45 research outputs found
Low Cost Planetary Exploration: Surrey Lunar Minisatellite and Interplanetary Platform Missions
In order to meet the growing global requirement for affordable missions beyond Low Earth Orbit, two types of platform are under design at the Surrey Space Centre. The first platform is a derivative of Surrey’s UoSAT-12 minisatellite, launched in April 1999 and operating successfully in-orbit. The minisatellite has been modified to accommodate a propulsion system capable of delivering up to 1700 m/s delta-V, enabling it to support a wide range of very low cost missions to LaGrange points, Near-Earth Objects, and the Moon. A mission to the Moon - dubbed “MoonShine” - is proposed as the first demonstration of the modified minisatellite beyond LEO. The second platform - Surrey’s Interplanetary Platform - has been designed to support missions with delta-V requirements up to 3200 m/s, making it ideal for low cost missions to Mars and Venus, as well as Near Earth Objects (NEOs) and other interplanetary trajectories. Analysis has proved mission feasibility, identifying key challenges in both missions for developing cost-effective techniques for: spacecraft propulsion; navigation; autonomous operations; and a reliable safe mode strategy. To reduce mission risk, inherently failure resistant lunar and interplanetary trajectories are under study. In order to significantly reduce cost and increase reliability, both platforms can communicate with low-cost ground stations and exploit Surrey’s experience in autonomous operations. The lunar minisatellite can provide up to 70 kg payload margin in lunar orbit for a total mission cost US25-50 M. Together, the platforms will enable regular flight of payloads to the Moon and interplanetary space at unprecedented low cost. This paper outlines key systems engineering issues for the proposed Lunar Minisatellite and Interplanetary Platform Missions, and describes the accommodation and performance offered to planetary payloads
Removal of phosphate from River water using a new baffle plates electrochemical reactor
During the last 50 years, the human activities have significantly altered the natural cycle of phosphate in this planet, causing phosphate to accumulate in the freshwater ecosystems of some countries to at least 75% greater than preindustrial levels, which indicates an urgent need to develop efficient phosphate treatment methods. Therefore, the current study investigates the removal of phosphate from river water using a new electrochemical cell (PBPR). This new cell utilises perforated baffle plates as a water mixer rather than magnetic stirrers that require power to work. This study investigates the influence of key operational parameters such as initial pH (ipH), current density (Ј), inter-electrode distance (ID), detention time (t) and initial phosphate concentration (IC) on the removal efficiency, and influence of the electrocoagulation process on the morphology of the surface of electrodes. Overall, the results showed that the new reactor was efficient enough to reduce the concentration of phosphate to the permissible limits. Additionally, SEM images showed that the Al anode became rough and nonuniform due to the production of aluminium hydroxides. The main advantages of the electrocoagulation technique are: 1- The EC method does not produce secondary pollutants as it does not required chemical additives, while other traditional treatment methods required either chemical or biological additives [[1], [2], [3], [4]]. 2- It has a large treatment capacity and a relatively short treatment time in comparison with other treatment methods, such as the biological methods [1,[5], [6], [7]]. 3- The EC method produces less sludge than traditional treatment traditional chemical and biological treatment methods [8,9]. EC technology, like any other treatment method, has some drawbacks that could limit its performance. For instance, it still has a clear deficiency in the variety of reactor design, and the electrodes should be periodically replaced as they dissolve into the solution due to the oxidation process [2,10]
The RemoveDebris ADR Mission: Preparing for an International Space Station Launch
International audienceSince the beginning of the space era, a significant amount of debris has progressively been generated in space. Active Debris Removal (ADR) missions have been suggested as a way of limiting and controlling future growth in orbital space debris by actively sending up vehicles to remove debris. The EC FP7 RemoveDebris mission, which started in 2013, draws on the expertise of some of Europe's most prominent space institutions in order to demonstrate key ADR technologies in a low-cost ambitious manner. The RemoveDebris mission launches to the International Space Station (ISS) in late 2017 where shortly after it will be deployed via the NanoRacks Kaber system into an orbit of around 400 km. The mission will perform its core demonstrations sequentially, utilising two CubeSats as artificial debris targets: net capture, harpoon capture, vision-based navigation , dragsail de-orbiting. The mission comes to an end in 2018 with all space entities having naturally de-orbited. This paper is split into the following parts: (a) an overview of the mission segments, (b) a discussion on launch procedures, (c) an overview of the operations sequence and demonstration timelines. The second section will focus on the specifics of the launch via NanoRacks and respective the NASA safety reviews. The third section will outline the planned operational timelines for the payloads. There will be a focus on what demonstrations will be performed and what types of data will be collected. The RemoveDebris mission aims to be one of the world's first in-orbit demonstrations of key technologies for active debris removal and is a vital prerequisite to achieving the ultimate goal of a cleaner Earth orbital environment
Electrocoagulation as a green technology for phosphate removal from River water
The current study investigates the removal of phosphate from water using a new baffle plates aluminium-based electrochemical cell (PBPR) taking consideration the influence of key operating parameters. This new cell utilises perforated baffle plates as a water mixer rather than magnetic stirrers that require extra power to work. As this unit is new, a comprehensive study has been carried to assess it performance. This study also includes preliminary estimates of the reactor’s operating costs, the amount of H2 gas produced and the yieldable energy from it. SEM (scanning electron microscope) was used to investigate the influence of the electrocoagulation process on the morphology of the surface of aluminium electrodes, and an empirical model developed to reproduce the phosphate removal process. The results showed that 99% of phosphate was removed within 60 minutes of electrolysis at an initial pH (ipH) of 6, inter-electrode distance (ID) of 0.5 cm, current density (J) of 6 mA/cm2, initial concentration of phosphate (IC) of 100 mg/L, and minimum operating cost of 0.503 US $/m3. The electrochemical cell produced enough H2 gas to generate 4.34 kWh/m3 of power. Statistically, it was proved that the influence of the operating parameters on phosphate removal could be modelled with an R2 of 0.882, the influence of these operating parameters on phosphate removal following the order: t>J>IC>ipH >ID. Finally, SEM images showed that after several electrolysing runs, the Al anode became rough and nonuniform which could be related to the production of aluminium hydroxides
Improving the efficiency and effectiveness of an industrial SARS-CoV-2 diagnostic facility.
On 11th March 2020, the UK government announced plans for the scaling of COVID-19 testing, and on 27th March 2020 it was announced that a new alliance of private sector and academic collaborative laboratories were being created to generate the testing capacity required. The Cambridge COVID-19 Testing Centre (CCTC) was established during April 2020 through collaboration between AstraZeneca, GlaxoSmithKline, and the University of Cambridge, with Charles River Laboratories joining the collaboration at the end of July 2020. The CCTC lab operation focussed on the optimised use of automation, introduction of novel technologies and process modelling to enable a testing capacity of 22,000 tests per day. Here we describe the optimisation of the laboratory process through the continued exploitation of internal performance metrics, while introducing new technologies including the Heat Inactivation of clinical samples upon receipt into the laboratory and a Direct to PCR protocol that removed the requirement for the RNA extraction step. We anticipate that these methods will have value in driving continued efficiency and effectiveness within all large scale viral diagnostic testing laboratories
Multiorgan MRI findings after hospitalisation with COVID-19 in the UK (C-MORE): a prospective, multicentre, observational cohort study
Introduction:
The multiorgan impact of moderate to severe coronavirus infections in the post-acute phase is still poorly understood. We aimed to evaluate the excess burden of multiorgan abnormalities after hospitalisation with COVID-19, evaluate their determinants, and explore associations with patient-related outcome measures.
Methods:
In a prospective, UK-wide, multicentre MRI follow-up study (C-MORE), adults (aged ≥18 years) discharged from hospital following COVID-19 who were included in Tier 2 of the Post-hospitalisation COVID-19 study (PHOSP-COVID) and contemporary controls with no evidence of previous COVID-19 (SARS-CoV-2 nucleocapsid antibody negative) underwent multiorgan MRI (lungs, heart, brain, liver, and kidneys) with quantitative and qualitative assessment of images and clinical adjudication when relevant. Individuals with end-stage renal failure or contraindications to MRI were excluded. Participants also underwent detailed recording of symptoms, and physiological and biochemical tests. The primary outcome was the excess burden of multiorgan abnormalities (two or more organs) relative to controls, with further adjustments for potential confounders. The C-MORE study is ongoing and is registered with ClinicalTrials.gov, NCT04510025.
Findings:
Of 2710 participants in Tier 2 of PHOSP-COVID, 531 were recruited across 13 UK-wide C-MORE sites. After exclusions, 259 C-MORE patients (mean age 57 years [SD 12]; 158 [61%] male and 101 [39%] female) who were discharged from hospital with PCR-confirmed or clinically diagnosed COVID-19 between March 1, 2020, and Nov 1, 2021, and 52 non-COVID-19 controls from the community (mean age 49 years [SD 14]; 30 [58%] male and 22 [42%] female) were included in the analysis. Patients were assessed at a median of 5·0 months (IQR 4·2–6·3) after hospital discharge. Compared with non-COVID-19 controls, patients were older, living with more obesity, and had more comorbidities. Multiorgan abnormalities on MRI were more frequent in patients than in controls (157 [61%] of 259 vs 14 [27%] of 52; p<0·0001) and independently associated with COVID-19 status (odds ratio [OR] 2·9 [95% CI 1·5–5·8]; padjusted=0·0023) after adjusting for relevant confounders. Compared with controls, patients were more likely to have MRI evidence of lung abnormalities (p=0·0001; parenchymal abnormalities), brain abnormalities (p<0·0001; more white matter hyperintensities and regional brain volume reduction), and kidney abnormalities (p=0·014; lower medullary T1 and loss of corticomedullary differentiation), whereas cardiac and liver MRI abnormalities were similar between patients and controls. Patients with multiorgan abnormalities were older (difference in mean age 7 years [95% CI 4–10]; mean age of 59·8 years [SD 11·7] with multiorgan abnormalities vs mean age of 52·8 years [11·9] without multiorgan abnormalities; p<0·0001), more likely to have three or more comorbidities (OR 2·47 [1·32–4·82]; padjusted=0·0059), and more likely to have a more severe acute infection (acute CRP >5mg/L, OR 3·55 [1·23–11·88]; padjusted=0·025) than those without multiorgan abnormalities. Presence of lung MRI abnormalities was associated with a two-fold higher risk of chest tightness, and multiorgan MRI abnormalities were associated with severe and very severe persistent physical and mental health impairment (PHOSP-COVID symptom clusters) after hospitalisation.
Interpretation:
After hospitalisation for COVID-19, people are at risk of multiorgan abnormalities in the medium term. Our findings emphasise the need for proactive multidisciplinary care pathways, with the potential for imaging to guide surveillance frequency and therapeutic stratification
Recommended from our members
The ATLAS inner detector trigger performance in pp collisions at 13 TeV during LHC Run 2
The design and performance of the inner detector trigger for the high level
trigger of the ATLAS experiment at the Large Hadron Collider during the 2016-18
data taking period is discussed. In 2016, 2017, and 2018 the ATLAS detector
recorded 35.6 fb, 46.9 fb, and 60.6 fb respectively of
proton-proton collision data at a centre-of-mass energy of 13 TeV. In order to
deal with the very high interaction multiplicities per bunch crossing expected
with the 13 TeV collisions the inner detector trigger was redesigned during the
long shutdown of the Large Hadron Collider from 2013 until 2015. An overview of
these developments is provided and the performance of the tracking in the
trigger for the muon, electron, tau and -jet signatures is discussed. The
high performance of the inner detector trigger with these extreme interaction
multiplicities demonstrates how the inner detector tracking continues to lie at
the heart of the trigger performance and is essential in enabling the ATLAS
physics programme
The ATLAS inner detector trigger performance in pp collisions at 13 TeV during LHC Run 2
The design and performance of the inner detector trigger for the high level
trigger of the ATLAS experiment at the Large Hadron Collider during the 2016-18
data taking period is discussed. In 2016, 2017, and 2018 the ATLAS detector
recorded 35.6 fb, 46.9 fb, and 60.6 fb respectively of
proton-proton collision data at a centre-of-mass energy of 13 TeV. In order to
deal with the very high interaction multiplicities per bunch crossing expected
with the 13 TeV collisions the inner detector trigger was redesigned during the
long shutdown of the Large Hadron Collider from 2013 until 2015. An overview of
these developments is provided and the performance of the tracking in the
trigger for the muon, electron, tau and -jet signatures is discussed. The
high performance of the inner detector trigger with these extreme interaction
multiplicities demonstrates how the inner detector tracking continues to lie at
the heart of the trigger performance and is essential in enabling the ATLAS
physics programme
Recommended from our members
Observation of electroweak production of two jets in association with an isolated photon and missing transverse momentum, and search for a Higgs boson decaying into invisible particles at 13 TeV with the ATLAS detector
This paper presents the measurement of the electroweak production of two jets
in association with a pair with the boson decaying into two
neutrinos. It also presents the search for invisible or partially invisible
decays of a Higgs boson with a mass of 125 GeV produced through vector-boson
fusion with a photon in the final state. These results use data from LHC
proton-proton collisions at = 13 TeV collected with the ATLAS
detector corresponding to an integrated luminosity of 139 fb. The event
signature, shared by all benchmark processes considered for measurements and
searches, is characterized by a significant amount of unbalanced transverse
momentum and a photon in the final state, in addition to a pair of forward
jets. For electroweak production of in association with two jets, the
background-only hypothesis is rejected with an observed (expected) significance
of 5.2 (5.1) standard deviations. The measured fiducial cross-section for this
process is 1.310.29 fb. Observed (expected) upper limit of 0.37 (0.34) at
95% confidence level is set on the branching ratio of a 125 GeV Higgs boson to
invisible particles, assuming the Standard Model production cross-section. The
signature is also interpreted in the context of decays of a Higgs boson to a
photon and a dark photon. An observed (expected) 95% CL upper limit on the
branching ratio for this decay is set at 0.018 (0.017), assuming the 125 GeV
Standard Model Higgs boson production cross-section
Hydrological modeling of stalagmite δ 18 O response to glacial-interglacial transitions
Stalagmite delta O-18 series currently provide the most robustly dated characterization of glacial terminations. However, uncertainties associated with the stalagmite delta O-18 proxy record arise due to the complexity of flow within karst aquifers. Here we use an integrated climate-soil-groundwater lumped parameter hydrological model to demonstrate the range of potential stalagmite delta O-18 hydrological responses to significant global climate changes. Pseudoproxy stalagmite delta O-18 series were generated for millennial length model simulations, using general circulation model time-slice data for 12, 11, and 10ka for eastern China. Our model demonstrates that the variability within published delta O-18 records from Chinese stalagmites falls within that of modeled pseudoproxy series. We utilize model output to (i) quantify hydrological uncertainty (specifically the relative importance of changing precipitation amount, isotopic composition, and water balance); (ii) identify any nonstationarity in delta O-18 variability and its relationship to climate change; and (iii) demonstrate the processes that produce low-frequency power in stalagmite delta O-18