Influence of Nb microaddition on microstructure and texture evolution in a Fe-21Mn-1.3Al-1.5Si-0.5C TWIP steel under uniaxial hot-tensile conditions

Advanced high-strength steels as Twinning Induced Plasticity (TWIP) steels have been developed using microalloying elements and subsequent thermo-mechanical processing techniques. Moreover, under hot-working conditions, these steels undergo significant microstructural changes as a result of preferred crystallographic orientation (texture) of grains. In order to evaluate this behavior, one non-microalloyed and other single Nb-microalloyed TWIP steels were melted in an induction furnace and cast into metal and sand molds. Samples with austenitic grain sizes between 400 and 2000 µm were deformed at 800 °C and strained at a constant strain rate of 10-3 s-1, and deformation state was examined by means of electron backscatter diffraction (EBSD) technique near to the fracture tip. It was found that non-microalloyed TWIP steel solidified in both metal and sand mold exhibits dynamically recrystallized grains. On the other hand, Nb microaddition has a strong influence in TWIP steel retarding the onset of recrystallization kinetics, showing low angle sub-structured grains. Furthermore, it was possible identifying the crystallographic orientation of grains using the inverse pole figures (IPF) and the orientation distribution function (ODF). Weak cube {001} recrystallization and E{111} ¿-fiber deformation textures components were detected.Peer ReviewedPostprint (author's final draft

A study of tensile and bending properties of 3D-printed biocompatible materials used in dental appliances

In the last years, a large number of new biocompatible materials for 3D printers have emerged. Due to their recent appearance and rapid growth, there is little information about their mechanical properties. The design and manufacturing of oral appliances made with 3D printing technologies require knowledge of the mechanical properties of the biocompatible material used to achieve optimal performance for each application. This paper focuses on analyzing the mechanical behaviour of a wide range of biocompatible materials using different additive manufacturing technologies. To this end, tensile and bending tests on different types of recent biocompatible materials used with 3D printers were conducted to evaluate the influence of the material, 3D printing technology, and printing orientation on the fragile/ductile behaviour of the manufactured devices. A test bench was used to perform tensile tests according to ASTM D638 and bending tests according to ISO 178. The specimens were manufactured with nine different materials and five manufacturing technologies. Furthermore, specimens were created with different printing technologies, biocompatible materials, and printing orientations. The maximum allowable stress, rupture stress, flexural modulus, and deformation in each of the tested specimens were recorded. Results suggest that specimens manufactured with Stereolithography (SLA) and milling (polymethyl methacrylate PMMA) achieved high maximum allowable and rupture stress values. It was also observed that Polyjet printing and Selective Laser Sintering (SLS) technologies led to load-displacement curves with low maximum stress and high deformation values. Specimens manufactured with Digital Light Processing (DLP) technology showed intermediate and homogeneous performance. Finally, it was observed that the printing direction significantly influences the mechanical properties of the manufactured specimens in some cases.Universidad de Málag

Influence of dental malocclusion on body posture and foot posture in children: a cross-sectional study

The number of studies that investigate the correlations between the temporomandibular system and body posture, postural control, or the distribution of plantar pressure has recently been increasing. However, most of the existing information is not conclusive. Therefore, the study objective was to evaluate if the features of dental malocclusion are correlated with body posture alterations at the lower limb level. This is a multicentre cross-sectional study with 289 children (8–14 years). Angle’s molar relation was analysed at the dental level. The postural control and the plantar pressure distribution were recorded via a force platform. Correlation and inferential analysis between the Angle class and the foot’s biomechanics were tested. The centre of gravity is anteriorised in Angle’s Class II in both the molar class (p ≤ 0.001) and the canine class (p ≤ 0.001). Likewise, a relationship was observed between the contact surface and Angle’s classes, being higher in class III than in II (p ≤ 0.001). The plantigrade phase is shortened in Angle’s Class III. A relationship was found between Angle’s Class II and a forward movement of the centre of gravity. No relationship was found between the Foot Posture Index and the truncated scaphoid height and the dental classification. An evident relationship between the gait typology and dental malocclusion was not found

Yield and quality of hybrid tomato grafted and cultivated under shade mesh and greenhouse

The objective was to determine the yield, fruit quality and root development of four grafted tomato hybrids grown under anti-aphid mesh cover and greenhouse. The grafted hybrids were grown under shade mesh and greenhouse from april to november 2014. Variables evaluated were: fruit weight per plant, number of clusters per plant, number of fruits per plant, polar and equatorial fruit diameter, vitamin C and lycopene contents, and root fresh and dry weight. Hybrids grafted and cultivated under anti-aphid mesh had higher quality than the production obtained under greenhouse. However, lycopene and vitamin C contents and accumulated root system dry matter are greater under greenhous

Effect of Different Cytokinins on Shoot Outgrowth and Bioactive Compounds Profile of Lemograss Essential Oil

Lemongrass (Cymbopogon citratus) essential oil (EO) is a major source of bioactive compounds (BC) with anticancer activity such as α-citral, limonene, geraniol, geranyl acetate, and β-caryophyllene. Comparative studies about cytokinin effects on BC profiles in lemongrass are missing. Here, we evaluated four cytokinins (2iP, tZ, BAP, and KIN) in two different osmotic media, MS-N (3% sucrose, 3 g L−1 Gelrite™) and MS-S (5% sucrose, 5 g L−1 Gelrite™). It results in a higher multiplication rate in BAP containing medium compared to tZ, KIN, and 2iP (p ≤ 0.05). While shoots grown on MS-N/BAP, tZ, and KIN exhibited a highly branching morphology, MS-N/2iP produced a less branching architecture. BC profile analysis of established plants in pots revealed that their maxima production depends on the in vitro shoot growth conditions: i.e., highest content (80%) of α-citral in plants that were cultured in MS-S/BAP (p ≤ 0.05), limonene (41%) in MS-N/2iP, or geranyl acetate (25.79%) in MS-S/2iP. These results indicate that it is possible to increase or address the production of BC in lemongrass by manipulating the cytokinin type and osmotic pressure in culture media. The culture protocol described here is currently successfully applied for somatic embryogenesis induction and genetic transformation in lemongrass

Psychometric network analysis of the Patient Health Questionnaire-4 (PHQ-4) in Paraguayan general population

Background: Depression and anxiety are two of the most prevalent and disabling mental disorders worldwide, both in the general population and in outpatient clinical settings. Objective: This study aimed to analyze the psychometric properties of the Patient Health Questionnaire-4 (PHQ-4) based on network analysis metrics. Methods: A total of 911 Paraguayans (23.71% women and 76.29% men; mean age 31.25 years, SD = 10.63), selected by non-probabilistic convenience sampling, participated in the study. Network analysis was used to evaluate the internal structure, reliability, and measurement invariance between men and women. Results: The results revealed that the PHQ-4 is a unidimensional measure through Exploratory Graph Analysis (EGA). Reliability, through structural consistency, identified that 100% of the time, only a single dimension was obtained, and all items remained stable, as they were always replicated within the empirical dimension. The unidimensional structure has shown evidence of configural invariance; therefore, the network structure functioned equally among the different sex groups. Conclusion: The PHQ-4 presented optimal preliminary evidence of validity based on its internal structure, reliability, and invariance between sexes. Therefore, it may be useful as an accurate and brief measure of anxiety and depressive symptoms in the Paraguayan context

Dental Malocclusion and Its Relation to the Podal System

Background and Objective: This study analyzes the possibility that Stomatognathic and Postural systems are related by muscle chains. Malocclusion may influence the posture, contact between the foot and the ground, center of mass, footprint or vice-versa. This study aimed to verify whether there is a relationship between dental occlusion and podal system.Materials and Methods: A cross-cutting, descriptive study was carried out on 409 children (222 boys and 187 girls) between 8 and 14 years old. Dental occlusion was assessed on the sagittal plane (Angle's classification) the contact between the foot and the ground and the center of mass were evaluated using a stabilometric platform.Results: There was a statistically significant relationship between the plantigrade phase, the contact surface area and center of gravity. There was a prevalence of molar and canine Angle's class II malocclusion. In molar class II, an anterior center of gravity was predominant, in class I it was centered and in class III, it was posterior. There was significant correlation between malocclusions and the FPI (foot posture index) of the left foot and the height of the scaphoid in the right foot (P < 0.001).Conclusions: Some authors agree with our results. There is still much uncertainty in terms of showing a relationship between both systems. In addition, there is scarce scientific evidence on the topic. Some kind of relationship between the two systems has been proven. Studies that evaluate a group of subjects in a longitudinal manner are necessary to enable the changes taking place in both systems to be defined

Flow chart to diagnose the conditions installed in the periodontium

Las enfermedades gingivales y periodontales están catalogadas entre las afecciones más comunes del género humano, afectan los tejidos que protegen y soportan los dientes y una vez instaladas traen consigo la privación a los pacientes de su dentadura natural a edades tempranas, constituyen la segunda causa de pérdida dentaria. Realizamos este trabajo para que sirva de material de apoyo docente tanto para el pregrado como el posgrado en la carrera de Estomatología de forma tal que tanto en el nivel primario de salud como en el secundario se llegue a un diagnóstico certero de los diferentes procesos morbosos que se instalan en el periodonto.Gingival and periodontal diseases are listed among the most common human conditions, affecting the tissues that protect and support the teeth and once installed bring with them the deprivation of patients from their natural teeth at early ages, are the second cause of loss tooth. We perform this work to serve as a teaching support material for both undergraduate and postgraduate courses in Odontology in such a way that both at the primary health level and in the secondary level a correct diagnosis of the different morbid are installed in the periodontium