21 research outputs found
Prediction of the load carrying capacity of elevated steel fibre reinforced concrete slabs
A novel methodology is developed for predicting the load carrying capacity of elevated
steel fibre reinforced concrete (E-SFRC) slab systems. In the proposed approach the
depth of slab’s cross section is discretized into several layers, and the number of steel
fibres per each layer is determined by considering the distribution of fibres along the
depth of cross section. This information, together with the one obtained from the threepoint
notched beam bending tests performed on four series of SFRC made of different
concrete strength class and content of fibres, have provided the stress-crack width laws
for defining the post-cracking behaviour of each layer. These constitutive laws are
implemented in a numerical model developed based on the moment-rotation approach
for determining the positive and negative resisting bending moment of the slab’s unit
width cross section. By using the yield line theory, the load carrying capacity of ESFRC
slab is predicted for the most current load conditions. Predictive performance of
the proposed methodology is assessed comparing to the results recorded in experiment
and the ones obtained by the numerical simulation. Finally the developed model is
utilised in a parametric study to evaluate the influence of parameters that affect the
load-carrying capacity of E-SFRC slabs.This work is supported by FEDER funds through the Operational Program for Competitiveness Factors - COMPETE and National Funds through FCT - Portuguese
Foundation for Science and Technology under the project “SlabSys – HFRC – Flat slabs for multi-storey buildings using hybrid reinforced self-compacting concrete: an innovative structural system” PTDC/ECM/120394/2010. The first author also acknowledges the financial supports provided by Seismic Geotechnical and High Performance Concrete Research Centre of Semnan Branch, Islamic Azad University.info:eu-repo/semantics/publishedVersio
Assessment of the performance of steel fibre reinforced self-compacting concrete in elevated slabs
The reinforcement mechanisms at the cross section level assured by fibres bridging the cracks in steel fibre reinforced self-compacting concrete (SFRSCC) can be significantly amplified at structural level when the SFRSCC is applied in structures with high support redundancy, such is the case of elevated slab systems. To evaluate the potentialities of SFRSCC as the fundamental material of elevated slab systems, a ¼ scale SFRSCC prototype of a residential building was designed, built and tested. The extensive experimental program includes material tests for characterizing the relevant properties of SFRSCC, as well as structural tests for assessing the performance of the prototype at serviceability and ultimate limit conditions. Three distinct approaches where adopted to derive the constitutive laws of the SFRSCC in tension that were used in finite element material nonlinear analysis to evaluate the reliability of these approaches in the prediction of the load carrying capacity of the prototype.The study reported in this paper is part of PhD thesis supported by FCT. The first author acknowledges FCT for
Grant SFRH/BD/71934/2010. The authors wish to acknowledge inclusive supports provided by Casais
Company in this research program for construction of the prototype and for technical supports during the test.
The authors also wish to acknowledge CiviTest Company for its collaboration and supports in designing and
casting the SFRSCC
Evaluation of the influence of post-cracking response of steel fibre reinforced concrete (SFRC) on load carrying capacity of SFRC panels
To develop a reliable methodology for the design of steel fibre reinforced concrete (SFRC) slabs, an extensive experimental program was carried out with SFRC square panels simply supported in their contour. By adopting a moment-rotation approach, a numerical model was developed capable of taking into account the constitutive laws of the SFRC for the prediction of the force-deflection response of variety of panel tests recommended in the international standards. The predictive performance of the model was assessed by considering results available in the bibliography and those obtained on the experimental program. The proposed model was utilized in a parametric study to assess the influence of toughness classes of SFRC on the behaviour at serviceability limit conditions, on the load carrying capacity, and on the deformational response of SFRC round panels.This work is supported by the FEDER funds through the Operational Program for Competitiveness Factors -
COMPETE and National Funds through FCT - Portuguese Foundation for Science and Technology under the project
SlabSys-HFRC-PTDC/ECM/120394/2010. The first author acknowledges the FCT PhD Grant
SFRH/BD/71934/2010. The authors would like to acknowledge the materials supplied by Maccaferri (fibres),
SECIL (cement), SIKA and BASF (superplasticizers), OmyaComital (limestone filler), and Pegop (Fly ash). Special
thanks for CiviTest Company that developed the SFRCs and executed the specimens of the experimental program.Fundação para a Ciência e a Tecnologia (FCT
A design model for strain-softening and strain-hardening fiber reinforced elements reinforced longitudinally with steel and FRP bars
A close form solution is developed for the prediction of the moment-curvature relationship of cross sections of fiber
reinforced concrete (FRC) elements failing in bending, and reinforced longitudinally with steel and fiber reinforced
polymer (FRP) bars. The FRP bars are installed with the largest possible internal arm, e.g. with the minimum concrete
cover that assures the bond conditions for a sound stress transfer from FRC to the FRP bars. The model is also able of
simulating the flexural strengthening contribution provided by FRP bars installed according to the Near Surface Mounted
(NSM) technique. To have good protection conditions against corrosion, the steel bars are applied with a relatively thick
FRC cover. Since steel stirrups are the reinforcement with the smaller concrete cover thickness, they are the most
susceptible to corrosion. In the reinforcement concept to be developed in the present research program, steel stirrups are
replaced with discrete fibers. This hybrid reinforcement aims to develop high durable pre-fabricated elements that fail in
bending. The proposed analytical formulation can simulate FRC with strain softening or strain hardening behavior. In the
present work, the formulation is described and its predictive performance is appraised.The study reported in this paper is part of the research programs "DURCOST", PTDC/ECM/105700/2008, supported by FCT, and "PONTALUMIS", QREN, Project No. 3456. The first and third authors wish to acknowledge the support provided by project PONTALUMIS, while the second author acknowledges the support of DURCOST
A model to simulate the moment-rotation and crack width of FRC members reinforced with longitudinal bars
The present work describes a model for the determination of the moment–rotation relationship of a cross section of fiber reinforced concrete (FRC) elements that also include longitudinal bars for the flexural reinforcement (R/FRC). Since a stress–crack width relationship (σ–w)(σ–w) is used to model the post-cracking behavior of a FRC, the σ–w directly obtained from tensile tests, or derived from inverse analysis applied to the results obtained in three-point notched beam bending tests, can be adopted in this approach. For a more realistic assessment of the crack opening, a bond stress versus slip relationship is assumed to simulate the bond between longitudinal bars and surrounding FRC. To simulate the compression behavior of the FRC, a shear friction model is adopted based on the physical interpretation of the post-peak compression softening behavior registered in experimental tests. By allowing the formation of a compressive FRC wedge delimited by shear band zones, the concept of concrete crushing failure mode in beams failing in bending is reinterpreted. By using the moment–rotation relationship, an algorithm was developed to determine the force–deflection response of statically determinate R/FRC elements. The model is described in detail and its good predictive performance is demonstrated by using available experimental data. Parametric studies were executed to evidence the influence of relevant parameters of the model on the serviceability and ultimate design conditions of R/FRC elements failing in bending.This work is supported by FEDER funds through the Operational Programme for
Competitiveness Factors – COMPETE and National Funds through FCT – Portuguese Foundation for Science and Technology under the project PTDC/ECM/105700/2008 –
“DURCOST - Innovation in reinforcing systems for sustainable pre-fabricated structures of higher durability and enhanced structural performance”. The second and third author wish to acknowledge the grant provided by this project and FCT (SFRH/BD/71934/2010), respectively
A design-based approach to estimate the moment-curvature relationship of fiber reinforced elements failing in bending
Relatório A0.T0.UM.
A design model for fibre reinforced concrete bending elements with longitudinal pre-stressed steel and FRP bars
A close form solution to calculate the moment-curvature and load-deflection response of
strain-softening and strain-hardening fibre reinforced concrete (FRC) elements failing in bending and
reinforced longitudinally with pre-stressed steel and fibre reinforce polymer (FRP) bars is presented.
This hybrid reinforcement is used for the development of high durable pre-fabricated and cost
competitive beams. Pre-stressed FRP bars are applied with the minimum concrete cover, in order to
take into account the benefits derived from the relatively high tensile strength of these bars and their
immunity to corrosion. Pre-stressed steel bars, with a larger concrete cover have the purpose of
providing the necessary ductility and assure the resistance of the beam in case of a fire occurrence.
To replace completely the steel stirrups, a high performance fibre reinforced concrete is used. The
predictive performance of the model is assessed by taking advantage of FEMIX, a FEM-based
computer program. The model is finally utilized in a parametric study in order to evaluate the impact of
post-cracking performance of FRC and applied pre-stress percentage on structural performance of
FRC beams
Integrated approach for the prediction of crack width and spacing in flexural FRC members with hybrid reinforcement
In this paper, a new model is developed based on the moment-rotation approach to predict average crack width and average crack spacing of flexural elements made of fibre reinforced concrete (FRC) that also include longitudinal steel and/or fibre reinforced polymer (FRP) bars. The post-cracking behaviour of FRC is simulated by a stress-crack width relationship, while the interaction between concrete and longitudinal reinforcement is modelled by a multilinear shear stress-sliding diagram based on experimental evidence. For assessing the predictive performance of the developed model, an experimental program was executed with this type of structural elements, where the moment versus average crack width and crack spacing were recorded. The good predictive performance of the model was also demonstrated by using experimental results available in the literature. The predictive performance was, in general, better than the predictions from RILEM TC 162-TDF and fib Model Code 2010project ICOSytec, project number 027990, Announcement 02/SAICT/2017, financed by FCT (Protuguese Foundation for Science and Technology) and co-funded by FEDER through Operational Competitiveness and Internationalization Programme (POCI
Design-oriented approach for strain-softening and strain-hardening fibre hybrid reinforced concrete elements failing in bending
In the present paper a design oriented model is proposed to evaluate the flexural
resistance of elements of fibre reinforced concrete (FRC) of tensile strain-softening or
tensile strain-hardening behaviour and strengthened longitudinally by steel bars in the
tensile zone of a rectangular cross section. The cross sectional moment-curvature response
predicted by this model is used in a numerical approach to predict the load-deflection
relationship of beams failing in bending. To appraise the predictive performance of this
approach, the results obtained in an experimental program with shallow beams of steel
fibre reinforced self-compacting concrete and strengthened with distinct reinforcement
ratios are compared to those estimated by the developed model. The predictive
performance of the model is quite satisfactory, taking into account the simplified
approaches adopted in order to have a closed form solution that can be used in the scope
of design FRC elements failing in bending.Quadro de Referência Estratégico Nacional (QREN) - 345
Betão auto-compactável reforçado com fibras de aço no desenvolvimento de novos sistemas estruturais
O betão auto-compactável reforçado com fibras de aço (BACRFA) é um material compósito que integra os benefícios associados ao betão auto-compactável (BAC) com os derivados do reforço proporcionado por fibras discretas de aço (BRFA). O BACRFA pode ser utilizado em diversas aplicações estruturais com vantagens económicas e técnicas. No presente trabalho são discutidos os aspetos relevantes da tecnologia de fabrico do BACRFA, principalmente os que influenciam a distribuição e orientação das fibras, dada a sua significativa influência na resistência pós-fendilhação deste material. São descritas as mais recentes recomendações para definição das leis constitutivas que caracterizam o comportamento pós-fendilhado do BACRFA, e a sua robustez é discutida tendo por base resultados obtidos em programas experimentais baseados em diferentes configurações de ensaio para caracterização do comportamento deste compósito. É explorada a utilização do BACRFA para a construção de lajes fungiformes apoiadas em pilares, juntamente com uma proposta de formulação baseada na teoria das linhas de rotura para estimar a capacidade de carga deste tipo de lajes.
Para avaliar o potencial do BACRFA em aplicações que exigem a consideração da interação solo-estrutura, como é o caso de grelhas de fundação de habitação unifamiliar, foi utilizado o método dos elementos finitos por intermédio de simulações não linear material.Fundação para a Ciência e a Tecnologia (FCT