Bit-rate Aware Reconfigurable Architecture For H.264/avc Deblocking Filter

In H.264/AVC, DeBlocking Filter (DBF) achieves bit rate savings and it is used to improve visual quality by reducing the presence of blocking artifacts. However, these advantages come at the expense of increasing computational complexity of the DBF due to highly adaptive mode decision and small 4x4 block size. The DBF easily accounts for one third of the computational complexity of the decoder. The computational complexity required for various target applications from mobile to high definition video applications varies significantly. Therefore, it becomes apparent to design efficient architecture to adapt to different requirements. In this work, we exploit the scalability on both the hardware level and the algorithmic level to synergize the performance and to reduce computational complexity. First, we propose a modular DBF architecture which can be scaled to adapt to the required computing capability for various bit-rates, resolutions, and frame rates of video sequences. The scalable architecture is based on FPGA using dynamic partial reconfiguration. This desirable feature of FPGAs makes it possible for different hardware configurations to be implemented during run-time. The proposed design can be scaled to filter up to four different edges simultaneously, resulting in significant reduction of total processing time. Secondly, our experiments show by lowering the bit rate of video sequences, significant reduction in computational complexity can be achieved by the increased presence of skipped macroblocks, thus, avoiding redundant filtering operations. The implemented architecture has been evaluated using Xilinx Virtex-4 ML410 FPGA board. The design can operate at a maximum frequency of 103 MHz. The reconfiguration is done through Internal Configuration Access Port (ICAP) to achieve maximum performance needed by real time applications

Architectures for Adaptive Low-Power Embedded Multimedia Systems

This Ph.D. thesis describes novel hardware/software architectures for adaptive low-power embedded multimedia systems. Novel techniques for run-time adaptive energy management are proposed, such that both HW & SW adapt together to react to the unpredictable scenarios. A complete power-aware H.264 video encoder was developed. Comparison with state-of-the-art demonstrates significant energy savings while meeting the performance constraint and keeping the video quality degradation unnoticeable

Reconfigurable Architecture For H.264/avc Variable Block Size Motion Estimation Based On Motion Activity And Adaptive Search Range

Motion Estimation (ME) technique plays a key role in the video coding systems to achieve high compression ratios by removing temporal redundancies among video frames. Especially in the newest H.264/AVC video coding standard, ME engine demands large amount of computational capabilities due to its support for wide range of different block sizes for a given macroblock in order to increase accuracy in finding best matching block in the previous frames. We propose scalable architecture for H.264/AVC Variable Block Size (VBS) Motion Estimation with adaptive computing capability to support various search ranges, input video resolutions, and frame rates. Hardware architecture of the proposed ME consists of scalable Sum of Absolute Difference (SAD) arrays which can perform Full Search Block Matching Algorithm (FSBMA) for smaller 4x4 blocks. It is also shown that by predicting motion activity and adaptively adjusting the Search Range (SR) on the reconfigurable hardware platform, the computational cost of ME required for inter-frame encoding in H.264/AVC video coding standard can be reduced significantly. Dynamic Partial Reconfiguration is a unique feature of Field Programmable Gate Arrays (FPGAs) that makes best use of hardware resources and power by allowing adaptive algorithm to be implemented during run-time. We exploit this feature of FPGA to implement the proposed reconfigurable architecture of ME and maximize the architectural benefits through prediction of motion activities in the video sequences ,adaptation of SR during run-time, and fractional ME refinement. The implemented ME architecture can support real time applications at a maximum frequency of 90MHz with multiple reconfigurable regions. iv When compared to reconfiguration of complete design, partial reconfiguration process results in smaller bitstream size which allows FPGA to implement different configurations at higher speed. The proposed architecture has modular structure, regular data flow, and efficient memory organization with lower memory accesses. By increasing the number of active partial reconfigurable modules from one to four, there is a 4 fold increase in data re-use. Also, by introducing adaptive SR reduction algorithm at frame level, the computational load of ME is reduced significantly with only small degradation in PSNR (≤0.1dB)

Recent Advances in Embedded Computing, Intelligence and Applications

The latest proliferation of Internet of Things deployments and edge computing combined with artificial intelligence has led to new exciting application scenarios, where embedded digital devices are essential enablers. Moreover, new powerful and efficient devices are appearing to cope with workloads formerly reserved for the cloud, such as deep learning. These devices allow processing close to where data are generated, avoiding bottlenecks due to communication limitations. The efficient integration of hardware, software and artificial intelligence capabilities deployed in real sensing contexts empowers the edge intelligence paradigm, which will ultimately contribute to the fostering of the offloading processing functionalities to the edge. In this Special Issue, researchers have contributed nine peer-reviewed papers covering a wide range of topics in the area of edge intelligence. Among them are hardware-accelerated implementations of deep neural networks, IoT platforms for extreme edge computing, neuro-evolvable and neuromorphic machine learning, and embedded recommender systems

Exploring Processor and Memory Architectures for Multimedia

Multimedia has become one of the cornerstones of our 21st century society and, when combined with mobility, has enabled a tremendous evolution of our society. However, joining these two concepts introduces many technical challenges. These range from having sufficient performance for handling multimedia content to having the battery stamina for acceptable mobile usage. When taking a projection of where we are heading, we see these issues becoming ever more challenging by increased mobility as well as advancements in multimedia content, such as introduction of stereoscopic 3D and augmented reality. The increased performance needs for handling multimedia come not only from an ongoing step-up in resolution going from QVGA (320x240) to Full HD (1920x1080) a 27x increase in less than half a decade. On top of this, there is also codec evolution (MPEG-2 to H.264 AVC) that adds to the computational load increase. To meet these performance challenges there has been processing and memory architecture advances (SIMD, out-of-order superscalarity, multicore processing and heterogeneous multilevel memories) in the mobile domain, in conjunction with ever increasing operating frequencies (200MHz to 2GHz) and on-chip memory sizes (128KB to 2-3MB). At the same time there is an increase in requirements for mobility, placing higher demands on battery-powered systems despite the steady increase in battery capacity (500 to 2000mAh). This leaves negative net result in-terms of battery capacity versus performance advances. In order to make optimal use of these architectural advances and to meet the power limitations in mobile systems, there is a need for taking an overall approach on how to best utilize these systems. The right trade-off between performance and power is crucial. On top of these constraints, the flexibility aspects of the system need to be addressed. All this makes it very important to reach the right architectural balance in the system. The first goal for this thesis is to examine multimedia applications and propose a flexible solution that can meet the architectural requirements in a mobile system. Secondly, propose an automated methodology of optimally mapping multimedia data and instructions to a heterogeneous multilevel memory subsystem. The proposed methodology uses constraint programming for solving a multidimensional optimization problem. Results from this work indicate that using today’s most advanced mobile processor technology together with a multi-level heterogeneous on-chip memory subsystem can meet the performance requirements for handling multimedia. By utilizing the automated optimal memory mapping method presented in this thesis lower total power consumption can be achieved, whilst performance for multimedia applications is improved, by employing enhanced memory management. This is achieved through reduced external accesses and better reuse of memory objects. This automatic method shows high accuracy, up to 90%, for predicting multimedia memory accesses for a given architecture

A Reconfigurable Processor for Heterogeneous Multi-Core Architectures

A reconfigurable processor is a general-purpose processor coupled with an FPGA-like reconfigurable fabric. By deploying application-specific accelerators, performance for a wide range of applications can be improved with such a system. In this work concepts are designed for the use of reconfigurable processors in multi-tasking scenarios and as part of multi-core systems

Towards Computational Efficiency of Next Generation Multimedia Systems

To address throughput demands of complex applications (like Multimedia), a next-generation system designer needs to co-design and co-optimize the hardware and software layers. Hardware/software knobs must be tuned in synergy to increase the throughput efficiency. This thesis provides such algorithmic and architectural solutions, while considering the new technology challenges (power-cap and memory aging). The goal is to maximize the throughput efficiency, under timing- and hardware-constraints