An intervention study to enhance AIDS awareness among underprivileged population in Chandigarh

BACKGROUND: It is estimated that 4 million persons are suffering from HIV infection/AIDS in India. A family health awareness campaign (FHAC) has been implemented under the National AIDS Control Programme (NACP) to scale up HIV/AIDS awareness in vulnerable groups. METHODS: A community based study was conducted in April 2001 to find the impact of FHAC and IEC activities in 12 villages and slums with a population of 1-1.5 lakhs in Chandigarh. Information was collected from 643 persons in the age group of 15-49 years, 323 in the pre-intervention phase and 320 in the post-intervention phase. RESULTS: Awareness about AIDS increased from 58.2% to 70% (p < 0.01). The major sources of information were the mass media and friends. Knowledge regarding the mode of spread also increased after the campaign. Knowledge regarding prevention of AIDS by using condoms increased from 42% to 61.2%; having a single partner, from 59% to 72.3%; using safe blood, from 14.9% to 29%; and sterile needles/syringes, from 18.1% to 33.9%. Over 90% of respondents consider AIDS a dangerous disease. CONCLUSION: Community based intervention such as FHAC and IEC activities were successful in enhancing the awareness among underprivileged groups. Since a large section of the population still remained unaware, regular efforts must be made to achieve universal awareness about AIDS

Spray deposited copper zinc tin sulphide (Cu2ZnSnS4) film as a counter electrode in dye sensitized solar cells.

PublishedThis is the author accepted manuscript. The final version is available from the Royal Society of Chemistry via the DOI in this record.Stoichiometric thin films of Cu2ZnSnS4 (CZTS) were deposited by the spray technique on a FTO coated glass substrate, with post-annealing in a H2S environment to improve the film properties. CZTS films were used as a counter electrode (CE) in Dye-Sensitized Solar Cells (DSCs) with N719 dye and an iodine electrolyte. The DSC of 0.25 cm(2) area using a CE of CZTS film annealed in a H2S environment under AM 1.5G illumination (100 mW cm(-2)) exhibited a short circuit current density (JSC) = 18.63 mA cm(-2), an open circuit voltage (VOC) = 0.65 V and a fill factor (FF) = 0.53, resulting in an overall power conversion efficiency (PCE) = 6.4%. While the DSC using as deposited CZTS film as a CE showed the PCE = 3.7% with JSC = 13.38 mA cm(-2), VOC = 0.57 V and FF = 0.48. Thus, the spray deposited CZTS films can play an important role as a CE in the large area DSC fabrication.The work presented in this paper was done under the Department of Science and Technology (DST)–Research Council UK (RCUK) project “Advancing the efficiency and production potential of excitonic solar cells”. Sanjay Kumar Swami acknowledges Ministry of National Renewable Energy (MNRE), New Delhi, India for providing the financial assistantship. Mr. Firoz Alam is also thanks for helping in initial impedance measurements

MSH3 polymorphisms and protein levels affect CAG repeat instability in huntington's disease mice

Expansions of trinucleotide CAG/CTG repeats in somatic tissues are thought to contribute to ongoing disease progression through an affected individual's life with Huntington's disease or myotonic dystrophy. Broad ranges of repeat instability arise between individuals with expanded repeats, suggesting the existence of modifiers of repeat instability. Mice with expanded CAG/CTG repeats show variable levels of instability depending upon mouse strain. However, to date the genetic modifiers underlying these differences have not been identified. We show that in liver and striatum the R6/1 Huntington's disease (HD) (CAG)~100 transgene, when present in a congenic C57BL/6J (B6) background, incurred expansion-biased repeat mutations, whereas the repeat was stable in a congenic BALB/cByJ (CBy) background. Reciprocal congenic mice revealed the Msh3 gene as the determinant for the differences in repeat instability. Expansion bias was observed in congenic mice homozygous for the B6 Msh3 gene on a CBy background, while the CAG tract was stabilized in congenics homozygous for the CBy Msh3 gene on a B6 background. The CAG stabilization was as dramatic as genetic deficiency of Msh2. The B6 and CBy Msh3 genes had identical promoters but differed in coding regions and showed strikingly different protein levels. B6 MSH3 variant protein is highly expressed and associated with CAG expansions, while the CBy MSH3 variant protein is expressed at barely detectable levels, associating with CAG stability. The DHFR protein, which is divergently transcribed from a promoter shared by the Msh3 gene, did not show varied levels between mouse strains. Thus, naturally occurring MSH3 protein polymorphisms are modifiers of CAG repeat instability, likely through variable MSH3 protein stability. Since evidence supports that somatic CAG instability is a modifier and predictor of disease, our data are consistent with the hypothesis that variable levels of CAG instability associated with polymorphisms of DNA repair genes may have prognostic implications for various repeat-associated diseases

Structural Characterization and Ligand/Inhibitor Identification Provide Functional Insights into the Mycobacterium tuberculosis Cytochrome P450 CYP126A1

The Mycobacterium tuberculosis H37Rv genome encodes 20 cytochromes P450, including P450s crucial to infection and bacterial viability. Many M. tuberculosis P450s remain uncharacterized, suggesting that their further analysis may provide new insights into M. tuberculosis metabolic processes and new targets for drug discovery. CYP126A1 is representative of a P450 family widely distributed in mycobacteria and other bacteria. Here we explore the biochemical and structural properties of CYP126A1, including its interactions with new chemical ligands. A survey of azole antifungal drugs showed that CYP126A1 is inhibited strongly by azoles containing an imidazole ring but not by those tested containing a triazole ring. To further explore the molecular preferences of CYP126A1 and search for probes of enzyme function, we conducted a high throughput screen. Compounds containing three or more ring structures dominated the screening hits, including nitroaromatic compounds that induce substrate-like shifts in the heme spectrum of CYP126A1. Spectroelectrochemical measurements revealed a 155-mV increase in heme iron potential when bound to one of the newly identified nitroaromatic drugs. CYP126A1 dimers were observed in crystal structures of ligand-free CYP126A1 and for CYP126A1 bound to compounds discovered in the screen. However, ketoconazole binds in an orientation that disrupts the BC-loop regions at the P450 dimer interface and results in a CYP126A1 monomeric crystal form. Structural data also reveal that nitroaromatic ligands "moonlight" as substrates by displacing the CYP126A1 distal water but inhibit enzyme activity. The relatively polar active site of CYP126A1 distinguishes it from its most closely related sterol-binding P450s in M. tuberculosis, suggesting that further investigations will reveal its diverse substrate selectivity.This work was supported by Biotechnology and Biological Research Council (BBSRC) Grants BB/I019227/1 (to A. W. M.) and BB/I019669/1 (to C. A.) underpinning this research program and supporting the research of A. J. C. and K. J. M

An experimental study exploring the impact of vignette gender on the quality of university students’ mental health first aid for peers with symptoms of depression

Background University students have high rates of depression, and friends are often the most commonly-used source of support for emotional distress in this population. This study aimed to explore students’ ability to provide effective support for their peers with depressive symptoms and the factors influencing the quality of their mental health first aid (MHFA) skills, including students’ gender, course of study, and gender of student experiencing depression. Methods Via an online survey, students at two British universities (N = 483) were quasi-randomly allocated to view a video vignette of either a male or female student depicting symptoms of depression. An open-ended question probed MHFA actions they would take to help the vignette character, which were rated using a standardised scoring scheme based on MHFA guidelines. Results Students reported low MHFA scores (mean 2.89, out of possible 12). The most commonly reported action was provision of support and information, but only eight (1.6 %) students stated an intention to assess risk of harm. Those studying clinically non-relevant degrees with limited mental health content reported poorer MHFA (p = <0.001) and were less confident about their ability to support a friend with depression (p = 0.04). There was no main effect of vignette gender, but within the group of students on non-relevant courses the male vignette received significantly poorer MHFA than the female vignette (p = 0.02). A significant three-way interaction found that male participants studying non-relevant degrees who viewed a male vignette had poorer MHFA compared to females studying non-relevant degrees who viewed the female vignette (p = 0.005). Conclusions Most students lack the necessary MHFA skills to support friends suffering from symptoms of depression, or to help them get appropriate support and prevent risk of harm. Students on courses which do not include mental health related content are particularly ill-equipped to support male students, with male students receiving the poorest quality MHFA from fellow male students on these courses. MHFA training has the potential to improve outcomes for students with depression, and could have a valuable role in reducing the excess risk of harm seen in male students

Racism as a determinant of health: a systematic review and meta-analysis

Despite a growing body of epidemiological evidence in recent years documenting the health impacts of racism, the cumulative evidence base has yet to be synthesized in a comprehensive meta-analysis focused specifically on racism as a determinant of health. This meta-analysis reviewed the literature focusing on the relationship between reported racism and mental and physical health outcomes. Data from 293 studies reported in 333 articles published between 1983 and 2013, and conducted predominately in the U.S., were analysed using random effects models and mean weighted effect sizes. Racism was associated with poorer mental health (negative mental health: r = -.23, 95% CI [-.24,-.21], k = 227; positive mental health: r = -.13, 95% CI [-.16,-.10], k = 113), including depression, anxiety, psychological stress and various other outcomes. Racism was also associated with poorer general health (r = -.13 (95% CI [-.18,-.09], k = 30), and poorer physical health (r = -.09, 95% CI [-.12,-.06], k = 50). Moderation effects were found for some outcomes with regard to study and exposure characteristics. Effect sizes of racism on mental health were stronger in cross-sectional compared with longitudinal data and in non-representative samples compared with representative samples. Age, sex, birthplace and education level did not moderate the effects of racism on health. Ethnicity significantly moderated the effect of racism on negative mental health and physical health: the association between racism and negative mental health was significantly stronger for Asian American and Latino(a) American participants compared with African American participants, and the association between racism and physical health was significantly stronger for Latino(a) American participants compared with African American participants.<br /

Anisotropic nanomaterials: structure, growth, assembly, and functions

Comprehensive knowledge over the shape of nanomaterials is a critical factor in designing devices with desired functions. Due to this reason, systematic efforts have been made to synthesize materials of diverse shape in the nanoscale regime. Anisotropic nanomaterials are a class of materials in which their properties are direction-dependent and more than one structural parameter is needed to describe them. Their unique and fine-tuned physical and chemical properties make them ideal candidates for devising new applications. In addition, the assembly of ordered one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) arrays of anisotropic nanoparticles brings novel properties into the resulting system, which would be entirely different from the properties of individual nanoparticles. This review presents an overview of current research in the area of anisotropic nanomaterials in general and noble metal nanoparticles in particular. We begin with an introduction to the advancements in this area followed by general aspects of the growth of anisotropic nanoparticles. Then we describe several important synthetic protocols for making anisotropic nanomaterials, followed by a summary of their assemblies, and conclude with major applications