130 research outputs found

    Parametric variational analysis of compliant sheet metal assemblies with shell elements

    Get PDF
    One of most demanding tasks in the manufacturing field is controlling the variability of parts as it may affect strongly the deliverability of key characteristics defined at the final (product) assembly level. Current CAT systems offer a good solution to the tolerance analysis/synthesis task, but to handle flexible objects with shape errors more effort is needed to include methods able to capture the elastic behaviour of parts that adds more variability on the final assembly. Usually, sheet metal assemblies require dedicated fixtures and clamps layout to control the gap between parts in the specific location where a join must be placed. Due to the variability of parts the position of clamps can also be varied. The paper describes a FEM-based method able take into account part flexibility and shape error to parametrically analyse sheet metal assemblies by acting on some key parameters to look for the optimal clamp layout that guarantee the gap between parts to be under control after joining parts together. This method offers, with respect to commercial solutions, the ability to model fixtures, clamps and different joint types with no matter on the mesh nodes’ position. Locations of such elements are based on the shape functions defined at element (shell) mesh level and modelled as local constraints. So the user can generate a mesh without a previous knowledge of the exact positions of clamps, for example. This allows to conduit a faster parametric analysis without remeshing the surfaces and with no need to physically model the clamps. An aeronautic case study is described with a four-part assembly riveted on a quite complex fixture by using several clamps

    Fixture capability optimisation for early-stage design of assembly system with compliant parts using nested polynomial chaos expansion

    Get PDF
    AbstractThis paper introduces the novel concept of fixture capability measure to determine fixture layout for the best assembly process yield by optimizing position of locators and reference clamps to compensate stochastic product variations and part deformation. This allows reducing the risk of product failures caused by product and process variation. The method is based on three main steps: (i) physics-based modelling of parts and fixtures, (ii) stochastic polynomial chaos expansion to calculate fixture capability, and (iii) fixture capability optimisation using surrogate modelling. The methodology is demonstrated and validated using the results of an aerospace wing sub-assembly joined by riveting technique

    On BIM Interoperability via the IFC Standard: An Assessment from the Structural Engineering and Design Viewpoint

    Get PDF
    Building information modelling (BIM) plays a prominent role in a good deal of architecture, engineering and construction (AEC) works, envisaging a full transition to digitalization for the construction industry. This is also due to a number of national and international regulations regarding the design, erection, and management of civil engineering constructions. For this reason, full interoperability of software environments such as computer-aided design (CAD) and computer-aided engineering (CAE) is a necessary requirement, particularly when the exchange of information comes from different disciplines. Users, throughout the years, have faced CAD–CAE interoperability issues despite following the IFC neutral open file format. This inability to share data (CAD to CAD, CAD to CAE) often generates model-interpretation problems as well as a lack of parametric information and a disconnection of elements. This paper addresses issues and mapping mechanisms in the exchange of data for the purpose of defining a baseline for the current status of bidirectional data exchange between AEC CAD/CAE software via the IFC format. A benchmark study, covering three years of software releases is illustrated; the assessment of the software performance was made with reference to criteria associated with the software’s level of suitability for use of the structural models. Four classes of performance, depending on the accuracy of the data transfer and on the associated corrective actions to be taken, were adopted. This confirmed that at the moment, the implementation of the IFC standard by software manufacturers is geared towards an expert class of users. Further efforts are needed in order to ensure its application is adopted by a wider class, thus extending and regulating its use by national, regional, and local authorities

    A graph-based method and a software tool for interactive tolerance specification

    Get PDF
    Abstract The paper deals with the problem of tolerance specification and, in particular, proposes a graph-based method and a preliminary software tool: (i) to accomplish the tolerance specification for a mechanical assembly; (ii) to verify the consistency of the specification and, (iii) to allow the tracing of relationships among parts and features of the assembly. The method adopts Minimum Reference Geometric Elements (MRGE), directed graphs (di-graphs) and a set of dedicated algorithms to tackle the problems of consistency that occur during an interactive tolerance specification activity. Finally, an application illustrates the proposed method and its actual implementation

    Parametric effect analysis of free-form shape error during sheet metal forming

    Get PDF
    Compliant sheet metal parts or free-form shaped parts are widely used for automotive bodies, aerospace fuselage/wing or home appliances. Intrinsic flexibility of sheet metal along with forming process variability throws a number of challenges to produce geometrically conforming parts. Additionally, emerging optical non-contact metrology scanners offer to capture entire part geometric quality information which enables virtual design and manufacturing at early stage. This paper focuses on developing a generic functional data analysis based approach to quantify geometric error/shape error which are generated by process or material parameters (such as material thickness, stamping speed and blank holding force) during sheet metal forming process. The research methodology involves: (i) experimental investigation by varying the design parameters; (ii) capturing entire surface based shape error information (i.e. high density cloud-of-points, CoPs) by using optical scanner; (iii) functional mapping of shape error to design parameters (responsible to generate the data) by using deviation field decomposition approach; and (iv) parametric analysis of process parameters by developing analytical surrogate model. The proposed approach concentrates on finding root causes of failure, usually unforeseen if only based on heuristic approaches. The applicability and effectiveness of the proposed methodology have been illustrated with industrial case study

    A sensor data fusion-based locating method for large-scale metrology

    Get PDF
    The measurement of geometric and dimensional variations in the context of large-sized products is a complex operation. One of the most efficient ways to identify deviations is by comparing the nominal object with a digitalisation of the real object through a reverse engineering process. The accurate digitalisation of large geometric models usually requires multiple acquisitions from different acquiring locations; the acquired point clouds must then be correctly aligned in the 3D digital environment. The identification of the exact scanning location is crucial to correctly realign point clouds and generate an accurate 3D CAD model. To achieve this, an acquisition method based on the use of a handling device is proposed that enhances reverse engineering scanning systems and is able to self-locate. The present paper tackles the device’s locating problem by using sensor data fusion based on a Kalman filter. The method was firstsimulated in a MatLAB environment; a prototype was then designed and developed using low-cost hardware. Tests on the sensor data fusion have shown a locating accuracy better than that of each individual sensor. Despite the low-cost hardware, the results are encouraging and open to future improvements

    Combining Integrated Informative System and Historical Digital Twin for Maintenance and Preservation of Artistic Assets

    Get PDF
    The protection of artistic and cultural heritage is a major challenge due to its peculiarities and its exposure to significant natural hazards. Several methodologies exist to assess the condition of artistic heritage and to protect it from exceptional actions. Moreover, novel digital technologies offer many solutions able to deliver a digital replica of artifacts of interest, so that a reduction in the uncertainties in the analysis models can be achieved. A rational approach to the preservation and protection of artistic heritage is based on traditional approaches supported and integrated by novel technologies, so that qualitative and quantitative indicators of the current condition of artistic heritage can be defined and validated in an interdisciplinary framework. The present paper reports the results of an approach to the maintenance and preservation of art objects housed in a museum complex based on a comprehensive digital path towards a Historical Digital Twin (HDT). A workflow aimed at estimating the stress regime and the dynamic properties of two sculptures, based on the detailed three-dimensional model resulting from a laser scanner survey, is illustrated and discussed. The results highlight the great advantages resulting from the integration of traditional and novel procedures in the field of conservation of artistic assets

    Digital Twin for Monitoring Ergonomics during Manufacturing Production

    Get PDF
    Within the era of smart factories, concerning the ergonomics related to production processes, the Digital Twin (DT) is the key to set up novel models for monitoring the performance of manual work activities, which are able to provide results in near real time and to support the decision-making process for improving the working conditions. This paper aims to propose a methodological framework that, by implementing a human DT, and supports the monitoring and the decision making regarding the ergonomics performances of manual production lines. A case study, carried out in a laboratory, is presented for demonstrating the applicability and the effectiveness of the proposed framework. The results show how it is possible to identify the operational issues of a manual workstation and how it is possible to propose and test improving solutions

    A novel hybrid shell element formulation (QUAD+ and TRIA+) : a benchmarking and comparative study

    Get PDF
    This paper introduces a novel hybrid finite element (FE) formulation of shell element to enable assembly process simulation of compliant sheet-metal parts with higher efficiency and flexibility. Efficiency was achieved by developing both new hybrid quadrilateral and triangular elements. Quadrilateral element (QUAD+) was formulated by combining area geometric quadrilateral 6 (AGQ6) nodes and mixed interpolated tensorial components (MITC) to model membrane and bending/shear component respectively. Triangular element (TRIA+) was formulated by merging assumed natural deviatoric strain (ANDES) for membrane and MITC for bending/shear component. Flexibility was addressed by developing an open-source C++ code, enhanced by the OpenMP interface for multiprocessing programming. Tests and benchmarks were compiled and executed within Matlab using the MEX API interface. Extensive benchmark studies were accomplished to evaluate the performance of the proposed hybrid formulation and the shell formulations used in three FEM packages - ABAQUS, ANSYS and COMSOL- under static linear elastic condition with small strain assumption. It was observed that the proposed QUAD+ and TRIA+ elements performed better amongst the FE packages, especially when there was in-plane mesh distortion, with errors below 3%. It was also identified that the best efficiency is obtained by adopting dominant QUAD+ elements compared to the TRIA+ when working on complex geometries. This paper also contributes to present a wide set of benchmark studies required to verify new release of FE packages using shell element or evaluate the performance of new shell formulations

    Prediction of geometric errors of stamped sheet metal parts using deviation field decomposition

    Get PDF
    Stamping process is widely used to fabricate sheet-metal components. Due to the intrinsic nature of sheet-metal parts, it is usually difficult to control the quality of the final shape, surface defects or geometric errors. Additionally, to meet tight GD&T specifications, a proactive prediction technique is required to estimate global/local geometric defects caused by manufacturing steps. Current best practice relies on manual trial-and-error approaches which are far to be optimal and are costly and time consuming. This paper proposes a model-driven methodology to forecast geometric errors for given set of process parameters (forward process), and consequently optimise (feedback process) the process parameters to achieve given quality standards. The methodology is based on: (i) experimental investigation with varying process parameters and subsequently, deviation field extraction by mapping high density Cloud-of-Points with nominal CAD model; (ii) deviation field decomposition; (iii) surrogate model development by mapping decomposed deviation field to process parameters. An industrial case study is used to validate the methodology
    • …
    corecore