24 research outputs found
Increased dissolution rates of tranilast solid dispersions extruded with inorganic excipients
The purpose of this study was to evaluate the performance of Neusilin® (NEU) a synthetic magnesium aluminometasilicate as inorganic drug carrier co-processed with the hydrophilic surfactants Labrasol and Labrafil to develop Tranilast (TLT) based solid dispersions using continuous melt extrusion (HME) processing. Twin – screw extrusion was optimized to develop various TLT/excipient/surfactant formulations followed by continuous capsule filling in the absence of any downstream equipment. Physicochemical characterisation showed the existence of TLT in partially crystalline state in the porous network of inorganic NEU for all extruded formulations. Furthermore, the in line NIR studies revealed a possible intermolecular H–bonding formation between the drug and carrier resulting in the increase of dissolution of TLT. The capsules containing TLT extruded solid dispersions showed enhanced dissolution rates and compared with the marketed Rizaben® product
Bronchopulmonary dysplasia with focus on early prediction and treatment: a narrative review
Background and Objective: Bronchopulmonary dysplasia (BPD) remains a major cause of morbidity and mortality in very preterm infants though early non-invasive ventilation and surfactant treatment and other neonatal therapies have improved the outcome. Therefore, it is necessary to find effective supplemental methods for prediction of BPD. Better understanding of the etiology and molecular mechanisms involved in the pathogenesis of BPD is necessary for development of new effective early treatments. It is generally accepted that BPD is a multifactorial disease often associated with intrauterine infections and placental perfusion disorders. Methods: Recently a new method to predict BPD at birth using artificial intelligence (AI) has been developed. This new method improves the likelihood of developing effective early treatments for BPD. The method combines information on early surfactant treatment, birth weight and gestational age (GA) with analysis of the mid-infrared spectrum of the molecules in gastric aspirate which are produced in the newborn’s lungs. The described methods for early treatment of BPD in this review among others covers inositol, retinol, super oxide dismutase, Clara cell 10 protein, corticosteroids, azithromycin, macrolide and stem cell therapy besides general treatments as nasal continuous positive airway pressure (NCPAP), surfactant, caffeine, oxygen saturation targeting and nutrition. The literature search was performed systemically online via the databases PubMed and Medline between January 1, 2011 and December 31, 2022. Key Content and Findings: A method to predict BPD immediately after birth is now available allowing possibility to develop effective early treatments of BPD. Conclusions: The present review focuses on early prediction and the existing pharmacologic interventions highlighting the potential to improve the outcome of infants with BPD
Jet dispensing of multi-layered films for the co-delivery of three antihypertensive agents
Three-layer thin films comprising of two polymers as substrate (ethyl cellulose and, copovidone K28) and three antihypertensive agents (hydrochlorothiazide, amiloride HCl, and carvedilol) were printed using jet dispensing technology. Two film formulations with different ethyl cellulose to copovidone K28 ratio (i.e., 90/10 and 50/50 w/w) were prepared using a three-course dispensing. The films were characterized regarding surface morphology, solid-state properties, polymer-drug interactions, drug distribution in each layer, and in vitro drug release. All the components of the films were found to be in the amorphous state apart from hydrochlorothiazide which retained its crystallinity. FT-IR spectroscopy revealed hydrogen bond interactions between carvedilol and copovidone K28. Combinations of ethyl cellulose and copovidone K28 provide suitable polymeric film substrates with the ability to modify drug release. Particularly, decreased ethyl cellulose to copovidone K28 weight ratio was found to suppress the crystallization of hydrochlorothiazide and to increase the release rate of the dispensed drugs. Jet dispensing was found to be a rapid technology for the preparation of multi-layered films that can be used as personalized formulations for the delivery of combinations of drugs
Combination of (M)DSC and surface analysis to study the phase behaviour and drug distribution of ternary solid dispersions
Purpose: Miscibility of the different compounds that make up a solid dispersion based formulation play a crucial role in the drug release profile and physical stability of the solid dispersion as it defines the phase behaviour of the dispersion. The standard technique to obtain information on phase behaviour of a sample is (modulated) differential scanning calorimetry ((M)DSC). However, for ternary mixtures (M)DSC alone is not sufficient to characterize their phase behaviour and to gain insight into the distribution of the active pharmaceutical ingredient (API) in a two-phased polymeric matrix.
Methods: MDSC was combined with complementary surface analysis techniques, specifically time-of-flight secondary ion mass spectrometry (ToF-SIMS) and atomic force microscopy (AFM). Three spray-dried model formulations with varying API/PLGA/PVP ratios were analyzed.
Results: The distribution of the API in the ternary solid dispersions depended on formulation parameters. The extent of API surface coverage and therefore the distribution of the API over both polymeric phases differed significantly for the three formulations.
Conclusions: Combining (M)DSC and surface analysis rendered additional insights in the composition of mixed phases in complex systems, like ternary solid dispersions
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such as extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet to be fully explored.
This paper presents various 3D printing technologies such as stereolithographic, powder based, selective laser sintering, fused deposition modelling and semi-solid extrusion 3D printing. It also provides a comprehensive review of previous attempts at using 3D printing technologies on the manufacturing dosage forms with a particular focus on oral tablets. Their advantages particularly with adaptability in the pharmaceutical field have been highlighted, including design flexibility and control and manufacture which enables the preparation of dosage forms with complex designs and geometries, multiple actives and tailored release profiles. An insight into the technical challenges facing the different 3D printing technologies such as the formulation and processing parameters is provided. Light is also shed on the different regulatory challenges that need to be overcome for 3D printing to fulfil its real potential in the pharmaceutical industry
Recommended from our members
The use of chemometrics in extracting information from Raman data
Raman spectroscopy has been established as one of the standard techniques for the investigation of physicochemical characteristics of pharmaceuticals, while chemometrics has become the standard processing technique of Raman data, enabling Raman to widen the range of its applications. Chemometrics is a group of tools, derived from statistics, which combine multivariate data analytical methods. The use of chemometrics allows the characterisation of complex systems as it offers the possibility to simultaneously analyse huge data sets. When multivariate data analysis is used, the whole spectrum is taken into account rather than just a single band (univariate data analysis). Therefore, all the changes in the spectrum across the sample can be identified. This article demonstrates some of the most common chemometrics algorithms that are available and how the preprocessed raw data can help to extract information
Ultrahigh nanostructured drug payloads from degradable mesoporous silicon aerocrystals
Porous silicon has found increased attention as a drug delivery system due to its unique features such as high drug payloads, surface area and biodegradation. In this study supercritical fluid (SCF) assisted drying of ultrahigh porosity (> 90%) silicon particles and flakes was shown to result in much higher mesopore volumes (~ 4.66 cm3/g) and surface areas (~ 680 m2/g) than with air-drying. The loading and physical state of the model drug (S)-(+)-Ibuprofen in SCF dried matrices was quantified and assessed using thermogravimetric analysis, differential scanning calorimetry, UV-Vis spectrophotometry, gravimetric analysis, gas adsorption and electron microscopy. Internal drug payloads of up to 72% were achieved which was substantially higher than values published for both conventionally dried porous silicon (17-51%) and other mesoporous materials (7-45%). In-vitro degradability kinetics of SCF-dried matrices in simulated media was also found to be faster than air-dried controls. The in-vitro release studies provided improved but sustained drug dissolution at both pH 2.0 and pH 7.4
Recommended from our members
3D printed microneedles for anticancer therapy of skin tumours
In this study, novel 3D printed polymeric microneedle arrays were fabricated for enhanced cisplatin delivery to A-431 epidermoid skin tumours for cancer treatment. The microneedles were built by selectively photopolymerising consecutive layers of a biocompatible photopolymer resin using stereolithography (SLA), followed by coating of cisplatin formulations using inkjet dispensing on the needle surface. The printability via SLA was optimized to improve microneedle mechanical properties and optical coherence tomography analysis showed excellent piercing capacity of 3D printed microneedles to an 80% penetration depth. Franz cell diffusion studies revealed rapid cisplatin release rates of 80–90% within 1 h and in vivo evaluation with Balb/c nude mice presented sufficient cisplatin permeabilization with high anticancer activity and tumour regression. Histopathology analysis confirmed the tumour inhibition effect, showing demarcated lesions with thin fibrous capsules and necrotic cores. The use of 3D printed microneedles demonstrates the potential for in-vivo transdermal delivery of anticancer drugs
One-step continuous extrusion process for the manufacturing of solid dispersions
The purpose of this study was to evaluate the performance of synthetic magnesium aluminometasilicate (MAS) as a novel inorganic carrier in hot melt extrusion (HME) processing of indomethacin (IND) for the development of solid dispersions. A continuous extrusion process at various IND/excipient blend ratios (20%, 30% and 40%) was performed using a twin-screw extruder. Physicochemical characterization carried out by SEM, DSC, and XRPD demonstrated the presence of IND in amorphous nature within the porous network of the inorganic material for all extruded formulations. Further, AFM and FTIR studies revealed a single-phase amorphous system and intermolecular H-bonding formation. The IND/MAS extrudates showed enhanced INM dissolution rates within 100% been released within 1 h. Stability studies under accelerated conditions (40 °C, RH 75%) showed that MAS retained the physical stability of the amorphous solid dispersions even at high drug loadings for 12 months