Polymer brush collapse under shear flow

Shear responsive surfaces offer potential advances in a number of applications. Surface functionalisation using polymer brushes is one route to such properties, particularly in the case of entangled polymers. We report on neutron reflectometry measurements of polymer brushes in entangled polymer solutions performed under controlled shear, as well as coarse-grained computer simulations corresponding to these interfaces. Here we show a reversible and reproducible collapse of the brushes, increasing with the shear rate. Using two brushes of greatly different chain lengths and grafting densities, we demonstrate that the dynamics responsible for the structural change of the brush are governed by the free chains in solution rather than the brush itself, within the range of parameters examined. The phenomenon of the brush collapse could find applications in the tailoring of nanosensors, and as a way to dynamically control surface friction and adhesion

Tackling the Root Cause of Surface-Induced Coagulation: Inhibition of FXII Activation to Mitigate Coagulation Propagation and Prevent Clotting

Factor XII (FXII) is a zymogen present in blood that tends to adsorb onto the surfaces of blood-contacting medical devices. Once adsorbed, it becomes activated, initiating a cascade of enzymatic reactions that lead to surface-induced coagulation. This process is characterized by multiple redundancies, making it extremely challenging to prevent clot formation and preserve the properties of the surface. In this study, a novel modulatory coating system based on C1-esterase inhibitor (C1INH) functionalized polymer brushes, which effectively regulates the activation of FXII is proposed. Using surface plasmon resonance it is demonstrated that this coating system effectively repels blood plasma proteins, including FXII, while exhibiting high activity against activated FXII and plasma kallikrein under physiological conditions. This unique property enables the modulation of FXII activation without interfering with the overall hemostasis process. Furthermore, through dynamic Chandler loop studies, it is shown that this coating significantly improves the hemocompatibility of polymeric surfaces commonly used in medical devices. By addressing the root cause of contact activation, the synergistic interplay between the antifouling polymer brushes and the modulatory C1INH is expected to lay the foundation to enhance the hemocompatibility of medical device surfaces.© 2023 The Authors. Macromolecular Bioscience published by Wiley-VCH GmbH

Plasmonic Hepatitis B Biosensor for the Analysis of Clinical Saliva

A biosensor for the detection of hepatitis B antibodies in clinical saliva was developed. Compared to conventional analysis of blood serum, it offers the advantage of noninvasive collection of samples. Detection of biomarkers in saliva imposes two major challenges associated with the low analyte concentration and increased surface fouling. The detection of minute amounts of hepatitis B antibodies was performed by plasmonically amplified fluorescence sandwich immunoassay. To have access to specific detection, we prevented the nonspecific adsorption of biomolecules present in saliva by brushes of poly[(N-(2-hydroxypropyl) methacrylamide)-co-(carboxybetaine methacrylamide)] grafted from the gold sensor surface and post modified with hepatitis B surface antigen. Obtained results were validated against the response measured with ELISA at a certified laboratory using serum from the same patients. © 201

Plasmonic Hepatitis B Biosensor for the Analysis of Clinical Saliva

A biosensor for the detection of hepatitis B antibodies in clinical saliva was developed. Compared to conventional analysis of blood serum, it offers the advantage of noninvasive collection of samples. Detection of biomarkers in saliva imposes two major challenges associated with the low analyte concentration and increased surface fouling. The detection of minute amounts of hepatitis B antibodies was performed by plasmonically amplified fluorescence sandwich immunoassay. To have access to specific detection, we prevented the nonspecific adsorption of biomolecules present in saliva by brushes of poly[(N-(2-hydroxypropyl) methacrylamide)-co-(carboxybetaine methacrylamide)] grafted from the gold sensor surface and post modified with hepatitis B surface antigen. Obtained results were validated against the response measured with ELISA at a certified laboratory using serum from the same patients. © 201

Oriented immobilization of Pep19-2.5 on antifouling brushes suppresses the development of Staphylococcus aureus biofilms

Bacterial colonization of indwelling medical devices poses a danger to the patient and is a tremendous economic burden that costs billions of dollars to the healthcare system. Thus, it is essential to develop an effective mechanism that prevents the attachment of bacteria to the surface in combination with bactericidal strategies to kill them in direct contact. In this work, we combine the repellent/antifouling properties of polymer brushes with the antimicrobial activity of the synthetic peptide Pep19-2.5 and test its efficacy to inhibit Staphylococcus aureus biofilm formation. To tackle this, we utilized hierarchical polymer brushes, where the bottom block provides an effective barrier against adhesion while the top block provides functional groups for the immobilization of active molecules. Further, these polymer brushes were decorated with dibenzocyclooctine (DBCO)-functionalized Pep19-2.5 using strain-promoted alkyne-azide cycloaddition (SPAAC). This click chemistry proceeds very fast and does not require any catalyst, which is crucial for biomedical applications. The obtained coating was not only able to decrease the number of freely planktonic bacteria in the surrounding media (by 52.5%) but also inhibit the development of S. aureus biofilm by reducing the number of total, viable, and viable but non-culturable (VBNC) cells (up to 58%, 66%, and 70% respectively) and reduce the biovolume and thickness. Conversely, this coating does not exert any cytotoxic effect on Normal Human Dermal Fibroblasts (NHDF) cells. Thus, the combination of hierarchical polymer brushes with Pep19-2.5 is a promising approach to fight medical biofilms without affecting surrounding tissues

Controlled Surface Adhesion of Macrophages via Patterned Antifouling Polymer Brushes

Macrophages will play an important role in future diagnostics and immunotherapies of cancer. However, this demands to selectively capture and sort different subpopulations, which remains a challenge due to their innate ability to bind to a wide range of interfaces indiscriminately. The main obstacle here is the lack of interfaces combining sufficient antifouling properties with the display of specific binding sites allowing sorting and quantification. Herein, as a proof of principle means, it is introduced to pattern interfaces to locally and selective capture macrophages. The repellent coating is based on antifouling polymer brushes, which can be functionalized. Arrays of binding sites are constructed by microchannel cantilever spotting. Those structures are tested for the isolation of different macrophage subtypes, especially polarized anti‐inflammatory macrophages of the M2 type which can be found associated to tumors (“tumor associated macrophages”; TAMs). Using macrophages as a model system, it is demonstrated that the newly developed surfaces and patterns are efficient for specifically trapping targeted cells and can be useful for further development of therapeutic or diagnostic purposes in the future

A green solvent-to-polymer upgrading approach to water-soluble LCST poly(N-substituted lactamide acrylate)s

We report a green solvent-to-polymer upgrading transformation of chemicals of the lactic acid portfolio into water-soluble lower critical solution temperature (LCST)-type acrylic polymers. Aqueous Cu(0)-mediated living radical polymerization (SET-LRP) was utilized for the rapid synthesis of N-substituted lactamide-type homo and random acrylic copolymers under mild conditions. A particularly unique aspect of this work is that the water-soluble monomers and the SET-LRP initiator used to produce the corresponding polymers were synthesized from biorenewable and non-toxic solvents, namely natural ethyl lactate and BASF's Agnique® AMD 3L (N,N-dimethyl lactamide, DML). The pre-disproportionation of Cu(I)Br in the presence of tris[2-(dimethylamino)ethyl]amine (Me6TREN) in water generated nascent Cu(0) and Cu(II) complexes that facilitated the fast polymerization of N-tetrahydrofurfuryl lactamide and N,N-dimethyl lactamide acrylate monomers (THFLA and DMLA, respectively) up to near-quantitative conversion with excellent control over molecular weight (5000 < Mn < 83 000) and dispersity (1.05 < Đ < 1.16). Interestingly, poly(THFLA) showed a degree of polymerization and concentration dependent LCST behavior, which can be fine-tuned (Tcp = 12–62 °C) through random copolymerization with the more hydrophilic DMLA monomer. Finally, covalent cross-linking of these polymers resulted in a new family of thermo-responsive hydrogels with excellent biocompatibility and tunable swelling and LCST transition. These illustrate the versatility of these neoteric green polymers in the preparation of smart and biocompatible soft materials

A green solvent-to-polymer upgrading approach to water-soluble LCST poly(N-substituted lactamide acrylate)s

We report a green solvent-to-polymer upgrading transformation of chemicals of the lactic acid portfolio into water-soluble lower critical solution temperature (LCST)-type acrylic polymers. Aqueous Cu(0)-mediated living radical polymerization (SET-LRP) was utilized for the rapid synthesis of N-substituted lactamide-type homo and random acrylic copolymers under mild conditions. A particularly unique aspect of this work is that the water-soluble monomers and the SET-LRP initiator used to produce the corresponding polymers were synthesized from biorenewable and non-toxic solvents, namely natural ethyl lactate and BASF's Agnique (R) AMD 3L (N,N-dimethyl lactamide, DML). The pre-disproportionation of Cu(I) Br in the presence of tris[2-(dimethylamino)ethyl]amine (Me6TREN) in water generated nascent Cu(0) and Cu(II) complexes that facilitated the fast polymerization of N-tetrahydrofurfuryl lactamide and N,N-dimethyl lactamide acrylate monomers (THFLA and DMLA, respectively) up to near-quantitative conversion with excellent control over molecular weight (5000 < M-n < 83 000) and dispersity (1.05 < D < 1.16). Interestingly, poly(THFLA) showed a degree of polymerization and concentration dependent LCST behavior, which can be fine-tuned (T-cp = 12-62 degrees C) through random copolymerization with the more hydrophilic DMLA monomer. Finally, covalent cross-linking of these polymers resulted in a new family of thermo-responsive hydrogels with excellent biocompatibility and tunable swelling and LCST transition. These illustrate the versatility of these neoteric green polymers in the preparation of smart and biocompatible soft materials