Hydrodynamic changes due to large seabed installations in coastal waters off west coast of India

Offshore marine environment can very well be utilized for mass storage of liquids which are not harmful to that environment. Improper placement of large tanks on the seabed, to store large quantities of liquids, would adversely affect the hydrodynamics of adjoining environment. Thorough understanding on the hydrodynamics of the adjoining environment is thus required before and after placing such tanks so as to properly plan the placement of these large tanks. A two dimensional numerical hydrodynamic model is used to study influence of placing large number of tanks in a dynamic marine environment. Cylindrical tanks (5 m dia.) are arranged in three rows with 50 tanks placed in each row with their length (100 m) aligned perpendicular to the coast. These tanks cover an area of about 36000 m2 and are placed on seabed in water depths about 15 m. Hydrodynamic simulations carried out with tidal forcing for cases of (a) before and (b) after placement of tanks showed that current speeds increase up to 65% in the region where the tanks are placed compared to currents without placement of tanks. However, up to 85% increase in current speeds is observed in regions beyond the tanks. In this manuscript results of the effects on the hydrodynamics of a region due to placing large number of tanks in shallow waters are presented

In vitro screening of white Jute (Corchorus capsularis L) against salinity stress

The environmental stress such as salinity of soil or water is serious threat for field crops in the world, especially in arid and semiarid regions. To study salinity stress on jute (Corchorus capsularis), an experiment was laid out in factorial randomized block design keeping nine capsularis varieties (JRC-698, JRC-321, JRC-517, JRC-7447, JBC-5, JRC-212, JRC-80, JRC-532 and UPC-94) as one factor and four levels of salt concentrations i.e. control (Distilled H2O), 100, 160, 240 and 300 mM NaCl with three replications. Adverse effect of salinity increased with increasing concentration of sodium chloride. Among nine jute varieties the highest germination percentage (89.5%), root length (0.6 cm), shoot length (1.2 cm), fresh weight (93 mg) and dry weight (9.5 mg) of seedling were observed in ‘JRC-698’ at salt concentration at 160 mM NaCl as compared with other salt concentration. All growth parameters were recorded higher in control than other treatments. All growth parameters were decreased up to 240 mM NaCl concentration and it was completely inhibited at 300 mM NaCl. Variety ‘UPC-94’ was the most susceptible to salinity stress. Hence, white jute varieties, JRC-698 and JRC-517 can be grown at 160 mM NaCl concentration

Chemoselective hydrogenation of aromatic nitro compounds using diammonium hydrogen phosphite and commercial zinc dust

The aromatic nitro compounds are reduced to their corresponding amines at room temperature in good yields by employing diammonium hydrogen phosphite as hydrogen donor and zinc as catalyst. The hydrogenation is fast and selective in the presence of the other sensitive functionalities such as halogens, -OH, -NH2, -OCH3, -CN, -COCH3, -COOH, -COOR etc. It was observed that, this system is equally competitive with existing methods

Spin Transition Sensors Based on β-Amino-Acid 1,2,4-Triazole Derivative

A β-aminoacid ester was successfully derivatized to yield to 4H-1,2-4-triazol-4-yl-propionate (βAlatrz) which served as a neutral bidentate ligand in the 1D coordination polymer [Fe(βAlatrz)3](CF3SO3)2·0.5H2O (1·0.5H2O). The temperature dependence of the high-spin molar fraction derived from 57Fe Mossbauer spectroscopy recorded on cooling below room temperature reveals an exceptionally abrupt single step transition between high-spin and low-spin states with a hysteresis loop of width 4 K (Tc↑ = 232 K and Tc↓ = 228 K) in agreement with magnetic susceptibility measurements. The material presents striking reversible thermochromism from white, at room temperature, to pink on quench cooling to liquid nitrogen, and acts as an alert towards temperature variations. The phase transition is of first order, as determined by differential scanning calorimetry, with transition temperatures matching the ones determined by SQUID and Mössbauer spectroscopy. The freshly prepared sample of 1·0.5H2O, dried in air, was subjected to annealing at 390 K, and the obtained white compound [Fe(βAlatrz)3](CF3SO3)2 (1) was found to exhibit a similar spin transition curve however much temperature was increased by (Tc↑ = 252 K and Tc↓ = 248 K). The removal of lattice water molecules from 1·0.5H2O is not accompanied by a change of the morphology and of the space group, and the chain character is preserved. However, an internal pressure effect stabilizing the low-spin state is evidenced

Recent Innovations in Footwear and the Role of Smart Footwear in Healthcare—A Survey

© 2024 The Author(s). Licensee MDPI, Basel, Switzerland. This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY), https://creativecommons.org/licenses/by/4.0/Smart shoes have ushered in a new era of personalised health monitoring and assistive technologies. Smart shoes leverage technologies such as Bluetooth for data collection and wireless transmission, and incorporate features such as GPS tracking, obstacle detection, and fitness tracking. As the 2010s unfolded, the smart shoe landscape diversified and advanced rapidly, driven by sensor technology enhancements and smartphones’ ubiquity. Shoes have begun incorporating accelerometers, gyroscopes, and pressure sensors, significantly improving the accuracy of data collection and enabling functionalities such as gait analysis. The healthcare sector has recognised the potential of smart shoes, leading to innovations such as shoes designed to monitor diabetic foot ulcers, track rehabilitation progress, and detect falls among older people, thus expanding their application beyond fitness into medical monitoring. This article provides an overview of the current state of smart shoe technology, highlighting the integration of advanced sensors for health monitoring, energy harvesting, assistive features for the visually impaired, and deep learning for data analysis. This study discusses the potential of smart footwear in medical applications, particularly for patients with diabetes, and the ongoing research in this field. Current footwear challenges are also discussed, including complex construction, poor fit, comfort, and high cost.Peer reviewe

Survey of green mussel seed resources of Kerala and Karnataka

Farming of marine mussels Is practiced extensively in the temperate and Southeast Asian countries. In India two species of mussels, Perna viridis and Perna indica commonly known as the green and brown mussels respectively have been reported

Understanding our seas: National Institute of Oceanography, Goa

The present article summarizes the research done at the CSIR–National Institute of Oceanography in 2014 in ocean science, resources and technology. Significant research has been conducted on air–sea interactions and coastal circulation, biogeochemistry, biology, marine geophysics, palaeoceanography, marine fishery, gas hydrates and wave energy. Technological advances covered topics like oceanographic tools. Major strides have been made in marine resources research and evaluation

Understanding our seas: National Institute of Oceanography, Goa

The present article summarizes the research done at the CSIR–National Institute of Oceanography in 2014 in ocean science, resources and technology. Significant research has been conducted on air–sea interactions and coastal circulation, biogeochemistry, biology, marine geophysics, palaeoceanography, marine fishery, gas hydrates and wave energy. Technological advances covered topics like oceanographic tools. Major strides have been made in marine resources research and evaluation

Prevalence and attributable health burden of chronic respiratory diseases, 1990–2017 : a systematic analysis for the Global Burden of Disease Study 2017

Background Previous attempts to characterise the burden of chronic respiratory diseases have focused only on specific disease conditions, such as chronic obstructive pulmonary disease (COPD) or asthma. In this study, we aimed to characterise the burden of chronic respiratory diseases globally, providing a comprehensive and up-to-date analysis on geographical and time trends from 1990 to 2017. Methods Using data from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017, we estimated the prevalence, morbidity, and mortality attributable to chronic respiratory diseases through an analysis of deaths, disability-adjusted life-years (DALYs), and years of life lost (YLL) by GBD super-region, from 1990 to 2017, stratified by age and sex. Specific diseases analysed included asthma, COPD, interstitial lung disease and pulmonary sarcoidosis, pneumoconiosis, and other chronic respiratory diseases. We also assessed the contribution of risk factors (smoking, second-hand smoke, ambient particulate matter and ozone pollution, household air pollution from solid fuels, and occupational risks) to chronic respiratory disease-attributable DALYs. Findings In 2017, 544.9 million people (95% uncertainty interval [UI] 506.9- 584.8) worldwide had a chronic respiratory disease, representing an increase of 39.8% compared with 1990. Chronic respiratory disease prevalence showed wide variability across GBD super-regions, with the highest prevalence among both males and females in high-income regions, and the lowest prevalence in sub-Saharan Africa and south Asia. The age-sex- specific prevalence of each chronic respiratory disease in 2017 was also highly variable geographically. Chronic respiratory diseases were the third leading cause of death in 2017 (7.0% [95% UI 6.8-7 .2] of all deaths), behind cardiovascular diseases and neoplasms. Deaths due to chronic respiratory diseases numbered 3 914 196 (95% UI 3 790 578-4 044 819) in 2017, an increase of 18.0% since 1990, while total DALYs increased by 13.3%. However, when accounting for ageing and population growth, declines were observed in age-standardised prevalence (14.3% decrease), agestandardised death rates (42.6%), and age-standardised DALY rates (38.2%). In males and females, most chronic respiratory disease-attributable deaths and DALYs were due to COPD. In regional analyses, mortality rates from chronic respiratory diseases were greatest in south Asia and lowest in sub-Saharan Africa, also across both sexes. Notably, although absolute prevalence was lower in south Asia than in most other super-regions, YLLs due to chronic respiratory diseases across the subcontinent were the highest in the world. Death rates due to interstitial lung disease and pulmonary sarcoidosis were greater than those due to pneumoconiosis in all super-regions. Smoking was the leading risk factor for chronic respiratory disease-related disability across all regions for men. Among women, household air pollution from solid fuels was the predominant risk factor for chronic respiratory diseases in south Asia and sub-Saharan Africa, while ambient particulate matter represented the leading risk factor in southeast Asia, east Asia, and Oceania, and in the Middle East and north Africa super-region. Interpretation Our study shows that chronic respiratory diseases remain a leading cause of death and disability worldwide, with growth in absolute numbers but sharp declines in several age-standardised estimators since 1990. Premature mortality from chronic respiratory diseases seems to be highest in regions with less-resourced health systems on a per-capita basis