Methane emission by alpaca and sheep fed on lucerne hay or grazed on pastures of perennial ryegrass/white clover or birdsfoot trefoil

Based on the knowledge that alpaca (Lama pacos) have a lower fractional outflow rate of feed particles (particulate FOR) from their forestomach than sheep (San Martin 1987), the current study measured methane (CH4) production and other digestion parameters in these species in three successive experiments (1, 2 and 3): Experiment 1, lucerne hay fed indoors; Experiment 2, grazed on perennial ryegrass/white clover pasture (PRG/WC); and Experiment 3, grazed on birdsfoot trefoil (Lotus corniculatits) pasture (Lotus). Six male alpaca and six castrated Romney sheep were simultaneously and successively fed on the forages either ad libitium or at generous herbage allowances (grazing). CH4 production (g/day) (using the sulphur hexafluoride tracer technique), voluntary feed intake (VFI), diet quality, and protozoa counts and volatile fatty acid concentrations in samples of forestomach contents were determined. In addition, feed digestibility, energy and nitrogen (N) balances and microbial N supply from the forestomach (using purine derivatives excretion) were measured in Experiment 1. Diets selected by alpaca were of lower quality than those selected by sheep, and the voluntary gross energy intakes (GEI, MJ) per kg of liveweight(0.75) were consistently lower (P0.05) in their CH4 yields (% GEI) when fed on lucerne hay (5.1 v. 4.7), but alpaca had a higher CH4 yield when fed on PRG/WC (9.4 v. 7.5, P0.05) in diet N partition or microbial N yield, but alpaca had higher (P<0.05) neutral detergent fibre digestibility (0.478 v. 0.461) and lower (P<0.01) urinary energy losses (5.2 v. 5.8 % GEI) than sheep. It is suggested that differences between these species in forestomach particulate FOR might have been the underlying physiological mechanism responsible for the differences in CH4 yield, although the between-species differences in VFI and diet quality also had a major effect on it

Persistence of differences between sheep in methane emission under generous grazing conditions

Four low and four high methane (CH4) emitters were selected from a flock of 20 Romney sheep on the basis of CH4 production rates per unit of intake, measured at grazing using the sulphur hexafluoride (SF,) tracer technique. Methane emissions from these sheep were monitored at grazing for four periods (P): October, November, January and February 1999/2000. All measurements were carried out on perennial ryegrass/white clover pasture under generous herbage allowance, and the sheep were maintained on similar pastures during non-measurement periods. The tracer technique was used for all the CH4 measurements and feed DM intake was calculated from total faecal collection and estimated DM digestibility. Data for liveweight (LW), gross energy intake (GEI) and CH4 emission were analysed using split-plot analysis of variance. In addition, a between-period rank order correlation analysis was carried out for CH4 emission data. Low CH4 emitters were heavier (P < 0.05) than the high emitters in all the periods, but they did not differ (P < 0.05) in their gross energy intakes (GEL MJ/kg LW0.75). Low and high CH4 emitters consistently maintained their initial rankings in CH4 yield (% GEI) throughout the subsequent periods and the correlation analysis of rank order for CH4 yield showed strong between-period correlation coefficients, although this was weaker in the last period. It is suggested that feeding conditions that maximize feed intake (e.g. generous allowance of good quality pasture under grazing) favour the expression and persistence of between-sheep differences in CH4 yield

Rumen function and digestion parameters associated with differences between sheep in methane emissions when fed chaffed lucerne hay

An indoor experiment involving 10 rumen-cannulated Romney sheep was conducted in May and June 1998 at AgResearch Grasslands, Palmerston North, New Zealand, under restricted feeding conditions. in order to test the hypothesis that animal factors, in particular rumen fractional outflow rate (FOR) and rumen volume, have an influence on the between-sheep variation in methane (CH4) emission. Sheep were fed 2-hourly on chaffed lucerne hay. Following an acclimatization period of 21 days, the experiment lasted 16 days. Energy and nitrogen (N) balances were measured on days 1-6. Cr-EDTA marker was continuously infused into the rumen from day 9 to 16, and rumen contents emptied and sampled on days 13 and 16. Particulate and fluid FOR were estimated using feed lignin and Cr-EDTA, respectively. Daily CH, production was measured by the sulphur hexafluoride tracer technique on days 2, 5, 6, 12 and 15 of the experiment. CH4 production (g/day) was positively correlated with the pool size of organic matter (OM) in the rumen (OM pool, g) (r = 0.84, P = 0.002), OM intake (OMI, g/day) (r = 0.67, P = 0.04), and the rumen fill (g. wet digesta) (r = 0.76, P = 0.01). Multiple regression analysis showed that CH4 production was best predicted (R-2 = 0.88) as a function of OM pool and the molar % of butyrate; however, OM pool alone accounted for a large proportion (R-2 = 0.71) of the variation in CH4 production. CH4 yield (% gross energy intake, % GEI) was negatively correlated with the particulate FOR (%/h) ( r= -0.75, P = 0.01) and buffering capacity of rumen fluid (mmol HCl) (r = -0.72, P = 0.02) but positively correlated with the digestibility of cellulose (r = 0.66, P = 0.04). Multiple regression analysis showed that CH, yield was best predicted as a function of particulate FOR, OMI (g/kg liveweight(0.75)) and the molar % of butyrate (R-2 = 0.88). Particulate FOR alone explained a large proportion (R-2 = 0.57) of the variation in CH4 Yield. Particulate FOR was negatively correlated with rumen fill (r = -0.69, P = 0.03) and digestibility of cellulose (r = -0.65, P = 0.04). These results suggest that sheep with lower rumen particulate FOR (i.e. longer rumen retention times) had larger rumen fills and higher fibre digestibilities and CH4 yields. If rumen particulate FOR is to be used as a tool for CH4 mitigation, the repeatability of its relationship to CH4 emission must be assessed, preferably under grazing conditions

Lower Cretaceous (Hauterivian-Albian) ammonite biostratigraphy in the Maestrat Basin (E Spain)

Peer reviewedPublisher PD

La puesta en valor de los pinos y los pinares de Mallorca: una necesidad ambiental y un reto social

Se presentan distintos inventarios forestales históricos. Estos permiten constatar la gran transformación experimentada por los bosques de Mallorca en las últimas décadas. Se analiza la intensidad y rentabilidad con que se aprovechó el arbolado forestal hasta finales de la década de los 60 del pasado siglo. Se contrasta la antigua utilidad de los pinares, con la percepción de una carencia de aprecio por parte de la actual sociedad mallorquina hacia los pinos y los pinares que cubren la mayor parte de las superficies forestales de la isla. Se exponen algunas de las causas que podrían haber contribuido a la generación y arraigo de falsas opiniones respecto a esta especie forestal (Pinus halepensis, pino carrasco, pi blanc). Por último, se proporcionan argumentos que permiten contradecir dichos mitos, para facilitar la precisa puesta en valor ambiental y social de los pinares de Mallorca

A bitwise clique detection approach for accelerating power graph computation and clustering dense graphs

Graphs are at the essence of many data representations. The visual analytics over graphs is usually difficult due to their size, which makes their visual display challenging, and their fundamental algorithms, which are often classified as NP-hard problems. The Power Graph Analysis (PGA) is a method that simplifies networks using reduced representations for complete subgraphs (cliques) and complete bipartite subgraphs (bicliques), in both cases with edge reductions. The benefits of a power graph are the preservation of information and its capacity to show essential information about the original network. However, finding an optimal representation (maximum edges reduction) is also an NPhard problem. In this work, we propose BCD, a greedy algorithm that uses a Bitwise Clique Detection approach to finding power graphs. BCD is faster than competing strategies and allows the analysis of bigger graphs. For the display of larger power graphs, we propose an orthogonal layout to prevent overlapping of edges and vertices. Finally, we describe how the structure induced by the power graph is used for clustering analysis of dense graphs. We demonstrate with several datasets the results obtained by our proposal and compare against competing strategies.Os grafos são essenciais para muitas representações de dados. A análise visual de grafos é usualmente difícil devido ao tamanho, o que representa um desafio para sua visualização. Além de isso, seus algoritmos fundamentais são frequentemente classificados como NP-difícil. Análises dos grafos de potência (PGA em inglês) é um método que simplifica redes usando representações reduzidas para subgrafos completos chamados cliques e subgrafos bipartidos chamados bicliques, em ambos casos com una redução de arestas. Os benefícios da representação de grafo de potência são a preservação de informação e a capacidade de mostrar a informação essencial sobre a rede original. Entretanto, encontrar uma representação ótima (a máxima redução de arestas possível) é também um problema NP-difícil. Neste trabalho, propomos BCD, um algoritmo guloso que usa um abordagem de detecção de bicliques baseado em operações binarias para encontrar representações de grafos de potencia. O BCD é mas rápido que as estratégias atuais da literatura. Finalmente, descrevemos como a estrutura induzida pelo grafo de potência é utilizado para as análises dos grafos densos na detecção de agrupamentos de nodos

Colaboración exitosa : un caso de estudio sobre colaboración entre el sector público y privado para alinear la oferta de educación técnica con las necesidades del mercado laboral en el Perú

Según importantes informes realizados sobre los programas peruanos de educación y formación profesional (FP), actualmente existe una falta de alineación entre la oferta educativa y las necesidades del mercado laboral. En este contexto, esta investigación estudia un caso exitoso de colaboración entre una escuela pública y el sector privado que resultó en el desarrollo de un plan de estudios que responde a las necesidades del sector productivo. El objetivo de esta investigación es explicar una colaboración exitosa entre actores públicos y privados y examinar los factores que influyeron en ella. Con este estudio, se busca contribuir a los recursos que los encargados de formular políticas en el campo de la educación técnica podrían utilizar como referencia para el desarrollo o la mejora de políticas destinadas a fomentar la colaboración entre los actores públicos y privados. El estudio consta de dos partes, una revisión teórica y una fase empírica. Durante la revisión teórica, se identificaron nueve factores que influyen en la colaboración exitosa, así como el criterio para evaluar la colaboración exitosa. Estos factores son recursos, reglas, múltiples lógicas institucionales, desequilibrios de poder, planificación, confianza, comunicación, compromiso y liderazgo. Luego, la fase empírica comenzó con la recopilación de datos. Este proceso tuvo lugar durante los meses de mayo y junio de 2017. En este período, se realizaron doce entrevistas en Lima, Perú, con la participación de diferentes actores del proceso de colaboración, así como funcionarios públicos del Ministerio de Educación. Complementariamente, se llevó a cabo un proceso de revisión de documentos. Como resultado, pudimos identificar que todos los factores incluidos en el marco conceptual, excepto el factor de las reglas, influyeron en el resultado exitoso. Además, se identificó que el liderazgo fue el factor fundamental en el estudio de caso. Sobre la base de esto, podemos argumentar que la gestión de la red es una actividad central dentro de las redes de gobierno. Además, se identificaron y discutieron otros hallazgos importantes relacionados con las características específicas del caso.Perú. Autoridad Nacional del Servicio Civil (Servir) : Beca Reto ExcelenciaTesi

Paisaje y esencia castellana en construcción

Díaz Viana , Luis. (2011). Viana de Cega: Entre dos ríos. Etnografía, historia y medio natural de un pueblo de la Tierra de Pinares. Valladolid: Diputación de Valladolid

Geology of the 'Sénia stone' from Ulldecona, Catalonia (Aptian, Maestrat Basin, Iberian Chain) and its implications for regional stratigraphy

The municipality of the town of Ulldecona (Catalonia) is notable for extensive quarrying activities, which exploit limestone, popularly named Stone from Ulldecona, for ornamental and building purposes. The Stone from Ulldecona, commercially known as S enia stone, is one of the most important ornamental and building stones quarried in Catalonia, and is used worldwide in all kinds of public and private buildings. Little is known about the geological nature of this stratigraphic interval of commercial value. Therefore, this study explores the geology of the Stone from Ulldecona in open pit quarries and natural outcrops. The Stone from Ulldecona consists of limestones of upper lower Aptian age, including wackestone, packstone and grainstone textures containing peloids, miliolids, Palorbitolina lenticularis, Orbitolinopsis simplex, Paracoskinolina maynci, Lithocodium aggregatum, Choffatella decipiens, Salpingoporella muehlbergi, Chondrodonta, Toucasia carinata, Polyconites sp. and Mathesia darderi. These platform carbonates rich in orbitolinids and rudists belong to the Villarroya de los Pinares Formation of the Maestrat Basin. Locally, the limestones are highly bioturbated and/or dolomitized. Dolomitic limestones, calcitic dolostones and dolostones are stratabound tabular geobodies with thicknesses of up to 60 m. Dolomitic limestones and calcitic dolostones corresponding to initial and intermediate stages of dolomitization mainly exhibit isolated euhedral dolomite crystals or idiotopic mosaics. Dolostones (advanced dolomitization stages) are sucrose, exhibit vacuolar and cave porosities, and are characterized by idiotopic and hypidiotopic mosaics, which indicate temperatures lower than 50-60 C during dolomitization. Dolomite textures are mainly fabric-destructive and pervasive, but locally retentive and/or selective fabrics also occur. The limestones of the Villarroya de los Pinares Formation, the underlying marls of the Forcall Formation and the overlying marls and platform carbonates of the Benassal Formation examined can be arranged into two high-rank, low-frequency transgressive-regressive sequences. Similar coeval long-term transgressive- regressive trends have been reported from other basins, indicating that eustatism largely controlled accommodation of the Aptian succession studied in Ulldecona