar un incremento inaceptable en la carga de trabajo de la búsqueda de Viterbi, nuestro sistema restringe la búsqueda a las N hipótesis más probables en cada paso de la búsqueda. Nuestra solución permite combinar de forma efectiva un acelerador de DNNs con un acelerador de Viterbi incluyendo todas las optimizaciones de poda/cuantización. Nuestro resultados experimentales muestran que dicho sistema alcanza un rendimiento 222 veces superior a tiempo real con una disipación de potencia de 1.26 vatios, unos requisitos de memoria modestos de 41 MB y un uso de ancho de banda a memoria principal de, como máximo, 381 MB/s, ofreciendo una solución adecuada para dispositivos móviles