894 research outputs found
2D kinematics of the edge-on spiral galaxy ESO 379-G006
We present a kinematical study of the nearly edge-on galaxy ESO 379-G006 that
shows the existence of extraplanar ionized gas. With Fabry-Perot spectroscopy
at H-alpha, we study the kinematics of ESO 379-G006 using velocity maps and
position-velocity diagrams parallel to the major and to the minor axis of the
galaxy. We build the rotation curve of the disk and discuss the role of
projection effects due to the fact of viewing this galaxy nearly edge-on. The
twisting of the isovelocities in the radial velocity field of the disk of ESO
379-G006 as well as the kinematic asymmetries found in some position-velocity
diagrams parallel to the minor axis of the galaxy suggest the existence of
deviations to circular motions in the disk that can be modeled and explained
with the inclusion of a radial inflow probably generated by a bar or by spiral
arms. We succeeded in detecting extraplanar Diffuse Ionized Gas in this galaxy.
At the same time, from the analysis of position-velocity diagrams, we found
some evidence that the extraplanar gas could lag in rotation velocity with
respect to the midplane rotation.Comment: 61 pages, 15 figures. Accepted for publication in A
A stereospecific one-pot synthesis of ÎČ-chloro esters via the BiCl<inf>3</inf> catalysed O-acylative cleavage of crowded epoxides
© 2015, Science Reviews 2000 Ltd. All rights reserved. A simple, one-pot procedure is described for the stereospecific preparation of ÎČ-chloro esters from the corresponding crowded epoxide
A Validated Reversed-Phase HPLC Method for the Determination of Atorvastatin Calcium in Tablets
A Reversed-Phase Liquid Chromatographic (RP-LC) assay method was developed for the quantitative determination of atorvastatin calcium in the presence of its degradation products. The assay involved an isocratic elution of atorvastatin calcium in a LiChroCARTR 250*4 mm HPLC Cartridge LiChrospherR 100 RP-18 (5 ÎŒm) column using a mobile phase consisting of 0.1% acetic acid solution: acetonitrile (45:55, v/v), pH = 3.8. The flow rate was 0.8 mL/min and the analytes monitored at 246 nm. The assay method was found to be linear from 8.13 to 23.77 ÎŒg/mL. All the validation parameters were within the acceptance range. The developed method was successfully applied to estimate the amount of atorvastatin calcium in tablets.Fil: Simionato, Laura Daniela. Universidad de Buenos Aires. Facultad de Farmacia y BioquĂmica. Departamento de TecnologĂa FarmacĂ©utica; ArgentinaFil: Ferello, L.. Universidad de Buenos Aires. Facultad de Farmacia y BioquĂmica. Departamento de TecnologĂa FarmacĂ©utica; ArgentinaFil: Stamer. S.. Universidad de Buenos Aires. Facultad de Farmacia y BioquĂmica. Departamento de TecnologĂa FarmacĂ©utica; ArgentinaFil: Repetto, M. F.. Universidad de Buenos Aires. Facultad de Farmacia y BioquĂmica. Departamento de TecnologĂa FarmacĂ©utica; ArgentinaFil: Zubata, P. D.. Universidad de Buenos Aires. Facultad de Farmacia y BioquĂmica. Departamento de TecnologĂa FarmacĂ©utica; ArgentinaFil: Segall, Adriana Ines. Universidad de Buenos Aires. Facultad de Farmacia y BioquĂmica. Departamento de TecnologĂa FarmacĂ©utica; Argentina. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Oficina de CoordinaciĂłn Administrativa Houssay; Argentin
Second harmonic generation on self-assembled GaAs/Au nanowires with thickness gradient
Here we investigated the SH generation at the wavelength of 400 nm (pump laser at 800 nm, 120 fs pulses) of a "metasurface" composed by an alternation of GaAs nano-grooves and Au nanowires capping portions of flat GaAs. The nano-grooves depth and the Au nanowires thickness gradually vary across the sample. The samples are obtained by ion bombardment at glancing angle on a 150 nm Au mask evaporated on a GaAs plane wafer. The irradiation process erodes anisotropically the surface, creating Au nanowires and, at high ion dose, grooves in the underlying GaAs substrate (pattern transfer). The SHG measurements are performed for different pump linear polarization angle at different positions on the "metasurface" in order to explore the regions with optimal conditions for SHG efficiency. The pump polarization angle is scanned by rotating a half-wave retarder plate. While the output SH signal in reflection is analyzed by setting the polarizer in s or p configuration in front of the detector. The best polarization condition for SHG is obtained in the configuration where the pump and second harmonic fields are both p polarized, and the experiments show a SH polarization dependence of the same symmetry of bulk GaAs. Thus, the presence of gold contributes only as field localization effect, but do not contributes directly as SH generator
Critical boron-doping levels for generation of dislocations in synthetic diamond
Defects induced by boron doping in diamond layers were studied by transmission electron microscopy. The existence of a critical boron doping level above which defects are generated is reported. This level is found to be dependent on the CH4
/H2 molar ratios and on growth directions. The critical boron concentration lied in the 6.5â17.0 X 10 20 at/cm3 range in the direction and at 3.2 X 1021 at/cm
3 for the one. Strain related effects induced by the doping are shown not to
be responsible. From the location of dislocations and their Burger vectors, a model is proposed, together with their generation mechanism.6 page
Identification of material properties and optimal design of magnetically shielded rooms
In this paper, we propose an optimal design procedure for magnetically shielded rooms. Focusing on multi-layer ferromagnetic structures, where inner layers operate at very low magnetic field, we propose an identification method of the magnetic material characteristic in the Rayleigh region. A numerical model to simulate the shielding efficiency of a multi-layer ferromagnetic structure is presented and experimentally tested on different geometries and layer configurations. The fixed point iterative method is adopted to handle the nonlinearity of the magnetic material. In conclusion, the optimization of the design parameters of a MSR is discussed, using the Vector Immune System algorithm to minimize the magnetic field inside the room and the cost of the structure. The results highlight that a linear magnetic characteristic for the material is sufficient to identify the suitable geometry of the shield, but the nonlinear model in the Rayleigh region is of fundamental importance to determine a realistic shielding factor
Measurement of the Permanent Electric Dipole Moment of the Xe Atom
We report on a new measurement of the CP-violating permanent Electric Dipole
Moment (EDM) of the neutral Xe atom. Our experimental approach is based
on the detection of the free precession of co-located nuclear spin-polarized
He and Xe samples. The EDM measurement sensitivity benefits
strongly from long spin coherence times of several hours achieved in diluted
gases and homogeneous weak magnetic fields of about 400~nT. A finite EDM is
indicated by a change in the precession frequency, as an electric field is
periodically reversed with respect to the magnetic guiding field. Our result,
ecm, is consistent with zero and is
used to place a new upper limit on the Xe EDM: ecm (95% C.L.). We also discuss the implications of this result for
various CP-violating observables as they relate to theories of physics beyond
the standard model
- âŠ