Involving users in OPAC interface design: Perspective from a UK study

This is the post-print versoin of the Article. The official published version can be accessed from the link below - Copyright @ 2007 SpringerThe purpose of this study was to determine user suggestions for a typical OPAC (Online Public Library Catalogue) application’s functionality and features. An experiment was undertaken to find out the type of interactions features that users prefer to have in an OPAC. The study revealed that regardless of users’ Information Technology (IT) backgrounds, their functionality expectations of OPACs are the same. However, based on users’ previous experiences with OPACs, their requirements with respect to specific features may change. Users should be involved early in the OPAC development cycle process in order to ensure usable and functional interface

Prediction of ammonia concentration in water based on microwave spectroscopy

Ammonia is a common pollutant in water as the result of runoff in agricultural areas where it is applied as fertilizer. It must be monitored regulary for safety purpose. The current testing technique does not allow on-site measurement as the equipment are bulky, the measurement process is time-consuming and tedious with additional mixing reagents. In this study, the presence of ammonia in distilled water is estimated from open-ended coaxial probe in the range of 200 MHz to 14000 MHz. Experimental results were obtained from two set of samples with seven different ammonia concentration each. The measurements are repeated thrice hence producing forty-two data sets with 550 points. Both curve fitting and multiple regression analysis were considered to perform valid ammonia concentration projection. Validation based on 5-fold and 10-fold cross validation suggested the feasibility of the technique as it presents root mean square error (RMSE) which is less than 0.02 in the ammonia prediction. Detection method based on open-ended probe would be convenient, simple and accurate method for in-situ determination of ammonia concentration

Crystal Structure of the Pre-fusion Nipah Virus Fusion Glycoprotein Reveals a Novel Hexamer-of-Trimers Assembly.

Nipah virus (NiV) is a paramyxovirus that infects host cells through the coordinated efforts of two envelope glycoproteins. The G glycoprotein attaches to cell receptors, triggering the fusion (F) glycoprotein to execute membrane fusion. Here we report the first crystal structure of the pre-fusion form of the NiV-F glycoprotein ectodomain. Interestingly this structure also revealed a hexamer-of-trimers encircling a central axis. Electron tomography of Nipah virus-like particles supported the hexameric pre-fusion model, and biochemical analyses supported the hexamer-of-trimers F assembly in solution. Importantly, structure-assisted site-directed mutagenesis of the interfaces between F trimers highlighted the functional relevance of the hexameric assembly. Shown here, in both cell-cell fusion and virus-cell fusion systems, our results suggested that this hexamer-of-trimers assembly was important during fusion pore formation. We propose that this assembly would stabilize the pre-fusion F conformation prior to cell attachment and facilitate the coordinated transition to a post-fusion conformation of all six F trimers upon triggering of a single trimer. Together, our data reveal a novel and functional pre-fusion architecture of a paramyxoviral fusion glycoprotein

Tapered microchannel for multi-particles passive separation based on hydrodynamic resistance

Researches on separation of multi-particles utilizing microfluidic have been flourishing in recent years with the aid from advancements in microfabrication design and technology. Generally, separation is beneficial for biomedical application especially involving heterogeneous samples. Due to inherent problems of samples isolation, a simple and efficient separation device is required. Here, we present a passive tapered microchannel for multi-particles separation using hydrodynamic principle. Our emphasis is on the effect of hydrodynamic resistance coupled with tapered microchannel design. In the experiment, successful multi-particles samples separation was observed. The results were further analyzed and were in agreement with the proposed concept. This method opens the route toward robust, low-cost and high-throughput, thus it may holds potential to be integrated as one functional module in Micro Total Analysis System (µTAS)

Abnormal phenomena in a one-dimensional periodic structure containing left-handed materials

The explicit dispersion equation for a one-dimensional periodic structure with alternative layers of left-handed material (LHM) and right-handed material (RHM) is given and analyzed. Some abnormal phenomena such as spurious modes with complex frequencies, discrete modes and photon tunnelling modes are observed in the band structure. The existence of spurious modes with complex frequencies is a common problem in the calculation of the band structure for such a photonic crystal. Physical explanation and significance are given for the discrete modes (with real values of wave number) and photon tunnelling propagation modes (with imaginary wave numbers in a limited region).Comment: 10 pages, 4 figure

A roadmap for China to peak carbon dioxide emissions and achieve a 20% share of non-fossil fuels in primary energy by 2030

As part of its Paris Agreement commitment, China pledged to peak carbon dioxide (CO2) emissions around 2030, striving to peak earlier, and to increase the non-fossil share of primary energy to 20% by 2030. Yet by the end of 2017, China emitted 28% of the world's energy-related CO2 emissions, 76% of which were from coal use. How China can reinvent its energy economy cost-effectively while still achieving its commitments was the focus of a three-year joint research project completed in September 2016. Overall, this analysis found that if China follows a pathway in which it aggressively adopts all cost-effective energy efficiency and CO2 emission reduction technologies while also aggressively moving away from fossil fuels to renewable and other non-fossil resources, it is possible to not only meet its Paris Agreement Nationally Determined Contribution (NDC) commitments, but also to reduce its 2050 CO2 emissions to a level that is 42% below the country's 2010 CO2 emissions. While numerous barriers exist that will need to be addressed through effective policies and programs in order to realize these potential energy use and emissions reductions, there are also significant local environmental (e.g., air quality), national and global environmental (e.g., mitigation of climate change), human health, and other unquantified benefits that will be realized if this pathway is pursued in China

Calculating photonic Green's functions using a non-orthogonal finite difference time domain method

In this paper we shall propose a simple scheme for calculating Green's functions for photons propagating in complex structured dielectrics or other photonic systems. The method is based on an extension of the finite difference time domain (FDTD) method, originally proposed by Yee, also known as the Order-N method, which has recently become a popular way of calculating photonic band structures. We give a new, transparent derivation of the Order-N method which, in turn, enables us to give a simple yet rigorous derivation of the criterion for numerical stability as well as statements of charge and energy conservation which are exact even on the discrete lattice. We implement this using a general, non-orthogonal co-ordinate system without incurring the computational overheads normally associated with non-orthogonal FDTD. We present results for local densities of states calculated using this method for a number of systems. Firstly, we consider a simple one dimensional dielectric multilayer, identifying the suppression in the state density caused by the photonic band gap and then observing the effect of introducing a defect layer into the periodic structure. Secondly, we tackle a more realistic example by treating a defect in a crystal of dielectric spheres on a diamond lattice. This could have application to the design of super-efficient laser devices utilising defects in photonic crystals as laser cavities.Comment: RevTex file. 10 pages with 8 postscript figures. Submitted to Phys Rev