Monitoring the impact of desert dust outbreaks for air quality for health studies

We review the major features of desert dust outbreaks that are relevant to the assessment of dust impacts upon human health. Our ultimate goal is to provide scientific guidance for the acquisition of relevant population exposure information for epidemiological studies tackling the short and long term health effects of desert dust. We first describe the source regions and the typical levels of dust particles in regions close and far away from the source areas, along with their size, composition, and bio-aerosol load. We then describe the processes by which dust may become mixed with anthropogenic particulate matter (PM) and/or alter its load in receptor areas. Short term health effects are found during desert dust episodes in different regions of the world, but in a number of cases the results differ when it comes to associate the effects to the bulk PM, the desert dust-PM, or non-desert dust-PM. These differences are likely due to the different monitoring strategies applied in the epidemiological studies, and to the differences on atmospheric and emission (natural and anthropogenic) patterns of desert dust around the world. We finally propose methods to allow the discrimination of health effects by PM fraction during dust outbreaks, and a strategy to implement desert dust alert and monitoring systems for health studies and air quality management.The systematic review was funded by WHO with as part of a Grant Agreement with Ministry of Foreign Affairs, Norway. Thanks are also given to the Spanish Ministry for the Ecological Transition for long term support in the last 2 decades to our projects on African dust effects on air quality over Spain; to the Spanish Ministry of Science, Innovation and Universities and FEDER Funds for the HOUSE project (CGL2016-78594-R), and to the Generalitat de Catalunya (AGAUR 2017 SGR41). Carlos Pérez García-Pando acknowledges long-term support from the AXA Research Fund, as well as the support received through the Ramón y Cajal program (grant RYC-2015-18690) of the Spanish Ministry of Science, Innovation and Universities.Peer ReviewedPostprint (published version

Decays Z' -> \gamma\gamma\gamma{} and Z -> \gamma\gamma\gamma{} in the minimal 331 model

The possibility of a significant effect of exotic particles on the Z'->\gamma\gamma\gamma{} and Z->\gamma\gamma\gamma{} decays is investigated in the context of the minimal 331 model. This model, which is based in the SU_C(3)xSU_L(3)xU_X(1) gauge group, predicts the existence of many exotic charged particles that can significantly enhance the decay widths. It is found that the standard model prediction for the Z->\gamma\gamma\gamma{} decay remains essentially unchanged, as the new physics effects quickly decouples. On the other hand, it is found that the contributions of the new exotic quarks and gauge bosons predicted by this model lead to a branching fraction for the Z'->\gamma\gamma\gamma{} decay of about 10^(-6), which is about three orders of magnitude larger than that of the Z->\gamma\gamma\gamma{} decay.Comment: 20 pages and 20 figure

Double-electron ionization driven by inhomogeneous fields

Authors may self-archive the author’s accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/ she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be provided by inserting the DOI number of the article in the following sentence: “The final publication is available at Springer via https://link.springer.com/article/10.1007/s00340-017-6672-4"Electron–electron correlation effects play a crucial role in our understanding of sequential (SDI) and non-sequential double ionization (NSDI) mechanisms. Here, we present a theoretical study of NSDI driven by plasmonic-enhanced spatial inhomogeneous fields. By numerically solving the time-dependent Schrödinger equation for a linear reduced model of He and a double-electron time-evolution probability analysis, we provide evidence for enhancement effects in NSDI showing that the double ionization yield at lower laser peak intensities is increased due to the spatial inhomogeneous character of plasmonic-enhanced field. The change in the emission direction of the double-ion as a function of the field inhomogeneity degree demonstrates that plasmonic-enhanced fields could configure a reliable instrument to control the ion emission. Furthermore, our quantum mechanical model, as well as classical trajectory Monte Carlo simulations, show that inhomogeneous fields are as well as a useful tool for splitting the binary and recoil processes in the rescattering scenario.This work was supported by the project ELI-Extreme Light Infrastructure-phase 2 (Project No. CZ.02.1.01/0.0/0.0/ 15_008/0000162) from European Regional Development Fund, Spanish MINECO (National Plan grants FIS2011-30465-C02-01, FOQUS No. FIS2013-46768-P, FISICATEAMO FIS2016-79508-P and Severo Ochoa Excellence Grant No. SEV-2015-0522), the Generalitat de Catalunya (SGR 874 and CERCA/Program) and Fundació Privada Cellex Barcelona. N.S. was supported by the Erasmus Mundus Doctorate Program Europhotonics (Grant No. 159224-1-2009-1-FR-ERA MUNDUS-EMJD). N.S., A.C., and M.L. acknowledge ERC AdG OSYRIS, EU FETPRO QUIC and National Science Centre, Poland—Symfonia Grant 2016/20/W/ST4/00314. A. S. L. acknowledges Max Planck Center for Attosecond Science (MPC-AS). J. A. P.-H. acknowledges to the Spanish Ministerio de Economía y Competitivi- dad (FURIAM Project No. FIS2013-47741-R and PALMA project FIS2016- 81056-R) and Laserlab-Europe (EU-H2020 654148). L.O. acknowledges valuable input from Andre Staudte. The authors thankfully acknowledge the computer resources at MareNostrum, technical expertise and assistance provided by the Barcelona Supercomputing Center and the Red Española de Supercomputación (RES)Peer ReviewedPostprint (author's final draft

Agent-based spatiotemporal simulation of biomolecular systems within the open source MASON framework

Agent-based modelling is being used to represent biological systems with increasing frequency and success. This paper presents the implementation of a new tool for biomolecular reaction modelling in the open source Multiagent Simulator of Neighborhoods framework. The rationale behind this new tool is the necessity to describe interactions at the molecular level to be able to grasp emergent and meaningful biological behaviour. We are particularly interested in characterising and quantifying the various effects that facilitate biocatalysis. Enzymes may display high specificity for their substrates and this information is crucial to the engineering and optimisation of bioprocesses. Simulation results demonstrate that molecule distributions, reaction rate parameters, and structural parameters can be adjusted separately in the simulation allowing a comprehensive study of individual effects in the context of realistic cell environments. While higher percentage of collisions with occurrence of reaction increases the affinity of the enzyme to the substrate, a faster reaction (i.e., turnover number) leads to a smaller number of time steps. Slower diffusion rates and molecular crowding (physical hurdles) decrease the collision rate of reactants, hence reducing the reaction rate, as expected. Also, the random distribution of molecules affects the results significantly.The authors thank the Agrupamento INBIOMED from DXPCTSUG-FEDER unha maneira de facer Europa (2012/273). The research leading to these results has received funding from the European Union's Seventh Framework Programme FP7/REGPOT-2012-2013.1 under Grant Agreement no. 316265 (BIOCAPS) and the [14VI05] Contract-Programme from the University of Vigo. This document reflects only the authors' views and the European Union is not liable for any use that may be made of the information contained herein

A wearable wireless sensor network for indoor smart environment monitoring in safety applications

This paper presents the implementation of a wearable wireless sensor network aimed at monitoring harmful gases in industrial environments. The proposed solution is based on a customized wearable sensor node using a low-power low-rate wireless personal area network (LR-WPAN) communications protocol, which as a first approach measures CO2 concentration, and employs different low power strategies for appropriate energy handling which is essential to achieving long battery life. These wearables nodes are connected to a deployed static network and a web-based application allows data storage, remote control and monitoring of the complete network. Therefore, a complete and versatile remote web application with a locally implemented decision-making system is accomplished, which allows early detection of hazardous situations for exposed workers

Interaction Effects on the Magneto-optical Response of Magnetoplasmonic Dimers

The effect that dipole-dipole interactions have on the magneto-optical (MO) properties of magnetoplasmonic dimers is theoretically studied. The specific plasmonic versus magnetoplasmonic nature of the dimer's metallic components and their specific location within the dimer plays a crucial role on the determination of these properties. We find that it is possible to generate an induced MO activity in a purely plasmonic component, even larger than that of the MO one, therefore dominating the overall MO spectral dependence of the system. Adequate stacking of these components may allow obtaining, for specific spectral regions, larger MO activities in systems with reduced amount of MO metal and therefore with lower optical losses. Theoretical results are contrasted and confirmed with experiments for selected structures

Modification of HF-treated silicon (100) surfaces by scanning tunneling microscopy in air under imaging conditions

The modification of HF-etched silicon (100) surface with a scanning tunneling microscope(STM) operated in air is studied for the first time in samples subjected to the standard HF etching without the follow-up rinsing in H2O. The modifications are produced in air under normal STM imaging conditions (V t =−1.4 V and I t =2 nA). The simultaneous acquisition of topographical, current image tunneling spectroscopy and local barrier-height images clearly shows that the nature of the modification is not only topographical but also chemical. The features produced with a resolution better than 25 nm are attributed to a tip-induced oxidation enhanced by the presence of fluorine on the surface

Nanoscale phase-engineering of thermal transport with a Josephson heat modulator

Macroscopic quantum phase coherence has one of its pivotal expressions in the Josephson effect [1], which manifests itself both in charge [2] and energy transport [3-5]. The ability to master the amount of heat transferred through two tunnel-coupled superconductors by tuning their phase difference is the core of coherent caloritronics [4-6], and is expected to be a key tool in a number of nanoscience fields, including solid state cooling [7], thermal isolation [8, 9], radiation detection [7], quantum information [10, 11] and thermal logic [12]. Here we show the realization of the first balanced Josephson heat modulator [13] designed to offer full control at the nanoscale over the phase-coherent component of thermal currents. Our device provides magnetic-flux-dependent temperature modulations up to 40 mK in amplitude with a maximum of the flux-to-temperature transfer coefficient reaching 200 mK per flux quantum at a bath temperature of 25 mK. Foremost, it demonstrates the exact correspondence in the phase-engineering of charge and heat currents, breaking ground for advanced caloritronic nanodevices such as thermal splitters [14], heat pumps [15] and time-dependent electronic engines [16-19].Comment: 6+ pages, 4 color figure